summaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/mx50_arm2/flash_header.S329
-rw-r--r--board/freescale/mx50_rdp/flash_header.S237
2 files changed, 487 insertions, 79 deletions
diff --git a/board/freescale/mx50_arm2/flash_header.S b/board/freescale/mx50_arm2/flash_header.S
index 8bdc530..30545a7 100644
--- a/board/freescale/mx50_arm2/flash_header.S
+++ b/board/freescale/mx50_arm2/flash_header.S
@@ -25,6 +25,159 @@
# error "Must define the offset of flash header"
#endif
+#if defined(CONFIG_ZQ_CALIB)
+.macro do_zq_calib
+/*=============================================================================
+ * ZQ calibration
+ *===========================================================================*/
+ ldr r0, =DATABAHN_BASE_ADDR
+
+/*=============================================================================
+ * Pu calibration start
+ *===========================================================================*/
+ ldr r1, =0x0
+pu_loop:
+ cmp r1, #0x20
+ beq pu_out
+
+ // pu<<16,pd=0
+ mov r2, r1, lsl #16
+ // Set SW_CFG1
+ str r2, [r0, #0x128]
+
+ // ((pd+1)<<8) | (pu+1)
+ add r1, r1, #0x1
+ ldr r2, =0x1
+ orr r3, r1, r2, lsl #8
+ // Set SW_CFG2
+ str r3, [r0, #0x12c]
+
+ sub r1, r1, #0x1
+
+ // Start ZQ comparator
+ ldr r2, =0x10000
+ str r2, [r0, #0x124]
+
+ // Delay 300ns at least
+ ldr r3, =0x0
+pu_delay:
+ add r3, r3, #0x1
+ cmp r3, #0x1000
+ bne pu_delay
+
+ // Read compare result
+ ldr r3, [r0,#0x14c]
+ and r3, r3, #0x1
+
+ // Stop ZQ comparator
+ ldr r2, =0x0
+ str r2, [r0, #0x124]
+
+ // Add pu value
+ add r1, r1, #0x1
+ cmp r3, #0x1
+ bne pu_loop
+
+pu_out:
+ // Pu calibration result in r1
+ sub r1, r1, #0x1
+
+/*=============================================================================
+ * PD calibration start
+ *===========================================================================*/
+ ldr r2, =0x0
+pd_loop:
+ cmp r2, #0xf
+ beq pd_out
+
+ // pd<<24 | pu<<16 | 1<<4
+ mov r3, r2, lsl #24
+ orr r3, r3, r1, lsl #16
+ orr r3, r3, #0x10
+ // Set SW_CFG1
+ str r3, [r0, #0x128]
+
+ // ((pd+1) << 8) | (pu+1)
+ add r2, r2, #0x1
+ add r1, r1, #0x1
+ mov r3, r2, LSL #8
+ orr r3, r3, r1
+ // Set SW_CFG2
+ str r3, [r0, #0x12c]
+
+ sub r2, r2, #0x1
+ sub r1, r1, #0x1
+
+ // Start ZQ comparator
+ ldr r3, =0x10000
+ str r3, [r0, #0x124]
+
+ // Delay 300ns at least
+ ldr r3, =0x0
+pd_delay:
+ add r3, r3, #0x1
+ cmp r3, #0x1000
+ bne pd_delay
+
+ // Read compare result
+ ldr r3, [r0, #0x14c]
+ and r3, r3, #0x1
+
+ // Stop ZQ comparator
+ ldr r8, =0x0
+ str r8, [r0, #0x124]
+
+ // Add pd value
+ add r2, r2, #0x1
+
+ cmp r3, #0x0
+ bne pd_loop
+
+ // Make sure r2 > 0
+ cmp r2, #0x0
+ beq pd_loop
+
+pd_out:
+ // Pd calibration result in r2
+ sub r2, r2, #0x2
+
+/*=============================================================================
+ * Software load PU/PD value,PU is stored in r1, and PD is stored in r2
+ *===========================================================================*/
+ /* ((pd + 1) << 24) | ((pu + 1) << 16) */
+ add r5, r1, #0x1
+ add r6, r2, #0x1
+ mov r3, r6, lsl #24
+ orr r3, r3, r5, lsl #16
+ /* Set SW_CFG1 */
+ str r3, [r0, #0x128]
+
+ /* (pd << 8) | pu */
+ mov r3, r2, lsl #8
+ orr r3, r3, r1
+ /* Set SW_CFG2 */
+ str r3, [r0, #0x12c]
+
+ /* Loading PU value, set pu_pd_sel=0 */
+ ldr r3, =0x310000
+ str r3, [r0, #0x124]
+ /* Clear for next load */
+ ldr r3, =0x200000
+ str r3, [r0, #0x124]
+
+ /* Loading PD value, set pu_pd_sel=1 */
+ ldr r3, =0x10
+ orr r3, r3, r6, lsl #24
+ orr r3, r3, r5, lsl #16
+ str r3, [r0, #0x128]
+
+ ldr r3, =0x310000
+ str r3, [r0, #0x124]
+ ldr r3, =0x200000
+ str r3, [r0, #0x124]
+.endm
+#endif
+
.section ".text.flasheader", "x"
b _start
.org CONFIG_FLASH_HEADER_OFFSET
@@ -62,7 +215,24 @@ plugin2: .long 0x0
plugin_start:
/* Save the return address and the function arguments */
- push {r0-r2, lr}
+ push {r0-r6, r8, lr}
+
+/* To return to ROM from plugin, we need to fill in these argument.
+ * Here is what need to do:
+ * Need to construct the paramters for this function before return to ROM:
+ * plugin_download(void **start, size_t *bytes, UINT32 *ivt_offset)
+ */
+ /* Check r0 if valid address
+ * Mfgtools or sb_loader run-plug maybe pass down invalidate data
+ */
+ cmp r0, #0xf8000000
+ mov r4, r0
+ ldr r3, DDR_DEST_ADDR
+ strhi r3, [r0]
+ ldr r3, COPY_SIZE
+ strhi r3, [r1]
+ ldr r3, IVT2_HDR_OFS
+ strhi r3, [r2]
/*=============================================================================
*init script for codex LPDDR1-200MHz CPU board
@@ -137,9 +307,9 @@ wait_pll1_lock:
* IOMUX
*===========================================================================*/
ldr r0, =0x53fa8000
- mov r1, #0x02000000
+ mov r1, #0x04000000
str r1, [r0, #0x6ac]
- mov r2, #0x00200000
+ ldr r2, =0x00180000
str r2, [r0, #0x6a4]
str r2, [r0, #0x668]
str r2, [r0, #0x698]
@@ -157,11 +327,44 @@ wait_pll1_lock:
str r2, [r0, #0x4cc]
str r2, [r0, #0x524]
+//*===========================================
+// DDR controller setting
+//*===========================================
+// CTL setting
+ ldr r0, =DATABAHN_BASE_ADDR
+
+#if defined(CONFIG_ZQ_CALIB)
+ do_zq_calib
+#else
+// setmem /32 0x1400012C = 0x00000817 // pd=<<8, pu=<<0
+ ldr r1, =0x00000817
+ str r1, [r0, #0x12c]
+// setmem /32 0x14000128 = 0x09180000 // (pd+1)<<24, (pu+1)<<16
+ ldr r1, =0x09180000
+ str r1, [r0, #0x128]
+// load PU, pu_pd_sel=0
+// setmem /32 0x14000124 = 0x00310000 // software load ZQ: 3<<20, 1<<16
+ ldr r1, =0x00310000
+ str r1, [r0, #0x124]
+// setmem /32 0x14000124 = 0x00200000 // clear for next load
+ ldr r1, =0x00200000
+ str r1, [r0, #0x124]
+// load PD, pu_pd_sel=1
+// setmem /32 0x14000128 = 0x09180010 // (pd+1)<<24, (pu+1)<<16, 1<<4
+ ldr r1, =0x09180010
+ str r1, [r0, #0x128]
+// setmem /32 0x14000124 = 0x00310000 // software load ZQ: 3<<20, 1<<16
+ ldr r1, =0x00310000
+ str r1, [r0, #0x124]
+// setmem /32 0x14000124 = 0x00200000 // clear for next load
+ ldr r1, =0x00200000
+ str r1, [r0, #0x124]
+#endif
+
/*=============================================================================
* DDR setting
*===========================================================================*/
- ldr r0, =DATABAHN_BASE_ADDR
/* setmem /32 0x14000000 = 0x00000500 */
ldr r1, =0x00000500
str r1, [r0, #0x0]
@@ -348,8 +551,8 @@ wait_pll1_lock:
/* setmem /32 0x14000118 = 0x01010002 */
ldr r1, =0x01010002
str r1, [r0, #0x118]
-/* setmem /32 0x1400011c = 0x00000000 */
- ldr r1, =0x00000000
+/* setmem /32 0x1400011c = 0x00001000 */
+ ldr r1, =0x00001000
str r1, [r0, #0x11c]
/* setmem /32 0x14000200 = 0x00000000 */
ldr r1, =0x00000000
@@ -490,8 +693,39 @@ wait_pll1_lock:
str r3, [r0, #0x24]
/* ---------- DDR SETUP ---------- */
-/* ldr r0, =CSP_BASE_REG_PA_DATABAHN */
- ldr r0, =0x14000000
+//*===========================================
+// DDR controller setting
+//*===========================================
+// CTL setting
+ ldr r0, =DATABAHN_BASE_ADDR
+
+#if defined(CONFIG_ZQ_CALIB)
+ do_zq_calib
+#else
+// setmem /32 0x1400012C = 0x00000817 // pd=<<8, pu=<<0
+ ldr r1, =0x00000817
+ str r1, [r0, #0x12c]
+// setmem /32 0x14000128 = 0x09180000 // (pd+1)<<24, (pu+1)<<16
+ ldr r1, =0x09180000
+ str r1, [r0, #0x128]
+// load PU, pu_pd_sel=0
+// setmem /32 0x14000124 = 0x00310000 // software load ZQ: 3<<20, 1<<16
+ ldr r1, =0x00310000
+ str r1, [r0, #0x124]
+// setmem /32 0x14000124 = 0x00200000 // clear for next load
+ ldr r1, =0x00200000
+ str r1, [r0, #0x124]
+// load PD, pu_pd_sel=1
+// setmem /32 0x14000128 = 0x09180010 // (pd+1)<<24, (pu+1)<<16, 1<<4
+ ldr r1, =0x09180010
+ str r1, [r0, #0x128]
+// setmem /32 0x14000124 = 0x00310000 // software load ZQ: 3<<20, 1<<16
+ ldr r1, =0x00310000
+ str r1, [r0, #0x124]
+// setmem /32 0x14000124 = 0x00200000 // clear for next load
+ ldr r1, =0x00200000
+ str r1, [r0, #0x124]
+#endif
/* CTL setting */
/* setmem /32 0x14000000 = 0x00000400 */
@@ -707,8 +941,8 @@ wait_pll1_lock:
/* setmem /32 0x14000118 = 0x01010002 */
ldr r1, =0x01010002
str r1, [r0, #0x118]
-/* setmem /32 0x1400011c = 0x00000000 */
- ldr r1, =0x00000000
+/* setmem /32 0x1400011c = 0x00001000 */
+ ldr r1, =0x00001000
str r1, [r0, #0x11c]
/* setmem /32 0x14000120 = 0x00000000 */
ldr r1, =0x00000000
@@ -862,8 +1096,8 @@ wait_pll1_lock:
* IOMUX
*=================================================================*/
ldr r0, =0x53fa8600
- mov r1, #0x02000000
- mov r3, #0x00200000
+ mov r1, #0x00000000
+ mov r3, #0x00380000
mov r2, #0x0
str r1, [r0, #0xac]
str r2, [r0, #0x6c]
@@ -888,10 +1122,43 @@ wait_pll1_lock:
str r3, [r0, #0xcc]
str r3, [r0, #0x124]
+//*===========================================
+// DDR controller setting
+//*===========================================
+// CTL setting
+ ldr r0, =DATABAHN_BASE_ADDR
+
+#if defined(CONFIG_ZQ_CALIB)
+ do_zq_calib
+#else
+// setmem /32 0x1400012C = 0x00000817 // pd=<<8, pu=<<0
+ ldr r1, =0x00000817
+ str r1, [r0, #0x12c]
+// setmem /32 0x14000128 = 0x09180000 // (pd+1)<<24, (pu+1)<<16
+ ldr r1, =0x09180000
+ str r1, [r0, #0x128]
+// load PU, pu_pd_sel=0
+// setmem /32 0x14000124 = 0x00310000 // software load ZQ: 3<<20, 1<<16
+ ldr r1, =0x00310000
+ str r1, [r0, #0x124]
+// setmem /32 0x14000124 = 0x00200000 // clear for next load
+ ldr r1, =0x00200000
+ str r1, [r0, #0x124]
+// load PD, pu_pd_sel=1
+// setmem /32 0x14000128 = 0x09180010 // (pd+1)<<24, (pu+1)<<16, 1<<4
+ ldr r1, =0x09180010
+ str r1, [r0, #0x128]
+// setmem /32 0x14000124 = 0x00310000 // software load ZQ: 3<<20, 1<<16
+ ldr r1, =0x00310000
+ str r1, [r0, #0x124]
+// setmem /32 0x14000124 = 0x00200000 // clear for next load
+ ldr r1, =0x00200000
+ str r1, [r0, #0x124]
+#endif
+
/*==============================================================
* DDR setting
*=============================================================*/
- ldr r0, =DATABAHN_BASE_ADDR
/* setmem /32 0x14000000 = 0x00000100 */
ldr r1, =0x00000100
str r1, [r0, #0x0]
@@ -1139,6 +1406,7 @@ wait_pll1_lock:
* Final image size on exit.
* boot_data - Initial @ref ivt Boot Data load address.
*/
+
ldr r0, =ROM_SI_REV
ldr r1, [r0]
cmp r1, #0x11
@@ -1148,34 +1416,23 @@ wait_pll1_lock:
adr r2, BOOT_DATA
before_calling_rom___pu_irom_hwcnfg_setup:
- mov r4, #0x2a00
+ mov r3, #0x2a00
/* Different ROM address for TO 1.0 & TO 1.1.1 */
- addeq r4, r4, #0xad
- addne r4, r4, #0x19
- blx r4
+ addeq r3, r3, #0xad
+ addne r3, r3, #0x19
+ cmp r4, #0xf8000000
+ blxhi r3
after_calling_rom___pu_irom_hwcnfg_setup:
-
-/* To return to ROM from plugin, we need to fill in these argument.
- * Here is what need to do:
- * Need to construct the paramters for this function before return to ROM:
- * plugin_download(void **start, size_t *bytes, UINT32 *ivt_offset)
- */
- pop {r0-r2, lr}
- ldr r3, DDR_DEST_ADDR
- str r3, [r0]
- ldr r3, COPY_SIZE
- str r3, [r1]
- mov r3, #0x400 /* Point to the second IVT table at offset 0x42C */
- add r3, r3, #0x2C
- str r3, [r2]
+ pop {r0-r6, r8, lr}
mov r0, #1
bx lr /* return back to ROM code */
-DDR_DEST_ADDR: .word TEXT_BASE
-COPY_SIZE: .word _end - TEXT_BASE
-BOOT_DATA: .word TEXT_BASE
- .word _end - TEXT_BASE /*data be copied by pu_irom_hwcnfg_setup()*/
- .word 0
+DDR_DEST_ADDR: .word TEXT_BASE
+COPY_SIZE: .word _end - TEXT_BASE
+BOOT_DATA: .word TEXT_BASE
+ .word _end - TEXT_BASE /*data be copied by pu_irom_hwcnfg_setup()*/
+ .word 0
+IVT2_HDR_OFS: .word ivt2_header - TEXT_BASE
#endif
diff --git a/board/freescale/mx50_rdp/flash_header.S b/board/freescale/mx50_rdp/flash_header.S
index 51ee20a..7a547d9 100644
--- a/board/freescale/mx50_rdp/flash_header.S
+++ b/board/freescale/mx50_rdp/flash_header.S
@@ -25,6 +25,159 @@
# error "Must define the offset of flash header"
#endif
+#if defined(CONFIG_ZQ_CALIB)
+.macro do_zq_calib
+/*=============================================================================
+ * ZQ calibration
+ *===========================================================================*/
+ ldr r0, =DATABAHN_BASE_ADDR
+
+/*=============================================================================
+ * Pu calibration start
+ *===========================================================================*/
+ ldr r1, =0x0
+pu_loop:
+ cmp r1, #0x20
+ beq pu_out
+
+ // pu<<16,pd=0
+ mov r2, r1, lsl #16
+ // Set SW_CFG1
+ str r2, [r0, #0x128]
+
+ // ((pd+1)<<8) | (pu+1)
+ add r1, r1, #0x1
+ ldr r2, =0x1
+ orr r3, r1, r2, lsl #8
+ // Set SW_CFG2
+ str r3, [r0, #0x12c]
+
+ sub r1, r1, #0x1
+
+ // Start ZQ comparator
+ ldr r2, =0x10000
+ str r2, [r0, #0x124]
+
+ // Delay 300ns at least
+ ldr r3, =0x0
+pu_delay:
+ add r3, r3, #0x1
+ cmp r3, #0x1000
+ bne pu_delay
+
+ // Read compare result
+ ldr r3, [r0,#0x14c]
+ and r3, r3, #0x1
+
+ // Stop ZQ comparator
+ ldr r2, =0x0
+ str r2, [r0, #0x124]
+
+ // Add pu value
+ add r1, r1, #0x1
+ cmp r3, #0x1
+ bne pu_loop
+
+pu_out:
+ // Pu calibration result in r1
+ sub r1, r1, #0x1
+
+/*=============================================================================
+ * PD calibration start
+ *===========================================================================*/
+ ldr r2, =0x0
+pd_loop:
+ cmp r2, #0xf
+ beq pd_out
+
+ // pd<<24 | pu<<16 | 1<<4
+ mov r3, r2, lsl #24
+ orr r3, r3, r1, lsl #16
+ orr r3, r3, #0x10
+ // Set SW_CFG1
+ str r3, [r0, #0x128]
+
+ // ((pd+1) << 8) | (pu+1)
+ add r2, r2, #0x1
+ add r1, r1, #0x1
+ mov r3, r2, LSL #8
+ orr r3, r3, r1
+ // Set SW_CFG2
+ str r3, [r0, #0x12c]
+
+ sub r2, r2, #0x1
+ sub r1, r1, #0x1
+
+ // Start ZQ comparator
+ ldr r3, =0x10000
+ str r3, [r0, #0x124]
+
+ // Delay 300ns at least
+ ldr r3, =0x0
+pd_delay:
+ add r3, r3, #0x1
+ cmp r3, #0x1000
+ bne pd_delay
+
+ // Read compare result
+ ldr r3, [r0, #0x14c]
+ and r3, r3, #0x1
+
+ // Stop ZQ comparator
+ ldr r8, =0x0
+ str r8, [r0, #0x124]
+
+ // Add pd value
+ add r2, r2, #0x1
+
+ cmp r3, #0x0
+ bne pd_loop
+
+ // Make sure r2 > 0
+ cmp r2, #0x0
+ beq pd_loop
+
+pd_out:
+ // Pd calibration result in r2
+ sub r2, r2, #0x2
+
+/*=============================================================================
+ * Software load PU/PD value,PU is stored in r1, and PD is stored in r2
+ *===========================================================================*/
+ /* ((pd + 1) << 24) | ((pu + 1) << 16) */
+ add r5, r1, #0x1
+ add r6, r2, #0x1
+ mov r3, r6, lsl #24
+ orr r3, r3, r5, lsl #16
+ /* Set SW_CFG1 */
+ str r3, [r0, #0x128]
+
+ /* (pd << 8) | pu */
+ mov r3, r2, lsl #8
+ orr r3, r3, r1
+ /* Set SW_CFG2 */
+ str r3, [r0, #0x12c]
+
+ /* Loading PU value, set pu_pd_sel=0 */
+ ldr r3, =0x310000
+ str r3, [r0, #0x124]
+ /* Clear for next load */
+ ldr r3, =0x200000
+ str r3, [r0, #0x124]
+
+ /* Loading PD value, set pu_pd_sel=1 */
+ ldr r3, =0x10
+ orr r3, r3, r6, lsl #24
+ orr r3, r3, r5, lsl #16
+ str r3, [r0, #0x128]
+
+ ldr r3, =0x310000
+ str r3, [r0, #0x124]
+ ldr r3, =0x200000
+ str r3, [r0, #0x124]
+.endm
+#endif
+
.section ".text.flasheader", "x"
b _start
.org CONFIG_FLASH_HEADER_OFFSET
@@ -61,7 +214,7 @@ plugin2: .long 0x0
plugin_start:
/* Save the return address and the function arguments */
- push {r0-r4, lr}
+ push {r0-r6, r8, lr}
/* To return to ROM from plugin, we need to fill in these argument.
* Here is what need to do:
@@ -77,8 +230,7 @@ plugin_start:
strhi r3, [r0]
ldr r3, COPY_SIZE
strhi r3, [r1]
- mov r3, #0x400 /* Point to the second IVT table at offset 0x42C */
- add r3, r3, #0x2C
+ ldr r3, IVT2_HDR_OFS
strhi r3, [r2]
/*=============================================================================
@@ -153,7 +305,7 @@ wait_pll1_lock:
*===========================================================================*/
ldr r0, =0x53fa8600
mov r1, #0x04000000
- mov r3, #0x00180000
+ ldr r3, =0x00180000
mov r2, #0x0
//setmem /32 0x53fa86ac = 0x04000000
//IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE, ddr_sel=2'b01 (LPDDR2)
@@ -213,37 +365,35 @@ wait_pll1_lock:
// DDR controller setting
//*===========================================
// CTL setting
- ldr r0, =DATABAHN_BASE_ADDR
-
-//*==========================================
-// Load ZQ
-//*==========================================
-//setmem /32 0x14000128 = 0x00170101 // load PU
- ldr r1, =0x00170101
- str r1, [r0, #0x128]
-
- ldr r1, =0x1000
-delay0:
- sub r1, r1, #0x1
- cmp r1, #0x0
- bne delay0
-
-//setmem /32 0x14000128 = 0x00000000 // clear
- ldr r1, =0x00000000
- str r1, [r0, #0x128]
-//setmem /32 0x14000128 = 0x08170111 // load PD
- ldr r1, =0x08170111
- str r1, [r0, #0x128]
-
- ldr r1, =0x1000
-delay1:
- sub r1, r1, #0x1
- cmp r1, #0x0
- bne delay1
-
-//setmem /32 0x14000128 = 0x00000000 // clear
- ldr r1, =0x00000000
- str r1, [r0, #0x128]
+ ldr r0, =DATABAHN_BASE_ADDR
+
+#if defined(CONFIG_ZQ_CALIB)
+ do_zq_calib
+#else
+// setmem /32 0x1400012C = 0x00000817 // pd=<<8, pu=<<0
+ ldr r1, =0x00000817
+ str r1, [r0, #0x12c]
+// setmem /32 0x14000128 = 0x09180000 // (pd+1)<<24, (pu+1)<<16
+ ldr r1, =0x09180000
+ str r1, [r0, #0x128]
+// load PU, pu_pd_sel=0
+// setmem /32 0x14000124 = 0x00310000 // software load ZQ: 3<<20, 1<<16
+ ldr r1, =0x00310000
+ str r1, [r0, #0x124]
+// setmem /32 0x14000124 = 0x00200000 // clear for next load
+ ldr r1, =0x00200000
+ str r1, [r0, #0x124]
+// load PD, pu_pd_sel=1
+// setmem /32 0x14000128 = 0x09180010 // (pd+1)<<24, (pu+1)<<16, 1<<4
+ ldr r1, =0x09180010
+ str r1, [r0, #0x128]
+// setmem /32 0x14000124 = 0x00310000 // software load ZQ: 3<<20, 1<<16
+ ldr r1, =0x00310000
+ str r1, [r0, #0x124]
+// setmem /32 0x14000124 = 0x00200000 // clear for next load
+ ldr r1, =0x00200000
+ str r1, [r0, #0x124]
+#endif
//setmem /32 0x14000000 = 0x00000500
ldr r1, =0x00000500
@@ -450,8 +600,8 @@ delay1:
ldr r1, =0x01010002
str r1, [r0, #0x118]
-//setmem /32 0x1400011c = 0x00000000
- ldr r1, =0x00000000
+//setmem /32 0x1400011c = 0x00001000
+ ldr r1, =0x00001000
str r1, [r0, #0x11c]
// PHY setting
@@ -594,14 +744,15 @@ before_calling_rom___pu_irom_hwcnfg_setup:
blxhi r3
after_calling_rom___pu_irom_hwcnfg_setup:
- pop {r0-r4, lr}
+ pop {r0-r6, r8, lr}
mov r0, #1
bx lr /* return back to ROM code */
-DDR_DEST_ADDR: .word TEXT_BASE
-COPY_SIZE: .word _end - TEXT_BASE
-BOOT_DATA: .word TEXT_BASE
- .word _end - TEXT_BASE
- .word 0
+DDR_DEST_ADDR: .word TEXT_BASE
+COPY_SIZE: .word _end - TEXT_BASE
+BOOT_DATA: .word TEXT_BASE
+ .word _end - TEXT_BASE
+ .word 0
+IVT2_HDR_OFS: .word ivt2_header - TEXT_BASE
#endif
generated by cgit v1.1 at 2024-12-30 07:30:31 +0000