diff options
Diffstat (limited to 'board/freescale')
58 files changed, 3624 insertions, 1805 deletions
diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index bb91e67..44c0978 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -28,16 +28,19 @@ #include <linux/ctype.h> typedef struct { - unsigned char id[4]; /* 0x0000 - 0x0003 */ - unsigned char sn[12]; /* 0x0004 - 0x000F */ - unsigned char errata[5]; /* 0x0010 - 0x0014 */ - unsigned char date[7]; /* 0x0015 - 0x001a */ - unsigned char res_1[37]; /* 0x001b - 0x003f */ - unsigned char tab_size; /* 0x0040 */ - unsigned char tab_flag; /* 0x0041 */ - unsigned char mac[8][6]; /* 0x0042 - 0x0071 */ - unsigned char res_2[126]; /* 0x0072 - 0x00ef */ - unsigned int crc; /* 0x00f0 - 0x00f3 crc32 checksum */ + u8 id[4]; /* 0x0000 - 0x0003 EEPROM Tag */ + u8 sn[12]; /* 0x0004 - 0x000F Serial Number */ + u8 errata[5]; /* 0x0010 - 0x0014 Errata Level */ + u8 date[6]; /* 0x0015 - 0x001a Build Date */ + u8 res_0; /* 0x001b Reserved */ + u8 version[4]; /* 0x001c - 0x001f Version */ + u8 tempcal[8]; /* 0x0020 - 0x0027 Temperature Calibration Factors*/ + u8 tempcalsys[2]; /* 0x0028 - 0x0029 System Temperature Calibration Factors*/ + u8 res_1[22]; /* 0x0020 - 0x003f Reserved */ + u8 mac_size; /* 0x0040 Mac table size */ + u8 mac_flag; /* 0x0041 Mac table flags */ + u8 mac[8][6]; /* 0x0042 - 0x0071 Mac addresses */ + u32 crc; /* 0x0072 crc32 checksum */ } EEPROM_data; static EEPROM_data mac_data; @@ -45,28 +48,57 @@ static EEPROM_data mac_data; int mac_show(void) { int i; + u8 mac_size; unsigned char ethaddr[8][18]; + unsigned char enetvar[32]; + + /* Show EEPROM tagID, + * always the four characters 'NXID'. + */ + printf("ID "); + for (i = 0; i < 4; i++) + printf("%c", mac_data.id[i]); + printf("\n"); + + /* Show Serial number, + * 0 to 11 charaters of errata information. + */ + printf("SN "); + for (i = 0; i < 12; i++) + printf("%c", mac_data.sn[i]); + printf("\n"); - printf("ID %c%c%c%c\n", - mac_data.id[0], - mac_data.id[1], - mac_data.id[2], - mac_data.id[3]); - printf("Errata %c%c%c%c%c\n", - mac_data.errata[0], - mac_data.errata[1], - mac_data.errata[2], - mac_data.errata[3], - mac_data.errata[4]); - printf("Date %c%c%c%c%c%c%c\n", + /* Show Errata Level, + * 0 to 4 characters of errata information. + */ + printf("Errata "); + for (i = 0; i < 5; i++) + printf("%c", mac_data.errata[i]); + printf("\n"); + + /* Show Build Date, + * BCD date values, as YYMMDDhhmmss. + */ + printf("Date 20%02x\/%02x\/%02x %02x:%02x:%02x\n", mac_data.date[0], mac_data.date[1], mac_data.date[2], mac_data.date[3], mac_data.date[4], - mac_data.date[5], - mac_data.date[6]); - for (i = 0; i < 8; i++) { + mac_data.date[5]); + + /* Show MAC table size, + * Value from 0 to 7 indicating how many MAC + * addresses are stored in the system EEPROM. + */ + if((mac_data.mac_size > 0) && (mac_data.mac_size <= 8)) + mac_size = mac_data.mac_size; + else + mac_size = 8; /* Set the max size */ + printf("MACSIZE %x\n", mac_size); + + /* Show Mac addresses */ + for (i = 0; i < mac_size; i++) { sprintf((char *)ethaddr[i], "%02x:%02x:%02x:%02x:%02x:%02x", mac_data.mac[i][0], @@ -76,12 +108,12 @@ int mac_show(void) mac_data.mac[i][4], mac_data.mac[i][5]); printf("MAC %d %s\n", i, ethaddr[i]); - } - setenv("ethaddr", (char *)ethaddr[0]); - setenv("eth1addr", (char *)ethaddr[1]); - setenv("eth2addr", (char *)ethaddr[2]); - setenv("eth3addr", (char *)ethaddr[3]); + sprintf((char *)enetvar, + i ? "eth%daddr" : "ethaddr", i); + setenv((char *)enetvar, (char *)ethaddr[i]); + + } return 0; } @@ -120,17 +152,14 @@ int mac_prog(void) unsigned char dev = ID_EEPROM_ADDR, *ptr; unsigned char *eeprom_data = (unsigned char *)(&mac_data); - for (i = 0; i < sizeof(mac_data.res_1); i++) - mac_data.res_1[i] = 0; - for (i = 0; i < sizeof(mac_data.res_2); i++) - mac_data.res_2[i] = 0; + mac_data.res_0 = 0; + memset((void *)mac_data.res_1, 0, sizeof(mac_data.res_1)); + length = sizeof(EEPROM_data); crc = crc32(crc, eeprom_data, length - 4); mac_data.crc = crc; for (i = 0, ptr = eeprom_data; i < length; i += 8, ptr += 8) { - ret = - i2c_write(dev, i, 1, ptr, - (length - i) < 8 ? (length - i) : 8); + ret = i2c_write(dev, i, 1, ptr, min((length - i),8)); udelay(5000); /* 5ms write cycle timing */ if (ret) break; @@ -179,12 +208,13 @@ int do_mac(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } break; case 'd': /* date */ - for (i = 0; i < 7; i++) { - mac_data.date[i] = argv[2][i]; + mac_val = simple_strtoull(argv[2], NULL, 16); + for (i = 0; i < 6; i++) { + mac_data.date[i] = (mac_val >> (40 - 8 * i)); } break; - case 'p': /* number of ports */ - mac_data.tab_size = + case 'p': /* mac table size */ + mac_data.mac_size = (unsigned char)simple_strtoul(argv[2], NULL, 16); break; case '0': /* mac 0 */ diff --git a/board/freescale/m52277evb/Makefile b/board/freescale/m52277evb/Makefile new file mode 100644 index 0000000..981763d --- /dev/null +++ b/board/freescale/m52277evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m52277evb/config.mk b/board/freescale/m52277evb/config.mk new file mode 100644 index 0000000..ce014ed --- /dev/null +++ b/board/freescale/m52277evb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0 diff --git a/board/freescale/m52277evb/m52277evb.c b/board/freescale/m52277evb/m52277evb.c new file mode 100644 index 0000000..98424c8 --- /dev/null +++ b/board/freescale/m52277evb/m52277evb.c @@ -0,0 +1,86 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/immap.h> + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale M52277 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM); + u32 dramsize, i; + + dramsize = CFG_SDRAM_SIZE * 0x100000; + + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + sdram->sdcs0 = (CFG_SDRAM_BASE | i); + + sdram->sdcfg1 = CFG_SDRAM_CFG1; + sdram->sdcfg2 = CFG_SDRAM_CFG2; + + /* Issue PALL */ + sdram->sdcr = CFG_SDRAM_CTRL | 2; + + /* Issue LEMR */ + /*sdram->sdmr = CFG_SDRAM_EMOD; */ + sdram->sdmr = CFG_SDRAM_MODE; + + udelay(1000); + + /* Issue PALL */ + sdram->sdcr = CFG_SDRAM_CTRL | 2; + + /* Perform two refresh cycles */ + sdram->sdcr = CFG_SDRAM_CTRL | 4; + sdram->sdcr = CFG_SDRAM_CTRL | 4; + + sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + + udelay(100); + + return (dramsize); +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} diff --git a/board/freescale/m52277evb/u-boot.lds b/board/freescale/m52277evb/u-boot.lds new file mode 100644 index 0000000..9125bfc --- /dev/null +++ b/board/freescale/m52277evb/u-boot.lds @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf5227x/start.o (.text) + cpu/mcf5227x/libmcf5227x.a (.text) + lib_m68k/libm68k.a (.text) + lib_generic/libgeneric.a (.text) + common/cmd_mem.o (.text) + common/main.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c index fefb42e..344a614 100644 --- a/board/freescale/m5329evb/nand.c +++ b/board/freescale/m5329evb/nand.c @@ -63,10 +63,10 @@ static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd) nand_baseaddr |= CLR_ALE; break; case NAND_CTL_SETWP: - fbcs->csmr2 |= CSMR_WP; + fbcs->csmr2 |= FBCS_CSMR_WP; break; case NAND_CTL_CLRWP: - fbcs->csmr2 &= ~CSMR_WP; + fbcs->csmr2 &= ~FBCS_CSMR_WP; break; } this->IO_ADDR_W = (void __iomem *)(nand_baseaddr); diff --git a/board/freescale/m5373evb/Makefile b/board/freescale/m5373evb/Makefile new file mode 100644 index 0000000..ab0f11e --- /dev/null +++ b/board/freescale/m5373evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o mii.o nand.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5373evb/config.mk b/board/freescale/m5373evb/config.mk new file mode 100644 index 0000000..ce014ed --- /dev/null +++ b/board/freescale/m5373evb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0 diff --git a/board/freescale/m5373evb/m5373evb.c b/board/freescale/m5373evb/m5373evb.c new file mode 100644 index 0000000..26b87b9 --- /dev/null +++ b/board/freescale/m5373evb/m5373evb.c @@ -0,0 +1,88 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/immap.h> + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale FireEngine 5373 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + u32 dramsize, i; + + dramsize = CFG_SDRAM_SIZE * 0x100000; + + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + sdram->cs0 = (CFG_SDRAM_BASE | i); + sdram->cfg1 = CFG_SDRAM_CFG1; + sdram->cfg2 = CFG_SDRAM_CFG2; + + /* Issue PALL */ + sdram->ctrl = CFG_SDRAM_CTRL | 2; + + /* Issue LEMR */ + sdram->mode = CFG_SDRAM_EMOD; + sdram->mode = (CFG_SDRAM_MODE | 0x04000000); + + udelay(500); + + /* Issue PALL */ + sdram->ctrl = (CFG_SDRAM_CTRL | 2); + + /* Perform two refresh cycles */ + sdram->ctrl = CFG_SDRAM_CTRL | 4; + sdram->ctrl = CFG_SDRAM_CTRL | 4; + + sdram->mode = CFG_SDRAM_MODE; + + sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + + udelay(100); + + return dramsize; +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} diff --git a/board/freescale/m5373evb/mii.c b/board/freescale/m5373evb/mii.c new file mode 100644 index 0000000..8f6abf3 --- /dev/null +++ b/board/freescale/m5373evb/mii.c @@ -0,0 +1,306 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fec.h> +#include <asm/immap.h> + +#include <config.h> +#include <net.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC; + gpio->par_feci2c |= + GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO; + } else { + gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC); + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO); + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include <miiphy.h> + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + strcpy(info->phy_name, + STR_ID_DP83848VV); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + printf(STR_ID_DP83848VV); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +void mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5373evb/nand.c b/board/freescale/m5373evb/nand.c new file mode 100644 index 0000000..344a614 --- /dev/null +++ b/board/freescale/m5373evb/nand.c @@ -0,0 +1,114 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NAND) +#include <nand.h> +#include <linux/mtd/mtd.h> + +#define SET_CLE 0x10 +#define CLR_CLE ~SET_CLE +#define SET_ALE 0x08 +#define CLR_ALE ~SET_ALE + +static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd) +{ + struct nand_chip *this = mtdinfo->priv; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + u32 nand_baseaddr = (u32) this->IO_ADDR_W; + + switch (cmd) { + case NAND_CTL_SETNCE: + case NAND_CTL_CLRNCE: + break; + case NAND_CTL_SETCLE: + nand_baseaddr |= SET_CLE; + break; + case NAND_CTL_CLRCLE: + nand_baseaddr &= CLR_CLE; + break; + case NAND_CTL_SETALE: + nand_baseaddr |= SET_ALE; + break; + case NAND_CTL_CLRALE: + nand_baseaddr |= CLR_ALE; + break; + case NAND_CTL_SETWP: + fbcs->csmr2 |= FBCS_CSMR_WP; + break; + case NAND_CTL_CLRWP: + fbcs->csmr2 &= ~FBCS_CSMR_WP; + break; + } + this->IO_ADDR_W = (void __iomem *)(nand_baseaddr); +} + +static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte) +{ + struct nand_chip *this = mtdinfo->priv; + *((volatile u8 *)(this->IO_ADDR_W)) = byte; +} + +static u8 nand_read_byte(struct mtd_info *mtdinfo) +{ + struct nand_chip *this = mtdinfo->priv; + return (u8) (*((volatile u8 *)this->IO_ADDR_R)); +} + +static int nand_dev_ready(struct mtd_info *mtdinfo) +{ + return 1; +} + +int board_nand_init(struct nand_chip *nand) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + *((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004; + + /* set up pin configuration */ + gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3; + gpio->pddr_timer |= 0x08; + gpio->ppd_timer |= 0x08; + gpio->pclrr_timer = 0; + gpio->podr_timer = 0; + + nand->chip_delay = 50; + nand->eccmode = NAND_ECC_SOFT; + nand->hwcontrol = nand_hwcontrol; + nand->read_byte = nand_read_byte; + nand->write_byte = nand_write_byte; + nand->dev_ready = nand_dev_ready; + + return 0; +} +#endif diff --git a/board/freescale/m5373evb/u-boot.lds b/board/freescale/m5373evb/u-boot.lds new file mode 100644 index 0000000..9b994a0 --- /dev/null +++ b/board/freescale/m5373evb/u-boot.lds @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf532x/start.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m547xevb/Makefile b/board/freescale/m547xevb/Makefile new file mode 100644 index 0000000..74c2528 --- /dev/null +++ b/board/freescale/m547xevb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o mii.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m547xevb/config.mk b/board/freescale/m547xevb/config.mk new file mode 100644 index 0000000..fa66b75 --- /dev/null +++ b/board/freescale/m547xevb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xFF800000 diff --git a/board/freescale/m547xevb/m547xevb.c b/board/freescale/m547xevb/m547xevb.c new file mode 100644 index 0000000..0286084 --- /dev/null +++ b/board/freescale/m547xevb/m547xevb.c @@ -0,0 +1,115 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <pci.h> +#include <asm/immap.h> + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale FireEngine 5475 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile siu_t *siu = (siu_t *) (MMAP_SIU); + volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + u32 dramsize, i; + + siu->drv = CFG_SDRAM_DRVSTRENGTH; + + dramsize = CFG_DRAMSZ * 0x100000; + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + siu->cs0cfg = (CFG_SDRAM_BASE | i); + +#ifdef CFG_DRAMSZ1 + temp = CFG_DRAMSZ1 * 0x100000; + for (i = 0x13; i < 0x20; i++) { + if (temp == (1 << i)) + break; + } + i--; + dramsize += temp; + siu->cs1cfg = ((CFG_SDRAM_BASE + temp) | i); +#endif + + sdram->cfg1 = CFG_SDRAM_CFG1; + sdram->cfg2 = CFG_SDRAM_CFG2; + + /* Issue PALL */ + sdram->ctrl = CFG_SDRAM_CTRL | 2; + + /* Issue LEMR */ + sdram->mode = CFG_SDRAM_EMOD; + sdram->mode = (CFG_SDRAM_MODE | 0x04000000); + + udelay(500); + + /* Issue PALL */ + sdram->ctrl = (CFG_SDRAM_CTRL | 2); + + /* Perform two refresh cycles */ + sdram->ctrl = CFG_SDRAM_CTRL | 4; + sdram->ctrl = CFG_SDRAM_CTRL | 4; + + sdram->mode = CFG_SDRAM_MODE; + + sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000F00; + + udelay(100); + + return dramsize; +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} + +#if defined(CONFIG_PCI) +/* + * Initialize PCI devices, report devices found. + */ +static struct pci_controller hose; +extern void pci_mcf547x_8x_init(struct pci_controller *hose); + +void pci_init_board(void) +{ + pci_mcf547x_8x_init(&hose); +} +#endif /* CONFIG_PCI */ diff --git a/board/freescale/m547xevb/mii.c b/board/freescale/m547xevb/mii.c new file mode 100644 index 0000000..5b2683b --- /dev/null +++ b/board/freescale/m547xevb/mii.c @@ -0,0 +1,322 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <net.h> + +#include <asm/immap.h> +#include <asm/fec.h> +#include <asm/fsl_mcdmafec.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + struct fec_info_dma *info = (struct fec_info_dma *)dev->priv; + + if (setclear) { + if (info->iobase == CFG_FEC0_IOBASE) + gpio->par_feci2cirq |= 0xF000; + else + gpio->par_feci2cirq |= 0x0FC0; + } else { + if (info->iobase == CFG_FEC0_IOBASE) + gpio->par_feci2cirq &= 0x0FFF; + else + gpio->par_feci2cirq &= 0xF03F; + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include <miiphy.h> + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ +#define PHY_ID_BCM5222 0x00406322 /* Broadcom 5222 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" +#define STR_ID_BCM5222 "BCM5222" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_dma *info) +{ + volatile fecdma_t *fecp = (fecdma_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_dma *info; + struct eth_device *dev; + volatile fecdma_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fecdma_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_dma *info = dev->priv; + int phyaddr, pass, temp; + uint phyno, phytype; + + if (info->phyname_init) { + return info->phy_addr; + } + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + temp = 0; + if (info->index > 0) { + /* Some phy have multiple address, to solve the issue + where phyno keeps starting from 0, check the + previous phy address if both miibase are the same. */ + if (info->miibase == (info->next)->miibase) { + temp = (info->next)->phy_addr + 1; + } + } + + for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_BCM5222: + strcpy(info->phy_name, STR_ID_BCM5222); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_BCM5222: + printf(STR_ID_BCM5222); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +void mii_init(void) __attribute__ ((weak, alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fecdma_t *fecp; + struct fec_info_dma *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fecdma_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m547xevb/u-boot.lds b/board/freescale/m547xevb/u-boot.lds new file mode 100644 index 0000000..c10472a --- /dev/null +++ b/board/freescale/m547xevb/u-boot.lds @@ -0,0 +1,143 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf547x_8x/start.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m548xevb/Makefile b/board/freescale/m548xevb/Makefile new file mode 100644 index 0000000..74c2528 --- /dev/null +++ b/board/freescale/m548xevb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o mii.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m548xevb/config.mk b/board/freescale/m548xevb/config.mk new file mode 100644 index 0000000..fa66b75 --- /dev/null +++ b/board/freescale/m548xevb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xFF800000 diff --git a/board/freescale/m548xevb/m548xevb.c b/board/freescale/m548xevb/m548xevb.c new file mode 100644 index 0000000..0372807 --- /dev/null +++ b/board/freescale/m548xevb/m548xevb.c @@ -0,0 +1,115 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <pci.h> +#include <asm/immap.h> + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale FireEngine 5485 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile siu_t *siu = (siu_t *) (MMAP_SIU); + volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + u32 dramsize, i; + + siu->drv = CFG_SDRAM_DRVSTRENGTH; + + dramsize = CFG_DRAMSZ * 0x100000; + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + siu->cs0cfg = (CFG_SDRAM_BASE | i); + +#ifdef CFG_DRAMSZ1 + temp = CFG_DRAMSZ1 * 0x100000; + for (i = 0x13; i < 0x20; i++) { + if (temp == (1 << i)) + break; + } + i--; + dramsize += temp; + siu->cs1cfg = ((CFG_SDRAM_BASE + temp) | i); +#endif + + sdram->cfg1 = CFG_SDRAM_CFG1; + sdram->cfg2 = CFG_SDRAM_CFG2; + + /* Issue PALL */ + sdram->ctrl = CFG_SDRAM_CTRL | 2; + + /* Issue LEMR */ + sdram->mode = CFG_SDRAM_EMOD; + sdram->mode = (CFG_SDRAM_MODE | 0x04000000); + + udelay(500); + + /* Issue PALL */ + sdram->ctrl = (CFG_SDRAM_CTRL | 2); + + /* Perform two refresh cycles */ + sdram->ctrl = CFG_SDRAM_CTRL | 4; + sdram->ctrl = CFG_SDRAM_CTRL | 4; + + sdram->mode = CFG_SDRAM_MODE; + + sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000F00; + + udelay(100); + + return dramsize; +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} + +#if defined(CONFIG_PCI) +/* + * Initialize PCI devices, report devices found. + */ +static struct pci_controller hose; +extern void pci_mcf547x_8x_init(struct pci_controller *hose); + +void pci_init_board(void) +{ + pci_mcf547x_8x_init(&hose); +} +#endif /* CONFIG_PCI */ diff --git a/board/freescale/m548xevb/mii.c b/board/freescale/m548xevb/mii.c new file mode 100644 index 0000000..5b2683b --- /dev/null +++ b/board/freescale/m548xevb/mii.c @@ -0,0 +1,322 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <net.h> + +#include <asm/immap.h> +#include <asm/fec.h> +#include <asm/fsl_mcdmafec.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + struct fec_info_dma *info = (struct fec_info_dma *)dev->priv; + + if (setclear) { + if (info->iobase == CFG_FEC0_IOBASE) + gpio->par_feci2cirq |= 0xF000; + else + gpio->par_feci2cirq |= 0x0FC0; + } else { + if (info->iobase == CFG_FEC0_IOBASE) + gpio->par_feci2cirq &= 0x0FFF; + else + gpio->par_feci2cirq &= 0xF03F; + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include <miiphy.h> + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ +#define PHY_ID_BCM5222 0x00406322 /* Broadcom 5222 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" +#define STR_ID_BCM5222 "BCM5222" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_dma *info) +{ + volatile fecdma_t *fecp = (fecdma_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_dma *info; + struct eth_device *dev; + volatile fecdma_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fecdma_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_dma *info = dev->priv; + int phyaddr, pass, temp; + uint phyno, phytype; + + if (info->phyname_init) { + return info->phy_addr; + } + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + temp = 0; + if (info->index > 0) { + /* Some phy have multiple address, to solve the issue + where phyno keeps starting from 0, check the + previous phy address if both miibase are the same. */ + if (info->miibase == (info->next)->miibase) { + temp = (info->next)->phy_addr + 1; + } + } + + for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_BCM5222: + strcpy(info->phy_name, STR_ID_BCM5222); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_BCM5222: + printf(STR_ID_BCM5222); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +void mii_init(void) __attribute__ ((weak, alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fecdma_t *fecp; + struct fec_info_dma *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fecdma_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m548xevb/u-boot.lds b/board/freescale/m548xevb/u-boot.lds new file mode 100644 index 0000000..c10472a --- /dev/null +++ b/board/freescale/m548xevb/u-boot.lds @@ -0,0 +1,143 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf547x_8x/start.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index 3d72eb7..9f4ac8e 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -27,6 +27,7 @@ #include <mpc83xx.h> #include <asm/mpc8349_pci.h> #include <i2c.h> +#include <spi.h> #include <spd.h> #include <miiphy.h> #if defined(CONFIG_SPD_EEPROM) @@ -251,6 +252,34 @@ void sdram_init(void) } #endif +/* + * The following are used to control the SPI chip selects for the SPI command. + */ +#ifdef CONFIG_HARD_SPI + +#define SPI_CS_MASK 0x80000000 + +void spi_eeprom_chipsel(int cs) +{ + volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0]; + + if (cs) + iopd->dat &= ~SPI_CS_MASK; + else + iopd->dat |= SPI_CS_MASK; +} + +/* + * The SPI command uses this table of functions for controlling the SPI + * chip selects. + */ +spi_chipsel_type spi_chipsel[] = { + spi_eeprom_chipsel, +}; +int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]); + +#endif /* CONFIG_HARD_SPI */ + #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/freescale/mpc8540ads/Makefile b/board/freescale/mpc8540ads/Makefile index 2913650..be24388 100644 --- a/board/freescale/mpc8540ads/Makefile +++ b/board/freescale/mpc8540ads/Makefile @@ -25,9 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o -SOBJS := init.o -#SOBJS := +COBJS := $(BOARD).o law.o tlb.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/mpc8540ads/init.S b/board/freescale/mpc8540ads/init.S deleted file mode 100644 index 74d71c6..0000000 --- a/board/freescale/mpc8540ads/init.S +++ /dev/null @@ -1,265 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * Copyright (C) 2002,2003, Motorola Inc. - * Xianghua Xiao <X.Xiao@motorola.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> -#include <asm/cache.h> -#include <asm/mmu.h> -#include <config.h> -#include <mpc85xx.h> - - -/* - * TLB0 and TLB1 Entries - * - * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR. - * However, CCSRBAR is then relocated to CFG_CCSRBAR right after - * these TLB entries are established. - * - * The TLB entries for DDR are dynamically setup in spd_sdram() - * and use TLB1 Entries 8 through 15 as needed according to the - * size of DDR memory. - * - * MAS0: tlbsel, esel, nv - * MAS1: valid, iprot, tid, ts, tsize - * MAS2: epn, x0, x1, w, i, m, g, e - * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr - */ - -#define entry_start \ - mflr r1 ; \ - bl 0f ; - -#define entry_end \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - - - .section .bootpg, "ax" - .globl tlb1_entry -tlb1_entry: - entry_start - - /* - * Number of TLB0 and TLB1 entries in the following table - */ - .long 13 - -#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR) - /* - * TLB0 4K Non-cacheable, guarded - * 0xff700000 4K Initial CCSRBAR mapping - * - * This ends up at a TLB0 Index==0 entry, and must not collide - * with other TLB0 Entries. - */ - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) -#else -#error("Update the number of table entries in tlb1_entry") -#endif - - /* - * TLB0 16K Cacheable, non-guarded - * 0xd001_0000 16K Temporary Global data for initialization - * - * Use four 4K TLB0 entries. These entries must be cacheable - * as they provide the bootstrap memory before the memory - * controler and real memory have been configured. - * - * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c, - * and must not collide with other TLB0 entries. - */ - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4*1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4*1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8*1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8*1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12*1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12*1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 0: 16M Non-cacheable, guarded - * 0xff000000 16M FLASH - * Out of reset this entry is only 4K. - */ - .long FSL_BOOKE_MAS0(1, 0, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M) - .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 1: 256M Non-cacheable, guarded - * 0x80000000 256M PCI1 MEM First half - */ - .long FSL_BOOKE_MAS0(1, 1, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 2: 256M Non-cacheable, guarded - * 0x90000000 256M PCI1 MEM Second half - */ - .long FSL_BOOKE_MAS0(1, 2, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 3: 256M Non-cacheable, guarded - * 0xc0000000 256M Rapid IO MEM First half - */ - .long FSL_BOOKE_MAS0(1, 3, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 4: 256M Non-cacheable, guarded - * 0xd0000000 256M Rapid IO MEM Second half - */ - .long FSL_BOOKE_MAS0(1, 4, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 5: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe200_0000 16M PCI1 IO - */ - .long FSL_BOOKE_MAS0(1, 5, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 6: 64M Cacheable, non-guarded - * 0xf000_0000 64M LBC SDRAM - */ - .long FSL_BOOKE_MAS0(1, 6, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0) - .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 7: 16K Non-cacheable, guarded - * 0xf8000000 16K BCSR registers - */ - .long FSL_BOOKE_MAS0(1, 7, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16K) - .long FSL_BOOKE_MAS2(CFG_BCSR, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_BCSR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - -#if !defined(CONFIG_SPD_EEPROM) - /* - * TLB 8, 9: 128M DDR - * 0x00000000 64M DDR System memory - * 0x04000000 64M DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - * Make sure the TLB count at the top of this table is correct. - * Likely it needs to be increased by two for these entries. - */ -#error("Update the number of table entries in tlb1_entry") - .long FSL_BOOKE_MAS0(1, 8, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, 0) - .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(1, 9, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE + 0x4000000, 0) - .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE + 0x4000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) -#endif - - entry_end - -/* - * LAW(Local Access Window) configuration: - * - * 0x0000_0000 0x7fff_ffff DDR 2G - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xc000_0000 0xdfff_ffff RapidIO 512M - * 0xe000_0000 0xe000_ffff CCSR 1M - * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M - * 0xf000_0000 0xf7ff_ffff SDRAM 128M - * 0xf800_0000 0xf80f_ffff BCSR 1M - * 0xff00_0000 0xffff_ffff FLASH (boot bank) 16M - * - * Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - */ - -#if !defined(CONFIG_SPD_EEPROM) -#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff) -#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) -#else -#define LAWBAR0 0 -#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN) -#endif - -#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff) -#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -/* - * This is not so much the SDRAM map as it is the whole localbus map. - */ -#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff) -#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)) - -#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff) -#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_1M)) - -/* - * Rapid IO at 0xc000_0000 for 512 M - */ -#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff) -#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)) - - - .section .bootpg, "ax" - .globl law_entry -law_entry: - entry_start - .long 0x05 - .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3 - .long LAWBAR4,LAWAR4 - entry_end diff --git a/board/freescale/mpc8540ads/law.c b/board/freescale/mpc8540ads/law.c new file mode 100644 index 0000000..785576a --- /dev/null +++ b/board/freescale/mpc8540ads/law.c @@ -0,0 +1,58 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +/* + * LAW(Local Access Window) configuration: + * + * 0x0000_0000 0x7fff_ffff DDR 2G + * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M + * 0xc000_0000 0xdfff_ffff RapidIO 512M + * 0xe000_0000 0xe000_ffff CCSR 1M + * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M + * 0xf000_0000 0xf7ff_ffff SDRAM 128M + * 0xf800_0000 0xf80f_ffff BCSR 1M + * 0xff00_0000 0xffff_ffff FLASH (boot bank) 16M + * + * Notes: + * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. + * If flash is 8M at default position (last 8M), no LAW needed. + */ + +struct law_entry law_table[] = { +#ifndef CONFIG_SPD_EEPROM + SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR), +#endif + SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + /* This is not so much the SDRAM map as it is the whole localbus map. */ + SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), + SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8540ads/tlb.c b/board/freescale/mpc8540ads/tlb.c new file mode 100644 index 0000000..3eaff01 --- /dev/null +++ b/board/freescale/mpc8540ads/tlb.c @@ -0,0 +1,130 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* + * TLB 0: 16M Non-cacheable, guarded + * 0xff000000 16M FLASH + * Out of reset this entry is only 4K. + */ + SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_16M, 1), + + /* + * TLB 1: 256M Non-cacheable, guarded + * 0x80000000 256M PCI1 MEM First half + */ + SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 2: 256M Non-cacheable, guarded + * 0x90000000 256M PCI1 MEM Second half + */ + SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 3: 256M Non-cacheable, guarded + * 0xc0000000 256M Rapid IO MEM First half + */ + SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 4: 256M Non-cacheable, guarded + * 0xd0000000 256M Rapid IO MEM Second half + */ + SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 5: 64M Non-cacheable, guarded + * 0xe000_0000 1M CCSRBAR + * 0xe200_0000 16M PCI1 IO + */ + SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_64M, 1), + + /* + * TLB 6: 64M Cacheable, non-guarded + * 0xf000_0000 64M LBC SDRAM + */ + SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 6, BOOKE_PAGESZ_64M, 1), + + /* + * TLB 7: 16K Non-cacheable, guarded + * 0xf8000000 16K BCSR registers + */ + SET_TLB_ENTRY(1, CFG_BCSR, CFG_BCSR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 7, BOOKE_PAGESZ_16K, 1), + +#if !defined(CONFIG_SPD_EEPROM) + /* + * TLB 8, 9: 128M DDR + * 0x00000000 64M DDR System memory + * 0x04000000 64M DDR System memory + * Without SPD EEPROM configured DDR, this must be setup manually. + * Make sure the TLB count at the top of this table is correct. + * Likely it needs to be increased by two for these entries. + */ +#error("Update the number of table entries in tlb1_entry") + SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 8, BOOKE_PAGESZ_64M, 1), + + SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x4000000, CFG_DDR_SDRAM_BASE + 0x4000000, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_64M, 1), +#endif +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8540ads/u-boot.lds b/board/freescale/mpc8540ads/u-boot.lds index bc0db55..86f8f13 100644 --- a/board/freescale/mpc8540ads/u-boot.lds +++ b/board/freescale/mpc8540ads/u-boot.lds @@ -35,7 +35,6 @@ SECTIONS .bootpg 0xFFFFF000 : { cpu/mpc85xx/start.o (.bootpg) - board/freescale/mpc8540ads/init.o (.bootpg) } = 0xffff /* Read-only sections, merged into text segment: */ @@ -65,7 +64,6 @@ SECTIONS .text : { cpu/mpc85xx/start.o (.text) - board/freescale/mpc8540ads/init.o (.text) cpu/mpc85xx/traps.o (.text) cpu/mpc85xx/interrupts.o (.text) cpu/mpc85xx/cpu_init.o (.text) diff --git a/board/freescale/mpc8541cds/Makefile b/board/freescale/mpc8541cds/Makefile index 7f53098..d1a585a 100644 --- a/board/freescale/mpc8541cds/Makefile +++ b/board/freescale/mpc8541cds/Makefile @@ -29,14 +29,12 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o \ +COBJS := $(BOARD).o law.o tlb.o \ ../common/cadmus.o \ ../common/eeprom.o \ ../common/ft_board.o \ ../common/via.o -SOBJS := init.o - SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/board/freescale/mpc8541cds/init.S b/board/freescale/mpc8541cds/init.S deleted file mode 100644 index 8c8c087..0000000 --- a/board/freescale/mpc8541cds/init.S +++ /dev/null @@ -1,243 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * Copyright 2002,2003, Motorola Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> -#include <asm/cache.h> -#include <asm/mmu.h> -#include <config.h> -#include <mpc85xx.h> - - -/* - * TLB0 and TLB1 Entries - * - * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR. - * However, CCSRBAR is then relocated to CFG_CCSRBAR right after - * these TLB entries are established. - * - * The TLB entries for DDR are dynamically setup in spd_sdram() - * and use TLB1 Entries 8 through 15 as needed according to the - * size of DDR memory. - * - * MAS0: tlbsel, esel, nv - * MAS1: valid, iprot, tid, ts, tsize - * MAS2: epn, x0, x1, w, i, m, g, e - * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr - */ - -#define entry_start \ - mflr r1 ; \ - bl 0f ; - -#define entry_end \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - - - .section .bootpg, "ax" - .globl tlb1_entry -tlb1_entry: - entry_start - - /* - * Number of TLB0 and TLB1 entries in the following table - */ - .long 13 - -#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR) - /* - * TLB0 4K Non-cacheable, guarded - * 0xff700000 4K Initial CCSRBAR mapping - * - * This ends up at a TLB0 Index==0 entry, and must not collide - * with other TLB0 Entries. - */ - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) -#else -#error("Update the number of table entries in tlb1_entry") -#endif - - /* - * TLB0 16K Cacheable, non-guarded - * 0xd001_0000 16K Temporary Global data for initialization - * - * Use four 4K TLB0 entries. These entries must be cacheable - * as they provide the bootstrap memory before the memory - * controler and real memory have been configured. - * - * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c, - * and must not collide with other TLB0 entries. - */ - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - - /* - * TLB 0: 16M Non-cacheable, guarded - * 0xff000000 16M FLASH - * Out of reset this entry is only 4K. - */ - .long FSL_BOOKE_MAS0(1, 0, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M) - .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 1: 256M Non-cacheable, guarded - * 0x80000000 256M PCI1 MEM First half - */ - .long FSL_BOOKE_MAS0(1, 1, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 2: 256M Non-cacheable, guarded - * 0x90000000 256M PCI1 MEM Second half - */ - .long FSL_BOOKE_MAS0(1, 2, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 3: 256M Non-cacheable, guarded - * 0xa0000000 256M PCI2 MEM First half - */ - .long FSL_BOOKE_MAS0(1, 3, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 4: 256M Non-cacheable, guarded - * 0xb0000000 256M PCI2 MEM Second half - */ - .long FSL_BOOKE_MAS0(1, 4, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 5: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe200_0000 16M PCI1 IO - * 0xe300_0000 16M PCI2 IO - */ - .long FSL_BOOKE_MAS0(1, 5, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 6: 64M Cacheable, non-guarded - * 0xf000_0000 64M LBC SDRAM - */ - .long FSL_BOOKE_MAS0(1, 6, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0) - .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 7: 1M Non-cacheable, guarded - * 0xf8000000 1M CADMUS registers - */ - .long FSL_BOOKE_MAS0(1, 7, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M) - .long FSL_BOOKE_MAS2(CADMUS_BASE_ADDR, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CADMUS_BASE_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - entry_end - -/* - * LAW(Local Access Window) configuration: - * - * 0x0000_0000 0x7fff_ffff DDR 2G - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M - * 0xe000_0000 0xe000_ffff CCSR 1M - * 0xe200_0000 0xe20f_ffff PCI1 IO 1M - * 0xe210_0000 0xe21f_ffff PCI2 IO 1M - * 0xf000_0000 0xf7ff_ffff SDRAM 128M - * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M - * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M - * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M - * - * Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - * - * The defines below are 1-off of the actual LAWAR0 usage. - * So LAWAR3 define uses the LAWAR4 register in the ECM. - */ - -#define LAWBAR0 0 -#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN) - -#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff) -#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff) -#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff) -#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M)) - -#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff) -#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M)) - -/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ -#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff) -#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)) - - .section .bootpg, "ax" - .globl law_entry - -law_entry: - entry_start - .long 6 - .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3 - .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5 - entry_end diff --git a/board/freescale/mpc8541cds/law.c b/board/freescale/mpc8541cds/law.c new file mode 100644 index 0000000..0ac223c --- /dev/null +++ b/board/freescale/mpc8541cds/law.c @@ -0,0 +1,58 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +/* + * LAW(Local Access Window) configuration: + * + * 0x0000_0000 0x7fff_ffff DDR 2G + * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M + * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M + * 0xe000_0000 0xe000_ffff CCSR 1M + * 0xe200_0000 0xe20f_ffff PCI1 IO 1M + * 0xe210_0000 0xe21f_ffff PCI2 IO 1M + * 0xf000_0000 0xf7ff_ffff SDRAM 128M + * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M + * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M + * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M + * + * Notes: + * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. + * If flash is 8M at default position (last 8M), no LAW needed. + */ + +struct law_entry law_table[] = { + SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + SET_LAW_ENTRY(3, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), + SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), + SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2), + /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ + SET_LAW_ENTRY(6, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8541cds/tlb.c b/board/freescale/mpc8541cds/tlb.c new file mode 100644 index 0000000..92f759b --- /dev/null +++ b/board/freescale/mpc8541cds/tlb.c @@ -0,0 +1,112 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* + * TLB 0: 16M Non-cacheable, guarded + * 0xff000000 16M FLASH + * Out of reset this entry is only 4K. + */ + SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_16M, 1), + + /* + * TLB 1: 256M Non-cacheable, guarded + * 0x80000000 256M PCI1 MEM First half + */ + SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 2: 256M Non-cacheable, guarded + * 0x90000000 256M PCI1 MEM Second half + */ + SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 3: 256M Non-cacheable, guarded + * 0xa0000000 256M PCI2 MEM First half + */ + SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 4: 256M Non-cacheable, guarded + * 0xb0000000 256M PCI2 MEM Second half + */ + SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS + 0x10000000, CFG_PCI2_MEM_PHYS + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 5: 64M Non-cacheable, guarded + * 0xe000_0000 1M CCSRBAR + * 0xe200_0000 16M PCI1 IO + * 0xe300_0000 16M PCI2 IO + */ + SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_64M, 1), + + /* + * TLB 6: 64M Cacheable, non-guarded + * 0xf000_0000 64M LBC SDRAM + */ + SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 6, BOOKE_PAGESZ_64M, 1), + + /* + * TLB 7: 1M Non-cacheable, guarded + * 0xf8000000 1M CADMUS registers + */ + SET_TLB_ENTRY(1, CADMUS_BASE_ADDR, CADMUS_BASE_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 7, BOOKE_PAGESZ_1M, 1), +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8541cds/u-boot.lds b/board/freescale/mpc8541cds/u-boot.lds index 1e490d0..1cbadf2 100644 --- a/board/freescale/mpc8541cds/u-boot.lds +++ b/board/freescale/mpc8541cds/u-boot.lds @@ -34,7 +34,6 @@ SECTIONS .bootpg 0xFFFFF000 : { cpu/mpc85xx/start.o (.bootpg) - board/freescale/mpc8541cds/init.o (.bootpg) } = 0xffff /* Read-only sections, merged into text segment: */ @@ -64,7 +63,6 @@ SECTIONS .text : { cpu/mpc85xx/start.o (.text) - board/freescale/mpc8541cds/init.o (.text) cpu/mpc85xx/traps.o (.text) cpu/mpc85xx/interrupts.o (.text) cpu/mpc85xx/cpu_init.o (.text) diff --git a/board/freescale/mpc8544ds/Makefile b/board/freescale/mpc8544ds/Makefile index c6f159a..53368b2 100644 --- a/board/freescale/mpc8544ds/Makefile +++ b/board/freescale/mpc8544ds/Makefile @@ -26,9 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o - -SOBJS := init.o +COBJS := $(BOARD).o law.o tlb.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/mpc8544ds/init.S b/board/freescale/mpc8544ds/init.S deleted file mode 100644 index 544dc07..0000000 --- a/board/freescale/mpc8544ds/init.S +++ /dev/null @@ -1,222 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> -#include <asm/cache.h> -#include <asm/mmu.h> -#include <config.h> -#include <mpc85xx.h> - -/* - * TLB0 and TLB1 Entries - * - * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR. - * However, CCSRBAR is then relocated to CFG_CCSRBAR right after - * these TLB entries are established. - * - * The TLB entries for DDR are dynamically setup in spd_sdram() - * and use TLB1 Entries 8 through 15 as needed according to the - * size of DDR memory. - * - * MAS0: tlbsel, esel, nv - * MAS1: valid, iprot, tid, ts, tsize - * MAS2: epn, x0, x1, w, i, m, g, e - * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr - */ - -#define entry_start \ - mflr r1 ; \ - bl 0f ; - -#define entry_end \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - - - .section .bootpg, "ax" - .globl tlb1_entry -tlb1_entry: - entry_start - - /* - * Number of TLB0 and TLB1 entries in the following table - */ - .long (2f-1f)/16 -1: - /* - * TLB0 4K Non-cacheable, guarded - * 0xff700000 4K Initial CCSRBAR mapping - * - * This ends up at a TLB0 Index==0 entry, and must not collide - * with other TLB0 Entries. - */ - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB0 16K Cacheable, guarded - * Temporary Global data for initialization - * - * Use four 4K TLB0 entries. These entries must be cacheable - * as they provide the bootstrap memory before the memory - * controler and real memory have been configured. - * - * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c, - * and must not collide with other TLB0 entries. - */ - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, (MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, (MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, (MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, (MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - - /* - * TLB 0: 64M Non-cacheable, guarded - * 0xfc000000 64M Covers FLASH at 0xFE800000 and 0xFF800000 - * Out of reset this entry is only 4K. - */ - .long FSL_BOOKE_MAS0(1, 0, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_BOOT_BLOCK, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_BOOT_BLOCK, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 1: 1G Non-cacheable, guarded - * 0x80000000 1G PCIE 8,9,a,b - */ - .long FSL_BOOKE_MAS0(1, 1, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G) - .long FSL_BOOKE_MAS2(CFG_PCIE_PHYS, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCIE_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 2: 256M Non-cacheable, guarded - */ - .long FSL_BOOKE_MAS0(1, 2, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI_PHYS, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 3: 256M Non-cacheable, guarded - */ - .long FSL_BOOKE_MAS0(1, 3, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI_PHYS + 0x10000000, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI_PHYS + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 4: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe100_0000 255M PCI IO range - */ - .long FSL_BOOKE_MAS0(1, 4, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - -#ifdef CFG_LBC_CACHE_BASE - /* - * TLB 5: 64M Cacheable, non-guarded - */ - .long FSL_BOOKE_MAS0(1, 5, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_LBC_CACHE_BASE, 0) - .long FSL_BOOKE_MAS3(CFG_LBC_CACHE_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) -#endif - /* - * TLB 6: 64M Non-cacheable, guarded - * 0xf8000000 64M PIXIS 0xF8000000 - 0xFBFFFFFF - */ - .long FSL_BOOKE_MAS0(1, 6, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_LBC_NONCACHE_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_LBC_NONCACHE_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) -2: - entry_end - -/* - * LAW(Local Access Window) configuration: - * - * - * Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - * - * LAW 0 is reserved for boot mapping - */ - - .section .bootpg, "ax" - .globl law_entry -law_entry: - entry_start - - .long (4f-3f)/8 -3: - .long 0 - .long (LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN - - .long (CFG_PCI1_MEM_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M) - - .long (CFG_PCI1_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_64K) - - .long (CFG_LBC_CACHE_BASE>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M) - - .long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_256M) - - .long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_64K) - - .long (CFG_PCIE2_MEM_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_512M) - - .long (CFG_PCIE2_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_64K) - - /* contains both PCIE3 MEM & IO space */ - .long (CFG_PCIE3_MEM_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_4M) -4: - entry_end diff --git a/board/freescale/mpc8544ds/law.c b/board/freescale/mpc8544ds/law.c new file mode 100644 index 0000000..433e509 --- /dev/null +++ b/board/freescale/mpc8544ds/law.c @@ -0,0 +1,42 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI), + SET_LAW_ENTRY(4, CFG_LBC_CACHE_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW_ENTRY(5, CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1), + SET_LAW_ENTRY(6, CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), + SET_LAW_ENTRY(7, CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2), + SET_LAW_ENTRY(8, CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), + /* contains both PCIE3 MEM & IO space */ + SET_LAW_ENTRY(9, CFG_PCIE3_MEM_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_PCIE_3), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8544ds/tlb.c b/board/freescale/mpc8544ds/tlb.c new file mode 100644 index 0000000..34cfb38 --- /dev/null +++ b/board/freescale/mpc8544ds/tlb.c @@ -0,0 +1,99 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + /* + * TLB 0: 64M Non-cacheable, guarded + * 0xfc000000 64M Covers FLASH at 0xFE800000 and 0xFF800000 + * Out of reset this entry is only 4K. + */ + SET_TLB_ENTRY(1, CFG_BOOT_BLOCK, CFG_BOOT_BLOCK, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_64M, 1), + /* + * TLB 1: 1G Non-cacheable, guarded + * 0x80000000 1G PCIE 8,9,a,b + */ + SET_TLB_ENTRY(1, CFG_PCIE_PHYS, CFG_PCIE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1G, 1), + + /* + * TLB 2: 256M Non-cacheable, guarded + */ + SET_TLB_ENTRY(1, CFG_PCI_PHYS, CFG_PCI_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 3: 256M Non-cacheable, guarded + */ + SET_TLB_ENTRY(1, CFG_PCI_PHYS + 0x10000000, CFG_PCI_PHYS + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 4: 64M Non-cacheable, guarded + * 0xe000_0000 1M CCSRBAR + * 0xe100_0000 255M PCI IO range + */ + SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_64M, 1), + +#ifdef CFG_LBC_CACHE_BASE + /* + * TLB 5: 64M Cacheable, non-guarded + */ + SET_TLB_ENTRY(1, CFG_LBC_CACHE_BASE, CFG_LBC_CACHE_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 5, BOOKE_PAGESZ_64M, 1), +#endif + /* + * TLB 6: 64M Non-cacheable, guarded + * 0xf8000000 64M PIXIS 0xF8000000 - 0xFBFFFFFF + */ + SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_64M, 1), +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8544ds/u-boot.lds b/board/freescale/mpc8544ds/u-boot.lds index 66bd4b6..17db8c0 100644 --- a/board/freescale/mpc8544ds/u-boot.lds +++ b/board/freescale/mpc8544ds/u-boot.lds @@ -34,7 +34,6 @@ SECTIONS .bootpg 0xFFFFF000 : { cpu/mpc85xx/start.o (.bootpg) - board/freescale/mpc8544ds/init.o (.bootpg) } = 0xffff /* Read-only sections, merged into text segment: */ @@ -64,7 +63,6 @@ SECTIONS .text : { cpu/mpc85xx/start.o (.text) - board/freescale/mpc8544ds/init.o (.text) cpu/mpc85xx/traps.o (.text) cpu/mpc85xx/interrupts.o (.text) cpu/mpc85xx/cpu_init.o (.text) diff --git a/board/freescale/mpc8548cds/Makefile b/board/freescale/mpc8548cds/Makefile index 7f53098..d1a585a 100644 --- a/board/freescale/mpc8548cds/Makefile +++ b/board/freescale/mpc8548cds/Makefile @@ -29,14 +29,12 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o \ +COBJS := $(BOARD).o law.o tlb.o \ ../common/cadmus.o \ ../common/eeprom.o \ ../common/ft_board.o \ ../common/via.o -SOBJS := init.o - SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/board/freescale/mpc8548cds/init.S b/board/freescale/mpc8548cds/init.S deleted file mode 100644 index ed0fc44..0000000 --- a/board/freescale/mpc8548cds/init.S +++ /dev/null @@ -1,252 +0,0 @@ -/* - * Copyright 2004, 2007 Freescale Semiconductor. - * Copyright 2002,2003, Motorola Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> -#include <asm/cache.h> -#include <asm/mmu.h> -#include <config.h> -#include <mpc85xx.h> - -/* - * TLB0 and TLB1 Entries - * - * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR. - * However, CCSRBAR is then relocated to CFG_CCSRBAR right after - * these TLB entries are established. - * - * The TLB entries for DDR are dynamically setup in spd_sdram() - * and use TLB1 Entries 8 through 15 as needed according to the - * size of DDR memory. - * - * MAS0: tlbsel, esel, nv - * MAS1: valid, iprot, tid, ts, tsize - * MAS2: epn, x0, x1, w, i, m, g, e - * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr - */ - -#define entry_start \ - mflr r1 ; \ - bl 0f ; - -#define entry_end \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - - - .section .bootpg, "ax" - .globl tlb1_entry -tlb1_entry: - entry_start - - /* - * Number of TLB0 and TLB1 entries in the following table - */ - .long (2f-1f)/16 - -1: -#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR) - /* - * TLB0 4K Non-cacheable, guarded - * 0xff700000 4K Initial CCSRBAR mapping - * - * This ends up at a TLB0 Index==0 entry, and must not collide - * with other TLB0 Entries. - */ - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) -#else -#error("Update the number of table entries in tlb1_entry") -#endif - - /* - * TLB0 16K Cacheable, guarded - * Temporary Global data for initialization - * - * Use four 4K TLB0 entries. These entries must be cacheable - * as they provide the bootstrap memory before the memory - * controler and real memory have been configured. - * - * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c, - * and must not collide with other TLB0 entries. - */ - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, (MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, (MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, (MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, (MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - - /* - * TLB 0: 16M Non-cacheable, guarded - * 0xff000000 16M FLASH - * Out of reset this entry is only 4K. - */ - .long FSL_BOOKE_MAS0(1, 0, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M) - .long FSL_BOOKE_MAS2(CFG_BOOT_BLOCK, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_BOOT_BLOCK, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 1: 1G Non-cacheable, guarded - * 0x80000000 1G PCI1/PCIE 8,9,a,b - */ - .long FSL_BOOKE_MAS0(1, 1, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G) - .long FSL_BOOKE_MAS2(CFG_PCI_PHYS, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - -#ifdef CFG_RIO_MEM_PHYS - /* - * TLB 2: 256M Non-cacheable, guarded - */ - .long FSL_BOOKE_MAS0(1, 2, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_RIO_MEM_PHYS, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_RIO_MEM_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 3: 256M Non-cacheable, guarded - */ - .long FSL_BOOKE_MAS0(1, 3, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_RIO_MEM_PHYS + 0x10000000, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_RIO_MEM_PHYS + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) -#endif - /* - * TLB 5: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe200_0000 1M PCI1 IO - * 0xe210_0000 1M PCI2 IO - * 0xe300_0000 1M PCIe IO - */ - .long FSL_BOOKE_MAS0(1, 5, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 6: 64M Cacheable, non-guarded - * 0xf000_0000 64M LBC SDRAM - */ - .long FSL_BOOKE_MAS0(1, 6, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_LBC_CACHE_BASE, 0) - .long FSL_BOOKE_MAS3(CFG_LBC_CACHE_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 7: 64M Non-cacheable, guarded - * 0xf8000000 64M CADMUS registers, relocated L2SRAM - */ - .long FSL_BOOKE_MAS0(1, 7, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_LBC_NONCACHE_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_LBC_NONCACHE_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - -2: - entry_end - -/* - * LAW(Local Access Window) configuration: - * - * 0x0000_0000 0x7fff_ffff DDR 2G - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xa000_0000 0xbfff_ffff PCIe MEM 512M - * 0xc000_0000 0xdfff_ffff RapidIO 512M - * 0xe000_0000 0xe000_ffff CCSR 1M - * 0xe200_0000 0xe10f_ffff PCI1 IO 1M - * 0xe280_0000 0xe20f_ffff PCI2 IO 1M - * 0xe300_0000 0xe30f_ffff PCIe IO 1M - * 0xf000_0000 0xf3ff_ffff SDRAM 64M - * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M - * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M - * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M - * - * Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - * - * LAW 0 is reserved for boot mapping - */ - - .section .bootpg, "ax" - .globl law_entry -law_entry: - entry_start - - .long (4f-3f)/8 -3: - .long 0 - .long (LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN - -#ifdef CFG_PCI1_MEM_PHYS - .long (CFG_PCI1_MEM_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M) - - .long (CFG_PCI1_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M) -#endif - -#ifdef CFG_PCI2_MEM_PHYS - .long (CFG_PCI2_MEM_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M) - - .long (CFG_PCI2_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M) -#endif - -#ifdef CFG_PCIE1_MEM_PHYS - .long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_512M) - - .long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_1M) -#endif - - /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ - .long (CFG_LBC_CACHE_BASE>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M) - -#ifdef CFG_RIO_MEM_PHYS - .long (CFG_RIO_MEM_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M) -#endif -4: - entry_end diff --git a/board/freescale/mpc8548cds/law.c b/board/freescale/mpc8548cds/law.c new file mode 100644 index 0000000..0ee53e2 --- /dev/null +++ b/board/freescale/mpc8548cds/law.c @@ -0,0 +1,73 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +/* + * LAW(Local Access Window) configuration: + * + * 0x0000_0000 0x7fff_ffff DDR 2G + * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M + * 0xa000_0000 0xbfff_ffff PCIe MEM 512M + * 0xc000_0000 0xdfff_ffff RapidIO 512M + * 0xe000_0000 0xe000_ffff CCSR 1M + * 0xe200_0000 0xe10f_ffff PCI1 IO 1M + * 0xe280_0000 0xe20f_ffff PCI2 IO 1M + * 0xe300_0000 0xe30f_ffff PCIe IO 1M + * 0xf000_0000 0xf3ff_ffff SDRAM 64M + * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M + * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M + * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M + * + * Notes: + * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. + * If flash is 8M at default position (last 8M), no LAW needed. + * + * LAW 0 is reserved for boot mapping + */ + +struct law_entry law_table[] = { +#ifdef CFG_PCI1_MEM_PHYS + SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), +#endif +#ifdef CFG_PCI2_MEM_PHYS + SET_LAW_ENTRY(4, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), + SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2), +#endif +#ifdef CFG_PCIE1_MEM_PHYS + SET_LAW_ENTRY(6, CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), + SET_LAW_ENTRY(7, CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1), +#endif + /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ + SET_LAW_ENTRY(8, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), +#ifdef CFG_RIO_MEM_PHYS + SET_LAW_ENTRY(9, CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8548cds/tlb.c b/board/freescale/mpc8548cds/tlb.c new file mode 100644 index 0000000..b21f71b --- /dev/null +++ b/board/freescale/mpc8548cds/tlb.c @@ -0,0 +1,104 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* + * TLB 0: 16M Non-cacheable, guarded + * 0xff000000 16M FLASH + * Out of reset this entry is only 4K. + */ + SET_TLB_ENTRY(1, CFG_BOOT_BLOCK, CFG_BOOT_BLOCK, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_16M, 1), + + /* + * TLB 1: 1G Non-cacheable, guarded + * 0x80000000 1G PCI1/PCIE 8,9,a,b + */ + SET_TLB_ENTRY(1, CFG_PCI_PHYS, CFG_PCI_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1G, 1), + +#ifdef CFG_RIO_MEM_PHYS + /* + * TLB 2: 256M Non-cacheable, guarded + */ + SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 3: 256M Non-cacheable, guarded + */ + SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_256M, 1), +#endif + /* + * TLB 5: 64M Non-cacheable, guarded + * 0xe000_0000 1M CCSRBAR + * 0xe200_0000 1M PCI1 IO + * 0xe210_0000 1M PCI2 IO + * 0xe300_0000 1M PCIe IO + */ + SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_64M, 1), + + /* + * TLB 6: 64M Cacheable, non-guarded + * 0xf000_0000 64M LBC SDRAM + */ + SET_TLB_ENTRY(1, CFG_LBC_CACHE_BASE, CFG_LBC_CACHE_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 6, BOOKE_PAGESZ_64M, 1), + + /* + * TLB 7: 64M Non-cacheable, guarded + * 0xf8000000 64M CADMUS registers, relocated L2SRAM + */ + SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 7, BOOKE_PAGESZ_64M, 1), +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8548cds/u-boot.lds b/board/freescale/mpc8548cds/u-boot.lds index acf25e3..d701096 100644 --- a/board/freescale/mpc8548cds/u-boot.lds +++ b/board/freescale/mpc8548cds/u-boot.lds @@ -34,7 +34,6 @@ SECTIONS .bootpg 0xFFFFF000 : { cpu/mpc85xx/start.o (.bootpg) - board/freescale/mpc8548cds/init.o (.bootpg) } = 0xffff /* Read-only sections, merged into text segment: */ @@ -64,7 +63,6 @@ SECTIONS .text : { cpu/mpc85xx/start.o (.text) - board/freescale/mpc8548cds/init.o (.text) cpu/mpc85xx/traps.o (.text) cpu/mpc85xx/interrupts.o (.text) cpu/mpc85xx/cpu_init.o (.text) diff --git a/board/freescale/mpc8555cds/Makefile b/board/freescale/mpc8555cds/Makefile index 7f53098..d1a585a 100644 --- a/board/freescale/mpc8555cds/Makefile +++ b/board/freescale/mpc8555cds/Makefile @@ -29,14 +29,12 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o \ +COBJS := $(BOARD).o law.o tlb.o \ ../common/cadmus.o \ ../common/eeprom.o \ ../common/ft_board.o \ ../common/via.o -SOBJS := init.o - SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/board/freescale/mpc8555cds/init.S b/board/freescale/mpc8555cds/init.S deleted file mode 100644 index 8c8c087..0000000 --- a/board/freescale/mpc8555cds/init.S +++ /dev/null @@ -1,243 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * Copyright 2002,2003, Motorola Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> -#include <asm/cache.h> -#include <asm/mmu.h> -#include <config.h> -#include <mpc85xx.h> - - -/* - * TLB0 and TLB1 Entries - * - * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR. - * However, CCSRBAR is then relocated to CFG_CCSRBAR right after - * these TLB entries are established. - * - * The TLB entries for DDR are dynamically setup in spd_sdram() - * and use TLB1 Entries 8 through 15 as needed according to the - * size of DDR memory. - * - * MAS0: tlbsel, esel, nv - * MAS1: valid, iprot, tid, ts, tsize - * MAS2: epn, x0, x1, w, i, m, g, e - * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr - */ - -#define entry_start \ - mflr r1 ; \ - bl 0f ; - -#define entry_end \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - - - .section .bootpg, "ax" - .globl tlb1_entry -tlb1_entry: - entry_start - - /* - * Number of TLB0 and TLB1 entries in the following table - */ - .long 13 - -#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR) - /* - * TLB0 4K Non-cacheable, guarded - * 0xff700000 4K Initial CCSRBAR mapping - * - * This ends up at a TLB0 Index==0 entry, and must not collide - * with other TLB0 Entries. - */ - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) -#else -#error("Update the number of table entries in tlb1_entry") -#endif - - /* - * TLB0 16K Cacheable, non-guarded - * 0xd001_0000 16K Temporary Global data for initialization - * - * Use four 4K TLB0 entries. These entries must be cacheable - * as they provide the bootstrap memory before the memory - * controler and real memory have been configured. - * - * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c, - * and must not collide with other TLB0 entries. - */ - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - - /* - * TLB 0: 16M Non-cacheable, guarded - * 0xff000000 16M FLASH - * Out of reset this entry is only 4K. - */ - .long FSL_BOOKE_MAS0(1, 0, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M) - .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 1: 256M Non-cacheable, guarded - * 0x80000000 256M PCI1 MEM First half - */ - .long FSL_BOOKE_MAS0(1, 1, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 2: 256M Non-cacheable, guarded - * 0x90000000 256M PCI1 MEM Second half - */ - .long FSL_BOOKE_MAS0(1, 2, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 3: 256M Non-cacheable, guarded - * 0xa0000000 256M PCI2 MEM First half - */ - .long FSL_BOOKE_MAS0(1, 3, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 4: 256M Non-cacheable, guarded - * 0xb0000000 256M PCI2 MEM Second half - */ - .long FSL_BOOKE_MAS0(1, 4, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 5: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe200_0000 16M PCI1 IO - * 0xe300_0000 16M PCI2 IO - */ - .long FSL_BOOKE_MAS0(1, 5, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 6: 64M Cacheable, non-guarded - * 0xf000_0000 64M LBC SDRAM - */ - .long FSL_BOOKE_MAS0(1, 6, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0) - .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 7: 1M Non-cacheable, guarded - * 0xf8000000 1M CADMUS registers - */ - .long FSL_BOOKE_MAS0(1, 7, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M) - .long FSL_BOOKE_MAS2(CADMUS_BASE_ADDR, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CADMUS_BASE_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - entry_end - -/* - * LAW(Local Access Window) configuration: - * - * 0x0000_0000 0x7fff_ffff DDR 2G - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M - * 0xe000_0000 0xe000_ffff CCSR 1M - * 0xe200_0000 0xe20f_ffff PCI1 IO 1M - * 0xe210_0000 0xe21f_ffff PCI2 IO 1M - * 0xf000_0000 0xf7ff_ffff SDRAM 128M - * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M - * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M - * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M - * - * Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - * - * The defines below are 1-off of the actual LAWAR0 usage. - * So LAWAR3 define uses the LAWAR4 register in the ECM. - */ - -#define LAWBAR0 0 -#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN) - -#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff) -#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff) -#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff) -#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M)) - -#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff) -#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M)) - -/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ -#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff) -#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)) - - .section .bootpg, "ax" - .globl law_entry - -law_entry: - entry_start - .long 6 - .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3 - .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5 - entry_end diff --git a/board/freescale/mpc8555cds/law.c b/board/freescale/mpc8555cds/law.c new file mode 100644 index 0000000..0ac223c --- /dev/null +++ b/board/freescale/mpc8555cds/law.c @@ -0,0 +1,58 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +/* + * LAW(Local Access Window) configuration: + * + * 0x0000_0000 0x7fff_ffff DDR 2G + * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M + * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M + * 0xe000_0000 0xe000_ffff CCSR 1M + * 0xe200_0000 0xe20f_ffff PCI1 IO 1M + * 0xe210_0000 0xe21f_ffff PCI2 IO 1M + * 0xf000_0000 0xf7ff_ffff SDRAM 128M + * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M + * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M + * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M + * + * Notes: + * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. + * If flash is 8M at default position (last 8M), no LAW needed. + */ + +struct law_entry law_table[] = { + SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + SET_LAW_ENTRY(3, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), + SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), + SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2), + /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ + SET_LAW_ENTRY(6, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8555cds/tlb.c b/board/freescale/mpc8555cds/tlb.c new file mode 100644 index 0000000..92f759b --- /dev/null +++ b/board/freescale/mpc8555cds/tlb.c @@ -0,0 +1,112 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* + * TLB 0: 16M Non-cacheable, guarded + * 0xff000000 16M FLASH + * Out of reset this entry is only 4K. + */ + SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_16M, 1), + + /* + * TLB 1: 256M Non-cacheable, guarded + * 0x80000000 256M PCI1 MEM First half + */ + SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 2: 256M Non-cacheable, guarded + * 0x90000000 256M PCI1 MEM Second half + */ + SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 3: 256M Non-cacheable, guarded + * 0xa0000000 256M PCI2 MEM First half + */ + SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 4: 256M Non-cacheable, guarded + * 0xb0000000 256M PCI2 MEM Second half + */ + SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS + 0x10000000, CFG_PCI2_MEM_PHYS + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 5: 64M Non-cacheable, guarded + * 0xe000_0000 1M CCSRBAR + * 0xe200_0000 16M PCI1 IO + * 0xe300_0000 16M PCI2 IO + */ + SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_64M, 1), + + /* + * TLB 6: 64M Cacheable, non-guarded + * 0xf000_0000 64M LBC SDRAM + */ + SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 6, BOOKE_PAGESZ_64M, 1), + + /* + * TLB 7: 1M Non-cacheable, guarded + * 0xf8000000 1M CADMUS registers + */ + SET_TLB_ENTRY(1, CADMUS_BASE_ADDR, CADMUS_BASE_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 7, BOOKE_PAGESZ_1M, 1), +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8555cds/u-boot.lds b/board/freescale/mpc8555cds/u-boot.lds index e9fa51e..1cbadf2 100644 --- a/board/freescale/mpc8555cds/u-boot.lds +++ b/board/freescale/mpc8555cds/u-boot.lds @@ -34,7 +34,6 @@ SECTIONS .bootpg 0xFFFFF000 : { cpu/mpc85xx/start.o (.bootpg) - board/freescale/mpc8555cds/init.o (.bootpg) } = 0xffff /* Read-only sections, merged into text segment: */ @@ -64,7 +63,6 @@ SECTIONS .text : { cpu/mpc85xx/start.o (.text) - board/freescale/mpc8555cds/init.o (.text) cpu/mpc85xx/traps.o (.text) cpu/mpc85xx/interrupts.o (.text) cpu/mpc85xx/cpu_init.o (.text) diff --git a/board/freescale/mpc8560ads/Makefile b/board/freescale/mpc8560ads/Makefile index 2913650..be24388 100644 --- a/board/freescale/mpc8560ads/Makefile +++ b/board/freescale/mpc8560ads/Makefile @@ -25,9 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o -SOBJS := init.o -#SOBJS := +COBJS := $(BOARD).o law.o tlb.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/mpc8560ads/init.S b/board/freescale/mpc8560ads/init.S deleted file mode 100644 index 37fd0c6..0000000 --- a/board/freescale/mpc8560ads/init.S +++ /dev/null @@ -1,266 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * Copyright (C) 2002,2003, Motorola Inc. - * Xianghua Xiao <X.Xiao@motorola.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> -#include <asm/cache.h> -#include <asm/mmu.h> -#include <config.h> -#include <mpc85xx.h> - - -/* - * TLB0 and TLB1 Entries - * - * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR. - * However, CCSRBAR is then relocated to CFG_CCSRBAR right after - * these TLB entries are established. - * - * The TLB entries for DDR are dynamically setup in spd_sdram() - * and use TLB1 Entries 8 through 15 as needed according to the - * size of DDR memory. - * - * MAS0: tlbsel, esel, nv - * MAS1: valid, iprot, tid, ts, tsize - * MAS2: epn, x0, x1, w, i, m, g, e - * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr - */ - -#define entry_start \ - mflr r1 ; \ - bl 0f ; - -#define entry_end \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - - - .section .bootpg, "ax" - .globl tlb1_entry -tlb1_entry: - entry_start - - /* - * Number of TLB0 and TLB1 entries in the following table - */ - .long 13 - -#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR) - /* - * TLB0 4K Non-cacheable, guarded - * 0xff700000 4K Initial CCSRBAR mapping - * - * This ends up at a TLB0 Index==0 entry, and must not collide - * with other TLB0 Entries. - */ - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) -#else -#error("Update the number of table entries in tlb1_entry") -#endif - - /* - * TLB0 16K Cacheable, non-guarded - * 0xd001_0000 16K Temporary Global data for initialization - * - * Use four 4K TLB0 entries. These entries must be cacheable - * as they provide the bootstrap memory before the memory - * controler and real memory have been configured. - * - * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c, - * and must not collide with other TLB0 entries. - */ - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - - /* - * TLB 0: 16M Non-cacheable, guarded - * 0xff000000 16M FLASH - * Out of reset this entry is only 4K. - */ - .long FSL_BOOKE_MAS0(1, 0, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M) - .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 1: 256M Non-cacheable, guarded - * 0x80000000 256M PCI1 MEM First half - */ - .long FSL_BOOKE_MAS0(1, 1, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 2: 256M Non-cacheable, guarded - * 0x90000000 256M PCI1 MEM Second half - */ - .long FSL_BOOKE_MAS0(1, 2, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 3: 256M Non-cacheable, guarded - * 0xc0000000 256M Rapid IO MEM First half - */ - .long FSL_BOOKE_MAS0(1, 3, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 4: 256M Non-cacheable, guarded - * 0xd0000000 256M Rapid IO MEM Second half - */ - .long FSL_BOOKE_MAS0(1, 4, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 5: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe200_0000 16M PCI1 IO - */ - .long FSL_BOOKE_MAS0(1, 5, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 6: 64M Cacheable, non-guarded - * 0xf000_0000 64M LBC SDRAM - */ - .long FSL_BOOKE_MAS0(1, 6, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0) - .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 7: 16K Non-cacheable, guarded - * 0xf8000000 16K BCSR registers - */ - .long FSL_BOOKE_MAS0(1, 7, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16K) - .long FSL_BOOKE_MAS2(CFG_BCSR, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_BCSR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - -#if !defined(CONFIG_SPD_EEPROM) - /* - * TLB 8, 9: 128M DDR - * 0x00000000 64M DDR System memory - * 0x04000000 64M DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - * Make sure the TLB count at the top of this table is correct. - * Likely it needs to be increased by two for these entries. - */ -#error("Update the number of table entries in tlb1_entry") - .long FSL_BOOKE_MAS0(1, 8, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, 0) - .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(1, 9, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE + 0x4000000, 0) - .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE + 0x4000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) -#endif - - entry_end - -/* - * LAW(Local Access Window) configuration: - * - * 0x0000_0000 0x7fff_ffff DDR 2G - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xc000_0000 0xdfff_ffff RapidIO 512M - * 0xe000_0000 0xe000_ffff CCSR 1M - * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M - * 0xf000_0000 0xf7ff_ffff SDRAM 128M - * 0xf800_0000 0xf80f_ffff BCSR 1M - * 0xff00_0000 0xffff_ffff FLASH (boot bank) 16M - * - * Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - */ - -#if !defined(CONFIG_SPD_EEPROM) -#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff) -#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) -#else -#define LAWBAR0 0 -#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN) -#endif - -#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff) -#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -/* - * This is not so much the SDRAM map as it is the whole localbus map. - */ -#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff) -#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)) - -#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff) -#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_1M)) - -/* - * Rapid IO at 0xc000_0000 for 512 M - */ -#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff) -#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)) - - - .section .bootpg, "ax" - .globl law_entry -law_entry: - entry_start - .long 0x05 - .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3 - .long LAWBAR4,LAWAR4 - entry_end diff --git a/board/freescale/mpc8560ads/law.c b/board/freescale/mpc8560ads/law.c new file mode 100644 index 0000000..785576a --- /dev/null +++ b/board/freescale/mpc8560ads/law.c @@ -0,0 +1,58 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +/* + * LAW(Local Access Window) configuration: + * + * 0x0000_0000 0x7fff_ffff DDR 2G + * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M + * 0xc000_0000 0xdfff_ffff RapidIO 512M + * 0xe000_0000 0xe000_ffff CCSR 1M + * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M + * 0xf000_0000 0xf7ff_ffff SDRAM 128M + * 0xf800_0000 0xf80f_ffff BCSR 1M + * 0xff00_0000 0xffff_ffff FLASH (boot bank) 16M + * + * Notes: + * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. + * If flash is 8M at default position (last 8M), no LAW needed. + */ + +struct law_entry law_table[] = { +#ifndef CONFIG_SPD_EEPROM + SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR), +#endif + SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + /* This is not so much the SDRAM map as it is the whole localbus map. */ + SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), + SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8560ads/tlb.c b/board/freescale/mpc8560ads/tlb.c new file mode 100644 index 0000000..3eaff01 --- /dev/null +++ b/board/freescale/mpc8560ads/tlb.c @@ -0,0 +1,130 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* + * TLB 0: 16M Non-cacheable, guarded + * 0xff000000 16M FLASH + * Out of reset this entry is only 4K. + */ + SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_16M, 1), + + /* + * TLB 1: 256M Non-cacheable, guarded + * 0x80000000 256M PCI1 MEM First half + */ + SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 2: 256M Non-cacheable, guarded + * 0x90000000 256M PCI1 MEM Second half + */ + SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 3: 256M Non-cacheable, guarded + * 0xc0000000 256M Rapid IO MEM First half + */ + SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 4: 256M Non-cacheable, guarded + * 0xd0000000 256M Rapid IO MEM Second half + */ + SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 5: 64M Non-cacheable, guarded + * 0xe000_0000 1M CCSRBAR + * 0xe200_0000 16M PCI1 IO + */ + SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_64M, 1), + + /* + * TLB 6: 64M Cacheable, non-guarded + * 0xf000_0000 64M LBC SDRAM + */ + SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 6, BOOKE_PAGESZ_64M, 1), + + /* + * TLB 7: 16K Non-cacheable, guarded + * 0xf8000000 16K BCSR registers + */ + SET_TLB_ENTRY(1, CFG_BCSR, CFG_BCSR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 7, BOOKE_PAGESZ_16K, 1), + +#if !defined(CONFIG_SPD_EEPROM) + /* + * TLB 8, 9: 128M DDR + * 0x00000000 64M DDR System memory + * 0x04000000 64M DDR System memory + * Without SPD EEPROM configured DDR, this must be setup manually. + * Make sure the TLB count at the top of this table is correct. + * Likely it needs to be increased by two for these entries. + */ +#error("Update the number of table entries in tlb1_entry") + SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 8, BOOKE_PAGESZ_64M, 1), + + SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x4000000, CFG_DDR_SDRAM_BASE + 0x4000000, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_64M, 1), +#endif +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8560ads/u-boot.lds b/board/freescale/mpc8560ads/u-boot.lds index 96af2b1..e2474e5 100644 --- a/board/freescale/mpc8560ads/u-boot.lds +++ b/board/freescale/mpc8560ads/u-boot.lds @@ -35,7 +35,6 @@ SECTIONS .bootpg 0xFFFFF000 : { cpu/mpc85xx/start.o (.bootpg) - board/freescale/mpc8560ads/init.o (.bootpg) } = 0xffff /* Read-only sections, merged into text segment: */ @@ -65,7 +64,6 @@ SECTIONS .text : { cpu/mpc85xx/start.o (.text) - board/freescale/mpc8560ads/init.o (.text) cpu/mpc85xx/commproc.o (.text) cpu/mpc85xx/traps.o (.text) cpu/mpc85xx/interrupts.o (.text) diff --git a/board/freescale/mpc8568mds/Makefile b/board/freescale/mpc8568mds/Makefile index 643fbc0..d9f20f9 100644 --- a/board/freescale/mpc8568mds/Makefile +++ b/board/freescale/mpc8568mds/Makefile @@ -29,9 +29,7 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o bcsr.o - -SOBJS := init.o +COBJS := $(BOARD).o bcsr.o law.o tlb.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/mpc8568mds/init.S b/board/freescale/mpc8568mds/init.S deleted file mode 100644 index 2748c51..0000000 --- a/board/freescale/mpc8568mds/init.S +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor. - * Copyright 2002,2003, Motorola Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> -#include <asm/cache.h> -#include <asm/mmu.h> -#include <config.h> -#include <mpc85xx.h> - -/* - * TLB0 and TLB1 Entries - * - * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR. - * However, CCSRBAR is then relocated to CFG_CCSRBAR right after - * these TLB entries are established. - * - * The TLB entries for DDR are dynamically setup in spd_sdram() - * and use TLB1 Entries 8 through 15 as needed according to the - * size of DDR memory. - * - * MAS0: tlbsel, esel, nv - * MAS1: valid, iprot, tid, ts, tsize - * MAS2: epn, x0, x1, w, i, m, g, e - * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr - */ -#define entry_start \ - mflr r1 ; \ - bl 0f ; - -#define entry_end \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - - - .section .bootpg, "ax" - .globl tlb1_entry -tlb1_entry: - entry_start - - /* - * Number of TLB0 and TLB1 entries in the following table - */ - .long (2f-1f)/16 - -1: -#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR) - /* - * TLB0 4K Non-cacheable, guarded - * 0xff700000 4K Initial CCSRBAR mapping - * - * This ends up at a TLB0 Index==0 entry, and must not collide - * with other TLB0 Entries. - */ - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) -#else -#error("Update the number of table entries in tlb1_entry") -#endif - - /* - * TLB0 16K Cacheable, non-guarded - * 0xd001_0000 16K Temporary Global data for initialization - * - * Use four 4K TLB0 entries. These entries must be cacheable - * as they provide the bootstrap memory before the memory - * controler and real memory have been configured. - * - * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c, - * and must not collide with other TLB0 entries. - */ - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* TLB 1 Initializations */ - /* - * TLBe 0: 16M Non-cacheable, guarded - * 0xff000000 16M FLASH (upper half) - * Out of reset this entry is only 4K. - */ - .long FSL_BOOKE_MAS0(1, 0, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M) - .long FSL_BOOKE_MAS2(CFG_FLASH_BASE + 0x1000000, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_FLASH_BASE + 0x1000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLBe 1: 16M Non-cacheable, guarded - * 0xfe000000 16M FLASH (lower half) - */ - .long FSL_BOOKE_MAS0(1, 1, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M) - .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLBe 2: 1G Non-cacheable, guarded - * 0x80000000 512M PCI1 MEM - * 0xa0000000 512M PCIe MEM - */ - .long FSL_BOOKE_MAS0(1, 2, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G) - .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLBe 3: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe200_0000 8M PCI1 IO - * 0xe280_0000 8M PCIe IO - */ - .long FSL_BOOKE_MAS0(1, 3, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLBe 4: 64M Cacheable, non-guarded - * 0xf000_0000 64M LBC SDRAM - */ - .long FSL_BOOKE_MAS0(1, 4, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0) - .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLBe 5: 256K Non-cacheable, guarded - * 0xf8000000 32K BCSR - * 0xf8008000 32K PIB (CS4) - * 0xf8010000 32K PIB (CS5) - */ - .long FSL_BOOKE_MAS0(1, 5, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K) - .long FSL_BOOKE_MAS2(CFG_BCSR_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_BCSR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - -2: - entry_end - -/* - * LAW(Local Access Window) configuration: - * - *0) 0x0000_0000 0x7fff_ffff DDR 2G - *1) 0x8000_0000 0x9fff_ffff PCI1 MEM 512MB - *2) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB - *-) 0xe000_0000 0xe00f_ffff CCSR 1M - *3) 0xe200_0000 0xe27f_ffff PCI1 I/O 8M - *4) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M - *5) 0xc000_0000 0xdfff_ffff SRIO 512MB - *6.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB - *6.b) 0xf800_0000 0xf800_7fff BCSR 32KB - *6.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB - *6.d) 0xf801_0000 0xf801_7fff PIB (CS5) 32KB - *6.e) 0xfe00_0000 0xffff_ffff Flash 32MB - * - *Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - * - * The defines below are 1-off of the actual LAWAR0 usage. - * So LAWAR3 define uses the LAWAR4 register in the ECM. - */ - -#define LAWBAR0 0 -#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN) - -#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff) -#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -#define LAWBAR2 ((CFG_PCIE1_MEM_BASE>>12) & 0xfffff) -#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff) -#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_8M)) - -#define LAWBAR4 ((CFG_PCIE1_IO_PHYS>>12) & 0xfffff) -#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_8M)) - -#define LAWBAR5 ((CFG_SRIO_MEM_BASE>>12) & 0xfffff) -#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -/* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */ -#define LAWBAR6 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff) -#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)) - - .section .bootpg, "ax" - .globl law_entry - -law_entry: - entry_start - .long (4f-3f)/8 -3: - .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3 - .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5,LAWBAR6,LAWAR6 -4: - entry_end diff --git a/board/freescale/mpc8568mds/law.c b/board/freescale/mpc8568mds/law.c new file mode 100644 index 0000000..5e96ea7 --- /dev/null +++ b/board/freescale/mpc8568mds/law.c @@ -0,0 +1,62 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +/* + * LAW(Local Access Window) configuration: + * + *0) 0x0000_0000 0x7fff_ffff DDR 2G + *1) 0x8000_0000 0x9fff_ffff PCI1 MEM 512MB + *2) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB + *-) 0xe000_0000 0xe00f_ffff CCSR 1M + *3) 0xe200_0000 0xe27f_ffff PCI1 I/O 8M + *4) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M + *5) 0xc000_0000 0xdfff_ffff SRIO 512MB + *6.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB + *6.b) 0xf800_0000 0xf800_7fff BCSR 32KB + *6.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB + *6.d) 0xf801_0000 0xf801_7fff PIB (CS5) 32KB + *6.e) 0xfe00_0000 0xffff_ffff Flash 32MB + * + *Notes: + * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. + * If flash is 8M at default position (last 8M), no LAW needed. + * + */ + +struct law_entry law_table[] = { + SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + SET_LAW_ENTRY(3, CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), + SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI), + SET_LAW_ENTRY(5, CFG_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1), + SET_LAW_ENTRY(6, CFG_SRIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO), + /* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */ + SET_LAW_ENTRY(7, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8568mds/tlb.c b/board/freescale/mpc8568mds/tlb.c new file mode 100644 index 0000000..225fc94 --- /dev/null +++ b/board/freescale/mpc8568mds/tlb.c @@ -0,0 +1,100 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 Initializations */ + /* + * TLBe 0: 16M Non-cacheable, guarded + * 0xff000000 16M FLASH (upper half) + * Out of reset this entry is only 4K. + */ + SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x1000000, CFG_FLASH_BASE + 0x1000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_16M, 1), + + /* + * TLBe 1: 16M Non-cacheable, guarded + * 0xfe000000 16M FLASH (lower half) + */ + SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_16M, 1), + + /* + * TLBe 2: 1G Non-cacheable, guarded + * 0x80000000 512M PCI1 MEM + * 0xa0000000 512M PCIe MEM + */ + SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_1G, 1), + + /* + * TLBe 3: 64M Non-cacheable, guarded + * 0xe000_0000 1M CCSRBAR + * 0xe200_0000 8M PCI1 IO + * 0xe280_0000 8M PCIe IO + */ + SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_64M, 1), + + /* + * TLBe 4: 64M Cacheable, non-guarded + * 0xf000_0000 64M LBC SDRAM + */ + SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 4, BOOKE_PAGESZ_64M, 1), + + /* + * TLBe 5: 256K Non-cacheable, guarded + * 0xf8000000 32K BCSR + * 0xf8008000 32K PIB (CS4) + * 0xf8010000 32K PIB (CS5) + */ + SET_TLB_ENTRY(1, CFG_BCSR_BASE, CFG_BCSR_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256K, 1), +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8568mds/u-boot.lds b/board/freescale/mpc8568mds/u-boot.lds index 7917409..6b30f15 100644 --- a/board/freescale/mpc8568mds/u-boot.lds +++ b/board/freescale/mpc8568mds/u-boot.lds @@ -37,7 +37,6 @@ SECTIONS .bootpg 0xFFFFF000: { cpu/mpc85xx/start.o (.bootpg) - board/freescale/mpc8568mds/init.o (.bootpg) } = 0xffff /* Read-only sections, merged into text segment: */ @@ -67,7 +66,6 @@ SECTIONS .text : { cpu/mpc85xx/start.o (.text) - board/freescale/mpc8568mds/init.o (.text) cpu/mpc85xx/traps.o (.text) cpu/mpc85xx/interrupts.o (.text) cpu/mpc85xx/cpu_init.o (.text) |