diff options
Diffstat (limited to 'board/freescale')
| -rw-r--r-- | board/freescale/p2020ds/law.c | 8 | ||||
| -rw-r--r-- | board/freescale/p2020ds/p2020ds.c | 105 |
2 files changed, 2 insertions, 111 deletions
diff --git a/board/freescale/p2020ds/law.c b/board/freescale/p2020ds/law.c index 28ed2ed..91642a9 100644 --- a/board/freescale/p2020ds/law.c +++ b/board/freescale/p2020ds/law.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2008-2010 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -29,12 +29,6 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_2), - SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), - SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_3), - SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3), SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), }; diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index 40589da..8546aa9 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -155,113 +155,10 @@ phys_size_t fixed_sdram(void) #endif -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif - -#ifdef CONFIG_PCIE2 -static struct pci_controller pcie2_hose; -#endif - -#ifdef CONFIG_PCIE3 -static struct pci_controller pcie3_hose; -#endif - #ifdef CONFIG_PCI void pci_init_board(void) { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - struct fsl_pci_info pci_info[3]; - u32 devdisr, pordevsr, io_sel; - int first_free_busno = 0; - int num = 0; - - int pcie_ep, pcie_configured; - - devdisr = in_be32(&gur->devdisr); - pordevsr = in_be32(&gur->pordevsr); - io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - - debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); - - puts("\n"); -#ifdef CONFIG_PCIE2 - pcie_configured = is_serdes_configured(PCIE2); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)) { - SET_STD_PCIE_INFO(pci_info[num], 2); - pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf("PCIE2: connected to ULI as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); - - /* - * The workaround doesn't work on p2020 because the location - * we try and read isn't valid on p2020, fix this later - */ -#if 0 - /* - * Activate ULI1575 legacy chip by performing a fake - * memory access. Needed to make ULI RTC work. - * Device 1d has the first on-board memory BAR. - */ - - pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0), - PCI_BASE_ADDRESS_1, &temp32); - if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) { - void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0), - temp32, 4, 0); - debug(" uli1575 read to %p\n", p); - in_be32(p); - } -#endif - } else { - printf("PCIE2: disabled\n"); - } - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ -#endif - -#ifdef CONFIG_PCIE3 - pcie_configured = is_serdes_configured(PCIE3); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)) { - SET_STD_PCIE_INFO(pci_info[num], 3); - pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); - printf("PCIE3: connected to Slot 1 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie3_hose, first_free_busno); - } else { - printf("PCIE3: disabled\n"); - } - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */ -#endif - -#ifdef CONFIG_PCIE1 - pcie_configured = is_serdes_configured(PCIE1); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) { - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - printf("PCIE1: disabled\n"); - } - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ -#endif + fsl_pcie_init_board(0); } #endif |