summaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/b4860qds/b4860qds.c6
-rw-r--r--board/freescale/b4860qds/b4860qds_crossbar_con.h31
-rw-r--r--board/freescale/b4860qds/ddr.c72
-rw-r--r--board/freescale/b4860qds/eth_b4860qds.c35
-rw-r--r--board/freescale/b4860qds/law.c6
-rw-r--r--board/freescale/b4860qds/tlb.c2
-rw-r--r--board/freescale/common/qixis.h6
-rw-r--r--board/freescale/corenet_ds/eth_superhydra.c8
-rw-r--r--board/freescale/corenet_ds/pbi.cfg2
-rw-r--r--board/freescale/corenet_ds/rcw_p5040ds.cfg11
-rw-r--r--board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg2
-rw-r--r--board/freescale/mx25pdk/imximage.cfg2
-rw-r--r--board/freescale/mx31ads/u-boot.lds20
-rw-r--r--board/freescale/mx31pdk/mx31pdk.c16
-rw-r--r--board/freescale/mx51evk/imximage.cfg2
-rw-r--r--board/freescale/mx53ard/imximage_dd3.cfg2
-rw-r--r--board/freescale/mx53evk/imximage.cfg2
-rw-r--r--board/freescale/mx53loco/imximage.cfg2
-rw-r--r--board/freescale/mx53smd/imximage.cfg2
-rw-r--r--board/freescale/mx6qarm2/imximage.cfg2
-rw-r--r--board/freescale/mx6qsabreauto/imximage.cfg2
-rw-r--r--board/freescale/p2041rdb/p2041rdb.c11
-rw-r--r--board/freescale/t4qds/ddr.c56
-rw-r--r--board/freescale/t4qds/eth.c371
-rw-r--r--board/freescale/t4qds/law.c3
-rw-r--r--board/freescale/t4qds/t4240qds_qixis.h2
-rw-r--r--board/freescale/t4qds/t4_pbi.cfg36
-rw-r--r--board/freescale/t4qds/t4_rcw.cfg7
-rw-r--r--board/freescale/t4qds/t4qds.c405
-rw-r--r--board/freescale/t4qds/tlb.c2
30 files changed, 989 insertions, 137 deletions
diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c
index 41887c2..a39c17a 100644
--- a/board/freescale/b4860qds/b4860qds.c
+++ b/board/freescale/b4860qds/b4860qds.c
@@ -166,11 +166,13 @@ int configure_vsc3316_3308(void)
ret = select_i2c_ch_pca(I2C_CH_VSC3316);
if (!ret) {
ret = vsc3316_config(VSC3316_TX_ADDRESS,
- vsc16_tx_sgmii_lane_ab, num_vsc16_con);
+ vsc16_tx_4sfp_sgmii_12_56,
+ num_vsc16_con);
if (ret)
return ret;
ret = vsc3316_config(VSC3316_RX_ADDRESS,
- vsc16_rx_sgmii_lane_ab, num_vsc16_con);
+ vsc16_rx_4sfp_sgmii_12_56,
+ num_vsc16_con);
if (ret)
return ret;
} else {
diff --git a/board/freescale/b4860qds/b4860qds_crossbar_con.h b/board/freescale/b4860qds/b4860qds_crossbar_con.h
index 994dec5..c2b6c44 100644
--- a/board/freescale/b4860qds/b4860qds_crossbar_con.h
+++ b/board/freescale/b4860qds/b4860qds_crossbar_con.h
@@ -26,42 +26,53 @@
static const int8_t vsc16_tx_amc[8][2] = { {15, 3}, {0, 2}, {7, 4}, {9, 10},
{5, 11}, {4, 5}, {2, 6}, {12, 9} };
-static const int8_t vsc16_tx_sfp[8][2] = { {15, 8}, {0, 0}, {7, 7}, {9, 1},
- {5, 15}, {4, 14}, {2, 12}, {12, 13} };
+static const int8_t vsc16_tx_sfp[8][2] = { {15, 7}, {0, 1}, {7, 8}, {9, 0},
+ {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
-static const int8_t vsc16_tx_sgmii_lane_ab[8][2] = { {2, 14}, {12, 15},
- {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+static const int8_t vsc16_tx_4sfp_sgmii_12_56[8][2] = { {15, 7}, {0, 1},
+ {7, 8}, {9, 0}, {2, 14}, {12, 15},
+ {-1, -1}, {-1, -1} };
+
+static const int8_t vsc16_tx_4sfp_sgmii_34[8][2] = { {15, 7}, {0, 1},
+ {7, 8}, {9, 0}, {5, 14}, {4, 15},
+ {-1, -1}, {-1, -1} };
#ifdef CONFIG_PPC_B4420
static const int8_t vsc16_tx_sgmii_lane_cd[8][2] = { {5, 14}, {4, 15},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
#endif
+
static const int8_t vsc16_tx_aurora[8][2] = { {2, 13}, {12, 12}, {-1, -1},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
static const int8_t vsc16_rx_amc[8][2] = { {3, 15}, {2, 1}, {4, 8}, {10, 9},
{11, 11}, {5, 10}, {6, 3}, {9, 12} };
-static const int8_t vsc16_rx_sfp[8][2] = { {0, 15}, {8, 1}, {1, 8}, {7, 9},
+static const int8_t vsc16_rx_sfp[8][2] = { {8, 15}, {0, 1}, {7, 8}, {1, 9},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
-static const int8_t vsc16_rx_sgmii_lane_ab[8][2] = { {14, 3}, {15, 12},
- {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+static const int8_t vsc16_rx_4sfp_sgmii_12_56[8][2] = { {8, 15}, {0, 1},
+ {7, 8}, {1, 9}, {14, 3}, {15, 12},
+ {-1, -1}, {-1, -1} };
+
+static const int8_t vsc16_rx_4sfp_sgmii_34[8][2] = { {8, 15}, {0, 1},
+ {7, 8}, {1, 9}, {14, 11}, {15, 10},
+ {-1, -1}, {-1, -1} };
#ifdef CONFIG_PPC_B4420
static const int8_t vsc16_rx_sgmii_lane_cd[8][2] = { {14, 11}, {15, 10},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
#endif
-static const int8_t vsc16_rx_aurora[8][2] = { {12, 3}, {13, 12}, {-1, -1},
+static const int8_t vsc16_rx_aurora[8][2] = { {13, 3}, {12, 12}, {-1, -1},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
static const int8_t vsc08_tx_amc[4][2] = { {2, 2}, {3, 3}, {7, 4}, {1, 5} };
-static const int8_t vsc08_tx_sfp[4][2] = { {2, 6}, {3, 7}, {7, 1}, {1, 0} };
+static const int8_t vsc08_tx_sfp[4][2] = { {2, 1}, {3, 0}, {7, 6}, {1, 7} };
static const int8_t vsc08_rx_amc[4][2] = { {2, 3}, {3, 4}, {4, 7}, {5, 1} };
-static const int8_t vsc08_rx_sfp[4][2] = { {6, 3}, {7, 4}, {1, 7}, {0, 1} };
+static const int8_t vsc08_rx_sfp[4][2] = { {1, 3}, {0, 4}, {6, 7}, {7, 1} };
#endif
diff --git a/board/freescale/b4860qds/ddr.c b/board/freescale/b4860qds/ddr.c
index dd4c0f6..b82b3d4 100644
--- a/board/freescale/b4860qds/ddr.c
+++ b/board/freescale/b4860qds/ddr.c
@@ -13,6 +13,7 @@
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_ddr_dimm_params.h>
#include <asm/fsl_law.h>
+#include <../arch/powerpc/cpu/mpc8xxx/ddr/ddr.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -188,3 +189,74 @@ phys_size_t initdram(int board_type)
puts(" DDR: ");
return dram_size;
}
+
+unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo,
+ unsigned int dbw_cap_adj[])
+{
+ int i, j;
+ unsigned long long total_mem, current_mem_base, total_ctlr_mem;
+ unsigned long long rank_density, ctlr_density = 0;
+
+ current_mem_base = 0ull;
+ total_mem = 0;
+ /*
+ * This board has soldered DDR chips. DDRC1 has two rank.
+ * DDRC2 has only one rank.
+ * Assigning DDRC2 to lower address and DDRC1 to higher address.
+ */
+ if (pinfo->memctl_opts[0].memctl_interleaving) {
+ rank_density = pinfo->dimm_params[0][0].rank_density >>
+ dbw_cap_adj[0];
+ ctlr_density = rank_density;
+
+ debug("rank density is 0x%llx, ctlr density is 0x%llx\n",
+ rank_density, ctlr_density);
+ for (i = CONFIG_NUM_DDR_CONTROLLERS - 1; i >= 0; i--) {
+ switch (pinfo->memctl_opts[i].memctl_interleaving_mode) {
+ case FSL_DDR_CACHE_LINE_INTERLEAVING:
+ case FSL_DDR_PAGE_INTERLEAVING:
+ case FSL_DDR_BANK_INTERLEAVING:
+ case FSL_DDR_SUPERBANK_INTERLEAVING:
+ total_ctlr_mem = 2 * ctlr_density;
+ break;
+ default:
+ panic("Unknown interleaving mode");
+ }
+ pinfo->common_timing_params[i].base_address =
+ current_mem_base;
+ pinfo->common_timing_params[i].total_mem =
+ total_ctlr_mem;
+ total_mem = current_mem_base + total_ctlr_mem;
+ debug("ctrl %d base 0x%llx\n", i, current_mem_base);
+ debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
+ }
+ } else {
+ /*
+ * Simple linear assignment if memory
+ * controllers are not interleaved.
+ */
+ for (i = CONFIG_NUM_DDR_CONTROLLERS - 1; i >= 0; i--) {
+ total_ctlr_mem = 0;
+ pinfo->common_timing_params[i].base_address =
+ current_mem_base;
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ /* Compute DIMM base addresses. */
+ unsigned long long cap =
+ pinfo->dimm_params[i][j].capacity;
+ pinfo->dimm_params[i][j].base_address =
+ current_mem_base;
+ debug("ctrl %d dimm %d base 0x%llx\n",
+ i, j, current_mem_base);
+ current_mem_base += cap;
+ total_ctlr_mem += cap;
+ }
+ debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
+ pinfo->common_timing_params[i].total_mem =
+ total_ctlr_mem;
+ total_mem += total_ctlr_mem;
+ }
+ }
+ debug("Total mem by %s is 0x%llx\n", __func__, total_mem);
+
+ return total_mem;
+}
diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c
index 68e2725..3bcda6d 100644
--- a/board/freescale/b4860qds/eth_b4860qds.c
+++ b/board/freescale/b4860qds/eth_b4860qds.c
@@ -275,6 +275,24 @@ int board_eth_init(bd_t *bis)
fm_info_set_phy_address(FM1_DTSEC4,
CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
break;
+ case 0x98:
+ /* XAUI in Slot1 and Slot2 */
+ debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC1: %x\n",
+ CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_10GEC1,
+ CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
+ debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n",
+ CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_10GEC2,
+ CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
+ break;
+ case 0x9E:
+ /* XAUI in Slot2 */
+ debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n",
+ CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_10GEC2,
+ CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
+ break;
default:
printf("Fman: Unsupported SerDes2 Protocol 0x%02x\n",
serdes2_prtcl);
@@ -300,6 +318,23 @@ int board_eth_init(bd_t *bis)
}
}
+ for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+ int idx = i - FM1_10GEC1;
+
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_XGMII:
+ fm_info_set_mdio(i,
+ miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME));
+ break;
+ default:
+ printf("Fman1: 10GSEC%u set to unknown interface %i\n",
+ idx + 1, fm_info_get_enet_if(i));
+ fm_info_set_phy_address(i, 0);
+ break;
+ }
+ }
+
+
cpu_eth_init(bis);
#endif
diff --git a/board/freescale/b4860qds/law.c b/board/freescale/b4860qds/law.c
index 4142e01..b26725b 100644
--- a/board/freescale/b4860qds/law.c
+++ b/board/freescale/b4860qds/law.c
@@ -33,8 +33,12 @@ struct law_entry law_table[] = {
SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
#endif
SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_MAPLE_MEM_PHYS
+ SET_LAW(CONFIG_SYS_MAPLE_MEM_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_MAPLE),
+#endif
#ifdef CONFIG_SYS_DCSRBAR_PHYS
- SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
+ /* Limit DCSR to 32M to access NPC Trace Buffer */
+ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
#endif
#ifdef CONFIG_SYS_NAND_BASE_PHYS
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
diff --git a/board/freescale/b4860qds/tlb.c b/board/freescale/b4860qds/tlb.c
index 6d634bf..29cc41b 100644
--- a/board/freescale/b4860qds/tlb.c
+++ b/board/freescale/b4860qds/tlb.c
@@ -106,7 +106,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
#ifdef CONFIG_SYS_DCSRBAR_PHYS
SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 10, BOOKE_PAGESZ_4M, 1),
+ 0, 10, BOOKE_PAGESZ_32M, 1),
#endif
#ifdef CONFIG_SYS_NAND_BASE
/*
diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h
index 8d914d5..2cf8738 100644
--- a/board/freescale/common/qixis.h
+++ b/board/freescale/common/qixis.h
@@ -78,7 +78,11 @@ struct qixis {
u8 trig_stat;
u8 res12[3];
u8 trig_ctr[4];
- u8 res13[48];
+ u8 res13[16];
+ u8 clk_freq[6]; /* Clock Measurement Registers */
+ u8 res_c6[8];
+ u8 clk_base[2]; /* Clock Frequency Base Reg */
+ u8 res_d0[16];
u8 aux2[4]; /* Auxiliary Registers,0xE0 */
u8 res14[10];
u8 aux_ad;
diff --git a/board/freescale/corenet_ds/eth_superhydra.c b/board/freescale/corenet_ds/eth_superhydra.c
index ef9de25..ae07073 100644
--- a/board/freescale/corenet_ds/eth_superhydra.c
+++ b/board/freescale/corenet_ds/eth_superhydra.c
@@ -605,8 +605,8 @@ int board_eth_init(bd_t *bis)
lane = serdes_get_first_lane(XAUI_FM1);
if (lane >= 0) {
debug("FM1@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]);
- mdio_mux[FM1_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK;
- mdio_mux[FM1_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT2;
+ mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK;
+ mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT2;
super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_TGEC_MDIO",
mdio_mux[i].mask, mdio_mux[i].val);
}
@@ -704,8 +704,8 @@ int board_eth_init(bd_t *bis)
lane = serdes_get_first_lane(XAUI_FM2);
if (lane >= 0) {
debug("FM2@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]);
- mdio_mux[FM2_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK;
- mdio_mux[FM2_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT1;
+ mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK;
+ mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT1;
super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_TGEC_MDIO",
mdio_mux[i].mask, mdio_mux[i].val);
}
diff --git a/board/freescale/corenet_ds/pbi.cfg b/board/freescale/corenet_ds/pbi.cfg
index 50806ca..af1ebd6 100644
--- a/board/freescale/corenet_ds/pbi.cfg
+++ b/board/freescale/corenet_ds/pbi.cfg
@@ -19,7 +19,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.pblimage for more details about how-to configure
+# Refer doc/README.pblimage for more details about how-to configure
# and create PBL boot image
#
diff --git a/board/freescale/corenet_ds/rcw_p5040ds.cfg b/board/freescale/corenet_ds/rcw_p5040ds.cfg
new file mode 100644
index 0000000..82fa741
--- /dev/null
+++ b/board/freescale/corenet_ds/rcw_p5040ds.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for P5040DS.
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+0c580000 00000000 22121200 00000000
+089c4400 00283000 58000000 61000000
+00000000 00000000 00000000 10070000
+00000000 00000000 00000000 00000000
diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
index 996d788..bae5c23 100644
--- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
@@ -20,7 +20,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx25pdk/imximage.cfg b/board/freescale/mx25pdk/imximage.cfg
index c42a283..8cc8bde 100644
--- a/board/freescale/mx25pdk/imximage.cfg
+++ b/board/freescale/mx25pdk/imximage.cfg
@@ -15,7 +15,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds
index 4969960..963d29f 100644
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@ -34,6 +34,7 @@ SECTIONS
. = ALIGN(4);
.text :
{
+ *(.__image_copy_start)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
@@ -65,17 +66,23 @@ SECTIONS
. = ALIGN(4);
- __image_copy_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
+
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
.rel.dyn : {
- __rel_dyn_start = .;
*(.rel*)
- __rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
}
_end = .;
@@ -100,6 +107,7 @@ SECTIONS
}
/DISCARD/ : { *(.bss*) }
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynsym*) }
/DISCARD/ : { *(.dynamic*) }
diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c
index 49158bd..4f6cfee 100644
--- a/board/freescale/mx31pdk/mx31pdk.c
+++ b/board/freescale/mx31pdk/mx31pdk.c
@@ -39,7 +39,21 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPL_BUILD
void board_init_f(ulong bootflag)
{
- relocate_code(CONFIG_SPL_TEXT_BASE);
+ /*
+ * copy ourselves from where we are running to where we were
+ * linked at. Use ulong pointers as all addresses involved
+ * are 4-byte-aligned.
+ */
+ ulong *start_ptr, *end_ptr, *link_ptr, *run_ptr, *dst;
+ asm volatile ("ldr %0, =_start" : "=r"(start_ptr));
+ asm volatile ("ldr %0, =_end" : "=r"(end_ptr));
+ asm volatile ("ldr %0, =board_init_f" : "=r"(link_ptr));
+ asm volatile ("adr %0, board_init_f" : "=r"(run_ptr));
+ for (dst = start_ptr; dst < end_ptr; dst++)
+ *dst = *(dst+(run_ptr-link_ptr));
+ /*
+ * branch to nand_boot's link-time address.
+ */
asm volatile("ldr pc, =nand_boot");
}
#endif
diff --git a/board/freescale/mx51evk/imximage.cfg b/board/freescale/mx51evk/imximage.cfg
index 3e141ee..aaa490a 100644
--- a/board/freescale/mx51evk/imximage.cfg
+++ b/board/freescale/mx51evk/imximage.cfg
@@ -20,7 +20,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx53ard/imximage_dd3.cfg b/board/freescale/mx53ard/imximage_dd3.cfg
index 4633e4d..a103d95 100644
--- a/board/freescale/mx53ard/imximage_dd3.cfg
+++ b/board/freescale/mx53ard/imximage_dd3.cfg
@@ -20,7 +20,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx53evk/imximage.cfg b/board/freescale/mx53evk/imximage.cfg
index 1cd61d5..c1cfdda 100644
--- a/board/freescale/mx53evk/imximage.cfg
+++ b/board/freescale/mx53evk/imximage.cfg
@@ -20,7 +20,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx53loco/imximage.cfg b/board/freescale/mx53loco/imximage.cfg
index e6b90c1..2f75ad0 100644
--- a/board/freescale/mx53loco/imximage.cfg
+++ b/board/freescale/mx53loco/imximage.cfg
@@ -20,7 +20,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx53smd/imximage.cfg b/board/freescale/mx53smd/imximage.cfg
index 4633e4d..a103d95 100644
--- a/board/freescale/mx53smd/imximage.cfg
+++ b/board/freescale/mx53smd/imximage.cfg
@@ -20,7 +20,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx6qarm2/imximage.cfg b/board/freescale/mx6qarm2/imximage.cfg
index 4ed211e..6f18b37 100644
--- a/board/freescale/mx6qarm2/imximage.cfg
+++ b/board/freescale/mx6qarm2/imximage.cfg
@@ -20,7 +20,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx6qsabreauto/imximage.cfg b/board/freescale/mx6qsabreauto/imximage.cfg
index bbff813..e720c6b 100644
--- a/board/freescale/mx6qsabreauto/imximage.cfg
+++ b/board/freescale/mx6qsabreauto/imximage.cfg
@@ -19,7 +19,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c
index a706a6d..44d3e0c 100644
--- a/board/freescale/p2041rdb/p2041rdb.c
+++ b/board/freescale/p2041rdb/p2041rdb.c
@@ -227,6 +227,17 @@ int misc_init_r(void)
"'00' is unsupported\n");
else
actual[i] = freq[i][clock];
+
+ /*
+ * PC board uses a different CPLD with PB board, this CPLD
+ * has cpld_ver_sub = 1, and pcba_ver = 5. But CPLD on PB
+ * board has cpld_ver_sub = 0, and pcba_ver = 4.
+ */
+ if ((i == 1) && (CPLD_READ(cpld_ver_sub) == 1) &&
+ (CPLD_READ(pcba_ver) == 5)) {
+ /* PC board bank2 frequency */
+ actual[i] = freq[i-1][clock];
+ }
}
for (i = 0; i < NUM_SRDS_BANKS; i++) {
diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c
index 692616a..058d625 100644
--- a/board/freescale/t4qds/ddr.c
+++ b/board/freescale/t4qds/ddr.c
@@ -19,6 +19,7 @@ DECLARE_GLOBAL_DATA_PTR;
struct board_specific_parameters {
u32 n_ranks;
u32 datarate_mhz_high;
+ u32 rank_gb;
u32 clk_adjust;
u32 wrlvl_start;
u32 wrlvl_ctl_2;
@@ -36,16 +37,19 @@ struct board_specific_parameters {
static const struct board_specific_parameters udimm0[] = {
/*
* memory controller 0
- * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
- * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay |
+ * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
+ * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
*/
- {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0},
- {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
- {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
- {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
- {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
- {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
- {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
+ {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
+ {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0},
+ {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0},
+ {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0},
+ {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0},
+ {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0},
+ {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
+ {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
+ {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
+ {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
{}
};
@@ -61,19 +65,19 @@ static const struct board_specific_parameters *udimms[] = {
static const struct board_specific_parameters rdimm0[] = {
/*
* memory controller 0
- * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
- * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay |
+ * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
+ * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
*/
- {4, 1350, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0},
- {4, 1666, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0},
- {4, 2140, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0},
- {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0},
- {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
- {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
- {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
- {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
- {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
- {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
+ {4, 1350, 0, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0},
+ {4, 1666, 0, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0},
+ {4, 2140, 0, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0},
+ {2, 1350, 0, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0},
+ {2, 1666, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
+ {2, 2140, 0, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
+ {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
+ {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
+ {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
+ {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
{}
};
@@ -113,7 +117,8 @@ void fsl_ddr_board_options(memctl_options_t *popts,
*/
ddr_freq = get_ddr_freq(0) / 1000000;
while (pbsp->datarate_mhz_high) {
- if (pbsp->n_ranks == pdimm->n_ranks) {
+ if (pbsp->n_ranks == pdimm->n_ranks &&
+ (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
if (ddr_freq <= pbsp->datarate_mhz_high) {
popts->cpo_override = pbsp->cpo;
popts->write_data_delay =
@@ -146,6 +151,13 @@ void fsl_ddr_board_options(memctl_options_t *popts,
panic("DIMM is not supported by this board");
}
found:
+ debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
+ "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, "
+ "wrlvl_ctrl_3 0x%x\n",
+ pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
+ pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
+ pbsp->wrlvl_ctl_3);
+
/*
* Factors to consider for half-strength driver enable:
* - number of DIMMs installed
diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c
index a49c7d4..7103a0d 100644
--- a/board/freescale/t4qds/eth.c
+++ b/board/freescale/t4qds/eth.c
@@ -52,7 +52,7 @@
#define EMI1_SLOT4 4
#define EMI1_SLOT5 5
#define EMI1_SLOT7 7
-#define EMI2 8 /* tmp, FIXME */
+#define EMI2 8
/* Slot6 and Slot8 do not have EMI connections */
static int mdio_mux[NUM_FM_PORTS];
@@ -71,6 +71,14 @@ static const char *mdio_names[] = {
static u8 lane_to_slot_fsm1[] = {1, 1, 1, 1, 2, 2, 2, 2};
static u8 lane_to_slot_fsm2[] = {3, 3, 3, 3, 4, 4, 4, 4};
+static u8 slot_qsgmii_phyaddr[5][4] = {
+ {0, 0, 0, 0},/* not used, to make index match slot No. */
+ {0, 1, 2, 3},
+ {4, 5, 6, 7},
+ {8, 9, 0xa, 0xb},
+ {0xc, 0xd, 0xe, 0xf},
+};
+static u8 qsgmiiphy_fix[NUM_FM_PORTS] = {0};
static const char *t4240qds_mdio_name_for_muxval(u8 muxval)
{
@@ -180,21 +188,228 @@ static int t4240qds_mdio_init(char *realbusname, u8 muxval)
void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
enum fm_port port, int offset)
{
- if (mdio_mux[port] == EMI1_RGMII)
- fdt_set_phy_handle(blob, prop, pa, "phy_rgmii");
-
- /* TODO: will do with dts */
+ if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
+ switch (port) {
+ case FM1_DTSEC1:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy21");
+ break;
+ case FM1_DTSEC2:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy22");
+ break;
+ case FM1_DTSEC3:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy23");
+ break;
+ case FM1_DTSEC4:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy24");
+ break;
+ case FM1_DTSEC6:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy12");
+ break;
+ case FM1_DTSEC9:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy14");
+ else
+ fdt_set_phy_handle(blob, prop, pa,
+ "phy_sgmii4");
+ break;
+ case FM1_DTSEC10:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy13");
+ else
+ fdt_set_phy_handle(blob, prop, pa,
+ "phy_sgmii3");
+ break;
+ case FM2_DTSEC1:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy41");
+ break;
+ case FM2_DTSEC2:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy42");
+ break;
+ case FM2_DTSEC3:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy43");
+ break;
+ case FM2_DTSEC4:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy44");
+ break;
+ case FM2_DTSEC6:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy32");
+ break;
+ case FM2_DTSEC9:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy34");
+ else
+ fdt_set_phy_handle(blob, prop, pa,
+ "phy_sgmii12");
+ break;
+ case FM2_DTSEC10:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy33");
+ else
+ fdt_set_phy_handle(blob, prop, pa,
+ "phy_sgmii11");
+ break;
+ default:
+ break;
+ }
+ }
}
void fdt_fixup_board_enet(void *fdt)
{
- /* TODO: will do with dts */
+ int i;
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 prtcl2 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+
+ prtcl2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+ for (i = FM1_DTSEC1; i < NUM_FM_PORTS; i++) {
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ switch (mdio_mux[i]) {
+ case EMI1_SLOT1:
+ fdt_status_okay_by_alias(fdt, "emi1_slot1");
+ break;
+ case EMI1_SLOT2:
+ fdt_status_okay_by_alias(fdt, "emi1_slot2");
+ break;
+ case EMI1_SLOT3:
+ fdt_status_okay_by_alias(fdt, "emi1_slot3");
+ break;
+ case EMI1_SLOT4:
+ fdt_status_okay_by_alias(fdt, "emi1_slot4");
+ break;
+ default:
+ break;
+ }
+ break;
+ case PHY_INTERFACE_MODE_XGMII:
+ /* check if it's XFI interface for 10g */
+ if ((prtcl2 == 56) || (prtcl2 == 57)) {
+ fdt_status_okay_by_alias(fdt, "emi2_xfislot3");
+ break;
+ }
+ switch (i) {
+ case FM1_10GEC1:
+ fdt_status_okay_by_alias(fdt, "emi2_xauislot1");
+ break;
+ case FM1_10GEC2:
+ fdt_status_okay_by_alias(fdt, "emi2_xauislot2");
+ break;
+ case FM2_10GEC1:
+ fdt_status_okay_by_alias(fdt, "emi2_xauislot3");
+ break;
+ case FM2_10GEC2:
+ fdt_status_okay_by_alias(fdt, "emi2_xauislot4");
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+static void initialize_qsgmiiphy_fix(void)
+{
+ int i;
+ unsigned short reg;
+
+ for (i = 1; i <= 4; i++) {
+ /*
+ * Try to read if a SGMII card is used, we do it slot by slot.
+ * if a SGMII PHY address is valid on a slot, then we mark
+ * all ports on the slot, then fix the PHY address for the
+ * marked port when doing dtb fixup.
+ */
+ if (miiphy_read(mdio_names[i],
+ SGMII_CARD_PORT1_PHY_ADDR, MII_PHYSID2, &reg) != 0) {
+ debug("Slot%d PHY ID register 2 read failed\n", i);
+ continue;
+ }
+
+ debug("Slot%d MII_PHYSID2 @ 0x1c= 0x%04x\n", i, reg);
+
+ if (reg == 0xFFFF) {
+ /* No physical device present at this address */
+ continue;
+ }
+
+ switch (i) {
+ case 1:
+ qsgmiiphy_fix[FM1_DTSEC5] = 1;
+ qsgmiiphy_fix[FM1_DTSEC6] = 1;
+ qsgmiiphy_fix[FM1_DTSEC9] = 1;
+ qsgmiiphy_fix[FM1_DTSEC10] = 1;
+ slot_qsgmii_phyaddr[1][0] = SGMII_CARD_PORT1_PHY_ADDR;
+ slot_qsgmii_phyaddr[1][1] = SGMII_CARD_PORT2_PHY_ADDR;
+ slot_qsgmii_phyaddr[1][2] = SGMII_CARD_PORT3_PHY_ADDR;
+ slot_qsgmii_phyaddr[1][3] = SGMII_CARD_PORT4_PHY_ADDR;
+ break;
+ case 2:
+ qsgmiiphy_fix[FM1_DTSEC1] = 1;
+ qsgmiiphy_fix[FM1_DTSEC2] = 1;
+ qsgmiiphy_fix[FM1_DTSEC3] = 1;
+ qsgmiiphy_fix[FM1_DTSEC4] = 1;
+ slot_qsgmii_phyaddr[2][0] = SGMII_CARD_PORT1_PHY_ADDR;
+ slot_qsgmii_phyaddr[2][1] = SGMII_CARD_PORT2_PHY_ADDR;
+ slot_qsgmii_phyaddr[2][2] = SGMII_CARD_PORT3_PHY_ADDR;
+ slot_qsgmii_phyaddr[2][3] = SGMII_CARD_PORT4_PHY_ADDR;
+ break;
+ case 3:
+ qsgmiiphy_fix[FM2_DTSEC5] = 1;
+ qsgmiiphy_fix[FM2_DTSEC6] = 1;
+ qsgmiiphy_fix[FM2_DTSEC9] = 1;
+ qsgmiiphy_fix[FM2_DTSEC10] = 1;
+ slot_qsgmii_phyaddr[3][0] = SGMII_CARD_PORT1_PHY_ADDR;
+ slot_qsgmii_phyaddr[3][1] = SGMII_CARD_PORT2_PHY_ADDR;
+ slot_qsgmii_phyaddr[3][2] = SGMII_CARD_PORT3_PHY_ADDR;
+ slot_qsgmii_phyaddr[3][3] = SGMII_CARD_PORT4_PHY_ADDR;
+ break;
+ case 4:
+ qsgmiiphy_fix[FM2_DTSEC1] = 1;
+ qsgmiiphy_fix[FM2_DTSEC2] = 1;
+ qsgmiiphy_fix[FM2_DTSEC3] = 1;
+ qsgmiiphy_fix[FM2_DTSEC4] = 1;
+ slot_qsgmii_phyaddr[4][0] = SGMII_CARD_PORT1_PHY_ADDR;
+ slot_qsgmii_phyaddr[4][1] = SGMII_CARD_PORT2_PHY_ADDR;
+ slot_qsgmii_phyaddr[4][2] = SGMII_CARD_PORT3_PHY_ADDR;
+ slot_qsgmii_phyaddr[4][3] = SGMII_CARD_PORT4_PHY_ADDR;
+ break;
+ default:
+ break;
+ }
+ }
}
int board_eth_init(bd_t *bis)
{
#if defined(CONFIG_FMAN_ENET)
- int i;
+ int i, idx, lane, slot;
struct memac_mdio_info dtsec_mdio_info;
struct memac_mdio_info tgec_mdio_info;
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -236,6 +451,7 @@ int board_eth_init(bd_t *bis)
t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
t4240qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
+ initialize_qsgmiiphy_fix();
switch (srds_prtcl_s1) {
case 1:
@@ -248,44 +464,48 @@ int board_eth_init(bd_t *bis)
case 28:
case 36:
/* SGMII in Slot1 and Slot2 */
- fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]);
+ fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]);
+ fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]);
+ fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]);
+ fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]);
+ fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]);
if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
fm_info_set_phy_address(FM1_DTSEC9,
- SGMII_CARD_PORT4_PHY_ADDR);
+ slot_qsgmii_phyaddr[1][3]);
fm_info_set_phy_address(FM1_DTSEC10,
- SGMII_CARD_PORT3_PHY_ADDR);
+ slot_qsgmii_phyaddr[1][2]);
}
break;
case 38:
- fm_info_set_phy_address(FM1_DTSEC5, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC6, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]);
+ fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]);
+ fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]);
+ fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]);
+ fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]);
+ fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]);
if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
fm_info_set_phy_address(FM1_DTSEC9,
- QSGMII_CARD_PHY_ADDR);
+ slot_qsgmii_phyaddr[1][3]);
fm_info_set_phy_address(FM1_DTSEC10,
- QSGMII_CARD_PHY_ADDR);
+ slot_qsgmii_phyaddr[1][2]);
}
break;
case 40:
case 46:
case 48:
- fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]);
+ fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]);
if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
fm_info_set_phy_address(FM1_DTSEC10,
- SGMII_CARD_PORT3_PHY_ADDR);
+ slot_qsgmii_phyaddr[1][3]);
fm_info_set_phy_address(FM1_DTSEC9,
- SGMII_CARD_PORT4_PHY_ADDR);
+ slot_qsgmii_phyaddr[1][2]);
}
- fm_info_set_phy_address(FM1_DTSEC1, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC2, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC3, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC4, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]);
+ fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]);
+ fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]);
+ fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]);
break;
default:
puts("Invalid SerDes1 protocol for T4240QDS\n");
@@ -293,7 +513,7 @@ int board_eth_init(bd_t *bis)
}
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
- int idx = i - FM1_DTSEC1, lane, slot;
+ idx = i - FM1_DTSEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_SGMII:
lane = serdes_get_first_lane(FSL_SRDS_1,
@@ -334,8 +554,16 @@ int board_eth_init(bd_t *bis)
}
for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+ idx = i - FM1_10GEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_XGMII:
+ lane = serdes_get_first_lane(FSL_SRDS_1,
+ XAUI_FM1_MAC9 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot_fsm1[lane];
+ if (QIXIS_READ(present2) & (1 << (slot - 1)))
+ fm_disable_port(i);
mdio_mux[i] = EMI2;
fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
break;
@@ -344,7 +572,6 @@ int board_eth_init(bd_t *bis)
}
}
-
#if (CONFIG_SYS_NUM_FMAN == 2)
switch (srds_prtcl_s2) {
case 1:
@@ -364,68 +591,64 @@ int board_eth_init(bd_t *bis)
case 26:
/* XAUI/HiGig in Slot3, SGMII in Slot4 */
fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
+ fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
+ fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
+ fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
break;
case 28:
case 36:
/* SGMII in Slot3 and Slot4 */
- fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
+ fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
+ fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
+ fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
+ fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]);
+ fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]);
+ fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]);
+ fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]);
break;
case 38:
/* QSGMII in Slot3 and Slot4 */
- fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC5, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC6, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC9, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC10, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
+ fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
+ fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
+ fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
+ fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]);
+ fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]);
+ fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]);
+ fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]);
break;
case 40:
case 46:
case 48:
/* SGMII in Slot3 */
- fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]);
+ fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]);
+ fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]);
+ fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]);
/* QSGMII in Slot4 */
- fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
+ fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
+ fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
+ fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
break;
case 50:
case 52:
case 54:
fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
+ fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
+ fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
+ fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
break;
case 56:
case 57:
/* XFI in Slot3, SGMII in Slot4 */
- fm_info_set_phy_address(FM1_10GEC1, XFI_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM1_10GEC2, XFI_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM2_10GEC2, XFI_CARD_PORT3_PHY_ADDR);
- fm_info_set_phy_address(FM2_10GEC1, XFI_CARD_PORT4_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
+ fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
+ fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
+ fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
break;
default:
puts("Invalid SerDes2 protocol for T4240QDS\n");
@@ -433,7 +656,7 @@ int board_eth_init(bd_t *bis)
}
for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
- int idx = i - FM2_DTSEC1, lane, slot;
+ idx = i - FM2_DTSEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_SGMII:
lane = serdes_get_first_lane(FSL_SRDS_2,
@@ -477,8 +700,16 @@ int board_eth_init(bd_t *bis)
}
for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) {
+ idx = i - FM2_10GEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_XGMII:
+ lane = serdes_get_first_lane(FSL_SRDS_2,
+ XAUI_FM2_MAC9 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot_fsm2[lane];
+ if (QIXIS_READ(present2) & (1 << (slot - 1)))
+ fm_disable_port(i);
mdio_mux[i] = EMI2;
fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
break;
diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c
index 6f2c5c8..f3848f3 100644
--- a/board/freescale/t4qds/law.c
+++ b/board/freescale/t4qds/law.c
@@ -37,7 +37,8 @@ struct law_entry law_table[] = {
#endif
SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
#ifdef CONFIG_SYS_DCSRBAR_PHYS
- SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
+ /* Limit DCSR to 32M to access NPC Trace Buffer */
+ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
#endif
#ifdef CONFIG_SYS_NAND_BASE_PHYS
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
diff --git a/board/freescale/t4qds/t4240qds_qixis.h b/board/freescale/t4qds/t4240qds_qixis.h
index efb718d..485353d 100644
--- a/board/freescale/t4qds/t4240qds_qixis.h
+++ b/board/freescale/t4qds/t4240qds_qixis.h
@@ -42,7 +42,7 @@
#define QIXIS_DDRCLK_125 0x2
#define QIXIS_DDRCLK_133 0x3
-#define BRDCFG5_RESET 0x00
+#define BRDCFG5_IRE 0x20 /* i2c Remote i2c1 enable */
#define BRDCFG12_SD3EN_MASK 0x20
#define BRDCFG12_SD3MX_MASK 0x08
diff --git a/board/freescale/t4qds/t4_pbi.cfg b/board/freescale/t4qds/t4_pbi.cfg
new file mode 100644
index 0000000..c598fb5
--- /dev/null
+++ b/board/freescale/t4qds/t4_pbi.cfg
@@ -0,0 +1,36 @@
+#PBI commands
+#Initialize CPC1
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+#512KB SRAM
+09010100 00000000
+09010104 fff80009
+09010f00 08000000
+#enable CPC1
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff80000
+09000d08 81000012
+#workaround for IFC bus speed
+091241c0 f03f3f3f
+091241c4 ff003f3f
+09124010 00000101
+09124130 0000000c
+#workaround for SERDES A-006031
+090ea000 064740e6
+090ea020 064740e6
+090eb000 064740e6
+090eb020 064740e6
+090ec000 064740e6
+090ec020 064740e6
+090ed000 064740e6
+090ed020 064740e6
+#Configure alternate space
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Flush PBL data
+09138000 00000000
+091380c0 00000000
diff --git a/board/freescale/t4qds/t4_rcw.cfg b/board/freescale/t4qds/t4_rcw.cfg
new file mode 100644
index 0000000..6ac95ff
--- /dev/null
+++ b/board/freescale/t4qds/t4_rcw.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#serdes protocol 1_28_6_12
+14180019 0c101916 00000000 00000000
+04383060 30548c00 6c020000 19000000
+00000000 ee0000ee 00000000 000187fc
+00000000 00000000 00000000 00000018
diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4qds.c
index 3c95f3f..f0f280b 100644
--- a/board/freescale/t4qds/t4qds.c
+++ b/board/freescale/t4qds/t4qds.c
@@ -110,7 +110,7 @@ int checkboard(void)
for (i = 0; i < MAX_SERDES; i++) {
static const char *freq[] = {
"100", "125", "156.25", "161.1328125"};
- unsigned int clock = (sw >> (2 * i)) & 3;
+ unsigned int clock = (sw >> (6 - 2 * i)) & 3;
printf("SERDES%u=%sMHz ", i+1, freq[clock]);
}
@@ -132,6 +132,243 @@ int select_i2c_ch_pca9547(u8 ch)
return 0;
}
+/*
+ * read_voltage from sensor on I2C bus
+ * We use average of 4 readings, waiting for 532us befor another reading
+ */
+#define NUM_READINGS 4 /* prefer to be power of 2 for efficiency */
+#define WAIT_FOR_ADC 532 /* wait for 532 microseconds for ADC */
+
+static inline int read_voltage(void)
+{
+ int i, ret, voltage_read = 0;
+ u16 vol_mon;
+
+ for (i = 0; i < NUM_READINGS; i++) {
+ ret = i2c_read(I2C_VOL_MONITOR_ADDR,
+ I2C_VOL_MONITOR_BUS_V_OFFSET, 1, (void *)&vol_mon, 2);
+ if (ret) {
+ printf("VID: failed to read core voltage\n");
+ return ret;
+ }
+ if (vol_mon & I2C_VOL_MONITOR_BUS_V_OVF) {
+ printf("VID: Core voltage sensor error\n");
+ return -1;
+ }
+ debug("VID: bus voltage reads 0x%04x\n", vol_mon);
+ /* LSB = 4mv */
+ voltage_read += (vol_mon >> I2C_VOL_MONITOR_BUS_V_SHIFT) * 4;
+ udelay(WAIT_FOR_ADC);
+ }
+ /* calculate the average */
+ voltage_read /= NUM_READINGS;
+
+ return voltage_read;
+}
+
+/*
+ * We need to calculate how long before the voltage starts to drop or increase
+ * It returns with the loop count. Each loop takes several readings (532us)
+ */
+static inline int wait_for_voltage_change(int vdd_last)
+{
+ int timeout, vdd_current;
+
+ vdd_current = read_voltage();
+ /* wait until voltage starts to drop */
+ for (timeout = 0; abs(vdd_last - vdd_current) <= 4 &&
+ timeout < 100; timeout++) {
+ vdd_current = read_voltage();
+ }
+ if (timeout >= 100) {
+ printf("VID: Voltage adjustment timeout\n");
+ return -1;
+ }
+ return timeout;
+}
+
+/*
+ * argument 'wait' is the time we know the voltage difference can be measured
+ * this function keeps reading the voltage until it is stable
+ */
+static inline int wait_for_voltage_stable(int wait)
+{
+ int timeout, vdd_current, vdd_last;
+
+ vdd_last = read_voltage();
+ udelay(wait * NUM_READINGS * WAIT_FOR_ADC);
+ /* wait until voltage is stable */
+ vdd_current = read_voltage();
+ for (timeout = 0; abs(vdd_last - vdd_current) >= 4 &&
+ timeout < 100; timeout++) {
+ vdd_last = vdd_current;
+ udelay(wait * NUM_READINGS * WAIT_FOR_ADC);
+ vdd_current = read_voltage();
+ }
+ if (timeout >= 100) {
+ printf("VID: Voltage adjustment timeout\n");
+ return -1;
+ }
+
+ return vdd_current;
+}
+
+static inline int set_voltage(u8 vid)
+{
+ int wait, vdd_last;
+
+ vdd_last = read_voltage();
+ QIXIS_WRITE(brdcfg[6], vid);
+ wait = wait_for_voltage_change(vdd_last);
+ if (wait < 0)
+ return -1;
+ debug("VID: Waited %d us\n", wait * NUM_READINGS * WAIT_FOR_ADC);
+ wait = wait ? wait : 1;
+
+ vdd_last = wait_for_voltage_stable(wait);
+ if (vdd_last < 0)
+ return -1;
+ debug("VID: Current voltage is %d mV\n", vdd_last);
+
+ return vdd_last;
+}
+
+
+static int adjust_vdd(ulong vdd_override)
+{
+ int re_enable = disable_interrupts();
+ ccsr_gur_t __iomem *gur =
+ (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 fusesr;
+ u8 vid, vid_current;
+ int vdd_target, vdd_current, vdd_last;
+ int ret;
+ unsigned long vdd_string_override;
+ char *vdd_string;
+ static const uint16_t vdd[32] = {
+ 0, /* unused */
+ 9875, /* 0.9875V */
+ 9750,
+ 9625,
+ 9500,
+ 9375,
+ 9250,
+ 9125,
+ 9000,
+ 8875,
+ 8750,
+ 8625,
+ 8500,
+ 8375,
+ 8250,
+ 8125,
+ 10000, /* 1.0000V */
+ 10125,
+ 10250,
+ 10375,
+ 10500,
+ 10625,
+ 10750,
+ 10875,
+ 11000,
+ 0, /* reserved */
+ };
+ struct vdd_drive {
+ u8 vid;
+ unsigned voltage;
+ };
+
+ ret = select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR);
+ if (ret) {
+ debug("VID: I2c failed to switch channel\n");
+ ret = -1;
+ goto exit;
+ }
+
+ /* get the voltage ID from fuse status register */
+ fusesr = in_be32(&gur->dcfg_fusesr);
+ vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) &
+ FSL_CORENET_DCFG_FUSESR_VID_MASK;
+ if (vid == FSL_CORENET_DCFG_FUSESR_VID_MASK) {
+ vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) &
+ FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
+ }
+ vdd_target = vdd[vid];
+
+ /* check override variable for overriding VDD */
+ vdd_string = getenv("t4240qds_vdd_mv");
+ if (vdd_override == 0 && vdd_string &&
+ !strict_strtoul(vdd_string, 10, &vdd_string_override))
+ vdd_override = vdd_string_override;
+ if (vdd_override >= 819 && vdd_override <= 1212) {
+ vdd_target = vdd_override * 10; /* convert to 1/10 mV */
+ debug("VDD override is %lu\n", vdd_override);
+ } else if (vdd_override != 0) {
+ printf("Invalid value.\n");
+ }
+
+ if (vdd_target == 0) {
+ debug("VID: VID not used\n");
+ ret = 0;
+ goto exit;
+ } else {
+ /* round up and divice by 10 to get a value in mV */
+ vdd_target = DIV_ROUND_UP(vdd_target, 10);
+ debug("VID: vid = %d mV\n", vdd_target);
+ }
+
+ /*
+ * Check current board VID setting
+ * Voltage regulator support output to 6.250mv step
+ * The highes voltage allowed for this board is (vid=0x40) 1.21250V
+ * the lowest is (vid=0x7f) 0.81875V
+ */
+ vid_current = QIXIS_READ(brdcfg[6]);
+ vdd_current = 121250 - (vid_current - 0x40) * 625;
+ debug("VID: Current vid setting is (0x%x) %d mV\n",
+ vid_current, vdd_current/100);
+
+ /*
+ * Read voltage monitor to check real voltage.
+ * Voltage monitor LSB is 4mv.
+ */
+ vdd_last = read_voltage();
+ if (vdd_last < 0) {
+ printf("VID: Could not read voltage sensor abort VID adjustment\n");
+ ret = -1;
+ goto exit;
+ }
+ debug("VID: Core voltage is at %d mV\n", vdd_last);
+ /*
+ * Adjust voltage to at or 8mV above target.
+ * Each step of adjustment is 6.25mV.
+ * Stepping down too fast may cause over current.
+ */
+ while (vdd_last > 0 && vid_current < 0x80 &&
+ vdd_last > (vdd_target + 8)) {
+ vid_current++;
+ vdd_last = set_voltage(vid_current);
+ }
+ /*
+ * Check if we need to step up
+ * This happens when board voltage switch was set too low
+ */
+ while (vdd_last > 0 && vid_current >= 0x40 &&
+ vdd_last < vdd_target + 2) {
+ vid_current--;
+ vdd_last = set_voltage(vid_current);
+ }
+ if (vdd_last > 0)
+ printf("VID: Core voltage %d mV\n", vdd_last);
+ else
+ ret = -1;
+
+exit:
+ if (re_enable)
+ enable_interrupts();
+ return ret;
+}
+
/* Configure Crossbar switches for Front-Side SerDes Ports */
int config_frontside_crossbar_vsc3316(void)
{
@@ -282,8 +519,15 @@ int board_early_init_r(void)
setup_portals();
#endif
- /* Disable remote I2C connectoin */
- QIXIS_WRITE(brdcfg[5], BRDCFG5_RESET);
+ /* Disable remote I2C connection to qixis fpga */
+ QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE);
+
+ /*
+ * Adjust core voltage according to voltage ID
+ * This function changes I2C mux to channel 2.
+ */
+ if (adjust_vdd(0))
+ printf("Warning: Adjusting core voltage failed.\n");
/* Configure board SERDES ports crossbar */
config_frontside_crossbar_vsc3316();
@@ -296,6 +540,20 @@ int board_early_init_r(void)
unsigned long get_board_sys_clk(void)
{
u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
+ /* use accurate clock measurement */
+ int freq = QIXIS_READ(clk_freq[0]) << 8 | QIXIS_READ(clk_freq[1]);
+ int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
+ u32 val;
+
+ val = freq * base;
+ if (val) {
+ debug("SYS Clock measurement is: %d\n", val);
+ return val;
+ } else {
+ printf("Warning: SYS clock measurement is invalid, using value from brdcfg1.\n");
+ }
+#endif
switch (sysclk_conf & 0x0F) {
case QIXIS_SYSCLK_83:
@@ -319,6 +577,20 @@ unsigned long get_board_sys_clk(void)
unsigned long get_board_ddr_clk(void)
{
u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
+ /* use accurate clock measurement */
+ int freq = QIXIS_READ(clk_freq[2]) << 8 | QIXIS_READ(clk_freq[3]);
+ int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
+ u32 val;
+
+ val = freq * base;
+ if (val) {
+ debug("DDR Clock measurement is: %d\n", val);
+ return val;
+ } else {
+ printf("Warning: DDR clock measurement is invalid, using value from brdcfg1.\n");
+ }
+#endif
switch ((ddrclk_conf & 0x30) >> 4) {
case QIXIS_DDRCLK_100:
@@ -357,7 +629,7 @@ int misc_init_r(void)
sw = QIXIS_READ(brdcfg[2]);
for (i = 0; i < MAX_SERDES; i++) {
- unsigned int clock = (sw >> (2 * i)) & 3;
+ unsigned int clock = (sw >> (6 - 2 * i)) & 3;
switch (clock) {
case 0:
actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
@@ -414,6 +686,106 @@ void ft_board_setup(void *blob, bd_t *bd)
}
/*
+ * This function is called by bdinfo to print detail board information.
+ * As an exmaple for future board, we organize the messages into
+ * several sections. If applicable, the message is in the format of
+ * <name> = <value>
+ * It should aligned with normal output of bdinfo command.
+ *
+ * Voltage: Core, DDR and another configurable voltages
+ * Clock : Critical clocks which are not printed already
+ * RCW : RCW source if not printed already
+ * Misc : Other important information not in above catagories
+ */
+void board_detail(void)
+{
+ int i;
+ u8 brdcfg[16], dutcfg[16], rst_ctl;
+ int vdd, rcwsrc;
+ static const char * const clk[] = {"66.67", "100", "125", "133.33"};
+
+ for (i = 0; i < 16; i++) {
+ brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i);
+ dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i);
+ }
+
+ /* Voltage secion */
+ if (!select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR)) {
+ vdd = read_voltage();
+ if (vdd > 0)
+ printf("Core voltage= %d mV\n", vdd);
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ }
+
+ printf("XVDD = 1.%d V\n", ((brdcfg[8] & 0xf) - 4) * 5 + 25);
+
+ /* clock section */
+ printf("SYSCLK = %s MHz\nDDRCLK = %s MHz\n",
+ clk[(brdcfg[11] >> 2) & 0x3], clk[brdcfg[11] & 3]);
+
+ /* RCW section */
+ rcwsrc = (dutcfg[0] << 1) + (dutcfg[1] & 1);
+ puts("RCW source = ");
+ switch (rcwsrc) {
+ case 0x017:
+ case 0x01f:
+ puts("8-bit NOR\n");
+ break;
+ case 0x027:
+ case 0x02F:
+ puts("16-bit NOR\n");
+ break;
+ case 0x040:
+ puts("SDHC/eMMC\n");
+ break;
+ case 0x044:
+ puts("SPI 16-bit addressing\n");
+ break;
+ case 0x045:
+ puts("SPI 24-bit addressing\n");
+ break;
+ case 0x048:
+ puts("I2C normal addressing\n");
+ break;
+ case 0x049:
+ puts("I2C extended addressing\n");
+ break;
+ case 0x108:
+ case 0x109:
+ case 0x10a:
+ case 0x10b:
+ puts("8-bit NAND, 2KB\n");
+ break;
+ default:
+ if ((rcwsrc >= 0x080) && (rcwsrc <= 0x09f))
+ puts("Hard-coded RCW\n");
+ else if ((rcwsrc >= 0x110) && (rcwsrc <= 0x11f))
+ puts("8-bit NAND, 4KB\n");
+ else
+ puts("unknown\n");
+ break;
+ }
+
+ /* Misc section */
+ rst_ctl = QIXIS_READ(rst_ctl);
+ puts("HRESET_REQ = ");
+ switch (rst_ctl & 0x30) {
+ case 0x00:
+ puts("Ignored\n");
+ break;
+ case 0x10:
+ puts("Assert HRESET\n");
+ break;
+ case 0x30:
+ puts("Reset system\n");
+ break;
+ default:
+ puts("N/A\n");
+ break;
+ }
+}
+
+/*
* Reverse engineering switch settings.
* Some bits cannot be figured out. They will be displayed as
* underscore in binary format. mask[] has those bits.
@@ -429,7 +801,7 @@ void qixis_dump_switch(void)
* Any bit with 1 means that bit cannot be reverse engineered.
* It will be displayed as _ in binary format.
*/
- static const u8 mask[] = {0, 0, 0, 0, 0, 0x1, 0xdf, 0x3f, 0x1f};
+ static const u8 mask[] = {0, 0, 0, 0, 0, 0x1, 0xcf, 0x3f, 0x1f};
char buf[10];
u8 brdcfg[16], dutcfg[16];
@@ -460,7 +832,8 @@ void qixis_dump_switch(void)
sw[5] = ((brdcfg[0] & 0x0f) << 4) | \
((QIXIS_READ(rst_ctl) & 0x30) >> 2) | \
((brdcfg[0] & 0x40) >> 5);
- sw[6] = (brdcfg[11] & 0x20);
+ sw[6] = (brdcfg[11] & 0x20) |
+ ((brdcfg[5] & 0x02) << 3);
sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) | \
((brdcfg[5] & 0x10) << 2);
sw[8] = ((brdcfg[12] & 0x08) << 4) | \
@@ -472,3 +845,23 @@ void qixis_dump_switch(void)
i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
}
}
+
+static int do_vdd_adjust(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ ulong override;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+ if (!strict_strtoul(argv[1], 10, &override))
+ adjust_vdd(override); /* the value is checked by callee */
+ else
+ return CMD_RET_USAGE;
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ vdd_override, 2, 0, do_vdd_adjust,
+ "Override VDD",
+ "- override with the voltage specified in mV, eg. 1050"
+);
diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c
index 80eb511..92c01cf 100644
--- a/board/freescale/t4qds/tlb.c
+++ b/board/freescale/t4qds/tlb.c
@@ -115,7 +115,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
#ifdef CONFIG_SYS_DCSRBAR_PHYS
SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 13, BOOKE_PAGESZ_4M, 1),
+ 0, 13, BOOKE_PAGESZ_32M, 1),
#endif
#ifdef CONFIG_SYS_NAND_BASE
/*