diff options
Diffstat (limited to 'board/freescale')
-rw-r--r-- | board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c | 257 |
1 files changed, 257 insertions, 0 deletions
diff --git a/board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c b/board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c index b8086ff..0770818 100644 --- a/board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c +++ b/board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c @@ -31,6 +31,10 @@ #include <linux/fb.h> #include <mxsfb.h> #endif +#if defined(CONFIG_MXC_EPDC) +#include <lcd.h> +#include <mxc_epdc_fb.h> +#endif DECLARE_GLOBAL_DATA_PTR; @@ -59,6 +63,8 @@ DECLARE_GLOBAL_DATA_PTR; #define SPI_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS) +#define EPDC_PAD_CTRL 0x0 + #ifdef CONFIG_SYS_I2C_MXC #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) /* I2C1 for PMIC */ @@ -554,6 +560,253 @@ int board_early_init_f(void) return 0; } +#ifdef CONFIG_MXC_EPDC +static iomux_v3_cfg_t const epdc_enable_pads[] = { + MX7D_PAD_EPDC_DATA00__EPDC_DATA0 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_DATA01__EPDC_DATA1 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_DATA02__EPDC_DATA2 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_DATA03__EPDC_DATA3 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_DATA04__EPDC_DATA4 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_DATA05__EPDC_DATA5 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_DATA06__EPDC_DATA6 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_DATA07__EPDC_DATA7 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_SDCLK__EPDC_SDCLK | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_SDLE__EPDC_SDLE | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_SDOE__EPDC_SDOE | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_SDSHR__EPDC_SDSHR | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_SDCE0__EPDC_SDCE0 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_SDCE1__EPDC_SDCE1 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_SDCE2__EPDC_SDCE2 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_SDCE3__EPDC_SDCE3 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_GDCLK__EPDC_GDCLK | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_GDOE__EPDC_GDOE | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_GDRL__EPDC_GDRL | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_GDSP__EPDC_GDSP | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_BDR0__EPDC_BDR0 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX7D_PAD_EPDC_BDR1__EPDC_BDR1 | MUX_PAD_CTRL(EPDC_PAD_CTRL), +}; + +static iomux_v3_cfg_t const epdc_disable_pads[] = { + MX7D_PAD_EPDC_DATA00__GPIO2_IO0, + MX7D_PAD_EPDC_DATA01__GPIO2_IO1, + MX7D_PAD_EPDC_DATA02__GPIO2_IO2, + MX7D_PAD_EPDC_DATA03__GPIO2_IO3, + MX7D_PAD_EPDC_DATA04__GPIO2_IO4, + MX7D_PAD_EPDC_DATA05__GPIO2_IO5, + MX7D_PAD_EPDC_DATA06__GPIO2_IO6, + MX7D_PAD_EPDC_DATA07__GPIO2_IO7, + MX7D_PAD_EPDC_SDCLK__GPIO2_IO16, + MX7D_PAD_EPDC_SDLE__GPIO2_IO17, + MX7D_PAD_EPDC_SDOE__GPIO2_IO18, + MX7D_PAD_EPDC_SDSHR__GPIO2_IO19, + MX7D_PAD_EPDC_SDCE0__GPIO2_IO20, + MX7D_PAD_EPDC_SDCE1__GPIO2_IO21, + MX7D_PAD_EPDC_SDCE2__GPIO2_IO22, + MX7D_PAD_EPDC_SDCE3__GPIO2_IO23, + MX7D_PAD_EPDC_GDCLK__GPIO2_IO24, + MX7D_PAD_EPDC_GDOE__GPIO2_IO25, + MX7D_PAD_EPDC_GDRL__GPIO2_IO26, + MX7D_PAD_EPDC_GDSP__GPIO2_IO27, + MX7D_PAD_EPDC_BDR0__GPIO2_IO28, + MX7D_PAD_EPDC_BDR1__GPIO2_IO29, +}; + +vidinfo_t panel_info = { + .vl_refresh = 85, + .vl_col = 1024, + .vl_row = 758, + .vl_pixclock = 40000000, + .vl_left_margin = 12, + .vl_right_margin = 76, + .vl_upper_margin = 4, + .vl_lower_margin = 5, + .vl_hsync = 12, + .vl_vsync = 2, + .vl_sync = 0, + .vl_mode = 0, + .vl_flag = 0, + .vl_bpix = 3, + .cmap = 0, +}; + +struct epdc_timing_params panel_timings = { + .vscan_holdoff = 4, + .sdoed_width = 10, + .sdoed_delay = 20, + .sdoez_width = 10, + .sdoez_delay = 20, + .gdclk_hp_offs = 524, + .gdsp_offs = 327, + .gdoe_offs = 0, + .gdclk_offs = 19, + .num_ce = 1, +}; + +static void setup_epdc_power(void) +{ + /* IOMUX_GPR1: bit30: Disable On-chip RAM EPDC Function */ + struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs + = (struct iomuxc_gpr_base_regs *) IOMUXC_GPR_BASE_ADDR; + + clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], + IOMUXC_GPR_GPR1_GPR_ENABLE_OCRAM_EPDC_MASK, 0); + + /* Setup epdc voltage */ + + /* EPDC_PWRSTAT - GPIO2[31] for PWR_GOOD status */ + imx_iomux_v3_setup_pad(MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + gpio_direction_input(IMX_GPIO_NR(2, 31)); + + /* EPDC_VCOM0 - GPIO4[14] for VCOM control */ + imx_iomux_v3_setup_pad(MX7D_PAD_I2C4_SCL__GPIO4_IO14 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + + /* Set as output */ + gpio_direction_output(IMX_GPIO_NR(4, 14), 1); + + /* EPDC_PWRWAKEUP - GPIO4[23] for EPD PMIC WAKEUP */ + imx_iomux_v3_setup_pad(MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + /* Set as output */ + gpio_direction_output(IMX_GPIO_NR(4, 23), 1); + + /* EPDC_PWRCTRL0 - GPIO4[20] for EPD PWR CTL0 */ + imx_iomux_v3_setup_pad(MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + /* Set as output */ + gpio_direction_output(IMX_GPIO_NR(4, 20), 1); +} + +int setup_waveform_file(ulong waveform_buf) +{ + char *fs_argv[5]; + char addr[17]; + ulong file_len, mmc_dev; + + if (!check_mmc_autodetect()) + mmc_dev = getenv_ulong("mmcdev", 10, 0); + else + mmc_dev = mmc_get_env_devno(); + + sprintf(addr, "%lx", waveform_buf); + + fs_argv[0] = "fatload"; + fs_argv[1] = "mmc"; + fs_argv[2] = simple_itoa(mmc_dev); + fs_argv[3] = addr; + fs_argv[4] = getenv("epdc_waveform"); + + if (!fs_argv[4]) + fs_argv[4] = "epdc_splash.bin"; + + if (do_fat_fsload(NULL, 0, 5, fs_argv)) { + printf("File %s not found on MMC Device %lu \n", fs_argv[4], mmc_dev); + return -1; + } + + file_len = getenv_hex("filesize", 0); + if (!file_len) + return -1; + + flush_cache((ulong)addr, file_len); + + return 0; +} + +static void epdc_enable_pins(void) +{ + /* epdc iomux settings */ + imx_iomux_v3_setup_multiple_pads(epdc_enable_pads, + ARRAY_SIZE(epdc_enable_pads)); +} + +static void epdc_disable_pins(void) +{ + /* Configure MUX settings for EPDC pins to GPIO and drive to 0 */ + imx_iomux_v3_setup_multiple_pads(epdc_disable_pads, + ARRAY_SIZE(epdc_disable_pads)); +} + +static void setup_epdc(void) +{ + /*** epdc Maxim PMIC settings ***/ + + /* EPDC_PWRSTAT - GPIO2[31] for PWR_GOOD status */ + imx_iomux_v3_setup_pad(MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + + /* EPDC_VCOM0 - GPIO4[14] for VCOM control */ + imx_iomux_v3_setup_pad(MX7D_PAD_I2C4_SCL__GPIO4_IO14 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + + /* EPDC_PWRWAKEUP - GPIO4[23] for EPD PMIC WAKEUP */ + imx_iomux_v3_setup_pad(MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + + /* EPDC_PWRCTRL0 - GPIO4[20] for EPD PWR CTL0 */ + imx_iomux_v3_setup_pad(MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + + /* Set pixel clock rates for EPDC in clock.c */ + + panel_info.epdc_data.wv_modes.mode_init = 0; + panel_info.epdc_data.wv_modes.mode_du = 1; + panel_info.epdc_data.wv_modes.mode_gc4 = 3; + panel_info.epdc_data.wv_modes.mode_gc8 = 2; + panel_info.epdc_data.wv_modes.mode_gc16 = 2; + panel_info.epdc_data.wv_modes.mode_gc32 = 2; + + panel_info.epdc_data.epdc_timings = panel_timings; + + setup_epdc_power(); +} + +void epdc_power_on(void) +{ + unsigned int reg; + struct gpio_regs *gpio_regs = (struct gpio_regs *)GPIO2_BASE_ADDR; + + /* Set EPD_PWR_CTL0 to high - enable EINK_VDD (3.15) */ + gpio_set_value(IMX_GPIO_NR(4, 20), 1); + udelay(1000); + + /* Enable epdc signal pin */ + epdc_enable_pins(); + + /* Set PMIC Wakeup to high - enable Display power */ + gpio_set_value(IMX_GPIO_NR(4, 23), 1); + + /* Wait for PWRGOOD == 1 */ + while (1) { + reg = readl(&gpio_regs->gpio_psr); + if (!(reg & (1 << 31))) + break; + + udelay(100); + } + + /* Enable VCOM */ + gpio_set_value(IMX_GPIO_NR(4, 14), 1); + + udelay(500); +} + +void epdc_power_off(void) +{ + /* Set PMIC Wakeup to low - disable Display power */ + gpio_set_value(IMX_GPIO_NR(4, 23), 0); + + /* Disable VCOM */ + gpio_set_value(IMX_GPIO_NR(4, 14), 0); + + epdc_disable_pins(); + + /* Set EPD_PWR_CTL0 to low - disable EINK_VDD (3.15) */ + gpio_set_value(IMX_GPIO_NR(4, 20), 0); +} +#endif + int board_init(void) { /* address of boot parameters */ @@ -578,6 +831,10 @@ int board_init(void) board_qspi_init(); #endif +#ifdef CONFIG_MXC_EPDC + setup_epdc(); +#endif + return 0; } |