summaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/mx6sxscm/Kconfig10
-rw-r--r--board/freescale/mx6sxscm/Makefile6
-rw-r--r--board/freescale/mx6sxscm/imximage_lpddr2.cfg7
-rw-r--r--board/freescale/mx6sxscm/mx6sxscm.c138
-rw-r--r--board/freescale/mx6sxscm/plugin.S3
5 files changed, 148 insertions, 16 deletions
diff --git a/board/freescale/mx6sxscm/Kconfig b/board/freescale/mx6sxscm/Kconfig
index d3b1075..7dd62b9 100644
--- a/board/freescale/mx6sxscm/Kconfig
+++ b/board/freescale/mx6sxscm/Kconfig
@@ -9,4 +9,14 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "mx6sxscm"
+config 512MB_LPDDR2
+ bool "lpddr2 size of 512MB"
+ help
+ Set the lpddr2 size to 512 MB.
+
+config MX6SXSCM_EMMC
+ bool "Select for eMMC support"
+ help
+ For epop modules with eMMC on SCM.
+
endif
diff --git a/board/freescale/mx6sxscm/Makefile b/board/freescale/mx6sxscm/Makefile
index c79e512..1921fd8 100644
--- a/board/freescale/mx6sxscm/Makefile
+++ b/board/freescale/mx6sxscm/Makefile
@@ -1,10 +1,8 @@
-# (C) Copyright 2016 Freescale Semiconductor, Inc.
+# Copyright (C) 2016 Freescale Semiconductor, Inc.
+# Copyright 2017 NXP
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y := mx6sxscm.o
-extra-$(CONFIG_USE_PLUGIN) := plugin.bin
-$(obj)/plugin.bin: $(obj)/plugin.o
- $(OBJCOPY) -O binary --gap-fill 0xff $< $@
diff --git a/board/freescale/mx6sxscm/imximage_lpddr2.cfg b/board/freescale/mx6sxscm/imximage_lpddr2.cfg
index 2b143a3..35837dc 100644
--- a/board/freescale/mx6sxscm/imximage_lpddr2.cfg
+++ b/board/freescale/mx6sxscm/imximage_lpddr2.cfg
@@ -1,7 +1,8 @@
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
- * SPDX-License-Identifier: GPL-2.0+
+ * SPDX-License-Identifier: GPL-2.0+
*
* Refer docs/README.imxmage for more details about how-to configure
* and create imximage boot image
@@ -21,13 +22,13 @@ IMAGE_VERSION 2
* spi/sd/nand/onenand, qspi/nor
*/
-#ifdef CONFIG_SYS_BOOT_QSPI
+#ifdef CONFIG_BOOT_QSPI
BOOT_FROM qspi
#else
BOOT_FROM sd
#endif
-#ifdef CONFIG_USE_PLUGIN
+#ifdef CONFIG_USE_IMXIMG_PLUGIN
/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/
PLUGIN board/freescale/mx6sxscm/plugin.bin 0x00907000
#else
diff --git a/board/freescale/mx6sxscm/mx6sxscm.c b/board/freescale/mx6sxscm/mx6sxscm.c
index 6ec7926..c216a6f 100644
--- a/board/freescale/mx6sxscm/mx6sxscm.c
+++ b/board/freescale/mx6sxscm/mx6sxscm.c
@@ -1,7 +1,8 @@
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
- * SPDX-License-Identifier: GPL-2.0+
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/arch/clock.h>
@@ -27,7 +28,7 @@
#include <power/pfuze100_pmic.h>
#include "../common/pfuze.h"
#include <usb.h>
-#include <usb/ehci-fsl.h>
+#include <usb/ehci-ci.h>
#include <asm/imx-common/video.h>
#include <micrel.h>
@@ -89,7 +90,7 @@ DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
- gd->ram_size = PHYS_SDRAM_SIZE;
+ gd->ram_size = imx_ddr_size();
return 0;
}
@@ -210,9 +211,11 @@ static int setup_fec(int fec_id)
ARRAY_SIZE(phy_control_pads));
/* Enable the ENET power, active low */
+ gpio_request(IMX_GPIO_NR(4, 25), "fec power en");
gpio_direction_output(IMX_GPIO_NR(4, 25) , 0);
/* Reset AR8031 PHY */
+ gpio_request(IMX_GPIO_NR(4, 26), "ar8031 reset");
gpio_direction_output(IMX_GPIO_NR(4, 26) , 0);
mdelay(10);
gpio_set_value(IMX_GPIO_NR(4, 26), 1);
@@ -229,8 +232,6 @@ int board_eth_init(bd_t *bis)
imx_iomux_v3_setup_multiple_pads(fec1_pads,
ARRAY_SIZE(fec1_pads));
- setup_fec(CONFIG_FEC_ENET_DEV);
-
return cpu_eth_init(bis);
}
@@ -313,6 +314,7 @@ struct i2c_pads_info i2c_pad_info4 = {
},
};
+#ifdef CONFIG_POWER
int power_init_board(void)
{
struct pmic *pfuze;
@@ -370,8 +372,68 @@ int power_init_board(void)
return 0;
}
+#elif defined(CONFIG_DM_PMIC_PFUZE100)
+int power_init_board(void)
+{
+ struct udevice *dev;
+ unsigned int reg;
+ int ret;
+
+ dev = pfuze_common_init();
+ if (!dev)
+ return -ENODEV;
+
+ ret = pfuze_mode_init(dev, APS_PFM);
+ if (ret < 0)
+ return ret;
+ /* set SW3A to 1.2V for LPDDR2 */
+ reg = pmic_reg_read(dev, PFUZE100_SW3AVOL);
+ reg &= ~0x3f;
+ reg |= 0x20;
+ pmic_reg_write(dev, PFUZE100_SW3AVOL, reg);
+
+ /* set SW3A standby volatage 1.2V */
+ reg = pmic_reg_read(dev, PFUZE100_SW3ASTBY);
+ reg &= ~0x3f;
+ reg |= 0x20;
+ pmic_reg_write(dev, PFUZE100_SW3ASTBY, reg);
+
+ /* set SW1AB normal volatage 1.350V */
+ reg = pmic_reg_read(dev, PFUZE100_SW1ABVOL);
+ reg &= ~0x3f;
+ reg |= PFUZE100_SW1ABC_SETP(13500);
+ pmic_reg_write(dev, PFUZE100_SW1ABVOL, reg);
+
+ /* set SW1AB standby volatage 1.10V */
+ reg = pmic_reg_read(dev, PFUZE100_SW1ABSTBY);
+ reg &= ~0x3f;
+ reg |= PFUZE100_SW1ABC_SETP(11000);
+ pmic_reg_write(dev, PFUZE100_SW1ABSTBY, reg);
+
+ /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+ reg = pmic_reg_read(dev, PFUZE100_SW1ABCONF);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ pmic_reg_write(dev, PFUZE100_SW1ABCONF, reg);
+
+ reg = pmic_reg_read(dev, PFUZE100_VGEN3VOL);
+ reg &= ~LDO_VOL_MASK;
+ reg |= (LDOB_2_80V | (1 << LDO_EN));
+ pmic_reg_write(dev, PFUZE100_VGEN3VOL, reg);
+
+ /* set SWBST boost regulator mode */
+ reg = pmic_reg_read(dev, PFUZE100_SWBSTCON1);
+ reg &= ~SWBST_MODE_MASK;
+ reg |= SWBST_MODE_AUTO << SWBST_MODE_SHIFT;
+ reg |= 0x40;
+ pmic_reg_write(dev, PFUZE100_SWBSTCON1, reg);
+
+ return 0;
+}
+#endif
#ifdef CONFIG_LDO_BYPASS_CHECK
+#ifdef CONFIG_POWER
void ldo_mode_set(int ldo_bypass)
{
unsigned int value;
@@ -419,6 +481,49 @@ void ldo_mode_set(int ldo_bypass)
printf("switch to ldo_bypass mode!\n");
}
}
+#elif defined(CONFIG_DM_PMIC_PFUZE100)
+void ldo_mode_set(int ldo_bypass)
+{
+ struct udevice *dev;
+ int ret;
+ int is_400M;
+ u32 vddarm;
+
+ ret = pmic_get("pfuze100", &dev);
+
+ if (ret == -ENODEV) {
+ printf("No PMIC found!\n");
+ return;
+ }
+
+ /* switch to ldo_bypass mode */
+ if (ldo_bypass) {
+ prep_anatop_bypass();
+ /* decrease VDDARM to 1.275V */
+ pmic_clrsetbits(dev, PFUZE100_SW1ABVOL, 0x3f,
+ PFUZE100_SW1ABC_SETP(12750));
+
+ /* decrease VDDSOC to 1.3V */
+ pmic_clrsetbits(dev, PFUZE100_SW1CVOL, 0x3f,
+ PFUZE100_SW1ABC_SETP(13000));
+
+ is_400M = set_anatop_bypass(1);
+ if (is_400M)
+ vddarm = PFUZE100_SW1ABC_SETP(10750);
+ else
+ vddarm = PFUZE100_SW1ABC_SETP(11750);
+
+ pmic_clrsetbits(dev, PFUZE100_SW1ABVOL, 0x3f, vddarm);
+
+ /* decrease VDDSOC to 1.175V */
+ pmic_clrsetbits(dev, PFUZE100_SW1CVOL, 0x3f,
+ PFUZE100_SW1ABC_SETP(11750));
+
+ finish_anatop_bypass();
+ printf("switch to ldo_bypass mode!\n");
+ }
+}
+#endif
#endif
#ifdef CONFIG_USB_EHCI_MX6
@@ -558,6 +663,8 @@ int board_mmc_init(bd_t *bis)
case 1:
imx_iomux_v3_setup_multiple_pads(
usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ gpio_request(USDHC3_CD_GPIO, "usdhc3 cd");
+ gpio_request(USDHC3_PWR_GPIO, "usdhc3 pwr");
gpio_direction_input(USDHC3_CD_GPIO);
gpio_direction_output(USDHC3_PWR_GPIO, 1);
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
@@ -569,6 +676,7 @@ int board_mmc_init(bd_t *bis)
#else
imx_iomux_v3_setup_multiple_pads(
usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+ gpio_request(USDHC4_CD_GPIO, "usdhc4 cd");
gpio_direction_input(USDHC4_CD_GPIO);
#endif
usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
@@ -592,6 +700,7 @@ int board_mmc_init(bd_t *bis)
#ifdef CONFIG_FSL_QSPI
+#ifndef CONFIG_DM_SPI
#define QSPI_PAD_CTRL1 \
(PAD_CTL_SRE_FAST | PAD_CTL_SPEED_HIGH | \
PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_40ohm)
@@ -611,13 +720,15 @@ static iomux_v3_cfg_t const quadspi_pads[] = {
MX6_PAD_NAND_DATA02__QSPI2_B_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
MX6_PAD_NAND_DATA05__QSPI2_B_DQS | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
};
+#endif
int board_qspi_init(void)
{
+#ifndef CONFIG_DM_SPI
/* Set the iomux */
imx_iomux_v3_setup_multiple_pads(quadspi_pads,
ARRAY_SIZE(quadspi_pads));
-
+#endif
/* Set the clock */
enable_qspi_clk(1);
@@ -683,7 +794,7 @@ void do_enable_lvds(struct display_info_t const *dev)
{
int ret;
- ret = enable_lcdif_clock(dev->bus);
+ ret = enable_lcdif_clock(dev->bus, 1);
if (ret) {
printf("Enable LCDIF clock failed, %d\n", ret);
return;
@@ -698,9 +809,11 @@ void do_enable_lvds(struct display_info_t const *dev)
ARRAY_SIZE(lvds_ctrl_pads));
/* Enable CABC */
+ gpio_request(IMX_GPIO_NR(4, 18), "CABC enable");
gpio_direction_output(IMX_GPIO_NR(4, 18) , 1);
/* Set Brightness to high */
+ gpio_request(IMX_GPIO_NR(4, 11), "lvds backlight");
gpio_direction_output(IMX_GPIO_NR(4, 11) , 1);
}
@@ -709,7 +822,7 @@ void do_enable_parallel_lcd(struct display_info_t const *dev)
{
int ret;
- ret = enable_lcdif_clock(dev->bus);
+ ret = enable_lcdif_clock(dev->bus, 1);
if (ret) {
printf("Enable LCDIF clock failed, %d\n", ret);
return;
@@ -718,11 +831,13 @@ void do_enable_parallel_lcd(struct display_info_t const *dev)
imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
/* Reset the LCD */
+ gpio_request(IMX_GPIO_NR(3, 27), "lcd reset");
gpio_direction_output(IMX_GPIO_NR(3, 27) , 0);
udelay(500);
gpio_direction_output(IMX_GPIO_NR(3, 27) , 1);
/* Set Brightness to high */
+ gpio_request(IMX_GPIO_NR(4, 10), "lcd backlight");
gpio_direction_output(IMX_GPIO_NR(4, 10) , 1);
}
@@ -786,6 +901,7 @@ int board_init(void)
ARRAY_SIZE(peri_3v3_pads));
/* Active high for ncp692 */
+ gpio_request(IMX_GPIO_NR(4, 16), "peri_3v3");
gpio_direction_output(IMX_GPIO_NR(4, 16) , 1);
#ifdef CONFIG_SYS_I2C_MXC
@@ -802,6 +918,11 @@ int board_init(void)
board_qspi_init();
#endif
+ /* Also used for OF_CONTROL enabled */
+#ifdef CONFIG_FEC_MXC
+ setup_fec(CONFIG_FEC_ENET_DEV);
+#endif
+
return 0;
}
@@ -877,6 +998,7 @@ int check_recovery_cmd_file(void)
imx_iomux_v3_setup_multiple_pads(recovery_key_pads,
ARRAY_SIZE(recovery_key_pads));
+ gpio_request(GPIO_VOL_DN_KEY, "volume_dn_key");
gpio_direction_input(GPIO_VOL_DN_KEY);
/* VOL_DN key is low assert */
diff --git a/board/freescale/mx6sxscm/plugin.S b/board/freescale/mx6sxscm/plugin.S
index affe169..4591665 100644
--- a/board/freescale/mx6sxscm/plugin.S
+++ b/board/freescale/mx6sxscm/plugin.S
@@ -1,7 +1,8 @@
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
- * SPDX-License-Identifier: GPL-2.0+
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>