diff options
Diffstat (limited to 'board/freescale/t1040qds')
| -rw-r--r-- | board/freescale/t1040qds/diu.c | 134 |
1 files changed, 8 insertions, 126 deletions
diff --git a/board/freescale/t1040qds/diu.c b/board/freescale/t1040qds/diu.c index ffd074b..0214224 100644 --- a/board/freescale/t1040qds/diu.c +++ b/board/freescale/t1040qds/diu.c @@ -13,42 +13,9 @@ #include <video_fb.h> #include <fsl_diu_fb.h> #include "../common/qixis.h" +#include "../common/diu_ch7301.h" #include "t1040qds.h" #include "t1040qds_qixis.h" -#include <i2c.h> - - -#define I2C_DVI_INPUT_DATA_FORMAT_REG 0x1F -#define I2C_DVI_PLL_CHARGE_CNTL_REG 0x33 -#define I2C_DVI_PLL_DIVIDER_REG 0x34 -#define I2C_DVI_PLL_SUPPLY_CNTL_REG 0x35 -#define I2C_DVI_PLL_FILTER_REG 0x36 -#define I2C_DVI_TEST_PATTERN_REG 0x48 -#define I2C_DVI_POWER_MGMT_REG 0x49 -#define I2C_DVI_LOCK_STATE_REG 0x4D -#define I2C_DVI_SYNC_POLARITY_REG 0x56 - -/* - * Set VSYNC/HSYNC to active high. This is polarity of sync signals - * from DIU->DVI. The DIU default is active igh, so DVI is set to - * active high. - */ -#define I2C_DVI_INPUT_DATA_FORMAT_VAL 0x98 - -#define I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL 0x06 -#define I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL 0x26 -#define I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL 0xA0 -#define I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL 0x08 -#define I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL 0x16 -#define I2C_DVI_PLL_FILTER_LOW_SPEED_VAL 0x60 - -/* Clear test pattern */ -#define I2C_DVI_TEST_PATTERN_VAL 0x18 -/* Exit Power-down mode */ -#define I2C_DVI_POWER_MGMT_VAL 0xC0 - -/* Monitor polarity is handled via DVI Sync Polarity Register */ -#define I2C_DVI_SYNC_POLARITY_VAL 0x00 /* * DIU Area Descriptor @@ -69,98 +36,6 @@ #define AD_COMP_1_SHIFT 4 #define AD_COMP_0_SHIFT 0 -/* Programming of HDMI Chrontel CH7301 connector */ -int diu_set_dvi_encoder(unsigned int pixclock) -{ - int ret; - u8 temp; - select_i2c_ch_pca9547(I2C_MUX_CH_DIU); - - temp = I2C_DVI_TEST_PATTERN_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_TEST_PATTERN_REG, 1, - &temp, 1); - if (ret) { - puts("I2C: failed to select proper dvi test pattern\n"); - return ret; - } - temp = I2C_DVI_INPUT_DATA_FORMAT_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_INPUT_DATA_FORMAT_REG, - 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi input data format\n"); - return ret; - } - - /* Set Sync polarity register */ - temp = I2C_DVI_SYNC_POLARITY_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_SYNC_POLARITY_REG, 1, - &temp, 1); - if (ret) { - puts("I2C: failed to select dvi syc polarity\n"); - return ret; - } - - /* Set PLL registers based on pixel clock rate*/ - if (pixclock > 65000000) { - temp = I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_CHARGE_CNTL_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll charge_cntl\n"); - return ret; - } - temp = I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_DIVIDER_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll divider\n"); - return ret; - } - temp = I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_FILTER_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll filter\n"); - return ret; - } - } else { - temp = I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_CHARGE_CNTL_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll charge_cntl\n"); - return ret; - } - temp = I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_DIVIDER_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll divider\n"); - return ret; - } - temp = I2C_DVI_PLL_FILTER_LOW_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_FILTER_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll filter\n"); - return ret; - } - } - - temp = I2C_DVI_POWER_MGMT_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_POWER_MGMT_REG, 1, - &temp, 1); - if (ret) { - puts("I2C: failed to select dvi power mgmt\n"); - return ret; - } - - udelay(500); - - select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); - return 0; -} - void diu_set_pixel_clock(unsigned int pixclock) { unsigned long speed_ccb, temp; @@ -172,12 +47,19 @@ void diu_set_pixel_clock(unsigned int pixclock) pixval = speed_ccb / temp; /* Program HDMI encoder */ + /* Switch channel to DIU */ + select_i2c_ch_pca9547(I2C_MUX_CH_DIU); + + /* Set dispaly encoder */ ret = diu_set_dvi_encoder(temp); if (ret) { puts("Failed to set DVI encoder\n"); return; } + /* Switch channel to default */ + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + /* Program pixel clock */ out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR, ((pixval << PXCK_BITS_START) & PXCK_MASK)); |