diff options
Diffstat (limited to 'board/freescale/p2020ds/p2020ds.c')
-rw-r--r-- | board/freescale/p2020ds/p2020ds.c | 263 |
1 files changed, 0 insertions, 263 deletions
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c deleted file mode 100644 index 5d18e8d..0000000 --- a/board/freescale/p2020ds/p2020ds.c +++ /dev/null @@ -1,263 +0,0 @@ -/* - * Copyright 2007-2012 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/cache.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_pci.h> -#include <fsl_ddr_sdram.h> -#include <asm/io.h> -#include <asm/fsl_serdes.h> -#include <miiphy.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <fsl_mdio.h> -#include <tsec.h> -#include <asm/fsl_law.h> -#include <netdev.h> - -#include "../common/ngpixis.h" -#include "../common/sgmii_riser.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ -#ifdef CONFIG_MMC - ccsr_gur_t *gur = (ccsr_gur_t *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - setbits_be32(&gur->pmuxcr, - (MPC85xx_PMUXCR_SDHC_CD | - MPC85xx_PMUXCR_SDHC_WP)); -#endif - - return 0; -} - -int checkboard(void) -{ - u8 sw; - - printf("Board: P2020DS Sys ID: 0x%02x, " - "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", - in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver)); - - sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH)); - sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT; - - if (sw < 0x8) - /* The lower two bits are the actual vbank number */ - printf("vBank: %d\n", sw & 3); - else - puts("Promjet\n"); - - return 0; -} - -#if !defined(CONFIG_DDR_SPD) -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ - -phys_size_t fixed_sdram(void) -{ - struct ccsr_ddr __iomem *ddr = - (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; - uint d_init; - - ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; - ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; - ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; - ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1; - ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; - ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTRL; - ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; - ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; - ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; - ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2; - ddr->ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL; - ddr->ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL; - ddr->ddr_cdr1 = CONFIG_SYS_DDR_CDR1; - ddr->timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4; - ddr->timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5; - - if (!strcmp("performance", getenv("perf_mode"))) { - /* Performance Mode Values */ - - ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG_PERF; - ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS_PERF; - ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS_PERF; - ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_PERF; - ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_PERF; - - asm("sync;isync"); - - udelay(500); - - ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL_PERF; - } else { - /* Stable Mode Values */ - - ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG; - ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; - ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS; - ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - - /* ECC will be assumed in stable mode */ - ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN; - ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS; - ddr->err_sbe = CONFIG_SYS_DDR_SBE; - - asm("sync;isync"); - - udelay(500); - - ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; - } - -#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - d_init = 1; - debug("DDR - 1st controller: memory initializing\n"); - /* - * Poll until memory is initialized. - * 512 Meg at 400 might hit this 200 times or so. - */ - while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) - udelay(1000); - debug("DDR: memory initialized\n\n"); - asm("sync; isync"); - udelay(500); -#endif - - if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE * 1024 * 1024, - LAW_TRGT_IF_DDR) < 0) { - printf("ERROR setting Local Access Windows for DDR\n"); - return 0; - }; - - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -} - -#endif - -#ifdef CONFIG_PCI -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} -#endif - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - int flash_esel = find_tlb_idx((void *)flashbase, 1); - - /* - * Remap Boot flash + PROMJET region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - if (flash_esel == -1) { - /* very unlikely unless something is messed up */ - puts("Error: Could not find TLB for FLASH BASE\n"); - flash_esel = 2; /* give our best effort to continue */ - } else { - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); - } - - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_256M, 1); - - return 0; -} - -#ifdef CONFIG_TSEC_ENET -int board_eth_init(bd_t *bis) -{ - struct fsl_pq_mdio_info mdio_info; - struct tsec_info_struct tsec_info[4]; - int num = 0; - -#ifdef CONFIG_TSEC1 - SET_STD_TSEC_INFO(tsec_info[num], 1); - num++; -#endif -#ifdef CONFIG_TSEC2 - SET_STD_TSEC_INFO(tsec_info[num], 2); - if (is_serdes_configured(SGMII_TSEC2)) { - puts("eTSEC2 is in sgmii mode.\n"); - tsec_info[num].flags |= TSEC_SGMII; - } - num++; -#endif -#ifdef CONFIG_TSEC3 - SET_STD_TSEC_INFO(tsec_info[num], 3); - if (is_serdes_configured(SGMII_TSEC3)) { - puts("eTSEC3 is in sgmii mode.\n"); - tsec_info[num].flags |= TSEC_SGMII; -} - num++; -#endif - - if (!num) { - printf("No TSECs initialized\n"); - - return 0; - } - -#ifdef CONFIG_FSL_SGMII_RISER - fsl_sgmii_riser_init(tsec_info, num); -#endif - - mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; - mdio_info.name = DEFAULT_MII_NAME; - - fsl_pq_mdio_init(bis, &mdio_info); - - tsec_eth_init(bis, tsec_info, num); - - return pci_eth_init(bis); -} -#endif - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, bd_t *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = getenv_bootm_low(); - size = getenv_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); - -#ifdef CONFIG_HAS_FSL_DR_USB - fdt_fixup_dr_usb(blob, bd); -#endif - - FT_FSL_PCI_SETUP; - -#ifdef CONFIG_FSL_SGMII_RISER - fsl_sgmii_riser_fdt_fixup(blob); -#endif - - return 0; -} -#endif |