diff options
Diffstat (limited to 'board/freescale')
63 files changed, 9137 insertions, 21 deletions
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile new file mode 100644 index 0000000..44f613e --- /dev/null +++ b/board/freescale/common/Makefile @@ -0,0 +1,56 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)board/$(VENDOR)/common) +endif + +LIB = $(obj)lib$(VENDOR).a + +COBJS := sys_eeprom.o \ + pixis.o \ + pq-mds-pib.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c index af98157..fd99a93 100644 --- a/board/freescale/common/pixis.c +++ b/board/freescale/common/pixis.c @@ -25,8 +25,9 @@ #include <common.h> #include <command.h> #include <watchdog.h> -#include <asm/cache.h> +#ifdef CONFIG_FSL_PIXIS +#include <asm/cache.h> #include "pixis.h" @@ -321,10 +322,10 @@ static ulong strfractoint(uchar *strptr) mulconst = 1; for (i = 0; i < decarr_len; i++) mulconst *= 10; - decval = simple_strtoul(decarr, NULL, 10); + decval = simple_strtoul((char *)decarr, NULL, 10); } - intval = simple_strtoul(intarr, NULL, 10); + intval = simple_strtoul((char *)intarr, NULL, 10); intval = intval * mulconst; retval = intval + decval; @@ -362,7 +363,7 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10)); - corepll = strfractoint(argv[3]); + corepll = strfractoint((uchar *)argv[3]); val = val + set_px_corepll(corepll); val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10)); if (val == 3) { @@ -410,7 +411,7 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) read_from_px_regs(0); read_from_px_regs_altbank(0); val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10)); - corepll = strfractoint(argv[4]); + corepll = strfractoint((uchar *)argv[4]); val = val + set_px_corepll(corepll); val = val + set_px_mpxpll(simple_strtoul(argv[5], NULL, 10)); @@ -470,3 +471,4 @@ U_BOOT_CMD( " pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n" " pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n" ); +#endif /* CONFIG_FSL_PIXIS */ diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c new file mode 100644 index 0000000..d79f2eb --- /dev/null +++ b/board/freescale/common/pq-mds-pib.c @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * Tony Li <tony.li@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + */ + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> + +#ifdef CONFIG_PQ_MDS_PIB + +#include "pq-mds-pib.h" + +int pib_init(void) +{ + u8 val8; + u8 orig_i2c_bus; + + /* Switch temporarily to I2C bus #2 */ + orig_i2c_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); + + val8 = 0; +#if defined(CONFIG_PCI) && !defined(CONFIG_PCISLAVE) + /* Assign PIB PMC slot to desired PCI bus */ + i2c_write(0x23, 0x6, 1, &val8, 1); + i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x23, 0x2, 1, &val8, 1); + i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + i2c_write(0x26, 0x7, 1, &val8, 1); +#if defined(CONFIG_MPC832XEMDS) + val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */ +#else + val8 = 0xf3; /* PMC1, PMC2, PMC3 slot to PCI bus */ +#endif + i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x26, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x27, 0x6, 1, &val8, 1); + i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + i2c_write(0x27, 0x3, 1, &val8, 1); + + eieio(); + +#if defined(CONFIG_MPC832XEMDS) + printf("PCI 32bit bus on PMC2 &PMC3\n"); +#else + printf("PCI 32bit bus on PMC1 & PMC2 &PMC3\n"); +#endif +#endif + +#if defined(CONFIG_PQ_MDS_PIB_ATM) +#if defined(CONFIG_MPC8360EMDS) + val8 = 0; + i2c_write(0x20, 0x6, 1, &val8, 1); + i2c_write(0x20, 0x7, 1, &val8, 1); + + val8 = 0xdf; + i2c_write(0x20, 0x2, 1, &val8, 1); + val8 = 0xf7; + i2c_write(0x20, 0x3, 1, &val8, 1); + + eieio(); + + printf("QOC3 ATM card on PMC0\n"); +#elif defined(CONFIG_MPC832XEMDS) + val = 0; + i2c_write(0x26, 0x7, 1, &val, 1); + val = 0xf7; + i2c_write(0x26, 0x3, 1, &val, 1); + + val = 0; + i2c_write(0x21, 0x6, 1, &val, 1); + i2c_write(0x21, 0x7, 1, &val, 1); + + val = 0xdf; + i2c_write(0x21, 0x2, 1, &val, 1); + val = 0xef; + i2c_write(0x21, 0x3, 1, &val, 1); + + eieio(); + + printf("QOC3 ATM card on PMC1\n"); +#endif +#endif + /* Reset to original I2C bus */ + i2c_set_bus_num(orig_i2c_bus); + return 0; +} +#endif /* CONFIG_PQ_MDS_PIB */ diff --git a/board/freescale/common/pq-mds-pib.h b/board/freescale/common/pq-mds-pib.h new file mode 100644 index 0000000..67066fd --- /dev/null +++ b/board/freescale/common/pq-mds-pib.h @@ -0,0 +1,9 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + */ + +extern int pib_init(void); diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c new file mode 100644 index 0000000..7bc663b --- /dev/null +++ b/board/freescale/common/sys_eeprom.c @@ -0,0 +1,256 @@ +/* + * Copyright 2006 Freescale Semiconductor + * York Sun (yorksun@freescale.com) + * Haiying Wang (haiying.wang@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <linux/ctype.h> + +#ifdef CFG_ID_EEPROM +typedef struct { + unsigned char id[4]; /* 0x0000 - 0x0003 */ + unsigned char sn[12]; /* 0x0004 - 0x000F */ + unsigned char errata[5]; /* 0x0010 - 0x0014 */ + unsigned char date[7]; /* 0x0015 - 0x001a */ + unsigned char res_1[37]; /* 0x001b - 0x003f */ + unsigned char tab_size; /* 0x0040 */ + unsigned char tab_flag; /* 0x0041 */ + unsigned char mac[8][6]; /* 0x0042 - 0x0071 */ + unsigned char res_2[126]; /* 0x0072 - 0x00ef */ + unsigned int crc; /* 0x00f0 - 0x00f3 crc32 checksum */ +} EEPROM_data; + +static EEPROM_data mac_data; + +int mac_show(void) +{ + int i; + unsigned char ethaddr[8][18]; + + printf("ID %c%c%c%c\n", + mac_data.id[0], + mac_data.id[1], + mac_data.id[2], + mac_data.id[3]); + printf("Errata %c%c%c%c%c\n", + mac_data.errata[0], + mac_data.errata[1], + mac_data.errata[2], + mac_data.errata[3], + mac_data.errata[4]); + printf("Date %c%c%c%c%c%c%c\n", + mac_data.date[0], + mac_data.date[1], + mac_data.date[2], + mac_data.date[3], + mac_data.date[4], + mac_data.date[5], + mac_data.date[6]); + for (i = 0; i < 8; i++) { + sprintf((char *)ethaddr[i], + "%02x:%02x:%02x:%02x:%02x:%02x", + mac_data.mac[i][0], + mac_data.mac[i][1], + mac_data.mac[i][2], + mac_data.mac[i][3], + mac_data.mac[i][4], + mac_data.mac[i][5]); + printf("MAC %d %s\n", i, ethaddr[i]); + } + + setenv("ethaddr", (char *)ethaddr[0]); + setenv("eth1addr", (char *)ethaddr[1]); + setenv("eth2addr", (char *)ethaddr[2]); + setenv("eth3addr", (char *)ethaddr[3]); + + return 0; +} + +int mac_read(void) +{ + int ret, length; + unsigned int crc = 0; + unsigned char dev = ID_EEPROM_ADDR, *data; + + length = sizeof(EEPROM_data); + ret = i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length); + if (ret) { + printf("Read failed.\n"); + return -1; + } + + data = (unsigned char *)(&mac_data); + printf("Check CRC on reading ..."); + crc = crc32(crc, data, length - 4); + if (crc != mac_data.crc) { + printf("CRC checksum is invalid, in EEPROM CRC is %x, calculated CRC is %x\n", + mac_data.crc, crc); + return -1; + } else { + printf("CRC OK\n"); + mac_show(); + } + return 0; +} + +int mac_prog(void) +{ + int ret, i, length; + unsigned int crc = 0; + unsigned char dev = ID_EEPROM_ADDR, *ptr; + unsigned char *eeprom_data = (unsigned char *)(&mac_data); + + for (i = 0; i < sizeof(mac_data.res_1); i++) + mac_data.res_1[i] = 0; + for (i = 0; i < sizeof(mac_data.res_2); i++) + mac_data.res_2[i] = 0; + length = sizeof(EEPROM_data); + crc = crc32(crc, eeprom_data, length - 4); + mac_data.crc = crc; + for (i = 0, ptr = eeprom_data; i < length; i += 8, ptr += 8) { + ret = + i2c_write(dev, i, 1, ptr, + (length - i) < 8 ? (length - i) : 8); + udelay(5000); /* 5ms write cycle timing */ + if (ret) + break; + } + if (ret) { + printf("Programming failed.\n"); + return -1; + } else { + printf("Programming %d bytes. Reading back ...\n", length); + mac_read(); + } + return 0; +} + +int do_mac(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + int i; + char cmd = 's'; + unsigned long long mac_val; + + if (i2c_probe(ID_EEPROM_ADDR) != 0) + return -1; + + if (argc > 1) { + cmd = argv[1][0]; + switch (cmd) { + case 'r': /* display */ + mac_read(); + break; + case 's': /* save */ + mac_prog(); + break; + case 'i': /* id */ + for (i = 0; i < 4; i++) { + mac_data.id[i] = argv[2][i]; + } + break; + case 'n': /* serial number */ + for (i = 0; i < 12; i++) { + mac_data.sn[i] = argv[2][i]; + } + break; + case 'e': /* errata */ + for (i = 0; i < 5; i++) { + mac_data.errata[i] = argv[2][i]; + } + break; + case 'd': /* date */ + for (i = 0; i < 7; i++) { + mac_data.date[i] = argv[2][i]; + } + break; + case 'p': /* number of ports */ + mac_data.tab_size = + (unsigned char)simple_strtoul(argv[2], NULL, 16); + break; + case '0': /* mac 0 */ + case '1': /* mac 1 */ + case '2': /* mac 2 */ + case '3': /* mac 3 */ + case '4': /* mac 4 */ + case '5': /* mac 5 */ + case '6': /* mac 6 */ + case '7': /* mac 7 */ + mac_val = simple_strtoull(argv[2], NULL, 16); + for (i = 0; i < 6; i++) { + mac_data.mac[cmd - '0'][i] = + *((unsigned char *) + (((unsigned int)(&mac_val)) + i + 2)); + } + break; + case 'h': /* help */ + default: + printf("Usage:\n%s\n", cmdtp->usage); + break; + } + } else { + mac_show(); + } + return 0; +} + +int mac_read_from_eeprom(void) +{ + int length, i; + unsigned char dev = ID_EEPROM_ADDR; + unsigned char *data; + unsigned char ethaddr[4][18]; + unsigned char enetvar[32]; + unsigned int crc = 0; + + length = sizeof(EEPROM_data); + if (i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length)) { + printf("Read failed.\n"); + return -1; + } + + data = (unsigned char *)(&mac_data); + crc = crc32(crc, data, length - 4); + if (crc != mac_data.crc) { + return -1; + } else { + for (i = 0; i < 4; i++) { + if (memcmp(&mac_data.mac[i], "\0\0\0\0\0\0", 6)) { + sprintf((char *)ethaddr[i], + "%02x:%02x:%02x:%02x:%02x:%02x", + mac_data.mac[i][0], + mac_data.mac[i][1], + mac_data.mac[i][2], + mac_data.mac[i][3], + mac_data.mac[i][4], + mac_data.mac[i][5]); + sprintf((char *)enetvar, + i ? "eth%daddr" : "ethaddr", + i); + setenv((char *)enetvar, (char *)ethaddr[i]); + } + } + } + return 0; +} +#endif /* CFG_ID_EEPROM */ diff --git a/board/freescale/m5235evb/Makefile b/board/freescale/m5235evb/Makefile new file mode 100644 index 0000000..74c2528 --- /dev/null +++ b/board/freescale/m5235evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o mii.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5235evb/config.mk b/board/freescale/m5235evb/config.mk new file mode 100644 index 0000000..ada38dd --- /dev/null +++ b/board/freescale/m5235evb/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +/*TEXT_BASE = 0xFFC00000*/ +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
\ No newline at end of file diff --git a/board/freescale/m5235evb/m5235evb.c b/board/freescale/m5235evb/m5235evb.c new file mode 100644 index 0000000..585854c --- /dev/null +++ b/board/freescale/m5235evb/m5235evb.c @@ -0,0 +1,117 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/immap.h> + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale M5235 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); + u32 dramsize, i, dramclk; + + /* + * When booting from external Flash, the port-size is less than + * the port-size of SDRAM. In this case it is necessary to enable + * Data[15:0] on Port Address/Data. + */ + gpio->par_ad = + GPIO_PAR_AD_ADDR23 | GPIO_PAR_AD_ADDR22 | GPIO_PAR_AD_ADDR21 | + GPIO_PAR_AD_DATAL; + + /* Initialize PAR to enable SDRAM signals */ + gpio->par_sdram = + GPIO_PAR_SDRAM_SDWE | GPIO_PAR_SDRAM_SCAS | GPIO_PAR_SDRAM_SRAS | + GPIO_PAR_SDRAM_SCKE | GPIO_PAR_SDRAM_SDCS(3); + + dramsize = CFG_SDRAM_SIZE * 0x100000; + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + if (!(sdram->dacr0 & SDRAMC_DARCn_RE)) { + dramclk = gd->bus_clk / (CFG_HZ * CFG_HZ); + + /* Initialize DRAM Control Register: DCR */ + sdram->dcr = SDRAMC_DCR_RTIM_9CLKS | + SDRAMC_DCR_RTIM_6CLKS | SDRAMC_DCR_RC((15 * dramclk) >> 4); + + /* Initialize DACR0 */ + sdram->dacr0 = + SDRAMC_DARCn_BA(CFG_SDRAM_BASE) | SDRAMC_DARCn_CASL_C1 | + SDRAMC_DARCn_CBM_CMD20 | SDRAMC_DARCn_PS_32; + + /* Initialize DMR0 */ + sdram->dmr0 = ((dramsize - 1) & 0xFFFC0000) | SDRAMC_DMRn_V; + + /* Set IP (bit 3) in DACR */ + sdram->dacr0 |= SDRAMC_DARCn_IP; + + /* Wait 30ns to allow banks to precharge */ + for (i = 0; i < 5; i++) { + asm("nop"); + } + + /* Write to this block to initiate precharge */ + *(u32 *) (CFG_SDRAM_BASE) = 0xA5A59696; + + /* Set RE (bit 15) in DACR */ + sdram->dacr0 |= SDRAMC_DARCn_RE; + + /* Wait for at least 8 auto refresh cycles to occur */ + for (i = 0; i < 0x2000; i++) { + asm("nop"); + } + + /* Finish the configuration by issuing the MRS. */ + sdram->dacr0 |= SDRAMC_DARCn_IMRS; + + /* Write to the SDRAM Mode Register */ + *(u32 *) (CFG_SDRAM_BASE + 0x400) = 0xA5A59696; + } + + return dramsize; +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} diff --git a/board/freescale/m5235evb/mii.c b/board/freescale/m5235evb/mii.c new file mode 100644 index 0000000..1fd4d99 --- /dev/null +++ b/board/freescale/m5235evb/mii.c @@ -0,0 +1,307 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fec.h> +#include <asm/immap.h> + +#include <config.h> +#include <net.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->par_feci2c |= + (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO); + } else { + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK); + } + + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_MII) +#include <miiphy.h> + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ +#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" +#define STR_ID_KS8721BL "KS8721BL" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + strcpy(info->phy_name, + STR_ID_KS8721BL); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + printf(STR_ID_KS8721BL); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +void mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5235evb/u-boot.16 b/board/freescale/m5235evb/u-boot.16 new file mode 100644 index 0000000..8ffd326 --- /dev/null +++ b/board/freescale/m5235evb/u-boot.16 @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf523x/start.o (.text) + cpu/mcf523x/cpu_init.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m5235evb/u-boot.32 b/board/freescale/m5235evb/u-boot.32 new file mode 100644 index 0000000..9b72f66 --- /dev/null +++ b/board/freescale/m5235evb/u-boot.32 @@ -0,0 +1,153 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf523x/start.o (.text) + cpu/mcf523x/cpu.o (.text) + cpu/mcf523x/cpu_init.o (.text) + cpu/mcf523x/interrupts.o (.text) + cpu/mcf523x/speed.o (.text) + lib_m68k/libm68k.a (.text) + common/dlmalloc.o (.text) + common/cmd_bootm.o (.text) + common/cmd_flash.o (.text) + common/cmd_elf.o (.text) + common/cmd_mem.o (.text) + common/console.o (.text) + common/main.o (.text) + lib_generic/libgeneric.a (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m5235evb/u-boot.lds b/board/freescale/m5235evb/u-boot.lds new file mode 100644 index 0000000..8ffd326 --- /dev/null +++ b/board/freescale/m5235evb/u-boot.lds @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf523x/start.o (.text) + cpu/mcf523x/cpu_init.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m5249evb/Makefile b/board/freescale/m5249evb/Makefile new file mode 100644 index 0000000..424ab1c --- /dev/null +++ b/board/freescale/m5249evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5249evb/config.mk b/board/freescale/m5249evb/config.mk new file mode 100644 index 0000000..ccb2cf7 --- /dev/null +++ b/board/freescale/m5249evb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xffe00000 diff --git a/board/freescale/m5249evb/m5249evb.c b/board/freescale/m5249evb/m5249evb.c new file mode 100644 index 0000000..e8f621b --- /dev/null +++ b/board/freescale/m5249evb/m5249evb.c @@ -0,0 +1,113 @@ +/* + * (C) Copyright 2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <malloc.h> +#include <asm/immap.h> + + +/* Prototypes */ +int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +int checkboard (void) { + ulong val; + uchar val8; + + puts ("Board: "); + puts("Freescale M5249EVB"); + val8 = ((uchar)~((uchar)mbar2_readLong(MCFSIM_GPIO1_READ) >> 4)) & 0xf; + printf(" (Switch=%1X)\n", val8); + + /* + * Set LED on + */ + val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CFG_GPIO1_LED; + mbar2_writeLong(MCFSIM_GPIO1_OUT, val); /* Set LED on */ + + return 0; +}; + + +long int initdram (int board_type) { + unsigned long junk = 0xa5a59696; + + /* + * Note: + * RC = ([(RefreshTime/#rows) / (1/BusClk)] / 16) - 1 + */ + +#ifdef CFG_FAST_CLK + /* + * Busclk=70MHz, RefreshTime=64ms, #rows=4096 (4K) + * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=39 + */ + mbar_writeShort(MCFSIM_DCR, 0x8239); +#elif CFG_PLL_BYPASS + /* + * Busclk=5.6448MHz, RefreshTime=64ms, #rows=8192 (8K) + * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=02 + */ + mbar_writeShort(MCFSIM_DCR, 0x8202); +#else + /* + * Busclk=36MHz, RefreshTime=64ms, #rows=4096 (4K) + * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=22 (562 bus clock cycles) + */ + mbar_writeShort(MCFSIM_DCR, 0x8222); +#endif + + /* + * SDRAM starts at 0x0000_0000, CASL=10, CBM=010, PS=10 (16bit port), + * PM=1 (continuous page mode) + */ + + /* RE=0 (keep auto-refresh disabled while setting up registers) */ + mbar_writeLong(MCFSIM_DACR0, 0x00003324); + + /* BAM=007c (bits 22,21 are bank selects; 256kB blocks) */ + mbar_writeLong(MCFSIM_DMR0, 0x01fc0001); + + /** Precharge sequence **/ + mbar_writeLong(MCFSIM_DACR0, 0x0000332c); /* Set DACR0[IP] (bit 3) */ + *((volatile unsigned long *) 0x00) = junk; /* write to a memory location to init. precharge */ + udelay(0x10); /* Allow several Precharge cycles */ + + /** Refresh Sequence **/ + mbar_writeLong(MCFSIM_DACR0, 0x0000b324); /* Enable the refresh bit, DACR0[RE] (bit 15) */ + udelay(0x7d0); /* Allow gobs of refresh cycles */ + + /** Mode Register initialization **/ + mbar_writeLong(MCFSIM_DACR0, 0x0000b364); /* Enable DACR0[IMRS] (bit 6); RE remains enabled */ + *((volatile unsigned long *) 0x800) = junk; /* Access RAM to initialize the mode register */ + + return CFG_SDRAM_SIZE * 1024 * 1024; +}; + + +int testdram (void) { + /* TODO: XXX XXX XXX */ + printf ("DRAM test not implemented!\n"); + + return (0); +} diff --git a/board/freescale/m5249evb/u-boot.lds b/board/freescale/m5249evb/u-boot.lds new file mode 100644 index 0000000..a803b1c --- /dev/null +++ b/board/freescale/m5249evb/u-boot.lds @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf52x2/start.o (.text) + lib_m68k/traps.o (.text) + cpu/mcf52x2/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m5253evbe/Makefile b/board/freescale/m5253evbe/Makefile new file mode 100644 index 0000000..424ab1c --- /dev/null +++ b/board/freescale/m5253evbe/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5253evbe/config.mk b/board/freescale/m5253evbe/config.mk new file mode 100644 index 0000000..ccb2cf7 --- /dev/null +++ b/board/freescale/m5253evbe/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xffe00000 diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c new file mode 100644 index 0000000..43aa84d --- /dev/null +++ b/board/freescale/m5253evbe/m5253evbe.c @@ -0,0 +1,132 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Hayden Fraser (Hayden.Fraser@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/immap.h> + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale MCF5253 EVBE\n"); + return 0; +}; + +long int initdram(int board_type) +{ + int i; + + /* + * Check to see if the SDRAM has already been initialized + * by a run control tool + */ + if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) { + u32 RC, dramsize; + + RC = (CFG_CLK / 1000000) >> 1; + RC = (RC * 15) >> 4; + + /* Initialize DRAM Control Register: DCR */ + mbar_writeShort(MCFSIM_DCR, (0x8400 | RC)); + + mbar_writeLong(MCFSIM_DACR0, 0x00003224); + + /* Initialize DMR0 */ + dramsize = ((CFG_SDRAM_SIZE << 20) - 1) & 0xFFFC0000; + mbar_writeLong(MCFSIM_DMR0, dramsize | 1); + + mbar_writeLong(MCFSIM_DACR0, 0x0000322c); + + /* Write to this block to initiate precharge */ + *(u32 *) (CFG_SDRAM_BASE) = 0xa5a5a5a5; + + /* Set RE bit in DACR */ + mbar_writeLong(MCFSIM_DACR0, + mbar_readLong(MCFSIM_DACR0) | 0x8000); + + /* Wait for at least 8 auto refresh cycles to occur */ + udelay(500); + + /* Finish the configuration by issuing the MRS */ + mbar_writeLong(MCFSIM_DACR0, + mbar_readLong(MCFSIM_DACR0) | 0x0040); + + *(u32 *) (CFG_SDRAM_BASE + 0x800) = 0xa5a5a5a5; + } + + return CFG_SDRAM_SIZE * 1024 * 1024; +} + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} + +#ifdef CONFIG_CMD_IDE +#include <ata.h> +int ide_preinit(void) +{ + return (0); +} + +void ide_set_reset(int idereset) +{ + volatile atac_t *ata = (atac_t *) CFG_ATA_BASE_ADDR; + long period; + /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */ + int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */ + {50, 125, 45, 20, 35, 5, 15, 0, 35}, /* PIO 1 */ + {30, 100, 30, 15, 20, 5, 10, 0, 35}, /* PIO 2 */ + {30, 80, 30, 10, 20, 5, 10, 0, 35}, /* PIO 3 */ + {25, 70, 20, 10, 20, 5, 10, 0, 35} /* PIO 4 */ + }; + + if (idereset) { + ata->cr = 0; /* control reset */ + udelay(100); + } else { + mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND); + +#define CALC_TIMING(t) (t + period - 1) / period + period = 1000000000 / (CFG_CLK / 2); /* period in ns */ + + /*ata->ton = CALC_TIMING (180); */ + ata->t1 = CALC_TIMING(piotms[2][0]); + ata->t2w = CALC_TIMING(piotms[2][1]); + ata->t2r = CALC_TIMING(piotms[2][1]); + ata->ta = CALC_TIMING(piotms[2][8]); + ata->trd = CALC_TIMING(piotms[2][7]); + ata->t4 = CALC_TIMING(piotms[2][3]); + ata->t9 = CALC_TIMING(piotms[2][6]); + + ata->cr = 0x40; /* IORDY enable */ + udelay(2000); + ata->cr |= 0x01; /* IORDY enable */ + } +} +#endif /* CONFIG_CMD_IDE */ diff --git a/board/freescale/m5253evbe/u-boot.lds b/board/freescale/m5253evbe/u-boot.lds new file mode 100644 index 0000000..e2fd070 --- /dev/null +++ b/board/freescale/m5253evbe/u-boot.lds @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf52x2/start.o (.text) + lib_m68k/traps.o (.text) + cpu/mcf52x2/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m5329evb/Makefile b/board/freescale/m5329evb/Makefile new file mode 100644 index 0000000..ab0f11e --- /dev/null +++ b/board/freescale/m5329evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o mii.o nand.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5329evb/config.mk b/board/freescale/m5329evb/config.mk new file mode 100644 index 0000000..ce014ed --- /dev/null +++ b/board/freescale/m5329evb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0 diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c new file mode 100644 index 0000000..242eb1a --- /dev/null +++ b/board/freescale/m5329evb/m5329evb.c @@ -0,0 +1,88 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/immap.h> + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale FireEngine 5329 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + u32 dramsize, i; + + dramsize = CFG_SDRAM_SIZE * 0x100000; + + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + sdram->cs0 = (CFG_SDRAM_BASE | i); + sdram->cfg1 = CFG_SDRAM_CFG1; + sdram->cfg2 = CFG_SDRAM_CFG2; + + /* Issue PALL */ + sdram->ctrl = CFG_SDRAM_CTRL | 2; + + /* Issue LEMR */ + sdram->mode = CFG_SDRAM_EMOD; + sdram->mode = (CFG_SDRAM_MODE | 0x04000000); + + udelay(500); + + /* Issue PALL */ + sdram->ctrl = (CFG_SDRAM_CTRL | 2); + + /* Perform two refresh cycles */ + sdram->ctrl = CFG_SDRAM_CTRL | 4; + sdram->ctrl = CFG_SDRAM_CTRL | 4; + + sdram->mode = CFG_SDRAM_MODE; + + sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + + udelay(100); + + return dramsize; +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} diff --git a/board/freescale/m5329evb/mii.c b/board/freescale/m5329evb/mii.c new file mode 100644 index 0000000..8f6abf3 --- /dev/null +++ b/board/freescale/m5329evb/mii.c @@ -0,0 +1,306 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fec.h> +#include <asm/immap.h> + +#include <config.h> +#include <net.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC; + gpio->par_feci2c |= + GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO; + } else { + gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC); + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO); + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include <miiphy.h> + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + strcpy(info->phy_name, + STR_ID_DP83848VV); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + printf(STR_ID_DP83848VV); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +void mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c new file mode 100644 index 0000000..fefb42e --- /dev/null +++ b/board/freescale/m5329evb/nand.c @@ -0,0 +1,114 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NAND) +#include <nand.h> +#include <linux/mtd/mtd.h> + +#define SET_CLE 0x10 +#define CLR_CLE ~SET_CLE +#define SET_ALE 0x08 +#define CLR_ALE ~SET_ALE + +static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd) +{ + struct nand_chip *this = mtdinfo->priv; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + u32 nand_baseaddr = (u32) this->IO_ADDR_W; + + switch (cmd) { + case NAND_CTL_SETNCE: + case NAND_CTL_CLRNCE: + break; + case NAND_CTL_SETCLE: + nand_baseaddr |= SET_CLE; + break; + case NAND_CTL_CLRCLE: + nand_baseaddr &= CLR_CLE; + break; + case NAND_CTL_SETALE: + nand_baseaddr |= SET_ALE; + break; + case NAND_CTL_CLRALE: + nand_baseaddr |= CLR_ALE; + break; + case NAND_CTL_SETWP: + fbcs->csmr2 |= CSMR_WP; + break; + case NAND_CTL_CLRWP: + fbcs->csmr2 &= ~CSMR_WP; + break; + } + this->IO_ADDR_W = (void __iomem *)(nand_baseaddr); +} + +static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte) +{ + struct nand_chip *this = mtdinfo->priv; + *((volatile u8 *)(this->IO_ADDR_W)) = byte; +} + +static u8 nand_read_byte(struct mtd_info *mtdinfo) +{ + struct nand_chip *this = mtdinfo->priv; + return (u8) (*((volatile u8 *)this->IO_ADDR_R)); +} + +static int nand_dev_ready(struct mtd_info *mtdinfo) +{ + return 1; +} + +int board_nand_init(struct nand_chip *nand) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + *((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004; + + /* set up pin configuration */ + gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3; + gpio->pddr_timer |= 0x08; + gpio->ppd_timer |= 0x08; + gpio->pclrr_timer = 0; + gpio->podr_timer = 0; + + nand->chip_delay = 50; + nand->eccmode = NAND_ECC_SOFT; + nand->hwcontrol = nand_hwcontrol; + nand->read_byte = nand_read_byte; + nand->write_byte = nand_write_byte; + nand->dev_ready = nand_dev_ready; + + return 0; +} +#endif diff --git a/board/freescale/m5329evb/u-boot.lds b/board/freescale/m5329evb/u-boot.lds new file mode 100644 index 0000000..9b994a0 --- /dev/null +++ b/board/freescale/m5329evb/u-boot.lds @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf532x/start.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile new file mode 100644 index 0000000..ca9a772 --- /dev/null +++ b/board/freescale/m54455evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o flash.o mii.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################
\ No newline at end of file diff --git a/board/freescale/m54455evb/config.mk b/board/freescale/m54455evb/config.mk new file mode 100644 index 0000000..ce014ed --- /dev/null +++ b/board/freescale/m54455evb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0 diff --git a/board/freescale/m54455evb/flash.c b/board/freescale/m54455evb/flash.c new file mode 100644 index 0000000..de2cca8 --- /dev/null +++ b/board/freescale/m54455evb/flash.c @@ -0,0 +1,974 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <asm/immap.h> + +#ifndef CFG_FLASH_CFI +typedef unsigned char FLASH_PORT_WIDTH; +typedef volatile unsigned char FLASH_PORT_WIDTHV; + +#define FPW FLASH_PORT_WIDTH +#define FPWV FLASH_PORT_WIDTHV + +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT +#define CFG_FLASH_NONCFI_WIDTH FLASH_CFI_8BIT + +/* Intel-compatible flash commands */ +#define INTEL_PROGRAM 0x00100010 +#define INTEL_ERASE 0x00200020 +#define INTEL_WRSETUP 0x00400040 +#define INTEL_CLEAR 0x00500050 +#define INTEL_LOCKBIT 0x00600060 +#define INTEL_PROTECT 0x00010001 +#define INTEL_STATUS 0x00700070 +#define INTEL_READID 0x00900090 +#define INTEL_CFIQRY 0x00980098 +#define INTEL_SUSERASE 0x00B000B0 +#define INTEL_PROTPROG 0x00C000C0 +#define INTEL_CONFIRM 0x00D000D0 +#define INTEL_WRBLK 0x00e800e8 +#define INTEL_RESET 0x00FF00FF + +/* Intel-compatible flash status bits */ +#define INTEL_FINISHED 0x00800080 +#define INTEL_OK 0x00800080 +#define INTEL_ERASESUS 0x00600060 +#define INTEL_WSM_SUS (INTEL_FINISHED | INTEL_ERASESUS) + +/* 28F160C3B CFI Data offset - This could vary */ +#define INTEL_CFI_MFG 0x00 /* Manufacturer ID */ +#define INTEL_CFI_PART 0x01 /* Product ID */ +#define INTEL_CFI_LOCK 0x02 /* */ +#define INTEL_CFI_TWPRG 0x1F /* Typical Single Word Program Timeout 2^n us */ +#define INTEL_CFI_MBUFW 0x20 /* Typical Max Buffer Write Timeout 2^n us */ +#define INTEL_CFI_TERB 0x21 /* Typical Block Erase Timeout 2^n ms */ +#define INTEL_CFI_MWPRG 0x23 /* Maximum Word program timeout 2^n us */ +#define INTEL_CFI_MERB 0x25 /* Maximum Block Erase Timeout 2^n s */ +#define INTEL_CFI_SIZE 0x27 /* Device size 2^n bytes */ +#define INTEL_CFI_CAP 0x28 +#define INTEL_CFI_WRBUF 0x2A +#define INTEL_CFI_BANK 0x2C /* Number of Bank */ +#define INTEL_CFI_BLK1A 0x2D /* Number of Blocks */ +#define INTEL_CFI_BLK1B 0x2E /* Number of Blocks */ +#define INTEL_CFI_SZ1A 0x2F /* Block Region Size */ +#define INTEL_CFI_SZ1B 0x30 +#define INTEL_CFI_BLK2A 0x31 +#define INTEL_CFI_BLK2B 0x32 +#define INTEL_CFI_SZ2A 0x33 +#define INTEL_CFI_SZ2B 0x34 + +#define FLASH_CYCLE1 0x0555 +#define FLASH_CYCLE2 0x0aaa + +#define WR_BLOCK 0x20 + +/* not in the flash.h yet */ +#define FLASH_28F64P30T 0x00B9 /* Intel 28F64P30T ( 64M) */ +#define FLASH_28F64P30B 0x00BA /* Intel 28F64P30B ( 64M) */ +#define FLASH_28F128P30T 0x00BB /* Intel 28F128P30T ( 128M = 8M x 16 ) */ +#define FLASH_28F128P30B 0x00BC /* Intel 28F128P30B ( 128M = 8M x 16 ) */ +#define FLASH_28F256P30T 0x00BD /* Intel 28F256P30T ( 256M = 16M x 16 ) */ +#define FLASH_28F256P30B 0x00BE /* Intel 28F256P30B ( 256M = 16M x 16 ) */ + +#define SYNC __asm__("nop") + +/*----------------------------------------------------------------------- + * Functions + */ + +ulong flash_get_size(FPWV * addr, flash_info_t * info); +int flash_get_offsets(ulong base, flash_info_t * info); +int flash_cmd_rd(volatile u16 * addr, int index); +int write_data(flash_info_t * info, ulong dest, FPW data); +int write_data_block(flash_info_t * info, ulong src, ulong dest); +int write_word_atm(flash_info_t * info, volatile u8 * dest, u16 data); +void inline spin_wheel(void); +void flash_sync_real_protect(flash_info_t * info); +uchar intel_sector_protected(flash_info_t * info, ushort sector); + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +ulong flash_init(void) +{ + int i; + ulong size = 0; + ulong fbase = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + memset(&flash_info[i], 0, sizeof(flash_info_t)); + + switch (i) { + case 0: + fbase = (ulong) CFG_FLASH0_BASE; + break; + case 1: + fbase = (ulong) CFG_FLASH1_BASE; + break; + } + + flash_get_size((FPWV *) fbase, &flash_info[i]); + flash_get_offsets((ulong) fbase, &flash_info[i]); + fbase += flash_info[i].size; + size += flash_info[i].size; + + /* get the h/w and s/w protection status in sync */ + flash_sync_real_protect(&flash_info[i]); + } + + /* Protect monitor and environment sectors */ + flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); + + return size; +} + +int flash_get_offsets(ulong base, flash_info_t * info) +{ + int i, j, k; + int sectors, bs, banks; + ulong start; + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_ATM) { + int sect[] = CFG_ATMEL_SECT; + int sectsz[] = CFG_ATMEL_SECTSZ; + + info->start[0] = base; + for (k = 0, i = 0; i < CFG_ATMEL_REGION; i++) { + for (j = 0; j < sect[i]; j++, k++) { + info->start[k + 1] = info->start[k] + sectsz[i]; + info->protect[k] = 0; + } + } + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { + volatile u16 *addr16 = (volatile u16 *)base; + + *addr16 = (FPW) INTEL_RESET; /* restore read mode */ + *addr16 = (FPW) INTEL_READID; + + banks = addr16[INTEL_CFI_BANK] & 0xff; + + sectors = 0; + info->start[0] = base; + + for (k = 0, i = 0; i < banks; i++) { + /* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec. + * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count + * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count + */ + bs = ((((addr16[INTEL_CFI_SZ1B + (i * 4)] & 0xff) << 8) + | (addr16[INTEL_CFI_SZ1A + (i * 4)] & 0xff)) * + 0x100); + sectors = + (addr16[INTEL_CFI_BLK1A + (i * 4)] & 0xff) + 1; + + for (j = 0; j < sectors; j++, k++) { + info->start[k + 1] = info->start[k] + bs; + } + } + + *addr16 = (FPW) INTEL_RESET; /* restore read mode */ + } + + return ERR_OK; +} + +void flash_print_info(flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + printf("INTEL "); + break; + case FLASH_MAN_ATM: + printf("ATMEL "); + break; + default: + printf("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_AT040: + printf("AT49BV040A\n"); + break; + case FLASH_28F128J3A: + printf("Intel 28F128J3A\n"); + break; + default: + printf("Unknown Chip Type\n"); + return; + } + + if (info->size > 0x100000) { + int remainder; + + printf(" Size: %ld", info->size >> 20); + + remainder = (info->size % 0x100000); + if (remainder) { + remainder >>= 10; + remainder = (int)((float) + (((float)remainder / (float)1024) * + 10000)); + printf(".%d ", remainder); + } + + printf("MB in %d Sectors\n", info->sector_count); + } else + printf(" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s", + info->start[i], info->protect[i] ? " (RO)" : " "); + } + printf("\n"); +} + +/* + * The following code cannot be run from FLASH! + */ +ulong flash_get_size(FPWV * addr, flash_info_t * info) +{ + volatile u16 *addr16 = (volatile u16 *)addr; + int intel = 0, banks = 0; + u16 value; + int i; + + addr[FLASH_CYCLE1] = (FPWV) 0x00AA00AA; /* for Atmel, Intel ignores this */ + addr[FLASH_CYCLE2] = (FPWV) 0x00550055; /* for Atmel, Intel ignores this */ + addr[FLASH_CYCLE1] = (FPWV) 0x00900090; /* selects Intel or Atmel */ + + switch (addr[0] & 0xff) { + case (u8) ATM_MANUFACT: + info->flash_id = FLASH_MAN_ATM; + value = addr[1]; + break; + case (u8) INTEL_MANUFACT: + /* Terminate Atmel ID read */ + addr[0] = (FPWV) 0x00F000F0; + /* Write auto select command: read Manufacturer ID */ + /* Write auto select command sequence and test FLASH answer */ + *addr16 = (FPW) INTEL_RESET; /* restore read mode */ + *addr16 = (FPW) INTEL_READID; + + info->flash_id = FLASH_MAN_INTEL; + value = (addr16[INTEL_CFI_MFG] << 8); + value |= addr16[INTEL_CFI_PART] & 0xff; + intel = 1; + break; + default: + printf("Unknown Flash\n"); + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + + *addr = (FPW) 0x00F000F0; + *addr = (FPW) INTEL_RESET; /* restore read mode */ + return (0); /* no or unknown flash */ + } + + switch (value) { + case (u8) ATM_ID_LV040: + info->flash_id += FLASH_AT040; + break; + case (u16) INTEL_ID_28F128J3: + info->flash_id += FLASH_28F128J3A; + break; + case (u16) INTEL_ID_28F64P30T: + info->flash_id += FLASH_28F64P30T; + break; + case (u16) INTEL_ID_28F64P30B: + info->flash_id += FLASH_28F64P30B; + break; + case (u16) INTEL_ID_28F128P30T: + info->flash_id += FLASH_28F128P30T; + break; + case (u16) INTEL_ID_28F128P30B: + info->flash_id += FLASH_28F128P30B; + break; + case (u16) INTEL_ID_28F256P30T: + info->flash_id += FLASH_28F256P30T; + break; + case (u16) INTEL_ID_28F256P30B: + info->flash_id += FLASH_28F256P30B; + break; + default: + info->flash_id = FLASH_UNKNOWN; + break; + } + + if (intel) { + /* Intel spec. under CFI section */ + u32 sz; + int sectors, bs; + + banks = addr16[INTEL_CFI_BANK] & 0xff; + + sectors = sz = 0; + for (i = 0; i < banks; i++) { + /* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec. + * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count + * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count + */ + bs = ((((addr16[INTEL_CFI_SZ1B + (i * 4)] & 0xff) << 8) + | (addr16[INTEL_CFI_SZ1A + (i * 4)] & 0xff)) * + 0x100); + sectors += + (addr16[INTEL_CFI_BLK1A + (i * 4)] & 0xff) + 1; + sz += (bs * sectors); + } + + info->sector_count = sectors; + info->size = sz; + *addr = (FPW) INTEL_RESET; /* restore read mode */ + } else { + int sect[] = CFG_ATMEL_SECT; + int sectsz[] = CFG_ATMEL_SECTSZ; + + info->sector_count = 0; + info->size = 0; + for (i = 0; i < CFG_ATMEL_REGION; i++) { + info->sector_count += sect[i]; + info->size += sect[i] * sectsz[i]; + } + + /* reset ID mode */ + addr[0] = (FPWV) 0x00F000F0; + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + return (info->size); +} + +int flash_cmd_rd(volatile u16 * addr, int index) +{ + return (int)addr[index]; +} + +/* + * This function gets the u-boot flash sector protection status + * (flash_info_t.protect[]) in sync with the sector protection + * status stored in hardware. + */ +void flash_sync_real_protect(flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + case FLASH_28F160C3T: + case FLASH_28F320C3B: + case FLASH_28F320C3T: + case FLASH_28F640C3B: + case FLASH_28F640C3T: + for (i = 0; i < info->sector_count; ++i) { + info->protect[i] = intel_sector_protected(info, i); + } + break; + default: + /* no h/w protect support */ + break; + } +} + +/* + * checks if "sector" in bank "info" is protected. Should work on intel + * strata flash chips 28FxxxJ3x in 8-bit mode. + * Returns 1 if sector is protected (or timed-out while trying to read + * protection status), 0 if it is not. + */ +uchar intel_sector_protected(flash_info_t * info, ushort sector) +{ + FPWV *addr; + FPWV *lock_conf_addr; + ulong start; + unsigned char ret; + + /* + * first, wait for the WSM to be finished. The rationale for + * waiting for the WSM to become idle for at most + * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy + * because of: (1) erase, (2) program or (3) lock bit + * configuration. So we just wait for the longest timeout of + * the (1)-(3), i.e. the erase timeout. + */ + + /* wait at least 35ns (W12) before issuing Read Status Register */ + /*udelay(1); */ + addr = (FPWV *) info->start[sector]; + *addr = (FPW) INTEL_STATUS; + + start = get_timer(0); + while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { + if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) { + *addr = (FPW) INTEL_RESET; /* restore read mode */ + printf("WSM busy too long, can't get prot status\n"); + return 1; + } + } + + /* issue the Read Identifier Codes command */ + *addr = (FPW) INTEL_READID; + + /* Intel example code uses offset of 4 for 8-bit flash */ + lock_conf_addr = (FPWV *) info->start[sector]; + ret = (lock_conf_addr[INTEL_CFI_LOCK] & (FPW) INTEL_PROTECT) ? 1 : 0; + + /* put flash back in read mode */ + *addr = (FPW) INTEL_RESET; + + return ret; +} + +int flash_erase(flash_info_t * info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong type, start, last; + int rcode = 0, intel = 0; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) + printf("- missing\n"); + else + printf("- no sectors to erase\n"); + return 1; + } + + type = (info->flash_id & FLASH_VENDMASK); + + if (type != (FLASH_MAN_INTEL & FLASH_VENDMASK)) { + if (type != (FLASH_MAN_ATM & FLASH_VENDMASK)) { + type = (info->flash_id & FLASH_VENDMASK); + printf + ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + } + + if (type == FLASH_MAN_INTEL) + intel = 1; + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) + printf("- Warning: %d protected sectors will not be erased!\n", + prot); + else + printf("\n"); + + start = get_timer(0); + last = start; + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + + FPWV *addr = (FPWV *) (info->start[sect]); + int min = 0; + + printf("."); + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + if (intel) { + *addr = (FPW) INTEL_READID; + min = addr[INTEL_CFI_TERB] & 0xff; + min = 1 << min; /* ms */ + min = (min / info->sector_count) * 1000; + + /* start erase block */ + *addr = (FPW) INTEL_CLEAR; /* clear status register */ + *addr = (FPW) INTEL_ERASE; /* erase setup */ + *addr = (FPW) INTEL_CONFIRM; /* erase confirm */ + + while ((*addr & (FPW) INTEL_FINISHED) != + (FPW) INTEL_FINISHED) { + + if (get_timer(start) > + CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + *addr = (FPW) INTEL_SUSERASE; /* suspend erase */ + *addr = (FPW) INTEL_RESET; /* reset to read mode */ + + rcode = 1; + break; + } + } + + *addr = (FPW) INTEL_RESET; /* resest to read mode */ + } else { + FPWV *base; /* first address in bank */ + FPWV *atmeladdr; + + flag = disable_interrupts(); + + atmeladdr = (FPWV *) addr; /* concatenate to 8 bit */ + base = (FPWV *) (CFG_ATMEL_BASE); /* First sector */ + + base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ + base[FLASH_CYCLE1] = (u8) 0x00800080; /* erase mode */ + base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ + *atmeladdr = (u8) 0x00300030; /* erase sector */ + + if (flag) + enable_interrupts(); + + while ((*atmeladdr & (u8) 0x00800080) != + (u8) 0x00800080) { + if (get_timer(start) > + CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */ + + rcode = 1; + break; + } + } + + *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */ + } /* Atmel or Intel */ + } + } + printf(" done\n"); + + return rcode; +} + +int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + if (info->flash_id == FLASH_UNKNOWN) + return 4; + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_ATM: + { + u16 data = 0; + int bytes; /* number of bytes to program in current word */ + int left; /* number of bytes left to program */ + int i, res; + + for (left = cnt, res = 0; + left > 0 && res == 0; + addr += sizeof(data), left -= + sizeof(data) - bytes) { + + bytes = addr & (sizeof(data) - 1); + addr &= ~(sizeof(data) - 1); + + /* combine source and destination data so can program + * an entire word of 16 or 32 bits + */ + for (i = 0; i < sizeof(data); i++) { + data <<= 8; + if (i < bytes || i - bytes >= left) + data += *((uchar *) addr + i); + else + data += *src++; + } + + data = (data >> 8) | (data << 8); + res = write_word_atm(info, (FPWV *) addr, data); + } + return res; + } /* case FLASH_MAN_ATM */ + + case FLASH_MAN_INTEL: + { + ulong cp, wp; + u16 data; + int count, i, l, rc, port_width; + + /* get lower word aligned address */ + wp = addr; + port_width = sizeof(FPW); + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + for (; i < port_width && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + + for (; cnt == 0 && i < port_width; ++i, ++cp) + data = (data << 8) | (*(uchar *) cp); + + if ((rc = write_data(info, wp, data)) != 0) + return (rc); + + wp += port_width; + } + + if (cnt > WR_BLOCK) { + /* + * handle word aligned part + */ + count = 0; + while (cnt >= WR_BLOCK) { + + if ((rc = + write_data_block(info, + (ulong) src, + wp)) != 0) + return (rc); + + wp += WR_BLOCK; + src += WR_BLOCK; + cnt -= WR_BLOCK; + + if (count++ > 0x800) { + spin_wheel(); + count = 0; + } + } + } + + /* handle word aligned part */ + if (cnt < WR_BLOCK) { + /* + * handle word aligned part + */ + count = 0; + while (cnt >= port_width) { + data = 0; + for (i = 0; i < port_width; ++i) + data = (data << 8) | *src++; + + if ((rc = + write_data(info, + (ulong) ((FPWV *) wp), + (FPW) (data))) != 0) + return (rc); + + wp += port_width; + cnt -= port_width; + if (count++ > 0x800) { + spin_wheel(); + count = 0; + } + } + } + + if (cnt == 0) + return ERR_OK; + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < port_width && cnt > 0; + ++i, ++cp) { + data = (data << 8) | (*src++); + --cnt; + } + for (; i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + return write_data(info, (ulong) ((FPWV *) wp), + (FPW) data); + + } /* case FLASH_MAN_INTEL */ + + } /* switch */ + + return ERR_OK; +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_data_block(flash_info_t * info, ulong src, ulong dest) +{ + FPWV *srcaddr = (FPWV *) src; + FPWV *dstaddr = (FPWV *) dest; + ulong start; + int flag, i; + + /* Check if Flash is (sufficiently) erased */ + for (i = 0; i < WR_BLOCK; i++) + if ((*dstaddr++ & 0xff) != 0xff) { + printf("not erased at %08lx (%lx)\n", + (ulong) dstaddr, *dstaddr); + return (2); + } + + dstaddr = (FPWV *) dest; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + *dstaddr = (FPW) INTEL_WRBLK; /* write block setup */ + + if (flag) + enable_interrupts(); + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + /* wait while polling the status register */ + while ((*dstaddr & (FPW) INTEL_FINISHED) != (FPW) INTEL_OK) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *dstaddr = (FPW) INTEL_RESET; /* restore read mode */ + return (1); + } + } + + *dstaddr = (FPW) WR_BLOCK - 1; /* write 32 to buffer */ + for (i = 0; i < WR_BLOCK; i++) + *dstaddr++ = *srcaddr++; + + dstaddr -= 1; + *dstaddr = (FPW) INTEL_CONFIRM; /* write 32 to buffer */ + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + /* wait while polling the status register */ + while ((*dstaddr & (FPW) INTEL_FINISHED) != (FPW) INTEL_OK) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *dstaddr = (FPW) INTEL_RESET; /* restore read mode */ + return (1); + } + } + + *dstaddr = (FPW) INTEL_RESET; /* restore read mode */ + + return (0); +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_data(flash_info_t * info, ulong dest, FPW data) +{ + FPWV *addr = (FPWV *) dest; + ulong start; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*addr & data) != data) { + printf("not erased at %08lx (%lx)\n", (ulong) addr, + (ulong) * addr); + return (2); + } + + /* Disable interrupts which might cause a timeout here */ + flag = (int)disable_interrupts(); + + *addr = (FPW) INTEL_CLEAR; + *addr = (FPW) INTEL_RESET; + + *addr = (FPW) INTEL_WRSETUP; /* write setup */ + *addr = data; + + if (flag) + enable_interrupts(); + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + /* wait while polling the status register */ + while ((*addr & (FPW) INTEL_OK) != (FPW) INTEL_OK) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *addr = (FPW) INTEL_SUSERASE; /* suspend mode */ + *addr = (FPW) INTEL_CLEAR; /* clear status */ + *addr = (FPW) INTEL_RESET; /* reset */ + return (1); + } + } + + *addr = (FPW) INTEL_CLEAR; /* clear status */ + *addr = (FPW) INTEL_RESET; /* restore read mode */ + + return (0); +} + +/*----------------------------------------------------------------------- + * Write a word to Flash for ATMEL FLASH + * A word is 16 bits, whichever the bus width of the flash bank + * (not an individual chip) is. + * + * returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_word_atm(flash_info_t * info, volatile u8 * dest, u16 data) +{ + ulong start; + int flag, i; + int res = 0; /* result, assume success */ + FPWV *base; /* first address in flash bank */ + + /* Check if Flash is (sufficiently) erased */ + if ((*((volatile u16 *)dest) & data) != data) { + return (2); + } + + base = (FPWV *) (CFG_ATMEL_BASE); + + for (i = 0; i < sizeof(u16); i++) { + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ + base[FLASH_CYCLE1] = (u8) 0x00A000A0; /* selects program mode */ + + *dest = data; /* start programming the data */ + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + start = get_timer(0); + + /* data polling for D7 */ + while (res == 0 + && (*dest & (u8) 0x00800080) != + (data & (u8) 0x00800080)) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *dest = (u8) 0x00F000F0; /* reset bank */ + res = 1; + } + } + + *dest++ = (u8) 0x00F000F0; /* reset bank */ + data >>= 8; + } + + return (res); +} + +void inline spin_wheel(void) +{ + static int p = 0; + static char w[] = "\\/-"; + + printf("\010%c", w[p]); + (++p == 3) ? (p = 0) : 0; +} + +#ifdef CFG_FLASH_PROTECTION +/*----------------------------------------------------------------------- + */ +int flash_real_protect(flash_info_t * info, long sector, int prot) +{ + int rcode = 0; /* assume success */ + FPWV *addr; /* address of sector */ + FPW value; + + addr = (FPWV *) (info->start[sector]); + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + case FLASH_28F160C3T: + case FLASH_28F320C3B: + case FLASH_28F320C3T: + case FLASH_28F640C3B: + case FLASH_28F640C3T: + *addr = (FPW) INTEL_RESET; /* make sure in read mode */ + *addr = (FPW) INTEL_LOCKBIT; /* lock command setup */ + + if (prot) + *addr = (FPW) INTEL_PROTECT; /* lock sector */ + else + *addr = (FPW) INTEL_CONFIRM; /* unlock sector */ + + /* now see if it really is locked/unlocked as requested */ + *addr = (FPW) INTEL_READID; + + /* read sector protection at sector address, (A7 .. A0) = 0x02. + * D0 = 1 for each device if protected. + * If at least one device is protected the sector is marked + * protected, but return failure. Mixed protected and + * unprotected devices within a sector should never happen. + */ + value = addr[2] & (FPW) INTEL_PROTECT; + if (value == 0) + info->protect[sector] = 0; + else if (value == (FPW) INTEL_PROTECT) + info->protect[sector] = 1; + else { + /* error, mixed protected and unprotected */ + rcode = 1; + info->protect[sector] = 1; + } + if (info->protect[sector] != prot) + rcode = 1; /* failed to protect/unprotect as requested */ + + /* reload all protection bits from hardware for now */ + flash_sync_real_protect(info); + break; + + default: + /* no hardware protect that we support */ + info->protect[sector] = prot; + break; + } + + return rcode; +} +#endif +#endif diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c new file mode 100644 index 0000000..6a02782 --- /dev/null +++ b/board/freescale/m54455evb/m54455evb.c @@ -0,0 +1,164 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <pci.h> +#include <asm/immap.h> + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale M54455 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM); + volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); + u32 dramsize, i; + + dramsize = CFG_SDRAM_SIZE * 0x100000 >> 1; + + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + gpio->mscr_sdram = 0xAA; + + sdram->sdcs0 = (CFG_SDRAM_BASE | i); + sdram->sdcs1 = (CFG_SDRAM_BASE1 | i); + + sdram->sdcfg1 = CFG_SDRAM_CFG1; + sdram->sdcfg2 = CFG_SDRAM_CFG2; + + /* Issue PALL */ + sdram->sdcr = CFG_SDRAM_CTRL | 2; + + /* Issue LEMR */ + sdram->sdmr = CFG_SDRAM_EMOD | 0x408; + sdram->sdmr = CFG_SDRAM_MODE | 0x300; + + udelay(500); + + /* Issue PALL */ + sdram->sdcr = CFG_SDRAM_CTRL | 2; + + /* Perform two refresh cycles */ + sdram->sdcr = CFG_SDRAM_CTRL | 4; + sdram->sdcr = CFG_SDRAM_CTRL | 4; + + sdram->sdmr = CFG_SDRAM_MODE | 0x200; + + sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + + udelay(100); + + return (dramsize << 1); +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} + +#if defined(CONFIG_CMD_IDE) +#include <ata.h> + +int ide_preinit(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + gpio->par_fec |= (gpio->par_fec & GPIO_PAR_FEC_FEC1_MASK) | 0x10; + gpio->par_feci2c |= + (gpio->par_feci2c & 0xF0FF) | (GPIO_PAR_FECI2C_MDC1_ATA_DIOR | + GPIO_PAR_FECI2C_MDIO1_ATA_DIOW); + gpio->par_ata |= + (GPIO_PAR_ATA_BUFEN | GPIO_PAR_ATA_CS1 | GPIO_PAR_ATA_CS0 | + GPIO_PAR_ATA_DA2 | GPIO_PAR_ATA_DA1 | GPIO_PAR_ATA_DA0 + | GPIO_PAR_ATA_RESET_RESET | GPIO_PAR_ATA_DMARQ_DMARQ | + GPIO_PAR_ATA_IORDY_IORDY); + gpio->par_pci |= + (GPIO_PAR_PCI_GNT3_ATA_DMACK | GPIO_PAR_PCI_REQ3_ATA_INTRQ); + + return (0); +} + +void ide_set_reset(int idereset) +{ + volatile atac_t *ata = (atac_t *) MMAP_ATA; + long period; + /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */ + int piotms[5][9] = { + {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */ + {50, 125, 45, 20, 35, 5, 15, 0, 35}, /* PIO 1 */ + {30, 100, 30, 15, 20, 5, 10, 0, 35}, /* PIO 2 */ + {30, 80, 30, 10, 20, 5, 10, 0, 35}, /* PIO 3 */ + {25, 70, 20, 10, 20, 5, 10, 0, 35} + }; /* PIO 4 */ + + if (idereset) { + ata->cr = 0; /* control reset */ + udelay(10000); + } else { +#define CALC_TIMING(t) (t + period - 1) / period + period = 1000000000 / gd->bus_clk; /* period in ns */ + + /*ata->ton = CALC_TIMING (180); */ + ata->t1 = CALC_TIMING(piotms[2][0]); + ata->t2w = CALC_TIMING(piotms[2][1]); + ata->t2r = CALC_TIMING(piotms[2][1]); + ata->ta = CALC_TIMING(piotms[2][8]); + ata->trd = CALC_TIMING(piotms[2][7]); + ata->t4 = CALC_TIMING(piotms[2][3]); + ata->t9 = CALC_TIMING(piotms[2][6]); + + ata->cr = 0x40; /* IORDY enable */ + udelay(200000); + ata->cr |= 0x01; /* IORDY enable */ + } +} +#endif + +#if defined(CONFIG_PCI) +/* + * Initialize PCI devices, report devices found. + */ +static struct pci_controller hose; +extern void pci_mcf5445x_init(struct pci_controller *hose); + +void pci_init_board(void) +{ + pci_mcf5445x_init(&hose); +} +#endif /* CONFIG_PCI */ diff --git a/board/freescale/m54455evb/mii.c b/board/freescale/m54455evb/mii.c new file mode 100644 index 0000000..7a59aa0 --- /dev/null +++ b/board/freescale/m54455evb/mii.c @@ -0,0 +1,320 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fec.h> +#include <asm/immap.h> + +#include <config.h> +#include <net.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + struct fec_info_s *info = (struct fec_info_s *)dev->priv; + + if (setclear) { + gpio->par_feci2c |= + (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); + + if (info->iobase == CFG_FEC0_IOBASE) + gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO; + else + gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA; + } else { + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); + + if (info->iobase == CFG_FEC0_IOBASE) + gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK; + else + gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK; + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include <miiphy.h> + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + struct eth_device *dev; + int i, miispd; + u16 rst = 0; + + dev = eth_get_dev(); + + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET); + for (i = 0; i < FEC_RESET_DELAY; ++i) { + udelay(500); + miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst); + if ((rst & PHY_BMCR_RESET) == 0) + break; + } + if (i == FEC_RESET_DELAY) + printf("Mii reset timeout %d\n", i); +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + strcpy(info->phy_name, + STR_ID_DP83848VV); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + printf(STR_ID_DP83848VV); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +void mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m54455evb/u-boot.lds new file mode 100644 index 0000000..bda68e4 --- /dev/null +++ b/board/freescale/m54455evb/u-boot.lds @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf5445x/start.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/mpc8313erdb/Makefile b/board/freescale/mpc8313erdb/Makefile new file mode 100644 index 0000000..a987e510 --- /dev/null +++ b/board/freescale/mpc8313erdb/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o sdram.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc8313erdb/config.mk b/board/freescale/mpc8313erdb/config.mk new file mode 100644 index 0000000..f768264 --- /dev/null +++ b/board/freescale/mpc8313erdb/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c new file mode 100644 index 0000000..861c143 --- /dev/null +++ b/board/freescale/mpc8313erdb/mpc8313erdb.c @@ -0,0 +1,121 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 + * + * Author: Scott Wood <scottwood@freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif +#include <pci.h> +#include <mpc83xx.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ +#ifndef CFG_8313ERDB_BROKEN_PMC + volatile immap_t *im = (immap_t *)CFG_IMMR; + + if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) + gd->flags |= GD_FLG_SILENT; +#endif + + return 0; +} + +int checkboard(void) +{ + puts("Board: Freescale MPC8313ERDB\n"); + return 0; +} + +static struct pci_region pci_regions[] = { + { + bus_start: CFG_PCI1_MEM_BASE, + phys_start: CFG_PCI1_MEM_PHYS, + size: CFG_PCI1_MEM_SIZE, + flags: PCI_REGION_MEM | PCI_REGION_PREFETCH + }, + { + bus_start: CFG_PCI1_MMIO_BASE, + phys_start: CFG_PCI1_MMIO_PHYS, + size: CFG_PCI1_MMIO_SIZE, + flags: PCI_REGION_MEM + }, + { + bus_start: CFG_PCI1_IO_BASE, + phys_start: CFG_PCI1_IO_PHYS, + size: CFG_PCI1_IO_SIZE, + flags: PCI_REGION_IO + } +}; + +void pci_init_board(void) +{ + volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; + volatile law83xx_t *pci_law = immr->sysconf.pcilaw; + struct pci_region *reg[] = { pci_regions }; + int warmboot; + + /* Enable all 3 PCI_CLK_OUTPUTs. */ + clk->occr |= 0xe0000000; + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; + + warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM; +#ifndef CFG_8313ERDB_BROKEN_PMC + warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF; +#endif + + mpc83xx_pci_init(1, reg, warmboot); +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c new file mode 100644 index 0000000..16ec4bb --- /dev/null +++ b/board/freescale/mpc8313erdb/sdram.c @@ -0,0 +1,131 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 + * + * Authors: Nick.Spence@freescale.com + * Wilson.Lo@freescale.com + * scottwood@freescale.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc83xx.h> +#include <spd_sdram.h> + +#include <asm/bitops.h> +#include <asm/io.h> + +#include <asm/processor.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifndef CFG_8313ERDB_BROKEN_PMC +static void resume_from_sleep(void) +{ + u32 magic = *(u32 *)0; + + typedef void (*func_t)(void); + func_t resume = *(func_t *)4; + + if (magic == 0xf5153ae5) + resume(); + + gd->flags &= ~GD_FLG_SILENT; + puts("\nResume from sleep failed: bad magic word\n"); +} +#endif + +/* Fixed sdram init -- doesn't use serial presence detect. + * + * This is useful for faster booting in configs where the RAM is unlikely + * to be changed, or for things like NAND booting where space is tight. + */ +static long fixed_sdram(void) +{ + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + u32 msize = CFG_DDR_SIZE * 1024 * 1024; + u32 msize_log2 = __ilog2(msize); + + im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12; + im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); + im->sysconf.ddrcdr = CFG_DDRCDR_VALUE; + + /* + * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], + * or the DDR2 controller may fail to initialize correctly. + */ + udelay(50000); + + im->ddr.csbnds[0].csbnds = (msize - 1) >> 24; + im->ddr.cs_config[0] = CFG_DDR_CONFIG; + + /* Currently we use only one CS, so disable the other bank. */ + im->ddr.cs_config[1] = 0; + + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + +#ifndef CFG_8313ERDB_BROKEN_PMC + if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) + im->ddr.sdram_cfg = CFG_SDRAM_CFG | SDRAM_CFG_BI; + else +#endif + im->ddr.sdram_cfg = CFG_SDRAM_CFG; + + im->ddr.sdram_cfg2 = CFG_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE_2; + + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + sync(); + + /* enable DDR controller */ + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + return msize; +} + +long int initdram(int board_type) +{ + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + volatile lbus83xx_t *lbc = &im->lbus; + u32 msize; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + msize = fixed_sdram(); + + /* Local Bus setup lbcr and mrtpr */ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + sync(); + +#ifndef CFG_8313ERDB_BROKEN_PMC + if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) + resume_from_sleep(); +#endif + + /* return total bus SDRAM size(bytes) -- DDR */ + return msize; +} diff --git a/board/freescale/mpc8323erdb/Makefile b/board/freescale/mpc8323erdb/Makefile new file mode 100644 index 0000000..acc9544 --- /dev/null +++ b/board/freescale/mpc8323erdb/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc8323erdb/config.mk b/board/freescale/mpc8323erdb/config.mk new file mode 100644 index 0000000..fe0d37d --- /dev/null +++ b/board/freescale/mpc8323erdb/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC8323ERDB +# + +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c new file mode 100644 index 0000000..e738613 --- /dev/null +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -0,0 +1,202 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * Michael Barkowski <michael.barkowski@freescale.com> + * Based on mpc832xmds file by Dave Liu <daveliu@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <common.h> +#include <ioports.h> +#include <mpc83xx.h> +#include <i2c.h> +#include <spd.h> +#include <miiphy.h> +#include <command.h> +#include <libfdt.h> +#if defined(CONFIG_PCI) +#include <pci.h> +#endif +#if defined(CONFIG_SPD_EEPROM) +#include <spd_sdram.h> +#else +#include <asm/mmu.h> +#endif + +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* UCC3 */ + {1, 0, 1, 0, 1}, /* TxD0 */ + {1, 1, 1, 0, 1}, /* TxD1 */ + {1, 2, 1, 0, 1}, /* TxD2 */ + {1, 3, 1, 0, 1}, /* TxD3 */ + {1, 9, 1, 0, 1}, /* TxER */ + {1, 12, 1, 0, 1}, /* TxEN */ + {3, 24, 2, 0, 1}, /* TxCLK->CLK10 */ + + {1, 4, 2, 0, 1}, /* RxD0 */ + {1, 5, 2, 0, 1}, /* RxD1 */ + {1, 6, 2, 0, 1}, /* RxD2 */ + {1, 7, 2, 0, 1}, /* RxD3 */ + {1, 8, 2, 0, 1}, /* RxER */ + {1, 10, 2, 0, 1}, /* RxDV */ + {0, 13, 2, 0, 1}, /* RxCLK->CLK9 */ + {1, 11, 2, 0, 1}, /* COL */ + {1, 13, 2, 0, 1}, /* CRS */ + + /* UCC2 */ + {0, 18, 1, 0, 1}, /* TxD0 */ + {0, 19, 1, 0, 1}, /* TxD1 */ + {0, 20, 1, 0, 1}, /* TxD2 */ + {0, 21, 1, 0, 1}, /* TxD3 */ + {0, 27, 1, 0, 1}, /* TxER */ + {0, 30, 1, 0, 1}, /* TxEN */ + {3, 23, 2, 0, 1}, /* TxCLK->CLK3 */ + + {0, 22, 2, 0, 1}, /* RxD0 */ + {0, 23, 2, 0, 1}, /* RxD1 */ + {0, 24, 2, 0, 1}, /* RxD2 */ + {0, 25, 2, 0, 1}, /* RxD3 */ + {0, 26, 1, 0, 1}, /* RxER */ + {0, 28, 2, 0, 1}, /* Rx_DV */ + {3, 21, 2, 0, 1}, /* RxCLK->CLK16 */ + {0, 29, 2, 0, 1}, /* COL */ + {0, 31, 2, 0, 1}, /* CRS */ + + {3, 4, 3, 0, 2}, /* MDIO */ + {3, 5, 1, 0, 2}, /* MDC */ + + {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ +}; + +int board_early_init_f(void) +{ + return 0; +} + +int fixed_sdram(void); + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; + + msize = fixed_sdram(); + + /* return total bus SDRAM size(bytes) -- DDR */ + return (msize * 1024 * 1024); +} + +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CFG_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { + if (ddr_size & 1) { + return -1; + } + } + im->sysconf.ddrlaw[0].ar = + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; + im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE2; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + __asm__ __volatile__ ("sync"); + udelay(200); + + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + __asm__ __volatile__ ("sync"); + return msize; +} + +int checkboard(void) +{ + puts("Board: Freescale MPC8323ERDB\n"); + return 0; +} + +static struct pci_region pci_regions[] = { + { + bus_start: CFG_PCI1_MEM_BASE, + phys_start: CFG_PCI1_MEM_PHYS, + size: CFG_PCI1_MEM_SIZE, + flags: PCI_REGION_MEM | PCI_REGION_PREFETCH + }, + { + bus_start: CFG_PCI1_MMIO_BASE, + phys_start: CFG_PCI1_MMIO_PHYS, + size: CFG_PCI1_MMIO_SIZE, + flags: PCI_REGION_MEM + }, + { + bus_start: CFG_PCI1_IO_BASE, + phys_start: CFG_PCI1_IO_PHYS, + size: CFG_PCI1_IO_SIZE, + flags: PCI_REGION_IO + } +}; + +void pci_init_board(void) +{ + volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; + volatile law83xx_t *pci_law = immr->sysconf.pcilaw; + struct pci_region *reg[] = { pci_regions }; + + /* Enable all 3 PCI_CLK_OUTPUTs. */ + clk->occr |= 0xe0000000; + + /* Configure PCI Local Access Windows */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; + + mpc83xx_pci_init(1, reg, 0); +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc832xemds/Makefile b/board/freescale/mpc832xemds/Makefile new file mode 100644 index 0000000..5ec7a87 --- /dev/null +++ b/board/freescale/mpc832xemds/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc832xemds/config.mk b/board/freescale/mpc832xemds/config.mk new file mode 100644 index 0000000..6c3eca7 --- /dev/null +++ b/board/freescale/mpc832xemds/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC832XEMDS +# + +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc832xemds/mpc832xemds.c b/board/freescale/mpc832xemds/mpc832xemds.c new file mode 100644 index 0000000..6ba25d4 --- /dev/null +++ b/board/freescale/mpc832xemds/mpc832xemds.c @@ -0,0 +1,187 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu <daveliu@freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <common.h> +#include <ioports.h> +#include <mpc83xx.h> +#include <i2c.h> +#include <spd.h> +#include <miiphy.h> +#include <command.h> +#if defined(CONFIG_PCI) +#include <pci.h> +#endif +#if defined(CONFIG_SPD_EEPROM) +#include <spd_sdram.h> +#else +#include <asm/mmu.h> +#endif +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../common/pq-mds-pib.h" +#endif + +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* ETH3 */ + {1, 0, 1, 0, 1}, /* TxD0 */ + {1, 1, 1, 0, 1}, /* TxD1 */ + {1, 2, 1, 0, 1}, /* TxD2 */ + {1, 3, 1, 0, 1}, /* TxD3 */ + {1, 9, 1, 0, 1}, /* TxER */ + {1, 12, 1, 0, 1}, /* TxEN */ + {3, 24, 2, 0, 1}, /* TxCLK->CLK10 */ + + {1, 4, 2, 0, 1}, /* RxD0 */ + {1, 5, 2, 0, 1}, /* RxD1 */ + {1, 6, 2, 0, 1}, /* RxD2 */ + {1, 7, 2, 0, 1}, /* RxD3 */ + {1, 8, 2, 0, 1}, /* RxER */ + {1, 10, 2, 0, 1}, /* RxDV */ + {0, 13, 2, 0, 1}, /* RxCLK->CLK9 */ + {1, 11, 2, 0, 1}, /* COL */ + {1, 13, 2, 0, 1}, /* CRS */ + + /* ETH4 */ + {1, 18, 1, 0, 1}, /* TxD0 */ + {1, 19, 1, 0, 1}, /* TxD1 */ + {1, 20, 1, 0, 1}, /* TxD2 */ + {1, 21, 1, 0, 1}, /* TxD3 */ + {1, 27, 1, 0, 1}, /* TxER */ + {1, 30, 1, 0, 1}, /* TxEN */ + {3, 6, 2, 0, 1}, /* TxCLK->CLK8 */ + + {1, 22, 2, 0, 1}, /* RxD0 */ + {1, 23, 2, 0, 1}, /* RxD1 */ + {1, 24, 2, 0, 1}, /* RxD2 */ + {1, 25, 2, 0, 1}, /* RxD3 */ + {1, 26, 1, 0, 1}, /* RxER */ + {1, 28, 2, 0, 1}, /* Rx_DV */ + {3, 31, 2, 0, 1}, /* RxCLK->CLK7 */ + {1, 29, 2, 0, 1}, /* COL */ + {1, 31, 2, 0, 1}, /* CRS */ + + {3, 4, 3, 0, 2}, /* MDIO */ + {3, 5, 1, 0, 2}, /* MDC */ + + {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ +}; + +int board_early_init_f(void) +{ + volatile u8 *bcsr = (volatile u8 *)CFG_BCSR; + + /* Enable flash write */ + bcsr[9] &= ~0x08; + + return 0; +} + +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + +int fixed_sdram(void); + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; + + msize = fixed_sdram(); + + /* return total bus SDRAM size(bytes) -- DDR */ + return (msize * 1024 * 1024); +} + +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CFG_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { + if (ddr_size & 1) { + return -1; + } + } + im->sysconf.ddrlaw[0].ar = + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); +#if (CFG_DDR_SIZE != 128) +#warning Currenly any ddr size other than 128 is not supported +#endif + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; + im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE2; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + __asm__ __volatile__ ("sync"); + udelay(200); + + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + __asm__ __volatile__ ("sync"); + return msize; +} + +int checkboard(void) +{ + puts("Board: Freescale MPC832XEMDS\n"); + return 0; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc832xemds/pci.c b/board/freescale/mpc832xemds/pci.c new file mode 100644 index 0000000..6bc35c7 --- /dev/null +++ b/board/freescale/mpc832xemds/pci.c @@ -0,0 +1,298 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/* + * PCI Configuration space access support for MPC83xx PCI Bridge + */ +#include <asm/mmu.h> +#include <asm/io.h> +#include <common.h> +#include <pci.h> +#include <i2c.h> +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif + +#include <asm/fsl_i2c.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_PCI) +#define PCI_FUNCTION_CONFIG 0x44 +#define PCI_FUNCTION_CFG_LOCK 0x20 + +/* + * Initialize PCI Devices, report devices found + */ +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxemds_config_table[] = { + { + PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + pci_cfgfunc_config_device, + {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} + }, + {} +} +#endif +static struct pci_controller hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxemds_config_table, +#endif + }, +}; + +/********************************************************************** + * pci_init_board() + *********************************************************************/ +void pci_init_board(void) +#ifdef CONFIG_PCISLAVE +{ + u16 reg16; + volatile immap_t *immr; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + immr = (immap_t *) CFG_IMMR; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar0 = 0x0; + pci_ctrl[0].pibar0 = 0x0; + pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | PIWAR_IWS_4K; + + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 &= ~PIWAR_EN; + + pci_ctrl[0].pitar2 = 0x0; + pci_ctrl[0].pibar2 = 0x0; + pci_ctrl[0].piebar2 = 0x0; + pci_ctrl[0].piwar2 &= ~PIWAR_EN; + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + pci_setup_indirect(&hose[0], + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + reg16 = 0xff; + + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_STATUS, 0xffff); + pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), + PCI_LATENCY_TIMER, 0x80); + + /* + * Unlock configuration lock in PCI function configuration register. + */ + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, ®16); + reg16 &= ~(PCI_FUNCTION_CFG_LOCK); + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, reg16); + + printf("Enabled PCI 32bit Agent Mode\n"); +} +#else +{ + volatile immap_t *immr; + volatile clk83xx_t *clk; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + u16 reg16; + u32 val32; + u32 dev; + + immr = (immap_t *) CFG_IMMR; + clk = (clk83xx_t *) & immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + val32 = clk->occr; + udelay(2000); +#if defined(PCI_66M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#elif defined(PCI_33M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | + OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; + printf("PCI clock is 33MHz\n"); +#else + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#endif + udelay(2000); + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; + + pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = + POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI mmio - non-prefetch mem space */ + pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI IO space */ + pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; + pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | + PIWAR_IWS_2G; + + /* + * Release PCI RST Output signal + */ + udelay(2000); + pci_ctrl[0].gcr = 1; + udelay(2000); + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose[0].regions + 0, + CFG_PCI_MEM_BASE, + CFG_PCI_MEM_PHYS, + CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose[0].regions + 1, + CFG_PCI_MMIO_BASE, + CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose[0].regions + 2, + CFG_PCI_IO_BASE, + CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose[0].regions + 3, + CFG_PCI_SLV_MEM_LOCAL, + CFG_PCI_SLV_MEM_BUS, + CFG_PCI_SLV_MEM_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose[0].region_count = 4; + + pci_setup_indirect(&hose[0], + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + + pci_register_hose(hose); + + /* + * Write command register + */ + reg16 = 0xff; + dev = PCI_BDF(0, 0, 0); + pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +} +#endif /* CONFIG_PCISLAVE */ + +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(hose[0].first_busno); + tmp[1] = cpu_to_be32(hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +} +#elif defined(CONFIG_OF_FLAT_TREE) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = hose[0].first_busno; + p[1] = hose[0].last_busno; + } +} +#endif /* CONFIG_OF_FLAT_TREE */ +#endif /* CONFIG_PCI */ diff --git a/board/freescale/mpc8349emds/Makefile b/board/freescale/mpc8349emds/Makefile new file mode 100644 index 0000000..5ec7a87 --- /dev/null +++ b/board/freescale/mpc8349emds/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc8349emds/config.mk b/board/freescale/mpc8349emds/config.mk new file mode 100644 index 0000000..edf64d1 --- /dev/null +++ b/board/freescale/mpc8349emds/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC8349EMDS +# + +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c new file mode 100644 index 0000000..39c0916 --- /dev/null +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -0,0 +1,274 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <ioports.h> +#include <mpc83xx.h> +#include <asm/mpc8349_pci.h> +#include <i2c.h> +#include <spd.h> +#include <miiphy.h> +#if defined(CONFIG_SPD_EEPROM) +#include <spd_sdram.h> +#endif +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif + +int fixed_sdram(void); +void sdram_init(void); + +#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX) +void ddr_enable_ecc(unsigned int dram_size); +#endif + +int board_early_init_f (void) +{ + volatile u8* bcsr = (volatile u8*)CFG_BCSR; + + /* Enable flash write */ + bcsr[1] &= ~0x01; + +#ifdef CFG_USE_MPC834XSYS_USB_PHY + /* Use USB PHY on SYS board */ + bcsr[5] |= 0x02; +#endif + + return 0; +} + +#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1) + +long int initdram (int board_type) +{ + volatile immap_t *im = (immap_t *)CFG_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; +#if defined(CONFIG_SPD_EEPROM) + msize = spd_sdram(); +#else + msize = fixed_sdram(); +#endif + /* + * Initialize SDRAM if it is on local bus. + */ + sdram_init(); + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + /* + * Initialize and enable DDR ECC. + */ + ddr_enable_ecc(msize * 1024 * 1024); +#endif + + /* return total bus SDRAM size(bytes) -- DDR */ + return (msize * 1024 * 1024); +} + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *)CFG_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CFG_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); + ddr_size = ddr_size>>1, ddr_size_log2++) { + if (ddr_size & 1) { + return -1; + } + } + im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff); + im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); + +#if (CFG_DDR_SIZE != 256) +#warning Currenly any ddr size other than 256 is not supported +#endif +#ifdef CONFIG_DDR_II + im->ddr.csbnds[2].csbnds = CFG_DDR_CS2_BNDS; + im->ddr.cs_config[2] = CFG_DDR_CS2_CONFIG; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE2; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; +#else + im->ddr.csbnds[2].csbnds = 0x0000000f; + im->ddr.cs_config[2] = CFG_DDR_CONFIG; + + /* currently we use only one CS, so disable the other banks */ + im->ddr.cs_config[0] = 0; + im->ddr.cs_config[1] = 0; + im->ddr.cs_config[3] = 0; + + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + + im->ddr.sdram_cfg = + SDRAM_CFG_SREN +#if defined(CONFIG_DDR_2T_TIMING) + | SDRAM_CFG_2T_EN +#endif + | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT; +#if defined (CONFIG_DDR_32BIT) + /* for 32-bit mode burst length is 8 */ + im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); +#endif + im->ddr.sdram_mode = CFG_DDR_MODE; + + im->ddr.sdram_interval = CFG_DDR_INTERVAL; +#endif + udelay(200); + + /* enable DDR controller */ + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + return msize; +} +#endif/*!CFG_SPD_EEPROM*/ + + +int checkboard (void) +{ + puts("Board: Freescale MPC8349EMDS\n"); + return 0; +} + +/* + * if MPC8349EMDS is soldered with SDRAM + */ +#if defined(CFG_BR2_PRELIM) \ + && defined(CFG_OR2_PRELIM) \ + && defined(CFG_LBLAWBAR2_PRELIM) \ + && defined(CFG_LBLAWAR2_PRELIM) +/* + * Initialize SDRAM memory on the Local Bus. + */ + +void sdram_init(void) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile lbus83xx_t *lbc= &immap->lbus; + uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; + + /* + * Setup SDRAM Base and Option Registers, already done in cpu_init.c + */ + + /* setup mtrpt, lsrt and lbcr for LB bus */ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CFG_LBC_LSRT; + asm("sync"); + + /* + * Configure the SDRAM controller Machine Mode Register. + */ + lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ + + lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */ + asm("sync"); + /*1 times*/ + *sdram_addr = 0xff; + udelay(100); + /*2 times*/ + *sdram_addr = 0xff; + udelay(100); + /*3 times*/ + *sdram_addr = 0xff; + udelay(100); + /*4 times*/ + *sdram_addr = 0xff; + udelay(100); + /*5 times*/ + *sdram_addr = 0xff; + udelay(100); + /*6 times*/ + *sdram_addr = 0xff; + udelay(100); + /*7 times*/ + *sdram_addr = 0xff; + udelay(100); + /*8 times*/ + *sdram_addr = 0xff; + udelay(100); + + /* 0x58636733; mode register write operation */ + lbc->lsdmr = CFG_LBC_LSDMR_4; + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); +} +#else +void sdram_init(void) +{ +} +#endif + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc8349emds/pci.c b/board/freescale/mpc8349emds/pci.c new file mode 100644 index 0000000..ae94a2f --- /dev/null +++ b/board/freescale/mpc8349emds/pci.c @@ -0,0 +1,446 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <asm/mmu.h> +#include <common.h> +#include <asm/global_data.h> +#include <pci.h> +#include <asm/mpc8349_pci.h> +#include <i2c.h> +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif + + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_PCI + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc8349emds_config_table[] = { + {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_IDSEL_NUMBER, PCI_ANY_ID, + pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + } + }, + {} +}; +#endif + +static struct pci_controller pci_hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349emds_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349emds_config_table, +#endif + } +}; + +/************************************************************************** + * + * pib_init() -- initialize the PCA9555PW IO expander on the PIB board + * + */ +void +pib_init(void) +{ + u8 val8, orig_i2c_bus; + /* + * Assign PIB PMC slot to desired PCI bus + */ + /* Switch temporarily to I2C bus #2 */ + orig_i2c_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); + + val8 = 0; + i2c_write(0x23, 0x6, 1, &val8, 1); + i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x23, 0x2, 1, &val8, 1); + i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + i2c_write(0x26, 0x7, 1, &val8, 1); +#if defined(PCI_64BIT) + val8 = 0xf4; /* PMC2:PCI1/64-bit */ +#elif defined(PCI_ALL_PCI1) + val8 = 0xf3; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */ +#elif defined(PCI_ONE_PCI1) + val8 = 0xf9; /* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */ +#else + val8 = 0xf5; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */ +#endif + i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x26, 0x3, 1, &val8, 1); + val8 = 0; + i2c_write(0x27, 0x6, 1, &val8, 1); + i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + i2c_write(0x27, 0x3, 1, &val8, 1); + asm("eieio"); + +#if defined(PCI_64BIT) + printf("PCI1: 64-bit on PMC2\n"); +#elif defined(PCI_ALL_PCI1) + printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n"); +#elif defined(PCI_ONE_PCI1) + printf("PCI1: 32-bit on PMC1\n"); + printf("PCI2: 32-bit on PMC2, PMC3\n"); +#else + printf("PCI1: 32-bit on PMC1, PMC2\n"); + printf("PCI2: 32-bit on PMC3\n"); +#endif + /* Reset to original I2C bus */ + i2c_set_bus_num(orig_i2c_bus); +} + +/************************************************************************** + * pci_init_board() + * + * NOTICE: PCI2 is not currently supported + * + */ +void +pci_init_board(void) +{ + volatile immap_t * immr; + volatile clk83xx_t * clk; + volatile law83xx_t * pci_law; + volatile pot83xx_t * pci_pot; + volatile pcictrl83xx_t * pci_ctrl; + volatile pciconf83xx_t * pci_conf; + u16 reg16; + u32 reg32; + u32 dev; + struct pci_controller * hose; + + immr = (immap_t *)CFG_IMMR; + clk = (clk83xx_t *)&immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + + hose = &pci_hose[0]; + + pib_init(); + + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + + reg32 = clk->occr; + udelay(2000); + clk->occr = 0xff000000; + udelay(2000); + + /* + * Release PCI RST Output signal + */ + pci_ctrl[0].gcr = 0; + udelay(2000); + pci_ctrl[0].gcr = 1; + +#ifdef CONFIG_MPC83XX_PCI2 + pci_ctrl[1].gcr = 0; + udelay(2000); + pci_ctrl[1].gcr = 1; +#endif + + /* We need to wait at least a 1sec based on PCI specs */ + { + int i; + + for (i = 0; i < 1000; ++i) + udelay (1000); + } + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI1 mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI1 IO space */ + pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* PCI1 mmio - non-prefetch mem space */ + pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM|PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MMIO_BASE, + CFG_PCI1_MMIO_PHYS, + CFG_PCI1_MMIO_SIZE, + PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMR+0x8300), + (CFG_IMMR+0x8304)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); + +#ifdef CONFIG_MPC83XX_PCI2 + hose = &pci_hose[1]; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI2 mem space - prefetch */ + pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI2 IO space */ + pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* PCI2 mmio - non-prefetch mem space */ + pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[1].pitar1 = 0x0; + pci_ctrl[1].pibar1 = 0x0; + pci_ctrl[1].piebar1 = 0x0; + pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = pci_hose[0].last_busno + 1; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI2_MEM_BASE, + CFG_PCI2_MEM_PHYS, + CFG_PCI2_MEM_SIZE, + PCI_REGION_MEM|PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI2_MMIO_BASE, + CFG_PCI2_MMIO_PHYS, + CFG_PCI2_MMIO_SIZE, + PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI2_IO_BASE, + CFG_PCI2_IO_PHYS, + CFG_PCI2_IO_SIZE, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMR+0x8380), + (CFG_IMMR+0x8384)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +#endif + +} + +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[0].first_busno); + tmp[1] = cpu_to_be32(pci_hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#ifdef CONFIG_MPC83XX_PCI2 + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8600"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[1].first_busno); + tmp[1] = cpu_to_be32(pci_hose[1].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#endif +} +#elif defined(CONFIG_OF_FLAT_TREE) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[0].first_busno; + p[1] = pci_hose[0].last_busno; + } + +#ifdef CONFIG_MPC83XX_PCI2 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[1].first_busno; + p[1] = pci_hose[1].last_busno; + } +#endif +} +#endif /* CONFIG_OF_FLAT_TREE */ +#endif /* CONFIG_PCI */ diff --git a/board/freescale/mpc8349itx/Makefile b/board/freescale/mpc8349itx/Makefile new file mode 100644 index 0000000..31bcdb8 --- /dev/null +++ b/board/freescale/mpc8349itx/Makefile @@ -0,0 +1,48 @@ +# +# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc8349itx/config.mk b/board/freescale/mpc8349itx/config.mk new file mode 100644 index 0000000..79f1765 --- /dev/null +++ b/board/freescale/mpc8349itx/config.mk @@ -0,0 +1,31 @@ +# +# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC8349E-mITX and MPC8349E-mITX-GP +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE +TEXT_BASE = 0xFEF00000 +endif diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c new file mode 100644 index 0000000..c82f784 --- /dev/null +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -0,0 +1,407 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ioports.h> +#include <mpc83xx.h> +#include <i2c.h> +#include <spd.h> +#include <miiphy.h> + +#ifdef CONFIG_PCI +#include <asm/mpc8349_pci.h> +#include <pci.h> +#endif + +#ifdef CONFIG_SPD_EEPROM +#include <spd_sdram.h> +#else +#include <asm/mmu.h> +#endif +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif + +#ifndef CONFIG_SPD_EEPROM +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 ddr_size; /* The size of RAM, in bytes */ + u32 ddr_size_log2 = 0; + + for (ddr_size = CFG_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) { + if (ddr_size & 1) { + return -1; + } + ddr_size_log2++; + } + + im->sysconf.ddrlaw[0].ar = + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); + im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff; + + /* Only one CS0 for DDR */ + im->ddr.csbnds[0].csbnds = 0x0000000f; + im->ddr.cs_config[0] = CFG_DDR_CONFIG; + + debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds); + debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]); + + debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar); + debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar); + + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ + im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1; + im->ddr.sdram_mode = + (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); + im->ddr.sdram_interval = + (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 << + SDRAM_INTERVAL_BSTOPRE_SHIFT); + im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL; + + udelay(200); + + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1); + debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2); + debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode); + debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval); + debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg); + + return CFG_DDR_SIZE; +} +#endif + +#ifdef CONFIG_PCI +/* + * Initialize PCI Devices, report devices found + */ +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxmitx_config_table[] = { + { + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + 0x0f, + PCI_ANY_ID, + pci_cfgfunc_config_device, + { + PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} + }, + {} +} +#endif + +volatile static struct pci_controller hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxmitx_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxmitx_config_table, +#endif + } +}; +#endif /* CONFIG_PCI */ + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; +#ifdef CONFIG_DDR_ECC + volatile ddr83xx_t *ddr = &im->ddr; +#endif + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; +#ifdef CONFIG_SPD_EEPROM + msize = spd_sdram(); +#else + msize = fixed_sdram(); +#endif + +#ifdef CONFIG_DDR_ECC + if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) + /* Unlike every other board, on the 83xx spd_sdram() returns + megabytes instead of just bytes. That's why we need to + multiple by 1MB when calling ddr_enable_ecc(). */ + ddr_enable_ecc(msize * 1048576); +#endif + + /* return total bus RAM size(bytes) */ + return msize * 1024 * 1024; +} + +int checkboard(void) +{ +#ifdef CONFIG_MPC8349ITX + puts("Board: Freescale MPC8349E-mITX\n"); +#else + puts("Board: Freescale MPC8349E-mITX-GP\n"); +#endif + + return 0; +} + +/* + * Implement a work-around for a hardware problem with compact + * flash. + * + * Program the UPM if compact flash is enabled. + */ +int misc_init_f(void) +{ +#ifdef CONFIG_VSC7385 + volatile u32 *vsc7385_cpuctrl; + + /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up + default of VSC7385 L1_IRQ and L2_IRQ requests are active high. That + means it is 0 when the IRQ is not active. This makes the wire-AND + logic always assert IRQ7 to CPU even if there is no request from the + switch. Since the compact flash and the switch share the same IRQ, + the Linux kernel will think that the compact flash is requesting irq + and get stuck when it tries to clear the IRQ. Thus we need to set + the L2_IRQ0 and L2_IRQ1 to active low. + + The following code sets the L1_IRQ and L2_IRQ polarity to active low. + Without this code, compact flash will not work in Linux because + unlike U-Boot, Linux uses the IRQ, so this code is necessary if we + don't enable compact flash for U-Boot. + */ + + vsc7385_cpuctrl = (volatile u32 *)(CFG_VSC7385_BASE + 0x1c0c0); + *vsc7385_cpuctrl |= 0x0c; +#endif + +#ifdef CONFIG_COMPACT_FLASH + /* UPM Table Configuration Code */ + static uint UPMATable[] = { + 0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00, + 0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + 0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00, + 0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 + }; + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile lbus83xx_t *lbus = &immap->lbus; + + lbus->bank[3].br = CFG_BR3_PRELIM; + lbus->bank[3].or = CFG_OR3_PRELIM; + + /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, + GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 + */ + lbus->mamr = 0x08404440; + + upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); + + puts("UPMA: Configured for compact flash\n"); +#endif + + return 0; +} + +/* + * Make sure the EEPROM has the HRCW correctly programmed. + * Make sure the RTC is correctly programmed. + * + * The MPC8349E-mITX can be configured to load the HRCW from + * EEPROM instead of flash. This is controlled via jumpers + * LGPL0, 1, and 3. Normally, these jumpers are set to 000 (all + * jumpered), but if they're set to 001 or 010, then the HRCW is + * read from the "I2C EEPROM". + * + * This function makes sure that the I2C EEPROM is programmed + * correctly. + */ +int misc_init_r(void) +{ + int rc = 0; + +#ifdef CONFIG_HARD_I2C + + unsigned int orig_bus = i2c_get_bus_num(); + u8 i2c_data; + +#ifdef CFG_I2C_RTC_ADDR + u8 ds1339_data[17]; +#endif + +#ifdef CFG_I2C_EEPROM_ADDR + static u8 eeprom_data[] = /* HRCW data */ + { + 0xAA, 0x55, 0xAA, /* Preamble */ + 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ + 0x02, 0x40, /* RCWL ADDR=0x0_0900 */ + (CFG_HRCW_LOW >> 24) & 0xFF, + (CFG_HRCW_LOW >> 16) & 0xFF, + (CFG_HRCW_LOW >> 8) & 0xFF, + CFG_HRCW_LOW & 0xFF, + 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ + 0x02, 0x41, /* RCWH ADDR=0x0_0904 */ + (CFG_HRCW_HIGH >> 24) & 0xFF, + (CFG_HRCW_HIGH >> 16) & 0xFF, + (CFG_HRCW_HIGH >> 8) & 0xFF, + CFG_HRCW_HIGH & 0xFF + }; + + u8 data[sizeof(eeprom_data)]; +#endif + + printf("Board revision: "); + i2c_set_bus_num(1); + if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) + printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); + else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) + printf("%u.%u (PCF8475)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); + else { + printf("Unknown\n"); + rc = 1; + } + +#ifdef CFG_I2C_EEPROM_ADDR + i2c_set_bus_num(0); + + if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) { + if (memcmp(data, eeprom_data, sizeof(data)) != 0) { + if (i2c_write + (CFG_I2C_EEPROM_ADDR, 0, 2, eeprom_data, + sizeof(eeprom_data)) != 0) { + puts("Failure writing the HRCW to EEPROM via I2C.\n"); + rc = 1; + } + } + } else { + puts("Failure reading the HRCW from EEPROM via I2C.\n"); + rc = 1; + } +#endif + +#ifdef CFG_I2C_RTC_ADDR + i2c_set_bus_num(1); + + if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data)) + == 0) { + + /* Work-around for MPC8349E-mITX bug #13601. + If the RTC does not contain valid register values, the DS1339 + Linux driver will not work. + */ + + /* Make sure status register bits 6-2 are zero */ + ds1339_data[0x0f] &= ~0x7c; + + /* Check for a valid day register value */ + ds1339_data[0x03] &= ~0xf8; + if (ds1339_data[0x03] == 0) { + ds1339_data[0x03] = 1; + } + + /* Check for a valid date register value */ + ds1339_data[0x04] &= ~0xc0; + if ((ds1339_data[0x04] == 0) || + ((ds1339_data[0x04] & 0x0f) > 9) || + (ds1339_data[0x04] >= 0x32)) { + ds1339_data[0x04] = 1; + } + + /* Check for a valid month register value */ + ds1339_data[0x05] &= ~0x60; + + if ((ds1339_data[0x05] == 0) || + ((ds1339_data[0x05] & 0x0f) > 9) || + ((ds1339_data[0x05] >= 0x13) + && (ds1339_data[0x05] <= 0x19))) { + ds1339_data[0x05] = 1; + } + + /* Enable Oscillator and rate select */ + ds1339_data[0x0e] = 0x1c; + + /* Work-around for MPC8349E-mITX bug #13330. + Ensure that the RTC control register contains the value 0x1c. + This affects SATA performance. + */ + + if (i2c_write + (CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, + sizeof(ds1339_data))) { + puts("Failure writing to the RTC via I2C.\n"); + rc = 1; + } + } else { + puts("Failure reading from the RTC via I2C.\n"); + rc = 1; + } +#endif + + i2c_set_bus_num(orig_bus); +#endif + + return rc; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc8349itx/pci.c b/board/freescale/mpc8349itx/pci.c new file mode 100644 index 0000000..5ca094d --- /dev/null +++ b/board/freescale/mpc8349itx/pci.c @@ -0,0 +1,392 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#ifdef CONFIG_PCI + +#include <asm/mmu.h> +#include <asm/global_data.h> +#include <pci.h> +#include <asm/mpc8349_pci.h> +#include <i2c.h> +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc8349itx_config_table[] = { + { + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + PCI_IDSEL_NUMBER, + PCI_ANY_ID, + pci_cfgfunc_config_device, + { + PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} + }, + {} +}; +#endif + +static struct pci_controller pci_hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349itx_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349itx_config_table, +#endif + } +}; + +/************************************************************************** + * pci_init_board() + * + * NOTICE: PCI2 is not currently supported + * + */ +void pci_init_board(void) +{ + volatile immap_t *immr; + volatile clk83xx_t *clk; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + u8 reg8; + u16 reg16; + u32 reg32; + u32 dev; + struct pci_controller *hose; + + immr = (immap_t *) CFG_IMMR; + clk = (clk83xx_t *) & immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + + hose = &pci_hose[0]; + + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + + reg32 = clk->occr; + udelay(2000); + +#ifdef CONFIG_HARD_I2C + i2c_set_bus_num(1); + /* Read the PCI_M66EN jumper setting */ + if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0) || + (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0)) { + if (reg8 & I2C_8574_PCI66) + clk->occr = 0xff000000; /* 66 MHz PCI */ + else + clk->occr = 0xff600001; /* 33 MHz PCI */ + } else { + clk->occr = 0xff600001; /* 33 MHz PCI */ + } +#else + clk->occr = 0xff000000; /* 66 MHz PCI */ +#endif + + udelay(2000); + + /* + * Release PCI RST Output signal + */ + pci_ctrl[0].gcr = 0; + udelay(2000); + pci_ctrl[0].gcr = 1; + +#ifdef CONFIG_MPC83XX_PCI2 + pci_ctrl[1].gcr = 0; + udelay(2000); + pci_ctrl[1].gcr = 1; +#endif + + /* We need to wait at least a 1sec based on PCI specs */ + { + int i; + + for (i = 0; i < 1000; i++) + udelay(1000); + } + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI1 mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | POCMR_CM_256M; + + /* PCI1 IO space */ + pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M; + + /* PCI1 mmio - non-prefetch mem space */ + pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M; + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MMIO_BASE, + CFG_PCI1_MMIO_PHYS, CFG_PCI1_MMIO_SIZE, PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); + +#ifdef CONFIG_MPC83XX_PCI2 + hose = &pci_hose[1]; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI2 mem space - prefetch */ + pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | POCMR_CM_256M; + + /* PCI2 IO space */ + pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | POCMR_CM_16M; + + /* PCI2 mmio - non-prefetch mem space */ + pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_CM_256M; + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[1].pitar1 = 0x0; + pci_ctrl[1].pibar1 = 0x0; + pci_ctrl[1].piebar1 = 0x0; + pci_ctrl[1].piwar1 = + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | + (__ilog2(gd->ram_size) - 1); + + hose->first_busno = pci_hose[0].last_busno + 1; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI2_MEM_BASE, + CFG_PCI2_MEM_PHYS, + CFG_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI2_MMIO_BASE, + CFG_PCI2_MMIO_PHYS, CFG_PCI2_MMIO_SIZE, PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI2_IO_BASE, + CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMR + 0x8380), (CFG_IMMR + 0x8384)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +#endif +} + +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[0].first_busno); + tmp[1] = cpu_to_be32(pci_hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#ifdef CONFIG_MPC83XX_PCI2 + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[1].first_busno); + tmp[1] = cpu_to_be32(pci_hose[1].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#endif +} +#elif defined(CONFIG_OF_FLAT_TREE) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[0].first_busno; + p[1] = pci_hose[0].last_busno; + } + +#ifdef CONFIG_MPC83XX_PCI2 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[1].first_busno; + p[1] = pci_hose[1].last_busno; + } +#endif +} +#endif /* CONFIG_OF_FLAT_TREE */ +#endif /* CONFIG_PCI */ diff --git a/board/freescale/mpc8360emds/Makefile b/board/freescale/mpc8360emds/Makefile new file mode 100644 index 0000000..5ec7a87 --- /dev/null +++ b/board/freescale/mpc8360emds/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc8360emds/config.mk b/board/freescale/mpc8360emds/config.mk new file mode 100644 index 0000000..9ace886 --- /dev/null +++ b/board/freescale/mpc8360emds/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC8360EMDS +# + +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c new file mode 100644 index 0000000..e050cd4 --- /dev/null +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -0,0 +1,313 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <common.h> +#include <ioports.h> +#include <mpc83xx.h> +#include <i2c.h> +#include <spd.h> +#include <miiphy.h> +#if defined(CONFIG_PCI) +#include <pci.h> +#endif +#if defined(CONFIG_SPD_EEPROM) +#include <spd_sdram.h> +#else +#include <asm/mmu.h> +#endif +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../common/pq-mds-pib.h" +#endif + +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* GETH1 */ + {0, 3, 1, 0, 1}, /* TxD0 */ + {0, 4, 1, 0, 1}, /* TxD1 */ + {0, 5, 1, 0, 1}, /* TxD2 */ + {0, 6, 1, 0, 1}, /* TxD3 */ + {1, 6, 1, 0, 3}, /* TxD4 */ + {1, 7, 1, 0, 1}, /* TxD5 */ + {1, 9, 1, 0, 2}, /* TxD6 */ + {1, 10, 1, 0, 2}, /* TxD7 */ + {0, 9, 2, 0, 1}, /* RxD0 */ + {0, 10, 2, 0, 1}, /* RxD1 */ + {0, 11, 2, 0, 1}, /* RxD2 */ + {0, 12, 2, 0, 1}, /* RxD3 */ + {0, 13, 2, 0, 1}, /* RxD4 */ + {1, 1, 2, 0, 2}, /* RxD5 */ + {1, 0, 2, 0, 2}, /* RxD6 */ + {1, 4, 2, 0, 2}, /* RxD7 */ + {0, 7, 1, 0, 1}, /* TX_EN */ + {0, 8, 1, 0, 1}, /* TX_ER */ + {0, 15, 2, 0, 1}, /* RX_DV */ + {0, 16, 2, 0, 1}, /* RX_ER */ + {0, 0, 2, 0, 1}, /* RX_CLK */ + {2, 9, 1, 0, 3}, /* GTX_CLK - CLK10 */ + {2, 8, 2, 0, 1}, /* GTX125 - CLK9 */ + /* GETH2 */ + {0, 17, 1, 0, 1}, /* TxD0 */ + {0, 18, 1, 0, 1}, /* TxD1 */ + {0, 19, 1, 0, 1}, /* TxD2 */ + {0, 20, 1, 0, 1}, /* TxD3 */ + {1, 2, 1, 0, 1}, /* TxD4 */ + {1, 3, 1, 0, 2}, /* TxD5 */ + {1, 5, 1, 0, 3}, /* TxD6 */ + {1, 8, 1, 0, 3}, /* TxD7 */ + {0, 23, 2, 0, 1}, /* RxD0 */ + {0, 24, 2, 0, 1}, /* RxD1 */ + {0, 25, 2, 0, 1}, /* RxD2 */ + {0, 26, 2, 0, 1}, /* RxD3 */ + {0, 27, 2, 0, 1}, /* RxD4 */ + {1, 12, 2, 0, 2}, /* RxD5 */ + {1, 13, 2, 0, 3}, /* RxD6 */ + {1, 11, 2, 0, 2}, /* RxD7 */ + {0, 21, 1, 0, 1}, /* TX_EN */ + {0, 22, 1, 0, 1}, /* TX_ER */ + {0, 29, 2, 0, 1}, /* RX_DV */ + {0, 30, 2, 0, 1}, /* RX_ER */ + {0, 31, 2, 0, 1}, /* RX_CLK */ + {2, 2, 1, 0, 2}, /* GTX_CLK = CLK10 */ + {2, 3, 2, 0, 1}, /* GTX125 - CLK4 */ + + {0, 1, 3, 0, 2}, /* MDIO */ + {0, 2, 1, 0, 1}, /* MDC */ + + {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ +}; + +int board_early_init_f(void) +{ + + u8 *bcsr = (u8 *)CFG_BCSR; + const immap_t *immr = (immap_t *)CFG_IMMR; + + /* Enable flash write */ + bcsr[0xa] &= ~0x04; + + /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2 h/w bug workaround) */ + if (immr->sysconf.spridr == SPR_8360_REV20 || + immr->sysconf.spridr == SPR_8360E_REV20 || + immr->sysconf.spridr == SPR_8360_REV21 || + immr->sysconf.spridr == SPR_8360E_REV21) + bcsr[0xe] = 0x30; + + return 0; +} + +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +extern void ddr_enable_ecc(unsigned int dram_size); +#endif +int fixed_sdram(void); +void sdram_init(void); + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; +#if defined(CONFIG_SPD_EEPROM) + msize = spd_sdram(); +#else + msize = fixed_sdram(); +#endif + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) + /* + * Initialize DDR ECC byte + */ + ddr_enable_ecc(msize * 1024 * 1024); +#endif + /* + * Initialize SDRAM if it is on local bus. + */ + sdram_init(); + + /* return total bus SDRAM size(bytes) -- DDR */ + return (msize * 1024 * 1024); +} + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CFG_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { + if (ddr_size & 1) { + return -1; + } + } + im->sysconf.ddrlaw[0].ar = + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); +#if (CFG_DDR_SIZE != 256) +#warning Currenly any ddr size other than 256 is not supported +#endif +#ifdef CONFIG_DDR_II + im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE2; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; +#else + im->ddr.csbnds[0].csbnds = 0x00000007; + im->ddr.csbnds[1].csbnds = 0x0008000f; + + im->ddr.cs_config[0] = CFG_DDR_CONFIG; + im->ddr.cs_config[1] = CFG_DDR_CONFIG; + + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.sdram_cfg = CFG_DDR_CONTROL; + + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; +#endif + udelay(200); + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + return msize; +} +#endif /*!CFG_SPD_EEPROM */ + +int checkboard(void) +{ + puts("Board: Freescale MPC8360EMDS\n"); + return 0; +} + +/* + * if MPC8360EMDS is soldered with SDRAM + */ +#if defined(CFG_BR2_PRELIM) \ + && defined(CFG_OR2_PRELIM) \ + && defined(CFG_LBLAWBAR2_PRELIM) \ + && defined(CFG_LBLAWAR2_PRELIM) +/* + * Initialize SDRAM memory on the Local Bus. + */ + +void sdram_init(void) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile lbus83xx_t *lbc = &immap->lbus; + uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; + + /* + * Setup SDRAM Base and Option Registers, already done in cpu_init.c + */ + /*setup mtrpt, lsrt and lbcr for LB bus */ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CFG_LBC_LSRT; + asm("sync"); + + /* + * Configure the SDRAM controller Machine Mode Register. + */ + lbc->lsdmr = CFG_LBC_LSDMR_5; /* Normal Operation */ + lbc->lsdmr = CFG_LBC_LSDMR_1; /* Precharge All Banks */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + /* + * We need do 8 times auto refresh operation. + */ + lbc->lsdmr = CFG_LBC_LSDMR_2; + asm("sync"); + *sdram_addr = 0xff; /* 1 times */ + udelay(100); + *sdram_addr = 0xff; /* 2 times */ + udelay(100); + *sdram_addr = 0xff; /* 3 times */ + udelay(100); + *sdram_addr = 0xff; /* 4 times */ + udelay(100); + *sdram_addr = 0xff; /* 5 times */ + udelay(100); + *sdram_addr = 0xff; /* 6 times */ + udelay(100); + *sdram_addr = 0xff; /* 7 times */ + udelay(100); + *sdram_addr = 0xff; /* 8 times */ + udelay(100); + + /* Mode register write operation */ + lbc->lsdmr = CFG_LBC_LSDMR_4; + asm("sync"); + *(sdram_addr + 0xcc) = 0xff; + udelay(100); + + /* Normal operation */ + lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000; + asm("sync"); + *sdram_addr = 0xff; + udelay(100); +} +#else +void sdram_init(void) +{ +} +#endif + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc8360emds/pci.c b/board/freescale/mpc8360emds/pci.c new file mode 100644 index 0000000..cf7ef90 --- /dev/null +++ b/board/freescale/mpc8360emds/pci.c @@ -0,0 +1,298 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/* + * PCI Configuration space access support for MPC83xx PCI Bridge + */ +#include <asm/mmu.h> +#include <asm/io.h> +#include <common.h> +#include <pci.h> +#include <i2c.h> +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif + +#include <asm/fsl_i2c.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_PCI) +#define PCI_FUNCTION_CONFIG 0x44 +#define PCI_FUNCTION_CFG_LOCK 0x20 + +/* + * Initialize PCI Devices, report devices found + */ +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxemds_config_table[] = { + { + PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + pci_cfgfunc_config_device, + {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} + }, + {} +} +#endif +static struct pci_controller hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxemds_config_table, +#endif + }, +}; + +/********************************************************************** + * pci_init_board() + *********************************************************************/ +void pci_init_board(void) +#ifdef CONFIG_PCISLAVE +{ + u16 reg16; + volatile immap_t *immr; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + immr = (immap_t *) CFG_IMMR; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar0 = 0x0; + pci_ctrl[0].pibar0 = 0x0; + pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | PIWAR_IWS_4K; + + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 &= ~PIWAR_EN; + + pci_ctrl[0].pitar2 = 0x0; + pci_ctrl[0].pibar2 = 0x0; + pci_ctrl[0].piebar2 = 0x0; + pci_ctrl[0].piwar2 &= ~PIWAR_EN; + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + pci_setup_indirect(&hose[0], + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + reg16 = 0xff; + + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_STATUS, 0xffff); + pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), + PCI_LATENCY_TIMER, 0x80); + + /* + * Unlock configuration lock in PCI function configuration register. + */ + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, ®16); + reg16 &= ~(PCI_FUNCTION_CFG_LOCK); + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, reg16); + + printf("Enabled PCI 32bit Agent Mode\n"); +} +#else +{ + volatile immap_t *immr; + volatile clk83xx_t *clk; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + u16 reg16; + u32 val32; + u32 dev; + + immr = (immap_t *) CFG_IMMR; + clk = (clk83xx_t *) & immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + val32 = clk->occr; + udelay(2000); +#if defined(PCI_66M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#elif defined(PCI_33M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | + OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; + printf("PCI clock is 33MHz\n"); +#else + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#endif + udelay(2000); + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; + + pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = + POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI mmio - non-prefetch mem space */ + pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI IO space */ + pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; + pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | + PIWAR_IWS_2G; + + /* + * Release PCI RST Output signal + */ + udelay(2000); + pci_ctrl[0].gcr = 1; + udelay(2000); + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose[0].regions + 0, + CFG_PCI_MEM_BASE, + CFG_PCI_MEM_PHYS, + CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose[0].regions + 1, + CFG_PCI_MMIO_BASE, + CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose[0].regions + 2, + CFG_PCI_IO_BASE, + CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose[0].regions + 3, + CFG_PCI_SLV_MEM_LOCAL, + CFG_PCI_SLV_MEM_BUS, + CFG_PCI_SLV_MEM_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose[0].region_count = 4; + + pci_setup_indirect(&hose[0], + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + + pci_register_hose(hose); + + /* + * Write command register + */ + reg16 = 0xff; + dev = PCI_BDF(0, 0, 0); + pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +} +#endif /* CONFIG_PCISLAVE */ + +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(hose[0].first_busno); + tmp[1] = cpu_to_be32(hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +} +#elif defined(CONFIG_OF_FLAT_TREE) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = hose[0].first_busno; + p[1] = hose[0].last_busno; + } +} +#endif /* CONFIG_OF_FLAT_TREE */ +#endif /* CONFIG_PCI */ diff --git a/board/freescale/mpc8544ds/Makefile b/board/freescale/mpc8544ds/Makefile index bec2168..006fdc9 100644 --- a/board/freescale/mpc8544ds/Makefile +++ b/board/freescale/mpc8544ds/Makefile @@ -24,14 +24,9 @@ include $(TOPDIR)/config.mk -# ifneq ($(OBJTREE),$(SRCTREE)) -# $(shell mkdir -p $(obj)./common) -# endif - LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o \ - ../common/pixis.o +COBJS := $(BOARD).o SOBJS := init.o diff --git a/board/freescale/mpc8544ds/init.S b/board/freescale/mpc8544ds/init.S index 296fee5..68ccba7 100644 --- a/board/freescale/mpc8544ds/init.S +++ b/board/freescale/mpc8544ds/init.S @@ -52,8 +52,8 @@ */ #define entry_start \ - mflr r1 ; \ - bl 0f ; + mflr r1 ; \ + bl 0f ; #define entry_end \ 0: mflr r0 ; \ @@ -214,11 +214,11 @@ law_entry: .long 0 .long (LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN - .long (CFG_PCI1_MEM_BASE>>12) & 0xfffff + .long (CFG_PCI1_MEM_PHYS>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M) .long (CFG_PCI1_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M) + .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_64K) .long (CFG_LBC_CACHE_BASE>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M) @@ -226,18 +226,17 @@ law_entry: .long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_256M) - /* To keep to 10 LAWs, PCIE1_IO_PHYS must use top of mem region */ + .long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff + .long LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_64K) .long (CFG_PCIE2_MEM_PHYS>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_512M) .long (CFG_PCIE2_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_16M) + .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_64K) + /* contains both PCIE3 MEM & IO space */ .long (CFG_PCIE3_MEM_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_256M) - - .long (CFG_PCIE3_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_16M) + .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_4M) 4: entry_end diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 4ff1da9..76d9091 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -22,8 +22,11 @@ #include <common.h> #include <command.h> +#include <pci.h> #include <asm/processor.h> #include <asm/immap_85xx.h> +#include <asm/immap_fsl_pci.h> +#include <asm/io.h> #include <spd.h> #include <miiphy.h> @@ -51,12 +54,19 @@ int checkboard (void) { volatile immap_t *immap = (immap_t *) CFG_CCSRBAR; volatile ccsr_gur_t *gur = &immap->im_gur; + volatile ccsr_lbc_t *lbc = &immap->im_lbc; + volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm; if ((uint)&gur->porpllsr != 0xe00e0000) { printf("immap size error %x\n",&gur->porpllsr); } printf ("Board: MPC8544DS\n"); + lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */ + lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */ + ecm->eedr = 0xffffffff; /* Clear ecm errors */ + ecm->eeer = 0xffffffff; /* Enable ecm errors */ + return 0; } @@ -118,6 +128,321 @@ testdram(void) } #endif +#ifdef CONFIG_PCI1 +static struct pci_controller pci1_hose; +#endif + +#ifdef CONFIG_PCIE1 +static struct pci_controller pcie1_hose; +#endif + +#ifdef CONFIG_PCIE2 +static struct pci_controller pcie2_hose; +#endif + +#ifdef CONFIG_PCIE3 +static struct pci_controller pcie3_hose; +#endif + +int first_free_busno=0; + +void +pci_init_board(void) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile ccsr_gur_t *gur = &immap->im_gur; + uint devdisr = gur->devdisr; + uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; + + debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n", + devdisr, io_sel, host_agent); + + if (io_sel & 1) { + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) + printf (" eTSEC1 is in sgmii mode.\n"); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + printf (" eTSEC3 is in sgmii mode.\n"); + } + +#ifdef CONFIG_PCIE3 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pcie3_hose; + int pcie_ep = (host_agent == 3); + int pcie_configured = io_sel >= 1; + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + printf ("\n PCIE3 connected to ULI as %s (base address %x)", + pcie_ep ? "End Point" : "Root Complex", + (uint)pci); + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); + } + printf ("\n"); + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCIE3_MEM_BASE, + CFG_PCIE3_MEM_PHYS, + CFG_PCIE3_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCIE3_IO_BASE, + CFG_PCIE3_IO_PHYS, + CFG_PCIE3_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; +#ifdef CFG_PCIE3_MEM_BASE2 + /* outbound memory */ + pci_set_region(hose->regions + 3, + CFG_PCIE3_MEM_BASE2, + CFG_PCIE3_MEM_PHYS2, + CFG_PCIE3_MEM_SIZE2, + PCI_REGION_MEM); + hose->region_count++; +#endif + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + + first_free_busno=hose->last_busno+1; + printf (" PCIE3 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); + + /* + * Activate ULI1575 legacy chip by performing a fake + * memory access. Needed to make ULI RTC work. + */ + in_be32(CFG_PCIE3_MEM_BASE); + } else { + printf (" PCIE3: disabled\n"); + } + + } +#else + gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */ +#endif + +#ifdef CONFIG_PCIE1 + { + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pcie1_hose; + int pcie_ep = (host_agent == 5); + int pcie_configured = io_sel & 6; + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + printf ("\n PCIE1 connected to Slot2 as %s (base address %x)", + pcie_ep ? "End Point" : "Root Complex", + (uint)pci); + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); + } + printf ("\n"); + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCIE1_MEM_BASE, + CFG_PCIE1_MEM_PHYS, + CFG_PCIE1_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCIE1_IO_BASE, + CFG_PCIE1_IO_PHYS, + CFG_PCIE1_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; +#ifdef CFG_PCIE1_MEM_BASE2 + /* outbound memory */ + pci_set_region(hose->regions + 3, + CFG_PCIE1_MEM_BASE2, + CFG_PCIE1_MEM_PHYS2, + CFG_PCIE1_MEM_SIZE2, + PCI_REGION_MEM); + hose->region_count++; +#endif + hose->first_busno=first_free_busno; + + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + + first_free_busno=hose->last_busno+1; + printf(" PCIE1 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); + + } else { + printf (" PCIE1: disabled\n"); + } + + } +#else + gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ +#endif + +#ifdef CONFIG_PCIE2 + { + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pcie2_hose; + int pcie_ep = (host_agent == 3); + int pcie_configured = io_sel & 4; + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)", + pcie_ep ? "End Point" : "Root Complex", + (uint)pci); + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); + } + printf ("\n"); + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCIE2_MEM_BASE, + CFG_PCIE2_MEM_PHYS, + CFG_PCIE2_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCIE2_IO_BASE, + CFG_PCIE2_IO_PHYS, + CFG_PCIE2_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; +#ifdef CFG_PCIE2_MEM_BASE2 + /* outbound memory */ + pci_set_region(hose->regions + 3, + CFG_PCIE2_MEM_BASE2, + CFG_PCIE2_MEM_PHYS2, + CFG_PCIE2_MEM_SIZE2, + PCI_REGION_MEM); + hose->region_count++; +#endif + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + first_free_busno=hose->last_busno+1; + printf (" PCIE2 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); + + } else { + printf (" PCIE2: disabled\n"); + } + + } +#else + gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */ +#endif + + +#ifdef CONFIG_PCI1 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pci1_hose; + + uint pci_agent = (host_agent == 6); + uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */ + uint pci_32 = 1; + uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */ + uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */ + + + if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { + printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %x)\n", + (pci_32) ? 32 : 64, + (pci_speed == 33333000) ? "33" : + (pci_speed == 66666000) ? "66" : "unknown", + pci_clk_sel ? "sync" : "async", + pci_agent ? "agent" : "host", + pci_arb ? "arbiter" : "external-arbiter", + (uint)pci + ); + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + hose->region_count = 3; +#ifdef CFG_PCIE3_MEM_BASE2 + /* outbound memory */ + pci_set_region(hose->regions + 3, + CFG_PCIE3_MEM_BASE2, + CFG_PCIE3_MEM_PHYS2, + CFG_PCIE3_MEM_SIZE2, + PCI_REGION_MEM); + hose->region_count++; +#endif + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + first_free_busno=hose->last_busno+1; + printf ("PCI on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); + } else { + printf (" PCI: disabled\n"); + } +} +#else + gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */ +#endif +} + + int last_stage_init(void) { return 0; @@ -197,5 +522,37 @@ ft_board_setup(void *blob, bd_t *bd) *p++ = cpu_to_be32(bd->bi_memstart); *p = cpu_to_be32(bd->bi_memsize); } +#ifdef CONFIG_PCI1 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len); + if (p != NULL) { + p[0] = 0; + p[1] = pci1_hose.last_busno - pci1_hose.first_busno; + debug("PCI@8000 first_busno=%d last_busno=%d\n",p[0],p[1]); + } +#endif +#ifdef CONFIG_PCIE1 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@a000/bus-range", &len); + if (p != NULL) { + p[0] = 0; + p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; + debug("PCI@a000 first_busno=%d last_busno=%d\n",p[0],p[1]); + } +#endif +#ifdef CONFIG_PCIE2 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@9000/bus-range", &len); + if (p != NULL) { + p[0] = 0; + p[1] = pcie2_hose.last_busno - pcie2_hose.first_busno; + debug("PCI@9000 first_busno=%d last_busno=%d\n",p[0],p[1]); + } +#endif +#ifdef CONFIG_PCIE3 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@b000/bus-range", &len); + if (p != NULL) { + p[0] = 0; + p[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;; + debug("PCI@b000 first_busno=%d last_busno=%d\n",p[0],p[1]); + } +#endif } #endif diff --git a/board/freescale/mpc8641hpcn/Makefile b/board/freescale/mpc8641hpcn/Makefile new file mode 100644 index 0000000..201da3e --- /dev/null +++ b/board/freescale/mpc8641hpcn/Makefile @@ -0,0 +1,53 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o + +SOBJS := init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) $(SOBJS) + +.PHONY: distclean +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude ($obj).depend + +######################################################################### diff --git a/board/freescale/mpc8641hpcn/config.mk b/board/freescale/mpc8641hpcn/config.mk new file mode 100644 index 0000000..f778dcb --- /dev/null +++ b/board/freescale/mpc8641hpcn/config.mk @@ -0,0 +1,31 @@ +# Copyright 2004 Freescale Semiconductor. +# Modified by Jeff Brown +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# mpc8641hpcn board +# default CCSRBAR is at 0xff700000 +# assume U-Boot is less than 0.5MB +# +TEXT_BASE = 0xfff00000 + +PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1 +PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float diff --git a/board/freescale/mpc8641hpcn/init.S b/board/freescale/mpc8641hpcn/init.S new file mode 100644 index 0000000..cb21ba6 --- /dev/null +++ b/board/freescale/mpc8641hpcn/init.S @@ -0,0 +1,179 @@ +/* + * Copyright 2004 Freescale Semiconductor. + * Jeff Brown + * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <ppc_asm.tmpl> +#include <ppc_defs.h> +#include <asm/cache.h> +#include <asm/mmu.h> +#include <config.h> +#include <mpc86xx.h> + +/* + * LAW(Local Access Window) configuration: + * + * 0x0000_0000 0x7fff_ffff DDR 2G + * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M + * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M + * 0xc000_0000 0xdfff_ffff RapidIO 512M + * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M + * 0xe300_0000 0xe3ff_ffff PCI2 IO 16M + * 0xf800_0000 0xf80f_ffff CCSRBAR 1M + * 0xf810_0000 0xf81f_ffff PIXIS 1M + * 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M + * + * Notes: + * CCSRBAR don't need a configured Local Access Window. + * If flash is 8M at default position (last 8M), no LAW needed. + */ + +#if !defined(CONFIG_SPD_EEPROM) +#define LAWBAR1 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff) +#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_DDR1 | (LAWAR_SIZE & LAWAR_SIZE_256M)) +#else +#define LAWBAR1 0 +#define LAWAR1 ((LAWAR_TRGT_IF_DDR1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN) +#endif + +#define LAWBAR2 ((CFG_PCI1_MEM_BASE>>12) & 0xffffff) +#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) + +#define LAWBAR3 ((CFG_PCI2_MEM_BASE>>12) & 0xffffff) +#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) + +/* + * This is not so much the SDRAM map as it is the whole localbus map. + */ +#define LAWBAR4 ((0xf8100000>>12) & 0xffffff) +#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_2M)) + +#define LAWBAR5 ((CFG_PCI1_IO_PHYS>>12) & 0xffffff) +#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M)) + +#define LAWBAR6 ((CFG_PCI2_IO_PHYS>>12) & 0xffffff) +#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M)) + +#define LAWBAR7 ((0xfe000000 >>12) & 0xffffff) +#define LAWAR7 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_32M)) + +#if !defined(CONFIG_SPD_EEPROM) +#define LAWBAR8 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff) +#define LAWAR8 (LAWAR_EN | LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_256M)) +#else +#define LAWBAR8 0 +#define LAWAR8 ((LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN) +#endif + +#define LAWBAR9 ((CFG_RIO_MEM_PHYS>>12) & 0xfffff) +#define LAWAR9 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)) + + .section .bootpg, "ax" + .globl law_entry +law_entry: + lis r7,CFG_CCSRBAR@h + ori r7,r7,CFG_CCSRBAR@l + + addi r4,r7,0 + addi r5,r7,0 + + /* Skip LAWAR0, start at LAWAR1 */ + lis r6,LAWBAR1@h + ori r6,r6,LAWBAR1@l + stwu r6, 0xc28(r4) + + lis r6,LAWAR1@h + ori r6,r6,LAWAR1@l + stwu r6, 0xc30(r5) + + /* LAWBAR2, LAWAR2 */ + lis r6,LAWBAR2@h + ori r6,r6,LAWBAR2@l + stwu r6, 0x20(r4) + + lis r6,LAWAR2@h + ori r6,r6,LAWAR2@l + stwu r6, 0x20(r5) + + /* LAWBAR3, LAWAR3 */ + lis r6,LAWBAR3@h + ori r6,r6,LAWBAR3@l + stwu r6, 0x20(r4) + + lis r6,LAWAR3@h + ori r6,r6,LAWAR3@l + stwu r6, 0x20(r5) + + /* LAWBAR4, LAWAR4 */ + lis r6,LAWBAR4@h + ori r6,r6,LAWBAR4@l + stwu r6, 0x20(r4) + + lis r6,LAWAR4@h + ori r6,r6,LAWAR4@l + stwu r6, 0x20(r5) + /* LAWBAR5, LAWAR5 */ + lis r6,LAWBAR5@h + ori r6,r6,LAWBAR5@l + stwu r6, 0x20(r4) + + lis r6,LAWAR5@h + ori r6,r6,LAWAR5@l + stwu r6, 0x20(r5) + + /* LAWBAR6, LAWAR6 */ + lis r6,LAWBAR6@h + ori r6,r6,LAWBAR6@l + stwu r6, 0x20(r4) + + lis r6,LAWAR6@h + ori r6,r6,LAWAR6@l + stwu r6, 0x20(r5) + + /* LAWBAR7, LAWAR7 */ + lis r6,LAWBAR7@h + ori r6,r6,LAWBAR7@l + stwu r6, 0x20(r4) + + lis r6,LAWAR7@h + ori r6,r6,LAWAR7@l + stwu r6, 0x20(r5) + + /* LAWBAR8, LAWAR8 */ + lis r6,LAWBAR8@h + ori r6,r6,LAWBAR8@l + stwu r6, 0x20(r4) + + lis r6,LAWAR8@h + ori r6,r6,LAWAR8@l + stwu r6, 0x20(r5) + + /* LAWBAR9, LAWAR9 */ + lis r6,LAWBAR9@h + ori r6,r6,LAWBAR9@l + stwu r6, 0x20(r4) + + lis r6,LAWAR9@h + ori r6,r6,LAWAR9@l + stwu r6, 0x20(r5) + + blr diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c new file mode 100644 index 0000000..931be9f --- /dev/null +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -0,0 +1,423 @@ +/* + * Copyright 2006, 2007 Freescale Semiconductor. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <pci.h> +#include <asm/processor.h> +#include <asm/immap_86xx.h> +#include <asm/immap_fsl_pci.h> +#include <spd.h> +#include <asm/io.h> + +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +extern void ft_cpu_setup(void *blob, bd_t *bd); +#endif + +#include "../common/pixis.h" + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) +extern void ddr_enable_ecc(unsigned int dram_size); +#endif + +#if defined(CONFIG_SPD_EEPROM) +#include "spd_sdram.h" +#endif + +void sdram_init(void); +long int fixed_sdram(void); + + +int board_early_init_f(void) +{ + return 0; +} + +int checkboard(void) +{ + puts("Board: MPC8641HPCN\n"); + + return 0; +} + + +long int +initdram(int board_type) +{ + long dram_size = 0; + +#if defined(CONFIG_SPD_EEPROM) + dram_size = spd_sdram(); +#else + dram_size = fixed_sdram(); +#endif + +#if defined(CFG_RAMBOOT) + puts(" DDR: "); + return dram_size; +#endif + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + /* + * Initialize and enable DDR ECC. + */ + ddr_enable_ecc(dram_size); +#endif + + puts(" DDR: "); + return dram_size; +} + + +#if defined(CFG_DRAM_TEST) +int +testdram(void) +{ + uint *pstart = (uint *) CFG_MEMTEST_START; + uint *pend = (uint *) CFG_MEMTEST_END; + uint *p; + + puts("SDRAM test phase 1:\n"); + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + puts("SDRAM test phase 2:\n"); + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + puts("SDRAM test passed.\n"); + return 0; +} +#endif + + +#if !defined(CONFIG_SPD_EEPROM) +/* + * Fixed sdram init -- doesn't use serial presence detect. + */ +long int +fixed_sdram(void) +{ +#if !defined(CFG_RAMBOOT) + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile ccsr_ddr_t *ddr = &immap->im_ddr1; + + ddr->cs0_bnds = CFG_DDR_CS0_BNDS; + ddr->cs0_config = CFG_DDR_CS0_CONFIG; + ddr->ext_refrec = CFG_DDR_EXT_REFRESH; + ddr->timing_cfg_0 = CFG_DDR_TIMING_0; + ddr->timing_cfg_1 = CFG_DDR_TIMING_1; + ddr->timing_cfg_2 = CFG_DDR_TIMING_2; + ddr->sdram_mode_1 = CFG_DDR_MODE_1; + ddr->sdram_mode_2 = CFG_DDR_MODE_2; + ddr->sdram_interval = CFG_DDR_INTERVAL; + ddr->sdram_data_init = CFG_DDR_DATA_INIT; + ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL; + ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL; + ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS; + +#if defined (CONFIG_DDR_ECC) + ddr->err_disable = 0x0000008D; + ddr->err_sbe = 0x00ff0000; +#endif + asm("sync;isync"); + + udelay(500); + +#if defined (CONFIG_DDR_ECC) + /* Enable ECC checking */ + ddr->sdram_cfg_1 = (CFG_DDR_CONTROL | 0x20000000); +#else + ddr->sdram_cfg_1 = CFG_DDR_CONTROL; + ddr->sdram_cfg_2 = CFG_DDR_CONTROL2; +#endif + asm("sync; isync"); + + udelay(500); +#endif + return CFG_SDRAM_SIZE * 1024 * 1024; +} +#endif /* !defined(CONFIG_SPD_EEPROM) */ + + +#if defined(CONFIG_PCI) +/* + * Initialize PCI Devices, report devices found. + */ + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_fsl86xxads_config_table[] = { + {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_IDSEL_NUMBER, PCI_ANY_ID, + pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}}, + {} +}; +#endif + + +static struct pci_controller pci1_hose = { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc86xxcts_config_table +#endif +}; +#endif /* CONFIG_PCI */ + +#ifdef CONFIG_PCI2 +static struct pci_controller pci2_hose; +#endif /* CONFIG_PCI2 */ + +int first_free_busno = 0; + + +void pci_init_board(void) +{ + volatile immap_t *immap = (immap_t *) CFG_CCSRBAR; + volatile ccsr_gur_t *gur = &immap->im_gur; + uint devdisr = gur->devdisr; + uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16; + +#ifdef CONFIG_PCI1 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pci1_hose; +#ifdef DEBUG + uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17; + uint pex1_agent = (host1_agent == 0) || (host1_agent == 1); +#endif + if ((io_sel == 2 || io_sel == 3 || io_sel == 5 + || io_sel == 6 || io_sel == 7 || io_sel == 0xF) + && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) { + debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host"); + debug("0x%08x=0x%08x ", &pci->pme_msg_det, pci->pme_msg_det); + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug(" with errors. Clearing. Now 0x%08x", + pci->pme_msg_det); + } + debug("\n"); + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; + + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + + first_free_busno=hose->last_busno+1; + printf (" PCI-EXPRESS 1 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); + + /* + * Activate ULI1575 legacy chip by performing a fake + * memory access. Needed to make ULI RTC work. + */ + in_be32((unsigned *) ((char *)(CFG_PCI1_MEM_BASE + + CFG_PCI1_MEM_SIZE - 0x1000000))); + + } else { + puts("PCI-EXPRESS 1: Disabled\n"); + } +} +#else + puts("PCI-EXPRESS1: Disabled\n"); +#endif /* CONFIG_PCI1 */ + +#ifdef CONFIG_PCI2 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pci2_hose; + + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCI2_MEM_BASE, + CFG_PCI2_MEM_PHYS, + CFG_PCI2_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCI2_IO_BASE, + CFG_PCI2_IO_PHYS, + CFG_PCI2_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; + + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + + first_free_busno=hose->last_busno+1; + printf (" PCI-EXPRESS 2 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); +} +#else + puts("PCI-EXPRESS 2: Disabled\n"); +#endif /* CONFIG_PCI2 */ + +} + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void +ft_board_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + ft_cpu_setup(blob, bd); + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#ifdef CONFIG_PCI1 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@8000/bus-range", &len); + if (p != NULL) { + p[0] = 0; + p[1] = pci1_hose.last_busno - pci1_hose.first_busno; + debug("PCI@8000 first_busno=%d last_busno=%d\n",p[0],p[1]); + } +#endif +#ifdef CONFIG_PCI2 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@9000/bus-range", &len); + if (p != NULL) { + p[0] = 0; + p[1] = pci2_hose.last_busno - pci2_hose.first_busno; + debug("PCI@9000 first_busno=%d last_busno=%d\n",p[0],p[1]); + } +#endif +} +#endif + + +/* + * get_board_sys_clk + * Reads the FPGA on board for CONFIG_SYS_CLK_FREQ + */ + +unsigned long +get_board_sys_clk(ulong dummy) +{ + u8 i, go_bit, rd_clks; + ulong val = 0; + + go_bit = in8(PIXIS_BASE + PIXIS_VCTL); + go_bit &= 0x01; + + rd_clks = in8(PIXIS_BASE + PIXIS_VCFGEN0); + rd_clks &= 0x1C; + + /* + * Only if both go bit and the SCLK bit in VCFGEN0 are set + * should we be using the AUX register. Remember, we also set the + * GO bit to boot from the alternate bank on the on-board flash + */ + + if (go_bit) { + if (rd_clks == 0x1c) + i = in8(PIXIS_BASE + PIXIS_AUX); + else + i = in8(PIXIS_BASE + PIXIS_SPD); + } else { + i = in8(PIXIS_BASE + PIXIS_SPD); + } + + i &= 0x07; + + switch (i) { + case 0: + val = 33000000; + break; + case 1: + val = 40000000; + break; + case 2: + val = 50000000; + break; + case 3: + val = 66000000; + break; + case 4: + val = 83000000; + break; + case 5: + val = 100000000; + break; + case 6: + val = 134000000; + break; + case 7: + val = 166000000; + break; + } + + return val; +} diff --git a/board/freescale/mpc8641hpcn/u-boot.lds b/board/freescale/mpc8641hpcn/u-boot.lds new file mode 100644 index 0000000..fd16362 --- /dev/null +++ b/board/freescale/mpc8641hpcn/u-boot.lds @@ -0,0 +1,136 @@ +/* + * Copyright 2006, 2007 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) + +SECTIONS +{ + + /* Read-only sections, merged into text segment: */ + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc86xx/start.o (.text) + board/freescale/mpc8641hpcn/init.o (.bootpg) + cpu/mpc86xx/traps.o (.text) + cpu/mpc86xx/interrupts.o (.text) + cpu/mpc86xx/cpu_init.o (.text) + cpu/mpc86xx/cpu.o (.text) + cpu/mpc86xx/speed.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + drivers/bios_emulator/atibios.o (.text) + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} |