diff options
Diffstat (limited to 'board/freescale')
24 files changed, 475 insertions, 1070 deletions
diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c index b2d5378..9d6b9a7 100644 --- a/board/freescale/b4860qds/b4860qds.c +++ b/board/freescale/b4860qds/b4860qds.c @@ -488,6 +488,9 @@ int configure_vsc3316_3308(void) } switch (serdes2_prtcl) { +#ifdef CONFIG_PPC_B4420 + case 0x9d: +#endif case 0x9E: case 0x9A: case 0x98: @@ -852,6 +855,9 @@ int config_serdes2_refclks(void) * For this SerDes2's Refclk1 need to be set to 100MHz */ switch (serdes2_prtcl) { +#ifdef CONFIG_PPC_B4420 + case 0x9d: +#endif case 0x9E: case 0x9A: case 0xb2: diff --git a/board/freescale/ls2085a/Makefile b/board/freescale/ls2085a/Makefile new file mode 100644 index 0000000..701b35c --- /dev/null +++ b/board/freescale/ls2085a/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2014 Freescale Semiconductor +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += ls2085a.o +obj-y += ddr.o diff --git a/board/freescale/ls2085a/README b/board/freescale/ls2085a/README new file mode 100644 index 0000000..b7023e1 --- /dev/null +++ b/board/freescale/ls2085a/README @@ -0,0 +1,16 @@ +Freescale ls2085a_emu + +This is a emulator target with limited peripherals. + +Memory map from core's view + +0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom +0x00_0100_0000 .. 0x00_0FFF_FFFF CCSR +0x00_1800_0000 .. 0x00_181F_FFFF OCRAM +0x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1 +0x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1 +0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2 +0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2 + +Other addresses are either reserved, or not used directly by u-boot. +This list should be updated when more addresses are used. diff --git a/board/freescale/ls2085a/ddr.c b/board/freescale/ls2085a/ddr.c new file mode 100644 index 0000000..257bc16 --- /dev/null +++ b/board/freescale/ls2085a/ddr.c @@ -0,0 +1,175 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> +#include "ddr.h" + +DECLARE_GLOBAL_DATA_PTR; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + ulong ddr_freq; + + if (ctrl_num > 3) { + printf("Not supported controller number %d\n", ctrl_num); + return; + } + if (!pdimm->n_ranks) + return; + + /* + * we use identical timing for all slots. If needed, change the code + * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num]; + */ + if (popts->registered_dimm_en) + pbsp = rdimms[0]; + else + pbsp = udimms[0]; + + + /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks && + (pdimm->rank_density >> 30) >= pbsp->rank_gb) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found for data rate %lu MT/s\n" + "Trying to use the highest speed (%u) parameters\n", + ddr_freq, pbsp_highest->datarate_mhz_high); + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + } else { + panic("DIMM is not supported by this board"); + } +found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n" + "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, wrlvl_ctrl_3 0x%x\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, + pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, + pbsp->wrlvl_ctl_3); + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 1; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + +#ifdef CONFIG_SYS_FSL_DDR4 + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_80ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm) | + DDR_CDR2_VREF_OVRD(70); /* Vref = 70% */ +#else + /* DHC_EN =1, ODT = 75 Ohm */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); +#endif +} + +#ifdef CONFIG_SYS_DDR_RAW_TIMING +dimm_params_t ddr_raw_timing = { + .n_ranks = 2, + .rank_density = 1073741824u, + .capacity = 2147483648, + .primary_sdram_width = 64, + .ec_sdram_width = 0, + .registered_dimm = 0, + .mirrored_dimm = 0, + .n_row_addr = 14, + .n_col_addr = 10, + .n_banks_per_sdram_device = 8, + .edc_config = 0, + .burst_lengths_bitmask = 0x0c, + + .tckmin_x_ps = 937, + .caslat_x = 0x6FC << 4, /* 14,13,11,10,9,8,7,6 */ + .taa_ps = 13090, + .twr_ps = 15000, + .trcd_ps = 13090, + .trrd_ps = 5000, + .trp_ps = 13090, + .tras_ps = 33000, + .trc_ps = 46090, + .trfc_ps = 160000, + .twtr_ps = 7500, + .trtp_ps = 7500, + .refresh_rate_ps = 7800000, + .tfaw_ps = 25000, +}; + +int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, + unsigned int controller_number, + unsigned int dimm_number) +{ + const char dimm_model[] = "Fixed DDR on board"; + + if (((controller_number == 0) && (dimm_number == 0)) || + ((controller_number == 1) && (dimm_number == 0))) { + memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t)); + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1); + } + + return 0; +} +#endif +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size; + + puts("Initializing DDR...."); + + puts("using SPD\n"); + dram_size = fsl_ddr_sdram(); + + return dram_size; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) { + gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; + gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; + gd->bd->bi_dram[1].size = gd->ram_size - + CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; + } else { + gd->bd->bi_dram[0].size = gd->ram_size; + } +} diff --git a/board/freescale/ls2085a/ddr.h b/board/freescale/ls2085a/ddr.h new file mode 100644 index 0000000..77f6aaf --- /dev/null +++ b/board/freescale/ls2085a/ddr.h @@ -0,0 +1,57 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DDR_H__ +#define __DDR_H__ +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ + +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {2, 2140, 0, 4, 4, 0x0, 0x0}, + {1, 2140, 0, 4, 4, 0x0, 0x0}, + {} +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {4, 2140, 0, 5, 4, 0x0, 0x0}, + {2, 2140, 0, 5, 4, 0x0, 0x0}, + {1, 2140, 0, 4, 4, 0x0, 0x0}, + {} +}; + +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +static const struct board_specific_parameters *rdimms[] = { + rdimm0, +}; + + +#endif diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2085a/ls2085a.c new file mode 100644 index 0000000..a18db1d --- /dev/null +++ b/board/freescale/ls2085a/ls2085a.c @@ -0,0 +1,100 @@ +/* + * Copyright 2014 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <netdev.h> +#include <fsl_ifc.h> +#include <fsl_ddr.h> +#include <asm/io.h> +#include <fdt_support.h> +#include <libfdt.h> +#include <fsl_mc.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + init_final_memctl_regs(); + return 0; +} + +int board_early_init_f(void) +{ + init_early_memctl_regs(); /* tighten IFC timing */ + + return 0; +} + +int dram_init(void) +{ + printf("DRAM: "); + gd->ram_size = initdram(0); + + return 0; +} + +int timer_init(void) +{ + u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR; + u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR; + + out_le32(cltbenr, 0x1); /* enable cluster0 timebase */ + out_le32(cntcr, 0x1); /* enable clock for timer */ + + return 0; +} + +/* + * Board specific reset that is system reset. + */ +void reset_cpu(ulong addr) +{ +} + +int board_eth_init(bd_t *bis) +{ + int error = 0; + +#ifdef CONFIG_SMC91111 + error = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + +#ifdef CONFIG_FSL_MC_ENET + error = cpu_eth_init(bis); +#endif + return error; +} + +#ifdef CONFIG_FSL_MC_ENET +void fdt_fixup_board_enet(void *fdt) +{ + int offset; + + offset = fdt_path_offset(fdt, "/fsl,dprc@0"); + if (get_mc_boot_status() == 0) + fdt_status_okay(fdt, offset); + else + fdt_status_fail(fdt, offset); +} +#endif + +#ifdef CONFIG_OF_BOARD_SETUP +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + /* limit the memory size to bank 1 until Linux can handle 40-bit PA */ + base = getenv_bootm_low(); + size = getenv_bootm_size(); + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_FSL_MC_ENET + fdt_fixup_board_enet(blob); +#endif +} +#endif diff --git a/board/freescale/m5253demo/flash.c b/board/freescale/m5253demo/flash.c index 387e454..16bba59 100644 --- a/board/freescale/m5253demo/flash.c +++ b/board/freescale/m5253demo/flash.c @@ -177,7 +177,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) { FPWV *addr; int flag, prot, sect, count; - ulong type, start, last; + ulong type, start; int rcode = 0, flashtype = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -217,7 +217,6 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) flag = disable_interrupts(); start = get_timer(0); - last = start; if ((s_last - s_first) == (CONFIG_SYS_SST_SECT - 1)) { if (prot == 0) { @@ -319,14 +318,13 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) { ulong wp, count; u16 data; - int rc, port_width; + int rc; if (info->flash_id == FLASH_UNKNOWN) return 4; /* get lower word aligned address */ wp = addr; - port_width = sizeof(FPW); /* handle unaligned start bytes */ if (wp & 1) { diff --git a/board/freescale/mpc8260ads/Makefile b/board/freescale/mpc8260ads/Makefile deleted file mode 100644 index 007d958..0000000 --- a/board/freescale/mpc8260ads/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := mpc8260ads.o flash.o diff --git a/board/freescale/mpc8260ads/flash.c b/board/freescale/mpc8260ads/flash.c deleted file mode 100644 index 4012d45..0000000 --- a/board/freescale/mpc8260ads/flash.c +++ /dev/null @@ -1,476 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com - * Add support the Sharp chips on the mpc8260ads. - * I started with board/ip860/flash.c and made changes I found in - * the MTD project by David Schleef. - * - * (C) Copyright 2003 Arabella Software Ltd. - * Yuli Barcohen <yuli@arabellasw.com> - * Re-written to support multi-bank flash SIMMs. - * Added support for real protection and JFFS2. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> - -/* Intel-compatible flash ID */ -#define INTEL_COMPAT 0x89898989 -#define INTEL_ALT 0xB0B0B0B0 - -/* Intel-compatible flash commands */ -#define INTEL_PROGRAM 0x10101010 -#define INTEL_ERASE 0x20202020 -#define INTEL_CLEAR 0x50505050 -#define INTEL_LOCKBIT 0x60606060 -#define INTEL_PROTECT 0x01010101 -#define INTEL_STATUS 0x70707070 -#define INTEL_READID 0x90909090 -#define INTEL_CONFIRM 0xD0D0D0D0 -#define INTEL_RESET 0xFFFFFFFF - -/* Intel-compatible flash status bits */ -#define INTEL_FINISHED 0x80808080 -#define INTEL_OK 0x80808080 - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * This board supports 32-bit wide flash SIMMs (4x8-bit configuration.) - * Up to 32MB of flash supported (up to 4 banks.) - * BCSR is used for flash presence detect (page 4-65 of the User's Manual) - * - * The following code can not run from flash! - */ -unsigned long flash_init (void) -{ - ulong size = 0, sect_start, sect_size = 0, bank_size; - ushort sect_count = 0; - int i, j, nbanks; - vu_long *addr = (vu_long *)CONFIG_SYS_FLASH_BASE; - vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR; - - switch (bcsr[2] & 0xF) { - case 0: - nbanks = 4; - break; - case 1: - nbanks = 2; - break; - case 2: - nbanks = 1; - break; - default: /* Unsupported configurations */ - nbanks = CONFIG_SYS_MAX_FLASH_BANKS; - } - - if (nbanks > CONFIG_SYS_MAX_FLASH_BANKS) - nbanks = CONFIG_SYS_MAX_FLASH_BANKS; - - for (i = 0; i < nbanks; i++) { - *addr = INTEL_READID; /* Read Intelligent Identifier */ - if ((addr[0] == INTEL_COMPAT) || (addr[0] == INTEL_ALT)) { - switch (addr[1]) { - case SHARP_ID_28F016SCL: - case SHARP_ID_28F016SCZ: - flash_info[i].flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT; - sect_count = 32; - sect_size = 0x40000; - break; - default: - flash_info[i].flash_id = FLASH_UNKNOWN; - sect_count = CONFIG_SYS_MAX_FLASH_SECT; - sect_size = - CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS / CONFIG_SYS_MAX_FLASH_SECT; - } - } - else - flash_info[i].flash_id = FLASH_UNKNOWN; - if (flash_info[i].flash_id == FLASH_UNKNOWN) { - printf("### Unknown flash ID %08lX %08lX at address %08lX ###\n", - addr[0], addr[1], (ulong)addr); - size = 0; - *addr = INTEL_RESET; /* Reset bank to Read Array mode */ - break; - } - flash_info[i].sector_count = sect_count; - flash_info[i].size = bank_size = sect_size * sect_count; - size += bank_size; - sect_start = (ulong)addr; - for (j = 0; j < sect_count; j++) { - addr = (vu_long *)sect_start; - flash_info[i].start[j] = sect_start; - flash_info[i].protect[j] = (addr[2] == 0x01010101); - sect_start += sect_size; - } - *addr = INTEL_RESET; /* Reset bank to Read Array mode */ - addr = (vu_long *)sect_start; - } - - if (size == 0) { /* Unknown flash, fill with hard-coded values */ - sect_start = CONFIG_SYS_FLASH_BASE; - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].size = CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS; - flash_info[i].sector_count = sect_count; - for (j = 0; j < sect_count; j++) { - flash_info[i].start[j] = sect_start; - flash_info[i].protect[j] = 0; - sect_start += sect_size; - } - } - size = CONFIG_SYS_FLASH_SIZE; - } - else - for (i = nbanks; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].size = 0; - flash_info[i].sector_count = 0; - } - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, - &flash_info[0]); -#endif - return (size); -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: printf ("Intel "); break; - case FLASH_MAN_SHARP: printf ("Sharp "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F016SV: printf ("28F016SV (16 Mbit, 32 x 64k)\n"); - break; - case FLASH_28F160S3: printf ("28F160S3 (16 Mbit, 32 x 512K)\n"); - break; - case FLASH_28F320S3: printf ("28F320S3 (32 Mbit, 64 x 512K)\n"); - break; - case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ( ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) - && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - vu_long *addr = (vu_long *)(info->start[sect]); - - last = start = get_timer (0); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Clear Status Register */ - *addr = INTEL_CLEAR; - /* Single Block Erase Command */ - *addr = INTEL_ERASE; - /* Confirm */ - *addr = INTEL_CONFIRM; - - if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) { - /* Resume Command, as per errata update */ - *addr = INTEL_CONFIRM; - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = INTEL_RESET; /* reset bank */ - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - - if (*addr != INTEL_OK) { - printf("Block erase failed at %08X, CSR=%08X\n", - (uint)addr, (uint)*addr); - *addr = INTEL_RESET; /* reset bank */ - return 1; - } - - /* reset to read mode */ - *addr = INTEL_RESET; - } - } - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - ulong start; - int rc = 0; - int flag; - vu_long *addr = (vu_long *)dest; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - return (2); - } - - *addr = INTEL_CLEAR; /* Clear status register */ - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Write Command */ - *addr = INTEL_PROGRAM; - - /* Write Data */ - *addr = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - printf("Write timed out\n"); - rc = 1; - break; - } - } - if (*addr != INTEL_OK) { - printf ("Write failed at %08X, CSR=%08X\n", (uint)addr, (uint)*addr); - rc = 1; - } - - *addr = INTEL_RESET; /* Reset to read array mode */ - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - *(vu_long *)wp = INTEL_RESET; /* Reset to read array mode */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - rc = write_word(info, wp, data); - - return rc; -} - -/*----------------------------------------------------------------------- - * Set/Clear sector's lock bit, returns: - * 0 - OK - * 1 - Error (timeout, voltage problems, etc.) - */ -int flash_real_protect(flash_info_t *info, long sector, int prot) -{ - ulong start; - int i; - int rc = 0; - vu_long *addr = (vu_long *)(info->start[sector]); - int flag = disable_interrupts(); - - *addr = INTEL_CLEAR; /* Clear status register */ - if (prot) { /* Set sector lock bit */ - *addr = INTEL_LOCKBIT; /* Sector lock bit */ - *addr = INTEL_PROTECT; /* set */ - } - else { /* Clear sector lock bit */ - *addr = INTEL_LOCKBIT; /* All sectors lock bits */ - *addr = INTEL_CONFIRM; /* clear */ - } - - start = get_timer(0); - while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) { - printf("Flash lock bit operation timed out\n"); - rc = 1; - break; - } - } - - if (*addr != INTEL_OK) { - printf("Flash lock bit operation failed at %08X, CSR=%08X\n", - (uint)addr, (uint)*addr); - rc = 1; - } - - if (!rc) - info->protect[sector] = prot; - - /* - * Clear lock bit command clears all sectors lock bits, so - * we have to restore lock bits of protected sectors. - */ - if (!prot) - for (i = 0; i < info->sector_count; i++) - if (info->protect[i]) { - addr = (vu_long *)(info->start[i]); - *addr = INTEL_LOCKBIT; /* Sector lock bit */ - *addr = INTEL_PROTECT; /* set */ - udelay(CONFIG_SYS_FLASH_LOCK_TOUT * 1000); - } - - if (flag) - enable_interrupts(); - - *addr = INTEL_RESET; /* Reset to read array mode */ - - return rc; -} diff --git a/board/freescale/mpc8260ads/mpc8260ads.c b/board/freescale/mpc8260ads/mpc8260ads.c deleted file mode 100644 index b8c8ce9..0000000 --- a/board/freescale/mpc8260ads/mpc8260ads.c +++ /dev/null @@ -1,544 +0,0 @@ -/* - * (C) Copyright 2001-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Modified during 2001 by - * Advanced Communications Technologies (Australia) Pty. Ltd. - * Howard Walker, Tuong Vu-Dinh - * - * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com - * Added support for the 16M dram simm on the 8260ads boards - * - * (C) Copyright 2003-2004 Arabella Software Ltd. - * Yuli Barcohen <yuli@arabellasw.com> - * Added support for SDRAM DIMMs SPD EEPROM, MII, Ethernet PHY init. - * - * Copyright (c) 2005 MontaVista Software, Inc. - * Vitaly Bordug <vbordug@ru.mvista.com> - * Added support for PCI. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <ioports.h> -#include <mpc8260.h> -#include <asm/m8260_pci.h> -#include <i2c.h> -#include <spd.h> -#include <miiphy.h> -#ifdef CONFIG_PCI -#include <pci.h> -#endif -#ifdef CONFIG_OF_LIBFDT -#include <libfdt.h> -#include <fdt_support.h> -#endif - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -#define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1) -#define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2) -#define CONFIG_SYS_FCC3 (CONFIG_ETHER_INDEX == 3) - -const iop_conf_t iop_conf_tab[4][32] = { - - /* Port A configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */ - /* PA30 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */ - /* PA29 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */ - /* PA28 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */ - /* PA27 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */ - /* PA26 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */ - /* PA25 */ { 0, 0, 0, 0, 0, 0 }, /* PA25 */ - /* PA24 */ { 0, 0, 0, 0, 0, 0 }, /* PA24 */ - /* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */ - /* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */ - /* PA21 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */ - /* PA20 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */ - /* PA19 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */ - /* PA18 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */ - /* PA17 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */ - /* PA16 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */ - /* PA15 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */ - /* PA14 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */ - /* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */ - /* PA12 */ { 0, 0, 0, 0, 0, 0 }, /* PA12 */ - /* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */ - /* PA10 */ { 0, 0, 0, 0, 0, 0 }, /* PA10 */ - /* PA9 */ { 0, 0, 0, 0, 0, 0 }, /* PA9 */ - /* PA8 */ { 0, 0, 0, 0, 0, 0 }, /* PA8 */ - /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ - /* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */ - /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ - /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ - /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ - /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ - /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */ - /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ - }, - - /* Port B configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ - /* PB30 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ - /* PB29 */ { CONFIG_SYS_FCC2, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ - /* PB28 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ - /* PB27 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ - /* PB26 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ - /* PB25 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ - /* PB24 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ - /* PB23 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ - /* PB22 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ - /* PB21 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ - /* PB20 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ - /* PB19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ - /* PB18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ - /* PB17 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */ - /* PB16 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */ - /* PB15 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */ - /* PB14 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */ - /* PB13 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:COL */ - /* PB12 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:CRS */ - /* PB11 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB10 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB9 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB8 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB7 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB6 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB5 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB4 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - }, - - /* Port C */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */ - /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */ - /* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */ - /* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */ - /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */ - /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */ - /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */ - /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */ - /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */ - /* PC22 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII Tx Clock (CLK10) */ - /* PC21 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII Rx Clock (CLK11) */ - /* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */ -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS - /* PC19 */ { 1, 0, 0, 1, 0, 0 }, /* FETHMDC */ - /* PC18 */ { 1, 0, 0, 0, 0, 0 }, /* FETHMDIO */ - /* PC17 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Rx Clock (CLK15) */ - /* PC16 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Tx Clock (CLK16) */ -#else - /* PC19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Rx Clock (CLK13) */ - /* PC18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Tx Clock (CLK14) */ - /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */ - /* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */ -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */ - /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */ - /* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */ - /* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */ - /* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */ - /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */ -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS - /* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */ - /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* PC9 */ -#else - /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FETHMDC */ - /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* FETHMDIO */ -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */ - /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */ - /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */ - /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */ - /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */ - /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */ - /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */ - /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */ - /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */ - /* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */ - }, - - /* Port D */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 UART RxD */ - /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 UART TxD */ - /* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */ - /* PD28 */ { 0, 1, 0, 0, 0, 0 }, /* PD28 */ - /* PD27 */ { 0, 1, 1, 1, 0, 0 }, /* PD27 */ - /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */ - /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */ - /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */ - /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */ - /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */ - /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */ - /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */ - /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */ - /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */ - /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */ - /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */ - /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ - /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ - /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ - /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ - /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ - /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ - /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ - /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */ - /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ - /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ - /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - } -}; - -void reset_phy (void) -{ - vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR; - - /* Reset the PHY */ -#if CONFIG_SYS_PHY_ADDR == 0 - bcsr[1] &= ~(FETHIEN1 | FETH1_RST); - udelay(2); - bcsr[1] |= FETH1_RST; -#else - bcsr[3] &= ~(FETHIEN2 | FETH2_RST); - udelay(2); - bcsr[3] |= FETH2_RST; -#endif /* CONFIG_SYS_PHY_ADDR == 0 */ - udelay(1000); -#ifdef CONFIG_MII -#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS - /* - * Do not bypass Rx/Tx (de)scrambler (fix configuration error) - * Enable autonegotiation. - */ - bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, 16, 0x610); - bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_BMCR, - BMCR_ANENABLE | BMCR_ANRESTART); -#else - /* - * Ethernet PHY is configured (by means of configuration pins) - * to work at 10Mb/s only. We reconfigure it using MII - * to advertise all capabilities, including 100Mb/s, and - * restart autonegotiation. - */ - - /* Advertise all capabilities */ - bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_ADVERTISE, 0x01E1); - - /* Do not bypass Rx/Tx (de)scrambler */ - bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_FCSCOUNTER, 0x0000); - - bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_BMCR, - BMCR_ANENABLE | BMCR_ANRESTART); -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */ -#endif /* CONFIG_MII */ -} - -#ifdef CONFIG_PCI -typedef struct pci_ic_s { - unsigned long pci_int_stat; - unsigned long pci_int_mask; -}pci_ic_t; -#endif - -int board_early_init_f (void) -{ - vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR; - -#ifdef CONFIG_PCI - volatile pci_ic_t* pci_ic = (pci_ic_t *) CONFIG_SYS_PCI_INT; - - /* mask alll the PCI interrupts */ - pci_ic->pci_int_mask |= 0xfff00000; -#endif -#if (CONFIG_CONS_INDEX == 1) || (CONFIG_KGDB_INDEX == 1) - bcsr[1] &= ~RS232EN_1; -#endif -#if (CONFIG_CONS_INDEX > 1) || (CONFIG_KGDB_INDEX > 1) - bcsr[1] &= ~RS232EN_2; -#endif - -#if CONFIG_ADSTYPE != CONFIG_SYS_8260ADS /* PCI mode can be selected */ -#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS - if ((bcsr[3] & BCSR_PCI_MODE) == 0) /* PCI mode selected by JP9 */ -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */ - { - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - - immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN; - immap->im_siu_conf.sc_siumcr = - (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11) - | SIUMCR_LBPC01; - } -#endif /* CONFIG_ADSTYPE != CONFIG_SYS_8260ADS */ - - return 0; -} - -#define ns2clk(ns) (ns / (1000000000 / CONFIG_8260_CLKIN) + 1) - -phys_size_t initdram (int board_type) -{ -#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS - long int msize = 32; -#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS - long int msize = 64; -#else - long int msize = 16; -#endif - -#ifndef CONFIG_SYS_RAMBOOT - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immap->im_memctl; - volatile uchar *ramaddr, c = 0xff; - uint or; - uint psdmr; - uint psrt; - - int i; - - immap->im_siu_conf.sc_ppc_acr = 0x00000002; - immap->im_siu_conf.sc_ppc_alrh = 0x01267893; - immap->im_siu_conf.sc_tescr1 = 0x00004000; - - memctl->memc_mptpr = CONFIG_SYS_MPTPR; -#ifdef CONFIG_SYS_LSDRAM_BASE - /* - Initialise local bus SDRAM only if the pins - are configured as local bus pins and not as PCI. - The configuration is determined by the HRCW. - */ - if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) { - memctl->memc_lsrt = CONFIG_SYS_LSRT; -#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS /* CS3 */ - memctl->memc_or3 = 0xFF803280; - memctl->memc_br3 = CONFIG_SYS_LSDRAM_BASE | 0x00001861; -#else /* CS4 */ - memctl->memc_or4 = 0xFFC01480; - memctl->memc_br4 = CONFIG_SYS_LSDRAM_BASE | 0x00001861; -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */ - memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x28000000; - ramaddr = (uchar *) CONFIG_SYS_LSDRAM_BASE; - *ramaddr = c; - memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x08000000; - for (i = 0; i < 8; i++) - *ramaddr = c; - memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x18000000; - *ramaddr = c; - memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x40000000; - } -#endif /* CONFIG_SYS_LSDRAM_BASE */ - - /* Init 60x bus SDRAM */ -#ifdef CONFIG_SPD_EEPROM - { - spd_eeprom_t spd; - uint pbi, bsel, rowst, lsb, tmp; - - i2c_read (CONFIG_SPD_ADDR, 0, 1, (uchar *) & spd, sizeof (spd)); - - /* Bank-based interleaving is not supported for physical bank - sizes greater than 128MB which is encoded as 0x20 in SPD - */ - pbi = (spd.row_dens > 32) ? 1 : CONFIG_SDRAM_PBI; - msize = spd.nrows * (4 * spd.row_dens); /* Mixed size not supported */ - or = ~(msize - 1) << 20; /* SDAM */ - switch (spd.nbanks) { /* BPD */ - case 2: - bsel = 1; - break; - case 4: - bsel = 2; - or |= 0x00002000; - break; - case 8: - bsel = 3; - or |= 0x00004000; - break; - } - lsb = 3; /* For 64-bit port, lsb is 3 bits */ - - if (pbi) { /* Bus partition depends on interleaving */ - rowst = 32 - (spd.nrow_addr + spd.ncol_addr + bsel + lsb); - or |= (rowst << 9); /* ROWST */ - } else { - rowst = 32 - (spd.nrow_addr + spd.ncol_addr + lsb); - or |= ((rowst * 2 - 12) << 9); /* ROWST */ - } - or |= ((spd.nrow_addr - 9) << 6); /* NUMR */ - - psdmr = (pbi << 31); /* PBI */ - /* Bus multiplexing parameters */ - tmp = 32 - (lsb + spd.nrow_addr); /* Tables 10-19 and 10-20 */ - psdmr |= ((tmp - (rowst - 5) - 13) << 24); /* SDAM */ - psdmr |= ((tmp - 3 - 12) << 21); /* BSMA */ - - tmp = (31 - lsb - 10) - tmp; - /* Pin connected to SDA10 is (31 - lsb - 10). - rowst is multiplexed over (32 - (lsb + spd.nrow_addr)), - so (rowst + tmp) alternates with AP. - */ - if (pbi) /* Table 10-7 */ - psdmr |= ((10 - (rowst + tmp)) << 18); /* SDA10 */ - else - psdmr |= ((12 - (rowst + tmp)) << 18); /* SDA10 */ - - /* SDRAM device-specific parameters */ - tmp = ns2clk (70); /* Refresh recovery is not in SPD, so assume 70ns */ - switch (tmp) { /* RFRC */ - case 1: - case 2: - psdmr |= (1 << 15); - break; - case 3: - case 4: - case 5: - case 6: - case 7: - case 8: - psdmr |= ((tmp - 2) << 15); - break; - default: - psdmr |= (7 << 15); - } - psdmr |= (ns2clk (spd.trp) % 8 << 12); /* PRETOACT */ - psdmr |= (ns2clk (spd.trcd) % 8 << 9); /* ACTTORW */ - /* BL=0 because for 64-bit SDRAM burst length must be 4 */ - /* LDOTOPRE ??? */ - for (i = 0, tmp = spd.write_lat; (i < 4) && ((tmp & 1) == 0); i++) - tmp >>= 1; - switch (i) { /* WRC */ - case 0: - case 1: - psdmr |= (1 << 4); - break; - case 2: - case 3: - psdmr |= (i << 4); - break; - } - /* EAMUX=0 - no external address multiplexing */ - /* BUFCMD=0 - no external buffers */ - for (i = 1, tmp = spd.cas_lat; (i < 3) && ((tmp & 1) == 0); i++) - tmp >>= 1; - psdmr |= i; /* CL */ - - switch (spd.refresh & 0x7F) { - case 1: - tmp = 3900; - break; - case 2: - tmp = 7800; - break; - case 3: - tmp = 31300; - break; - case 4: - tmp = 62500; - break; - case 5: - tmp = 125000; - break; - default: - tmp = 15625; - } - psrt = tmp / (1000000000 / CONFIG_8260_CLKIN * - ((memctl->memc_mptpr >> 8) + 1)) - 1; -#ifdef SPD_DEBUG - printf ("\nDIMM type: %-18.18s\n", spd.mpart); - printf ("SPD size: %d\n", spd.info_size); - printf ("EEPROM size: %d\n", 1 << spd.chip_size); - printf ("Memory type: %d\n", spd.mem_type); - printf ("Row addr: %d\n", spd.nrow_addr); - printf ("Column addr: %d\n", spd.ncol_addr); - printf ("# of rows: %d\n", spd.nrows); - printf ("Row density: %d\n", spd.row_dens); - printf ("# of banks: %d\n", spd.nbanks); - printf ("Data width: %d\n", - 256 * spd.dataw_msb + spd.dataw_lsb); - printf ("Chip width: %d\n", spd.primw); - printf ("Refresh rate: %02X\n", spd.refresh); - printf ("CAS latencies: %02X\n", spd.cas_lat); - printf ("Write latencies: %02X\n", spd.write_lat); - printf ("tRP: %d\n", spd.trp); - printf ("tRCD: %d\n", spd.trcd); - - printf ("OR=%X, PSDMR=%08X, PSRT=%0X\n", or, psdmr, psrt); -#endif /* SPD_DEBUG */ - } -#else /* !CONFIG_SPD_EEPROM */ - or = CONFIG_SYS_OR2; - psdmr = CONFIG_SYS_PSDMR; - psrt = CONFIG_SYS_PSRT; -#endif /* CONFIG_SPD_EEPROM */ - memctl->memc_psrt = psrt; - memctl->memc_or2 = or; - memctl->memc_br2 = CONFIG_SYS_SDRAM_BASE | 0x00000041; - ramaddr = (uchar *) CONFIG_SYS_SDRAM_BASE; - memctl->memc_psdmr = psdmr | 0x28000000; /* Precharge all banks */ - *ramaddr = c; - memctl->memc_psdmr = psdmr | 0x08000000; /* CBR refresh */ - for (i = 0; i < 8; i++) - *ramaddr = c; - - memctl->memc_psdmr = psdmr | 0x18000000; /* Mode Register write */ - *ramaddr = c; - memctl->memc_psdmr = psdmr | 0x40000000; /* Refresh enable */ - *ramaddr = c; -#endif /* CONFIG_SYS_RAMBOOT */ - - /* return total 60x bus SDRAM size */ - return (msize * 1024 * 1024); -} - -int checkboard (void) -{ -#if CONFIG_ADSTYPE == CONFIG_SYS_8260ADS - puts ("Board: Motorola MPC8260ADS\n"); -#elif CONFIG_ADSTYPE == CONFIG_SYS_8266ADS - puts ("Board: Motorola MPC8266ADS\n"); -#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS - puts ("Board: Motorola PQ2FADS-ZU\n"); -#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS - puts ("Board: Motorola MPC8272ADS\n"); -#else - puts ("Board: unknown\n"); -#endif - return 0; -} - -#ifdef CONFIG_PCI -struct pci_controller hose; - -extern void pci_mpc8250_init(struct pci_controller *); - -void pci_init_board(void) -{ - pci_mpc8250_init(&hose); -} -#endif - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif -} -#endif diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds index 61b83bf..8a4a8a2 100644 --- a/board/freescale/mx31ads/u-boot.lds +++ b/board/freescale/mx31ads/u-boot.lds @@ -70,6 +70,8 @@ SECTIONS *(.__rel_dyn_end) } + .hash : { *(.hash*) } + .end : { *(.__end) @@ -100,7 +102,7 @@ SECTIONS .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) } - .hash : { *(.hash*) } + .gnu.hash : { *(.gnu.hash) } .plt : { *(.plt*) } .interp : { *(.interp*) } .gnu : { *(.gnu*) } diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c index d8c8745..2b883c7 100644 --- a/board/freescale/p1023rds/p1023rds.c +++ b/board/freescale/p1023rds/p1023rds.c @@ -182,11 +182,6 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)base, (u64)size); - /* By default NOR is on, and NAND is disabled */ -#ifdef CONFIG_NAND_U_BOOT - do_fixup_by_path_string(blob, "nor_flash", "status", "disabled"); - do_fixup_by_path_string(blob, "nand_flash", "status", "okay"); -#endif #ifdef CONFIG_HAS_FSL_DR_USB fdt_fixup_dr_usb(blob, bd); #endif diff --git a/board/freescale/p1023rds/tlb.c b/board/freescale/p1023rds/tlb.c index 8b2bf50..3c92c14 100644 --- a/board/freescale/p1023rds/tlb.c +++ b/board/freescale/p1023rds/tlb.c @@ -36,7 +36,6 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_4M, 1), -#ifndef CONFIG_NAND_SPL /* *W*G* - BCSR and NOR flash on local bus*/ /* This will be changed to *I*G* after relocation to RAM. */ SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE_PHYS, @@ -79,7 +78,6 @@ struct fsl_e_tlb_entry tlb_table[] = { CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 10, BOOKE_PAGESZ_1M, 1), -#endif /* *I*G - NAND */ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, diff --git a/board/freescale/t208xqds/ddr.h b/board/freescale/t208xqds/ddr.h index 9fc879a..ed52fef6 100644 --- a/board/freescale/t208xqds/ddr.h +++ b/board/freescale/t208xqds/ddr.h @@ -25,21 +25,21 @@ struct board_specific_parameters { static const struct board_specific_parameters udimm0[] = { /* * memory controller 0 - * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | - * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | */ - {2, 1200, 2, 5, 7, 0x0808090a, 0x0b0c0c0a}, - {2, 1500, 2, 5, 6, 0x07070809, 0x0a0b0b09}, - {2, 1600, 2, 5, 8, 0x090b0b0d, 0x0d0e0f0b}, - {2, 1700, 2, 4, 7, 0x080a0a0c, 0x0c0d0e0a}, - {2, 1900, 2, 5, 9, 0x0a0b0c0e, 0x0f10120c}, - {2, 2140, 2, 4, 8, 0x090a0b0d, 0x0e0f110b}, - {1, 1200, 2, 5, 7, 0x0808090a, 0x0b0c0c0a}, - {1, 1500, 2, 5, 6, 0x07070809, 0x0a0b0b09}, - {1, 1600, 2, 5, 8, 0x090b0b0d, 0x0d0e0f0b}, - {1, 1700, 2, 4, 7, 0x080a0a0c, 0x0c0d0e0a}, - {1, 1900, 2, 5, 9, 0x0a0b0c0e, 0x0f10120c}, - {1, 2140, 2, 4, 8, 0x090a0b0d, 0x0e0f110b}, + {2, 1200, 0, 5, 7, 0x0808090a, 0x0b0c0c0a}, + {2, 1500, 0, 5, 6, 0x07070809, 0x0a0b0b09}, + {2, 1600, 0, 5, 8, 0x090b0b0d, 0x0d0e0f0b}, + {2, 1700, 0, 4, 7, 0x080a0a0c, 0x0c0d0e0a}, + {2, 1900, 0, 5, 9, 0x0a0b0c0e, 0x0f10120c}, + {2, 2140, 0, 4, 8, 0x090a0b0d, 0x0e0f110b}, + {1, 1200, 0, 5, 7, 0x0808090a, 0x0b0c0c0a}, + {1, 1500, 0, 5, 6, 0x07070809, 0x0a0b0b09}, + {1, 1600, 0, 5, 8, 0x090b0b0d, 0x0d0e0f0b}, + {1, 1700, 0, 4, 7, 0x080a0a0c, 0x0c0d0e0a}, + {1, 1900, 0, 5, 9, 0x0a0b0c0e, 0x0f10120c}, + {1, 2140, 0, 4, 8, 0x090a0b0d, 0x0e0f110b}, {} }; diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c index d7a804d..5879198 100644 --- a/board/freescale/t208xqds/eth_t208xqds.c +++ b/board/freescale/t208xqds/eth_t208xqds.c @@ -416,6 +416,7 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC10, RGMII_PHY2_ADDR); switch (srds_s1) { + case 0x1b: case 0x1c: case 0x95: case 0xa2: @@ -429,8 +430,11 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR); break; + case 0x50: case 0x51: + case 0x5e: case 0x5f: + case 0x64: case 0x65: /* T2080QDS: XAUI/HiGig in Slot3; T2081QDS: in Slot2 */ fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); @@ -439,6 +443,7 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR); break; case 0x66: + case 0x67: /* * XFI does not need a PHY to work, but to avoid U-boot use * default PHY address which is zero to a MAC when it found @@ -453,6 +458,7 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_10GEC3, 6); fm_info_set_phy_address(FM1_10GEC4, 7); break; + case 0x6a: case 0x6b: fm_info_set_phy_address(FM1_10GEC1, 4); fm_info_set_phy_address(FM1_10GEC2, 5); @@ -470,6 +476,7 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); break; + case 0x70: case 0x71: /* SGMII in Slot3 */ fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); @@ -625,6 +632,7 @@ int board_eth_init(bd_t *bis) fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); if ((srds_s1 == 0x66) || (srds_s1 == 0x6b) || + (srds_s1 == 0x6a) || (srds_s1 == 0x70) || (srds_s1 == 0x6c) || (srds_s1 == 0x6d) || (srds_s1 == 0x71)) { /* As XFI is in cage intead of a slot, so diff --git a/board/freescale/t208xqds/t2080_rcw.cfg b/board/freescale/t208xqds/t2080_rcw.cfg index c2ad0fd..972dedc 100644 --- a/board/freescale/t208xqds/t2080_rcw.cfg +++ b/board/freescale/t208xqds/t2080_rcw.cfg @@ -3,6 +3,6 @@ aa55aa55 010e0100 #SerDes Protocol: 0x66_0x16 #Core/DDR: 1533Mhz/2133MT/s 12100017 15000000 00000000 00000000 -66160002 00008400 e8104000 c1000000 +66150002 00008400 e8104000 c1000000 00000000 00000000 00000000 000307fc 00000000 00000000 00000000 00000004 diff --git a/board/freescale/t208xqds/t208xqds.c b/board/freescale/t208xqds/t208xqds.c index 9cfc0bd..1353439 100644 --- a/board/freescale/t208xqds/t208xqds.c +++ b/board/freescale/t208xqds/t208xqds.c @@ -105,6 +105,7 @@ int brd_mux_lane_to_slot(void) /* SerDes1 is not enabled */ break; #if defined(CONFIG_T2080QDS) + case 0x1b: case 0x1c: case 0xa2: /* SD1(A:D) => SLOT3 SGMII @@ -126,6 +127,7 @@ int brd_mux_lane_to_slot(void) */ QIXIS_WRITE(brdcfg[12], 0x3a); break; + case 0x50: case 0x51: /* SD1(A:D) => SLOT3 XAUI * SD1(E) => SLOT1 PCIe4 @@ -140,6 +142,7 @@ int brd_mux_lane_to_slot(void) */ QIXIS_WRITE(brdcfg[12], 0xfe); break; + case 0x6a: case 0x6b: /* SD1(A:D) => XFI cage * SD1(E) => SLOT1 PCIe4 @@ -184,6 +187,7 @@ int brd_mux_lane_to_slot(void) QIXIS_WRITE(brdcfg[12], 0x1a); break; #elif defined(CONFIG_T2081QDS) + case 0x50: case 0x51: /* SD1(A:D) => SLOT2 XAUI * SD1(E) => SLOT1 PCIe4 x1 @@ -192,6 +196,7 @@ int brd_mux_lane_to_slot(void) QIXIS_WRITE(brdcfg[12], 0x98); QIXIS_WRITE(brdcfg[13], 0x70); break; + case 0x6a: case 0x6b: /* SD1(A:D) => XFI SFP Module * SD1(E) => SLOT1 PCIe4 x1 @@ -201,13 +206,6 @@ int brd_mux_lane_to_slot(void) QIXIS_WRITE(brdcfg[13], 0x70); break; case 0x6c: - /* SD1(A:B) => XFI SFP Module - * SD1(C:D) => SLOT2 SGMII - * SD1(E:H) => SLOT1 PCIe4 x4 - */ - QIXIS_WRITE(brdcfg[12], 0xe8); - QIXIS_WRITE(brdcfg[13], 0x0); - break; case 0x6d: /* SD1(A:B) => XFI SFP Module * SD1(C:D) => SLOT2 SGMII diff --git a/board/freescale/t208xrdb/t2080_rcw.cfg b/board/freescale/t208xrdb/t2080_rcw.cfg index cd62cc8..15e1bf4 100644 --- a/board/freescale/t208xrdb/t2080_rcw.cfg +++ b/board/freescale/t208xrdb/t2080_rcw.cfg @@ -3,6 +3,6 @@ aa55aa55 010e0100 #SerDes Protocol: 0x66_0x16 #Core/DDR: 1533Mhz/1600MT/s 120c0017 15000000 00000000 00000000 -66160002 00008400 ec104000 c1000000 +66150002 00008400 ec104000 c1000000 00000000 00000000 00000000 000307fc 00000000 00000000 00000000 00000004 diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c index 24cf907..6210e46 100644 --- a/board/freescale/t4qds/eth.c +++ b/board/freescale/t4qds/eth.c @@ -449,7 +449,9 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); fm_info_set_phy_address(FM1_10GEC2, FM1_10GEC2_PHY_ADDR); break; + case 27: case 28: + case 35: case 36: /* SGMII in Slot1 and Slot2 */ fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]); @@ -465,6 +467,7 @@ int board_eth_init(bd_t *bis) slot_qsgmii_phyaddr[1][2]); } break; + case 37: case 38: fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]); fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]); @@ -479,8 +482,11 @@ int board_eth_init(bd_t *bis) slot_qsgmii_phyaddr[1][3]); } break; + case 39: case 40: + case 45: case 46: + case 47: case 48: fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]); fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]); @@ -585,12 +591,17 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); fm_info_set_phy_address(FM2_10GEC2, FM2_10GEC2_PHY_ADDR); break; + case 6: case 7: + case 12: case 13: case 14: + case 15: case 16: + case 21: case 22: case 23: + case 24: case 25: case 26: /* XAUI/HiGig in Slot3, SGMII in Slot4 */ @@ -600,7 +611,9 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); break; + case 27: case 28: + case 35: case 36: /* SGMII in Slot3 and Slot4 */ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); @@ -612,6 +625,7 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]); fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]); break; + case 37: case 38: /* QSGMII in Slot3 and Slot4 */ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); @@ -623,8 +637,11 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][2]); fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][3]); break; + case 39: case 40: + case 45: case 46: + case 47: case 48: /* SGMII in Slot3 */ fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]); @@ -637,8 +654,11 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); break; + case 49: case 50: + case 51: case 52: + case 53: case 54: fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); diff --git a/board/freescale/t4qds/t4240qds.c b/board/freescale/t4qds/t4240qds.c index 79b770b..fe1bc7f 100644 --- a/board/freescale/t4qds/t4240qds.c +++ b/board/freescale/t4qds/t4240qds.c @@ -354,14 +354,18 @@ int config_frontside_crossbar_vsc3316(void) FSL_CORENET2_RCWSR4_SRDS1_PRTCL; srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; switch (srds_prtcl_s1) { + case 37: case 38: /* swap first lane and third lane on slot1 */ vsc3316_fsm1_tx[0][1] = 14; vsc3316_fsm1_tx[6][1] = 0; vsc3316_fsm1_rx[1][1] = 2; vsc3316_fsm1_rx[6][1] = 13; + case 39: case 40: + case 45: case 46: + case 47: case 48: /* swap first lane and third lane on slot2 */ vsc3316_fsm1_tx[2][1] = 8; @@ -382,17 +386,24 @@ int config_frontside_crossbar_vsc3316(void) FSL_CORENET2_RCWSR4_SRDS2_PRTCL; srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; switch (srds_prtcl_s2) { + case 37: case 38: /* swap first lane and third lane on slot3 */ vsc3316_fsm2_tx[2][1] = 11; vsc3316_fsm2_tx[5][1] = 4; vsc3316_fsm2_rx[2][1] = 9; vsc3316_fsm2_rx[4][1] = 7; + case 39: case 40: + case 45: case 46: + case 47: case 48: + case 49: case 50: + case 51: case 52: + case 53: case 54: /* swap first lane and third lane on slot4 */ vsc3316_fsm2_tx[6][1] = 3; @@ -425,6 +436,7 @@ int config_backside_crossbar_mux(void) case 0: /* SerDes3 is not enabled */ break; + case 1: case 2: case 9: case 10: @@ -434,13 +446,20 @@ int config_backside_crossbar_mux(void) brdcfg |= BRDCFG12_SD3MX_SLOT5; QIXIS_WRITE(brdcfg[12], brdcfg); break; + case 3: case 4: + case 5: case 6: + case 7: case 8: + case 11: case 12: + case 13: case 14: + case 15: case 16: case 17: + case 18: case 19: case 20: /* SD3(4:7) => SLOT6(0:3) */ @@ -462,6 +481,7 @@ int config_backside_crossbar_mux(void) case 0: /* SerDes4 is not enabled */ break; + case 1: case 2: /* 10b, SD4(0:7) => SLOT7(0:7) */ brdcfg = QIXIS_READ(brdcfg[12]); @@ -469,8 +489,11 @@ int config_backside_crossbar_mux(void) brdcfg |= BRDCFG12_SD4MX_SLOT7; QIXIS_WRITE(brdcfg[12], brdcfg); break; + case 3: case 4: + case 5: case 6: + case 7: case 8: /* x1b, SD4(4:7) => SLOT8(0:3) */ brdcfg = QIXIS_READ(brdcfg[12]); @@ -478,9 +501,13 @@ int config_backside_crossbar_mux(void) brdcfg |= BRDCFG12_SD4MX_SLOT8; QIXIS_WRITE(brdcfg[12], brdcfg); break; + case 9: case 10: + case 11: case 12: + case 13: case 14: + case 15: case 16: case 18: /* 00b, SD4(4:5) => AURORA, SD4(6:7) => SATA */ diff --git a/board/freescale/t4qds/t4_rcw.cfg b/board/freescale/t4qds/t4_rcw.cfg index 3e56817..6f09a7b 100644 --- a/board/freescale/t4qds/t4_rcw.cfg +++ b/board/freescale/t4qds/t4_rcw.cfg @@ -1,7 +1,7 @@ #PBL preamble and RCW header aa55aa55 010e0100 -#serdes protocol 1_28_6_12 +#serdes protocol 1_27_5_11 16070019 18101916 00000000 00000000 -04383060 30548c00 ec020000 f5000000 +04362858 30548c00 ec020000 f5000000 00000000 ee0000ee 00000000 000307fc 00000000 00000000 00000000 00000028 diff --git a/board/freescale/t4rdb/eth.c b/board/freescale/t4rdb/eth.c index d220475..142c6a8 100644 --- a/board/freescale/t4rdb/eth.c +++ b/board/freescale/t4rdb/eth.c @@ -67,7 +67,7 @@ int board_eth_init(bd_t *bis) /* Register the 10G MDIO bus */ fm_memac_mdio_init(bis, &tgec_mdio_info); - if (srds_prtcl_s1 == 28) { + if ((srds_prtcl_s1 == 28) || (srds_prtcl_s1 == 27)) { /* SGMII */ fm_info_set_phy_address(FM1_DTSEC1, SGMII_PHY_ADDR1); fm_info_set_phy_address(FM1_DTSEC2, SGMII_PHY_ADDR2); diff --git a/board/freescale/t4rdb/t4_rcw.cfg b/board/freescale/t4rdb/t4_rcw.cfg index 13408bd..fdbbe5e 100644 --- a/board/freescale/t4rdb/t4_rcw.cfg +++ b/board/freescale/t4rdb/t4_rcw.cfg @@ -1,7 +1,7 @@ #PBL preamble and RCW header aa55aa55 010e0100 -#serdes protocol 28_56_2_10 +#serdes protocol 27_56_1_9 16070019 18101916 00000000 00000000 -70701050 00448c00 6c020000 f5000000 +6c700848 00448c00 6c020000 f5000000 00000000 ee0000ee 00000000 000287fc 00000000 50000000 00000000 00000028 diff --git a/board/freescale/vf610twr/vf610twr.c b/board/freescale/vf610twr/vf610twr.c index d64d3aa..54a9f2c 100644 --- a/board/freescale/vf610twr/vf610twr.c +++ b/board/freescale/vf610twr/vf610twr.c @@ -278,6 +278,26 @@ static void setup_iomux_i2c(void) imx_iomux_v3_setup_multiple_pads(i2c0_pads, ARRAY_SIZE(i2c0_pads)); } +static void setup_iomux_qspi(void) +{ + static const iomux_v3_cfg_t qspi0_pads[] = { + VF610_PAD_PTD0__QSPI0_A_QSCK, + VF610_PAD_PTD1__QSPI0_A_CS0, + VF610_PAD_PTD2__QSPI0_A_DATA3, + VF610_PAD_PTD3__QSPI0_A_DATA2, + VF610_PAD_PTD4__QSPI0_A_DATA1, + VF610_PAD_PTD5__QSPI0_A_DATA0, + VF610_PAD_PTD7__QSPI0_B_QSCK, + VF610_PAD_PTD8__QSPI0_B_CS0, + VF610_PAD_PTD9__QSPI0_B_DATA3, + VF610_PAD_PTD10__QSPI0_B_DATA2, + VF610_PAD_PTD11__QSPI0_B_DATA1, + VF610_PAD_PTD12__QSPI0_B_DATA0, + }; + + imx_iomux_v3_setup_multiple_pads(qspi0_pads, ARRAY_SIZE(qspi0_pads)); +} + #ifdef CONFIG_FSL_ESDHC struct fsl_esdhc_cfg esdhc_cfg[1] = { {ESDHC1_BASE_ADDR}, @@ -321,7 +341,8 @@ static void clock_init(void) clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK, CCM_CCGR2_IOMUXC_CTRL_MASK | CCM_CCGR2_PORTA_CTRL_MASK | CCM_CCGR2_PORTB_CTRL_MASK | CCM_CCGR2_PORTC_CTRL_MASK | - CCM_CCGR2_PORTD_CTRL_MASK | CCM_CCGR2_PORTE_CTRL_MASK); + CCM_CCGR2_PORTD_CTRL_MASK | CCM_CCGR2_PORTE_CTRL_MASK | + CCM_CCGR2_QSPI0_CTRL_MASK); clrsetbits_le32(&ccm->ccgr3, CCM_REG_CTRL_MASK, CCM_CCGR3_ANADIG_CTRL_MASK); clrsetbits_le32(&ccm->ccgr4, CCM_REG_CTRL_MASK, @@ -352,11 +373,14 @@ static void clock_init(void) CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) | CCM_CACRR_ARM_CLK_DIV(0)); clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK, - CCM_CSCMR1_ESDHC1_CLK_SEL(3)); + CCM_CSCMR1_ESDHC1_CLK_SEL(3) | CCM_CSCMR1_QSPI0_CLK_SEL(3)); clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK, CCM_CSCDR1_RMII_CLK_EN); clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK, CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0)); + clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK, + CCM_CSCDR3_QSPI0_EN | CCM_CSCDR3_QSPI0_DIV(1) | + CCM_CSCDR3_QSPI0_X2_DIV(1) | CCM_CSCDR3_QSPI0_X4_DIV(3)); clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK, CCM_CSCMR2_RMII_CLK_SEL(0)); } @@ -386,6 +410,7 @@ int board_early_init_f(void) setup_iomux_uart(); setup_iomux_enet(); setup_iomux_i2c(); + setup_iomux_qspi(); return 0; } |