summaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/mx6sabresd/mx6sabresd.c331
-rw-r--r--board/freescale/mx6slevk/mx6slevk.c326
2 files changed, 657 insertions, 0 deletions
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index b813f6f..562355d 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -20,6 +20,11 @@
#include <fsl_esdhc.h>
#include <miiphy.h>
#include <netdev.h>
+
+#if defined(CONFIG_MX6DL) && defined(CONFIG_MXC_EPDC)
+#include <lcd.h>
+#include <mxc_epdc_fb.h>
+#endif
#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/crm_regs.h>
#include <asm/io.h>
@@ -56,6 +61,8 @@ DECLARE_GLOBAL_DATA_PTR;
#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
#define DISP0_PWR_EN IMX_GPIO_NR(1, 21)
+#define EPDC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
int dram_init(void)
{
@@ -219,6 +226,54 @@ iomux_v3_cfg_t const di0_pads[] = {
MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03, /* DISP0_VSYNC */
};
+#if defined(CONFIG_MX6DL) && defined(CONFIG_MXC_EPDC)
+static iomux_v3_cfg_t const epdc_enable_pads[] = {
+ MX6_PAD_EIM_A16__EPDC_SDDO_0 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_DA10__EPDC_SDDO_1 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_DA12__EPDC_SDDO_2 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_DA11__EPDC_SDDO_3 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_LBA__EPDC_SDDO_4 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_EB2__EPDC_SDDO_5 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_CS0__EPDC_SDDO_6 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_RW__EPDC_SDDO_7 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_A21__EPDC_GDCLK | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_A22__EPDC_GDSP | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_A23__EPDC_GDOE | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_A24__EPDC_GDRL | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_D31__EPDC_SDCLK | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_D27__EPDC_SDOE | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_DA1__EPDC_SDLE | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_EB1__EPDC_SDSHR | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_DA2__EPDC_BDR_0 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_DA4__EPDC_SDCE_0 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_DA5__EPDC_SDCE_1 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EIM_DA6__EPDC_SDCE_2 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const epdc_disable_pads[] = {
+ MX6_PAD_EIM_A16__GPIO_2_22,
+ MX6_PAD_EIM_DA10__GPIO_3_10,
+ MX6_PAD_EIM_DA12__GPIO_3_12,
+ MX6_PAD_EIM_DA11__GPIO_3_11,
+ MX6_PAD_EIM_LBA__GPIO_2_27,
+ MX6_PAD_EIM_EB2__GPIO_2_30,
+ MX6_PAD_EIM_CS0__GPIO_2_23,
+ MX6_PAD_EIM_RW__GPIO_2_26,
+ MX6_PAD_EIM_A21__GPIO_2_17,
+ MX6_PAD_EIM_A22__GPIO_2_16,
+ MX6_PAD_EIM_A23__GPIO_6_6,
+ MX6_PAD_EIM_A24__GPIO_5_4,
+ MX6_PAD_EIM_D31__GPIO_3_31,
+ MX6_PAD_EIM_D27__GPIO_3_27,
+ MX6_PAD_EIM_DA1__GPIO_3_1,
+ MX6_PAD_EIM_EB1__GPIO_2_29,
+ MX6_PAD_EIM_DA2__GPIO_3_2,
+ MX6_PAD_EIM_DA4__GPIO_3_4,
+ MX6_PAD_EIM_DA5__GPIO_3_5,
+ MX6_PAD_EIM_DA6__GPIO_3_6,
+};
+#endif
+
static void setup_iomux_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
@@ -611,6 +666,272 @@ int board_early_init_f(void)
return 0;
}
+#if defined(CONFIG_MX6DL) && defined(CONFIG_MXC_EPDC)
+#ifdef CONFIG_SPLASH_SCREEN
+extern int mmc_get_env_devno(void);
+int setup_splash_img(void)
+{
+#ifdef CONFIG_SPLASH_IS_IN_MMC
+ int mmc_dev = mmc_get_env_devno();
+ ulong offset = CONFIG_SPLASH_IMG_OFFSET;
+ ulong size = CONFIG_SPLASH_IMG_SIZE;
+ ulong addr = 0;
+ char *s = NULL;
+ struct mmc *mmc = find_mmc_device(mmc_dev);
+ uint blk_start, blk_cnt, n;
+
+ s = getenv("splashimage");
+
+ if (NULL == s) {
+ puts("env splashimage not found!\n");
+ return -1;
+ }
+ addr = simple_strtoul(s, NULL, 16);
+
+ if (!mmc) {
+ printf("MMC Device %d not found\n", mmc_dev);
+ return -1;
+ }
+
+ if (mmc_init(mmc)) {
+ puts("MMC init failed\n");
+ return -1;
+ }
+
+ blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
+ blk_cnt = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
+ n = mmc->block_dev.block_read(mmc_dev, blk_start,
+ blk_cnt, (u_char *)addr);
+ flush_cache((ulong)addr, blk_cnt * mmc->read_bl_len);
+
+ return (n == blk_cnt) ? 0 : -1;
+#endif
+
+ return 0;
+}
+#endif
+
+vidinfo_t panel_info = {
+ .vl_refresh = 85,
+ .vl_col = 800,
+ .vl_row = 600,
+ .vl_pixclock = 26666667,
+ .vl_left_margin = 8,
+ .vl_right_margin = 100,
+ .vl_upper_margin = 4,
+ .vl_lower_margin = 8,
+ .vl_hsync = 4,
+ .vl_vsync = 1,
+ .vl_sync = 0,
+ .vl_mode = 0,
+ .vl_flag = 0,
+ .vl_bpix = 3,
+ .cmap = 0,
+};
+
+struct epdc_timing_params panel_timings = {
+ .vscan_holdoff = 4,
+ .sdoed_width = 10,
+ .sdoed_delay = 20,
+ .sdoez_width = 10,
+ .sdoez_delay = 20,
+ .gdclk_hp_offs = 419,
+ .gdsp_offs = 20,
+ .gdoe_offs = 0,
+ .gdclk_offs = 5,
+ .num_ce = 1,
+};
+
+static void setup_epdc_power(void)
+{
+ /* Setup epdc voltage */
+
+ /* EIM_A17 - GPIO2[21] for PWR_GOOD status */
+ imx_iomux_v3_setup_pad(MX6_PAD_EIM_A17__GPIO_2_21 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+ /* Set as input */
+ gpio_direction_input(IMX_GPIO_NR(2, 21));
+
+ /* EIM_D17 - GPIO3[17] for VCOM control */
+ imx_iomux_v3_setup_pad(MX6_PAD_EIM_D17__GPIO_3_17 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+ /* Set as output */
+ gpio_direction_output(IMX_GPIO_NR(3, 17), 1);
+
+ /* EIM_D20 - GPIO3[20] for EPD PMIC WAKEUP */
+ imx_iomux_v3_setup_pad(MX6_PAD_EIM_D20__GPIO_3_20 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+ /* Set as output */
+ gpio_direction_output(IMX_GPIO_NR(3, 20), 1);
+
+ /* EIM_A18 - GPIO2[20] for EPD PWR CTL0 */
+ imx_iomux_v3_setup_pad(MX6_PAD_EIM_A18__GPIO_2_20 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+ /* Set as output */
+ gpio_direction_output(IMX_GPIO_NR(2, 20), 1);
+}
+
+int setup_waveform_file(void)
+{
+#ifdef CONFIG_WAVEFORM_FILE_IN_MMC
+ int mmc_dev = mmc_get_env_devno();
+ ulong offset = CONFIG_WAVEFORM_FILE_OFFSET;
+ ulong size = CONFIG_WAVEFORM_FILE_SIZE;
+ ulong addr = CONFIG_WAVEFORM_BUF_ADDR;
+ struct mmc *mmc = find_mmc_device(mmc_dev);
+ uint blk_start, blk_cnt, n;
+
+ if (!mmc) {
+ printf("MMC Device %d not found\n", mmc_dev);
+ return -1;
+ }
+
+ if (mmc_init(mmc)) {
+ puts("MMC init failed\n");
+ return -1;
+ }
+
+ blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
+ blk_cnt = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
+ n = mmc->block_dev.block_read(mmc_dev, blk_start,
+ blk_cnt, (u_char *)addr);
+ flush_cache((ulong)addr, blk_cnt * mmc->read_bl_len);
+
+ return (n == blk_cnt) ? 0 : -1;
+#else
+ return -1;
+#endif
+}
+
+static void epdc_enable_pins(void)
+{
+ /* epdc iomux settings */
+ imx_iomux_v3_setup_multiple_pads(epdc_enable_pads,
+ ARRAY_SIZE(epdc_enable_pads));
+}
+
+static void epdc_disable_pins(void)
+{
+ /* Configure MUX settings for EPDC pins to GPIO */
+ imx_iomux_v3_setup_multiple_pads(epdc_disable_pads,
+ ARRAY_SIZE(epdc_disable_pads));
+}
+
+static void setup_epdc(void)
+{
+ unsigned int reg;
+
+ /*** epdc Maxim PMIC settings ***/
+
+ /* EPDC PWRSTAT - GPIO2[21] for PWR_GOOD status */
+ imx_iomux_v3_setup_pad(MX6_PAD_EIM_A17__GPIO_2_21 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+ /* EPDC VCOM0 - GPIO3[17] for VCOM control */
+ imx_iomux_v3_setup_pad(MX6_PAD_EIM_D17__GPIO_3_17 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+ /* UART4 TXD - GPIO3[20] for EPD PMIC WAKEUP */
+ imx_iomux_v3_setup_pad(MX6_PAD_EIM_D20__GPIO_3_20 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+ /* EIM_A18 - GPIO2[20] for EPD PWR CTL0 */
+ imx_iomux_v3_setup_pad(MX6_PAD_EIM_A18__GPIO_2_20 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+ /*** Set pixel clock rates for EPDC ***/
+
+ /* EPDC AXI clk (IPU2_CLK) from PFD_400M, set to 396/2 = 198MHz */
+ reg = readl(CCM_BASE_ADDR + CLKCTL_CSCDR3);
+ reg &= ~0x7C000;
+ reg |= (1 << 16) | (1 << 14);
+ writel(reg, CCM_BASE_ADDR + CLKCTL_CSCDR3);
+
+ /* EPDC AXI clk enable */
+ reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR3);
+ reg |= 0x00C0;
+ writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR3);
+
+ /* EPDC PIX clk (IPU2_DI1_CLK) from PLL5, set to 650/4/6 = ~27MHz */
+ reg = readl(CCM_BASE_ADDR + CLKCTL_CSCDR2);
+ reg &= ~0x3FE00;
+ reg |= (2 << 15) | (5 << 12);
+ writel(reg, CCM_BASE_ADDR + CLKCTL_CSCDR2);
+
+ /* PLL5 enable (defaults to 650) */
+ reg = readl(ANATOP_BASE_ADDR + ANATOP_PLL_VIDEO);
+ reg &= ~((1 << 16) | (1 << 12));
+ reg |= (1 << 13);
+ writel(reg, ANATOP_BASE_ADDR + ANATOP_PLL_VIDEO);
+
+ /* EPDC PIX clk enable */
+ reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR3);
+ reg |= 0x0C00;
+ writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR3);
+
+ panel_info.epdc_data.working_buf_addr = CONFIG_WORKING_BUF_ADDR;
+ panel_info.epdc_data.waveform_buf_addr = CONFIG_WAVEFORM_BUF_ADDR;
+
+ panel_info.epdc_data.wv_modes.mode_init = 0;
+ panel_info.epdc_data.wv_modes.mode_du = 1;
+ panel_info.epdc_data.wv_modes.mode_gc4 = 3;
+ panel_info.epdc_data.wv_modes.mode_gc8 = 2;
+ panel_info.epdc_data.wv_modes.mode_gc16 = 2;
+ panel_info.epdc_data.wv_modes.mode_gc32 = 2;
+
+ panel_info.epdc_data.epdc_timings = panel_timings;
+
+ setup_epdc_power();
+
+ /* Assign fb_base */
+ gd->fb_base = CONFIG_FB_BASE;
+}
+
+void epdc_power_on(void)
+{
+ unsigned int reg;
+
+ /* Set EPD_PWR_CTL0 to high - enable EINK_VDD (3.15) */
+ gpio_set_value(IMX_GPIO_NR(2, 20), 1);
+ udelay(1000);
+
+ /* Enable epdc signal pin */
+ epdc_enable_pins();
+
+ /* Set PMIC Wakeup to high - enable Display power */
+ gpio_set_value(IMX_GPIO_NR(3, 20), 1);
+
+ /* Wait for PWRGOOD == 1 */
+ while (1) {
+ reg = readl(GPIO2_BASE_ADDR + GPIO_PSR);
+ if (!(reg & (1 << 21)))
+ break;
+
+ udelay(100);
+ }
+
+ /* Enable VCOM */
+ gpio_set_value(IMX_GPIO_NR(3, 17), 1);
+
+ udelay(500);
+}
+
+void epdc_power_off(void)
+{
+ /* Set PMIC Wakeup to low - disable Display power */
+ gpio_set_value(IMX_GPIO_NR(3, 20), 0);
+
+ /* Disable VCOM */
+ gpio_set_value(IMX_GPIO_NR(3, 17), 0);
+
+ epdc_disable_pins();
+
+ /* Set EPD_PWR_CTL0 to low - disable EINK_VDD (3.15) */
+ gpio_set_value(IMX_GPIO_NR(2, 20), 0);
+}
+#endif
+
int board_init(void)
{
/* address of boot parameters */
@@ -625,6 +946,10 @@ int board_init(void)
setup_usb();
#endif
+#if defined(CONFIG_MX6DL) && defined(CONFIG_MXC_EPDC)
+ setup_epdc();
+#endif
+
return 0;
}
@@ -688,6 +1013,12 @@ int checkboard(void)
return 0;
}
+#ifdef CONFIG_IMX_UDC
+iomux_v3_cfg_t const otg_udc_pads[] = {
+ (MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+#endif
+
#ifdef CONFIG_SPL_BUILD
#include <spl.h>
#include <libfdt.h>
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index 7c18c90..314dcc9 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -27,6 +27,10 @@
#include "../common/pfuze.h"
#include <usb.h>
#include <usb/ehci-fsl.h>
+#if defined(CONFIG_MXC_EPDC)
+#include <lcd.h>
+#include <mxc_epdc_fb.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -54,6 +58,8 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW |\
PAD_CTL_DSE_80ohm | PAD_CTL_HYS | \
PAD_CTL_SRE_FAST)
+#define EPDC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
#define ETH_PHY_RESET IMX_GPIO_NR(4, 21)
@@ -143,6 +149,52 @@ static void setup_spi(void)
}
#endif
+static iomux_v3_cfg_t const epdc_enable_pads[] = {
+ MX6_PAD_EPDC_D0__EPDC_SDDO_0 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_D1__EPDC_SDDO_1 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_D2__EPDC_SDDO_2 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_D3__EPDC_SDDO_3 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_D4__EPDC_SDDO_4 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_D5__EPDC_SDDO_5 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_D6__EPDC_SDDO_6 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_D7__EPDC_SDDO_7 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_GDCLK__EPDC_GDCLK | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_GDSP__EPDC_GDSP | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_GDOE__EPDC_GDOE | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_GDRL__EPDC_GDRL | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_SDCLK__EPDC_SDCLK | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_SDOE__EPDC_SDOE | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_SDLE__EPDC_SDLE | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_SDSHR__EPDC_SDSHR | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_BDR0__EPDC_BDR_0 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_SDCE0__EPDC_SDCE_0 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_SDCE1__EPDC_SDCE_1 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX6_PAD_EPDC_SDCE2__EPDC_SDCE_2 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const epdc_disable_pads[] = {
+ MX6_PAD_EPDC_D0__GPIO_1_7,
+ MX6_PAD_EPDC_D1__GPIO_1_8,
+ MX6_PAD_EPDC_D2__GPIO_1_9,
+ MX6_PAD_EPDC_D3__GPIO_1_10,
+ MX6_PAD_EPDC_D4__GPIO_1_11,
+ MX6_PAD_EPDC_D5__GPIO_1_12,
+ MX6_PAD_EPDC_D6__GPIO_1_13,
+ MX6_PAD_EPDC_D7__GPIO_1_14,
+ MX6_PAD_EPDC_GDCLK__GPIO_1_31,
+ MX6_PAD_EPDC_GDSP__GPIO_2_2,
+ MX6_PAD_EPDC_GDOE__GPIO_2_0,
+ MX6_PAD_EPDC_GDRL__GPIO_2_1,
+ MX6_PAD_EPDC_SDCLK__GPIO_1_23,
+ MX6_PAD_EPDC_SDOE__GPIO_1_25,
+ MX6_PAD_EPDC_SDLE__GPIO_1_24,
+ MX6_PAD_EPDC_SDSHR__GPIO_1_26,
+ MX6_PAD_EPDC_BDR0__GPIO_2_5,
+ MX6_PAD_EPDC_SDCE0__GPIO_1_27,
+ MX6_PAD_EPDC_SDCE1__GPIO_1_28,
+ MX6_PAD_EPDC_SDCE2__GPIO_1_29,
+};
+
static void setup_iomux_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
@@ -335,6 +387,270 @@ int board_early_init_f(void)
return 0;
}
+#ifdef CONFIG_MXC_EPDC
+#ifdef CONFIG_SPLASH_SCREEN
+extern int mmc_get_env_devno(void);
+int setup_splash_img(void)
+{
+#ifdef CONFIG_SPLASH_IS_IN_MMC
+ int mmc_dev = mmc_get_env_devno();
+ ulong offset = CONFIG_SPLASH_IMG_OFFSET;
+ ulong size = CONFIG_SPLASH_IMG_SIZE;
+ ulong addr = 0;
+ char *s = NULL;
+ struct mmc *mmc = find_mmc_device(mmc_dev);
+ uint blk_start, blk_cnt, n;
+
+ s = getenv("splashimage");
+
+ if (NULL == s) {
+ puts("env splashimage not found!\n");
+ return -1;
+ }
+ addr = simple_strtoul(s, NULL, 16);
+
+ if (!mmc) {
+ printf("MMC Device %d not found\n", mmc_dev);
+ return -1;
+ }
+
+ if (mmc_init(mmc)) {
+ puts("MMC init failed\n");
+ return -1;
+ }
+
+ blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
+ blk_cnt = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
+ n = mmc->block_dev.block_read(mmc_dev, blk_start,
+ blk_cnt, (u_char *)addr);
+ flush_cache((ulong)addr, blk_cnt * mmc->read_bl_len);
+
+ return (n == blk_cnt) ? 0 : -1;
+#endif
+
+ return 0;
+}
+#endif
+
+vidinfo_t panel_info = {
+ .vl_refresh = 85,
+ .vl_col = 800,
+ .vl_row = 600,
+ .vl_pixclock = 26666667,
+ .vl_left_margin = 8,
+ .vl_right_margin = 100,
+ .vl_upper_margin = 4,
+ .vl_lower_margin = 8,
+ .vl_hsync = 4,
+ .vl_vsync = 1,
+ .vl_sync = 0,
+ .vl_mode = 0,
+ .vl_flag = 0,
+ .vl_bpix = 3,
+ .cmap = 0,
+};
+
+struct epdc_timing_params panel_timings = {
+ .vscan_holdoff = 4,
+ .sdoed_width = 10,
+ .sdoed_delay = 20,
+ .sdoez_width = 10,
+ .sdoez_delay = 20,
+ .gdclk_hp_offs = 419,
+ .gdsp_offs = 20,
+ .gdoe_offs = 0,
+ .gdclk_offs = 5,
+ .num_ce = 1,
+};
+
+static void setup_epdc_power(void)
+{
+ /* Setup epdc voltage */
+
+ /* EPDC_PWRSTAT - GPIO2[13] for PWR_GOOD status */
+ imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWRSTAT__GPIO_2_13 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+ gpio_direction_input(IMX_GPIO_NR(2, 13));
+
+ /* EPDC_VCOM0 - GPIO2[3] for VCOM control */
+ imx_iomux_v3_setup_pad(MX6_PAD_EPDC_VCOM0__GPIO_2_3 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+ /* Set as output */
+ gpio_direction_output(IMX_GPIO_NR(2, 3), 1);
+
+ /* EPDC_PWRWAKEUP - GPIO2[14] for EPD PMIC WAKEUP */
+ imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWRWAKEUP__GPIO_2_14 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+ /* Set as output */
+ gpio_direction_output(IMX_GPIO_NR(2, 14), 1);
+
+ /* EPDC_PWRCTRL0 - GPIO2[7] for EPD PWR CTL0 */
+ imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWRCTRL0__GPIO_2_7 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+ /* Set as output */
+ gpio_direction_output(IMX_GPIO_NR(2, 7), 1);
+}
+
+int setup_waveform_file(void)
+{
+#ifdef CONFIG_WAVEFORM_FILE_IN_MMC
+ int mmc_dev = mmc_get_env_devno();
+ ulong offset = CONFIG_WAVEFORM_FILE_OFFSET;
+ ulong size = CONFIG_WAVEFORM_FILE_SIZE;
+ ulong addr = CONFIG_WAVEFORM_BUF_ADDR;
+ struct mmc *mmc = find_mmc_device(mmc_dev);
+ uint blk_start, blk_cnt, n;
+
+ if (!mmc) {
+ printf("MMC Device %d not found\n", mmc_dev);
+ return -1;
+ }
+
+ if (mmc_init(mmc)) {
+ puts("MMC init failed\n");
+ return -1;
+ }
+
+ blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
+ blk_cnt = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
+ n = mmc->block_dev.block_read(mmc_dev, blk_start,
+ blk_cnt, (u_char *)addr);
+ flush_cache((ulong)addr, blk_cnt * mmc->read_bl_len);
+
+ return (n == blk_cnt) ? 0 : -1;
+#else
+ return -1;
+#endif
+}
+
+static void epdc_enable_pins(void)
+{
+ /* epdc iomux settings */
+ imx_iomux_v3_setup_multiple_pads(epdc_enable_pads,
+ ARRAY_SIZE(epdc_enable_pads));
+}
+
+static void epdc_disable_pins(void)
+{
+ /* Configure MUX settings for EPDC pins to GPIO and drive to 0 */
+ imx_iomux_v3_setup_multiple_pads(epdc_disable_pads,
+ ARRAY_SIZE(epdc_disable_pads));
+}
+
+static void setup_epdc(void)
+{
+ unsigned int reg;
+
+ /*** epdc Maxim PMIC settings ***/
+
+ /* EPDC PWRSTAT - GPIO2[13] for PWR_GOOD status */
+ imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWRSTAT__GPIO_2_13 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+ /* EPDC VCOM0 - GPIO2[3] for VCOM control */
+ imx_iomux_v3_setup_pad(MX6_PAD_EPDC_VCOM0__GPIO_2_3 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+ /* UART4 TXD - GPIO2[14] for EPD PMIC WAKEUP */
+ imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWRWAKEUP__GPIO_2_14 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+ /* EIM_A18 - GPIO2[7] for EPD PWR CTL0 */
+ imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWRCTRL0__GPIO_2_7 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+ /*** Set pixel clock rates for EPDC ***/
+
+ /* EPDC AXI clk from PFD_400M, set to 396/2 = 198MHz */
+ reg = readl(CCM_BASE_ADDR + CLKCTL_CHSCCDR);
+ reg &= ~0x3F000;
+ reg |= (0x4 << 15) | (1 << 12);
+ writel(reg, CCM_BASE_ADDR + CLKCTL_CHSCCDR);
+
+ /* EPDC AXI clk enable */
+ reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR3);
+ reg |= 0x0030;
+ writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR3);
+
+ /* EPDC PIX clk from PFD_540M, set to 540/4/5 = 27MHz */
+ reg = readl(CCM_BASE_ADDR + CLKCTL_CSCDR2);
+ reg &= ~0x03F000;
+ reg |= (0x5 << 15) | (4 << 12);
+ writel(reg, CCM_BASE_ADDR + CLKCTL_CSCDR2);
+
+ reg = readl(CCM_BASE_ADDR + CLKCTL_CBCMR);
+ reg &= ~0x03800000;
+ reg |= (0x3 << 23);
+ writel(reg, CCM_BASE_ADDR + CLKCTL_CBCMR);
+
+ /* EPDC PIX clk enable */
+ reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR3);
+ reg |= 0x0C00;
+ writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR3);
+
+ panel_info.epdc_data.working_buf_addr = CONFIG_WORKING_BUF_ADDR;
+ panel_info.epdc_data.waveform_buf_addr = CONFIG_WAVEFORM_BUF_ADDR;
+
+ panel_info.epdc_data.wv_modes.mode_init = 0;
+ panel_info.epdc_data.wv_modes.mode_du = 1;
+ panel_info.epdc_data.wv_modes.mode_gc4 = 3;
+ panel_info.epdc_data.wv_modes.mode_gc8 = 2;
+ panel_info.epdc_data.wv_modes.mode_gc16 = 2;
+ panel_info.epdc_data.wv_modes.mode_gc32 = 2;
+
+ panel_info.epdc_data.epdc_timings = panel_timings;
+
+ setup_epdc_power();
+
+ /* Assign fb_base */
+ gd->fb_base = CONFIG_FB_BASE;
+}
+
+void epdc_power_on(void)
+{
+ unsigned int reg;
+
+ /* Set EPD_PWR_CTL0 to high - enable EINK_VDD (3.15) */
+ gpio_set_value(IMX_GPIO_NR(2, 7), 1);
+ udelay(1000);
+
+ /* Enable epdc signal pin */
+ epdc_enable_pins();
+
+ /* Set PMIC Wakeup to high - enable Display power */
+ gpio_set_value(IMX_GPIO_NR(2, 14), 1);
+
+ /* Wait for PWRGOOD == 1 */
+ while (1) {
+ reg = readl(GPIO2_BASE_ADDR + GPIO_PSR);
+ if (!(reg & (1 << 13)))
+ break;
+
+ udelay(100);
+ }
+
+ /* Enable VCOM */
+ gpio_set_value(IMX_GPIO_NR(2, 3), 1);
+
+ udelay(500);
+}
+
+void epdc_power_off(void)
+{
+ /* Set PMIC Wakeup to low - disable Display power */
+ gpio_set_value(IMX_GPIO_NR(2, 14), 0);
+
+ /* Disable VCOM */
+ gpio_set_value(IMX_GPIO_NR(2, 3), 0);
+
+ epdc_disable_pins();
+
+ /* Set EPD_PWR_CTL0 to low - disable EINK_VDD (3.15) */
+ gpio_set_value(IMX_GPIO_NR(2, 7), 0);
+}
+#endif
+
int board_init(void)
{
/* address of boot parameters */
@@ -348,6 +664,11 @@ int board_init(void)
setup_fec();
#endif
+#ifdef CONFIG_MXC_EPDC
+ setup_epdc();
+#endif
+ return 0;
+
#ifdef CONFIG_USB_EHCI_MX6
setup_usb();
#endif
@@ -355,6 +676,11 @@ int board_init(void)
return 0;
}
+u32 get_board_rev(void)
+{
+ return get_cpu_rev();
+}
+
int checkboard(void)
{
puts("Board: MX6SLEVK\n");