diff options
Diffstat (limited to 'board/freescale')
| -rw-r--r-- | board/freescale/mx6ullevk/imximage_lpddr2.cfg | 120 | ||||
| -rw-r--r-- | board/freescale/mx6ullevk/mx6ullevk.c | 76 | ||||
| -rw-r--r-- | board/freescale/mx6ullevk/plugin.S | 118 |
3 files changed, 314 insertions, 0 deletions
diff --git a/board/freescale/mx6ullevk/imximage_lpddr2.cfg b/board/freescale/mx6ullevk/imximage_lpddr2.cfg new file mode 100644 index 0000000..4fa9103 --- /dev/null +++ b/board/freescale/mx6ullevk/imximage_lpddr2.cfg @@ -0,0 +1,120 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +#define __ASSEMBLY__ +#include <config.h> + +/* image version */ + +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi/sd/nand/onenand, qspi/nor + */ + +#ifdef CONFIG_QSPI_BOOT +BOOT_FROM qspi +#elif defined(CONFIG_NOR_BOOT) +BOOT_FROM nor +#else +BOOT_FROM sd +#endif + +#ifdef CONFIG_USE_IMXIMG_PLUGIN +/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/ +PLUGIN board/freescale/mx6ullevk/plugin.bin 0x00907000 +#else + +#ifdef CONFIG_SECURE_BOOT +CSF CONFIG_CSF_SIZE +#endif + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +DATA 4 0x020c4068 0xffffffff +DATA 4 0x020c406c 0xffffffff +DATA 4 0x020c4070 0xffffffff +DATA 4 0x020c4074 0xffffffff +DATA 4 0x020c4078 0xffffffff +DATA 4 0x020c407c 0xffffffff +DATA 4 0x020c4080 0xffffffff + +DATA 4 0x020E04B4 0x00080000 +DATA 4 0x020E04AC 0x00000000 +DATA 4 0x020E027C 0x00000030 +DATA 4 0x020E0250 0x00000030 +DATA 4 0x020E024C 0x00000030 +DATA 4 0x020E0490 0x00000030 +DATA 4 0x020E0288 0x00000030 +DATA 4 0x020E0270 0x00000000 +DATA 4 0x020E0260 0x00000000 +DATA 4 0x020E0264 0x00000000 +DATA 4 0x020E04A0 0x00000030 +DATA 4 0x020E0494 0x00020000 +DATA 4 0x020E0280 0x00003030 +DATA 4 0x020E0284 0x00003030 +DATA 4 0x020E04B0 0x00020000 +DATA 4 0x020E0498 0x00000030 +DATA 4 0x020E04A4 0x00000030 +DATA 4 0x020E0244 0x00000030 +DATA 4 0x020E0248 0x00000030 + +DATA 4 0x021B001C 0x00008000 +DATA 4 0x021B085C 0x1b4700c7 +DATA 4 0x021B0800 0xA1390003 +DATA 4 0x021B0890 0x23400A38 +DATA 4 0x021B08b8 0x00000800 + +DATA 4 0x021B081C 0x33333333 +DATA 4 0x021B0820 0x33333333 +DATA 4 0x021B082C 0xf3333333 +DATA 4 0x021B0830 0xf3333333 +DATA 4 0x021B083C 0x20000000 +DATA 4 0x021B0848 0x40403439 +DATA 4 0x021B0850 0x4040342D +DATA 4 0x021B08C0 0x00921012 +DATA 4 0x021B08b8 0x00000800 + +DATA 4 0x021B0004 0x00020052 +DATA 4 0x021B0008 0x00000000 +DATA 4 0x021B000C 0x33374133 +DATA 4 0x021B0010 0x00100A82 +DATA 4 0x021B0038 0x00170557 +DATA 4 0x021B0014 0x00000093 +DATA 4 0x021B0018 0x00201748 +DATA 4 0x021B002C 0x0F9F26D2 +DATA 4 0x021B0030 0x009F0010 +DATA 4 0x021B0040 0x00000047 +DATA 4 0x021B0000 0x83100000 +DATA 4 0x021B001C 0x00008010 +DATA 4 0x021B001C 0x003F8030 +DATA 4 0x021B001C 0xFF0A8030 +DATA 4 0x021B001C 0x82018030 +DATA 4 0x021B001C 0x04028030 +DATA 4 0x021B001C 0x01038030 +DATA 4 0x021B0020 0x00001800 +DATA 4 0x021B0818 0x00000000 +DATA 4 0x021B0800 0xA1310003 +DATA 4 0x021B0004 0x00025552 +DATA 4 0x021B0404 0x00011006 +DATA 4 0x021B001C 0x00000000 +#endif diff --git a/board/freescale/mx6ullevk/mx6ullevk.c b/board/freescale/mx6ullevk/mx6ullevk.c index 0bf8e10..fce1f39 100644 --- a/board/freescale/mx6ullevk/mx6ullevk.c +++ b/board/freescale/mx6ullevk/mx6ullevk.c @@ -145,6 +145,82 @@ void ldo_mode_set(int ldo_bypass) #endif #endif +#ifdef CONFIG_DM_PMIC +int power_init_board(void) +{ + struct udevice *dev; + int ret, dev_id, rev_id; + unsigned int reg; + + ret = pmic_get("pfuze3000", &dev); + if (ret == -ENODEV) + return 0; + if (ret != 0) + return ret; + + dev_id = pmic_reg_read(dev, PFUZE3000_DEVICEID); + rev_id = pmic_reg_read(dev, PFUZE3000_REVID); + printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", dev_id, rev_id); + + /* disable Low Power Mode during standby mode */ + reg = pmic_reg_read(dev, PFUZE3000_LDOGCTL); + reg |= 0x1; + pmic_reg_write(dev, PFUZE3000_LDOGCTL, reg); + + /* SW1B step ramp up time from 2us to 4us/25mV */ + reg = 0x40; + pmic_reg_write(dev, PFUZE3000_SW1BCONF, reg); + + /* SW1B mode to APS/PFM */ + reg = 0xc; + pmic_reg_write(dev, PFUZE3000_SW1BMODE, reg); + + /* SW1B standby voltage set to 0.975V */ + reg = 0xb; + pmic_reg_write(dev, PFUZE3000_SW1BSTBY, reg); + + return 0; +} + +#ifdef CONFIG_LDO_BYPASS_CHECK +void ldo_mode_set(int ldo_bypass) +{ + unsigned int value; + u32 vddarm; + struct udevice *dev; + int ret; + + ret = pmic_get("pfuze3000", &dev); + if (ret == -ENODEV) { + printf("No PMIC found!\n"); + return; + } + + /* switch to ldo_bypass mode */ + if (ldo_bypass) { + prep_anatop_bypass(); + /* decrease VDDARM to 1.275V */ + value = pmic_reg_read(dev, PFUZE3000_SW1BVOLT); + value &= ~0x1f; + value |= PFUZE3000_SW1AB_SETP(1275); + pmic_reg_write(dev, PFUZE3000_SW1BVOLT, value); + + set_anatop_bypass(1); + vddarm = PFUZE3000_SW1AB_SETP(1175); + + value = pmic_reg_read(dev, PFUZE3000_SW1BVOLT); + value &= ~0x1f; + value |= vddarm; + pmic_reg_write(dev, PFUZE3000_SW1BVOLT, value); + + finish_anatop_bypass(); + + printf("switch to ldo_bypass mode!\n"); + } +} +#endif +#endif + int dram_init(void) { gd->ram_size = imx_ddr_size(); diff --git a/board/freescale/mx6ullevk/plugin.S b/board/freescale/mx6ullevk/plugin.S index 65a3c45..6b3870da 100644 --- a/board/freescale/mx6ullevk/plugin.S +++ b/board/freescale/mx6ullevk/plugin.S @@ -116,6 +116,120 @@ str r1, [r0, #0x01C] .endm +.macro imx6ull_lpddr2_evk_setting + ldr r0, =IOMUXC_BASE_ADDR + ldr r1, =0x00080000 + str r1, [r0, #0x4B4] + ldr r1, =0x00000000 + str r1, [r0, #0x4AC] + ldr r1, =0x00000030 + str r1, [r0, #0x27C] + str r1, [r0, #0x250] + str r1, [r0, #0x24C] + str r1, [r0, #0x490] + str r1, [r0, #0x288] + + ldr r1, =0x00000000 + str r1, [r0, #0x270] + str r1, [r0, #0x260] + str r1, [r0, #0x264] + + ldr r1, =0x00000030 + str r1, [r0, #0x4A0] + + ldr r1, =0x00020000 + str r1, [r0, #0x494] + + ldr r1, =0x00003030 + str r1, [r0, #0x280] + ldr r1, =0x00003030 + str r1, [r0, #0x284] + + ldr r1, =0x00020000 + str r1, [r0, #0x4B0] + + ldr r1, =0x00000030 + str r1, [r0, #0x498] + str r1, [r0, #0x4A4] + str r1, [r0, #0x244] + str r1, [r0, #0x248] + + ldr r0, =MMDC_P0_BASE_ADDR + ldr r1, =0x00008000 + str r1, [r0, #0x1C] + ldr r1, =0x1b4700c7 + str r1, [r0, #0x85c] + ldr r1, =0xA1390003 + str r1, [r0, #0x800] + ldr r1, =0x23400A38 + str r1, [r0, #0x890] + ldr r1, =0x00000800 + str r1, [r0, #0x8b8] + ldr r1, =0x33333333 + str r1, [r0, #0x81C] + str r1, [r0, #0x820] + ldr r1, =0xF3333333 + str r1, [r0, #0x82C] + str r1, [r0, #0x830] + ldr r1, =0x20000000 + str r1, [r0, #0x83C] + ldr r1, =0x40403439 + str r1, [r0, #0x848] + ldr r1, =0x4040342D + str r1, [r0, #0x850] + ldr r1, =0x00921012 + str r1, [r0, #0x8C0] + ldr r1, =0x00000800 + str r1, [r0, #0x8B8] + + ldr r1, =0x00020052 + str r1, [r0, #0x004] + ldr r1, =0x00000000 + str r1, [r0, #0x008] + ldr r1, =0x33374133 + str r1, [r0, #0x00C] + ldr r1, =0x00100A82 + str r1, [r0, #0x010] + ldr r1, =0x00170557 + str r1, [r0, #0x038] + ldr r1, =0x00000093 + str r1, [r0, #0x014] + ldr r1, =0x00201748 + str r1, [r0, #0x018] + ldr r1, =0x0F9F26D2 + str r1, [r0, #0x02C] + ldr r1, =0x009F0010 + str r1, [r0, #0x030] + ldr r1, =0x00000047 + str r1, [r0, #0x040] + ldr r1, =0x83100000 + str r1, [r0, #0x000] + ldr r1, =0x00008010 + str r1, [r0, #0x01C] + ldr r1, =0x003F8030 + str r1, [r0, #0x01C] + ldr r1, =0xFF0A8030 + str r1, [r0, #0x01C] + ldr r1, =0x82018030 + str r1, [r0, #0x01C] + ldr r1, =0x04028030 + str r1, [r0, #0x01C] + ldr r1, =0x01038030 + str r1, [r0, #0x01C] + ldr r1, =0x00001800 + str r1, [r0, #0x020] + ldr r1, =0x00000000 + str r1, [r0, #0x818] + ldr r1, =0xA1310003 + str r1, [r0, #0x800] + ldr r1, =0x00025552 + str r1, [r0, #0x004] + ldr r1, =0x00011006 + str r1, [r0, #0x404] + ldr r1, =0x00000000 + str r1, [r0, #0x01C] +.endm + .macro imx6_clock_gating ldr r0, =CCM_BASE_ADDR ldr r1, =0xFFFFFFFF @@ -132,7 +246,11 @@ .endm .macro imx6_ddr_setting +#if defined (CONFIG_TARGET_MX6ULL_9X9_EVK) + imx6ull_lpddr2_evk_setting +#else imx6ull_ddr3_evk_setting +#endif .endm /* include the common plugin code here */ |