diff options
Diffstat (limited to 'board/freescale/t102xrdb')
-rw-r--r-- | board/freescale/t102xrdb/ddr.c | 2 | ||||
-rw-r--r-- | board/freescale/t102xrdb/eth_t102xrdb.c | 4 | ||||
-rw-r--r-- | board/freescale/t102xrdb/t102xrdb.c | 12 | ||||
-rw-r--r-- | board/freescale/t102xrdb/t102xrdb.h | 2 |
4 files changed, 10 insertions, 10 deletions
diff --git a/board/freescale/t102xrdb/ddr.c b/board/freescale/t102xrdb/ddr.c index 9e1b16b..c09199f 100644 --- a/board/freescale/t102xrdb/ddr.c +++ b/board/freescale/t102xrdb/ddr.c @@ -136,7 +136,7 @@ found: popts->data_bus_width = DDR_DATA_BUS_WIDTH_32; #endif -#ifdef CONFIG_T1023RDB +#ifdef CONFIG_TARGET_T1023RDB popts->wrlvl_ctl_2 = 0x07070606; popts->half_strength_driver_enable = 1; popts->cpo_sample = 0x43; diff --git a/board/freescale/t102xrdb/eth_t102xrdb.c b/board/freescale/t102xrdb/eth_t102xrdb.c index 02b283d..dadfaf1 100644 --- a/board/freescale/t102xrdb/eth_t102xrdb.c +++ b/board/freescale/t102xrdb/eth_t102xrdb.c @@ -73,7 +73,7 @@ int board_eth_init(bd_t *bis) case 0x135: /* set the on-board 2.5G SGMII AQR105 PHY */ fm_info_set_phy_address(FM1_DTSEC3, SGMII_AQR_PHY_ADDR); -#ifdef CONFIG_T1023RDB +#ifdef CONFIG_TARGET_T1023RDB /* set the on-board 1G SGMII RTL8211F PHY */ fm_info_set_phy_address(FM1_DTSEC1, SGMII_RTK_PHY_ADDR); #endif @@ -92,7 +92,7 @@ int board_eth_init(bd_t *bis) fm_info_set_mdio(i, dev); break; case PHY_INTERFACE_MODE_SGMII: -#if defined(CONFIG_T1023RDB) +#if defined(CONFIG_TARGET_T1023RDB) dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); #elif defined(CONFIG_T1024RDB) dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME); diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c index 24df4b4..3174726 100644 --- a/board/freescale/t102xrdb/t102xrdb.c +++ b/board/freescale/t102xrdb/t102xrdb.c @@ -19,7 +19,7 @@ #include "t102xrdb.h" #ifdef CONFIG_T1024RDB #include "cpld.h" -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) #include <i2c.h> #include <mmc.h> #endif @@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_T1023RDB +#ifdef CONFIG_TARGET_T1023RDB enum { GPIO1_SD_SEL = 0x00020000, /* GPIO1_14, 0: eMMC, 1:SD/MMC */ GPIO1_EMMC_SEL, @@ -54,7 +54,7 @@ int checkboard(void) #if defined(CONFIG_T1024RDB) printf("Board rev: 0x%02x CPLD ver: 0x%02x, ", CPLD_READ(hw_ver), CPLD_READ(sw_ver)); -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) printf("Rev%c, ", t1023rdb_ctrl(GPIO3_GET_VERSION) + 'B'); #endif printf("boot from "); @@ -74,7 +74,7 @@ int checkboard(void) reg = ((reg & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT); printf("NOR vBank%d\n", reg); } -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) #ifdef CONFIG_NAND puts("NAND\n"); #else @@ -196,7 +196,7 @@ int ft_board_setup(void *blob, bd_t *bd) fdt_fixup_board_enet(blob); #endif -#ifdef CONFIG_T1023RDB +#ifdef CONFIG_TARGET_T1023RDB if (t1023rdb_ctrl(GPIO3_GET_VERSION) > 0) fdt_enable_nor(blob); #endif @@ -204,7 +204,7 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } -#ifdef CONFIG_T1023RDB +#ifdef CONFIG_TARGET_T1023RDB /* Enable NOR flash for RevC */ static void fdt_enable_nor(void *blob) { diff --git a/board/freescale/t102xrdb/t102xrdb.h b/board/freescale/t102xrdb/t102xrdb.h index ae5c60f..6634e7a 100644 --- a/board/freescale/t102xrdb/t102xrdb.h +++ b/board/freescale/t102xrdb/t102xrdb.h @@ -9,7 +9,7 @@ void fdt_fixup_board_enet(void *blob); void pci_of_setup(void *blob, bd_t *bd); -#ifdef CONFIG_T1023RDB +#ifdef CONFIG_TARGET_T1023RDB static u32 t1023rdb_ctrl(u32 ctrl_type); static void fdt_enable_nor(void *blob); #endif |