diff options
Diffstat (limited to 'board/freescale/p1022ds')
| -rw-r--r-- | board/freescale/p1022ds/diu.c | 67 |
1 files changed, 57 insertions, 10 deletions
diff --git a/board/freescale/p1022ds/diu.c b/board/freescale/p1022ds/diu.c index 12b40a0..8f5305c 100644 --- a/board/freescale/p1022ds/diu.c +++ b/board/freescale/p1022ds/diu.c @@ -32,6 +32,7 @@ #define PMUXCR_ELBCDIU_MASK 0xc0000000 #define PMUXCR_ELBCDIU_NOR16 0x80000000 +#define PMUXCR_ELBCDIU_DIU 0x40000000 /* * DIU Area Descriptor @@ -131,9 +132,8 @@ int platform_diu_init(unsigned int *xres, unsigned int *yres) px_brdcfg0 = in_8(lbc_lcs1_ba); out_8(lbc_lcs1_ba, px_brdcfg0 | PX_BRDCFG0_ELBC_DIU); - /* Setting PMUXCR to switch to DVI from ELBC */ - clrsetbits_be32(&gur->pmuxcr, - PMUXCR_ELBCDIU_MASK, PMUXCR_ELBCDIU_NOR16); + /* Set PMUXCR to switch the muxed pins from the LBC to the DIU */ + clrsetbits_be32(&gur->pmuxcr, PMUXCR_ELBCDIU_MASK, PMUXCR_ELBCDIU_DIU); pmuxcr = in_be32(&gur->pmuxcr); return fsl_diu_init(*xres, pixel_format, 0); @@ -161,7 +161,7 @@ static int set_mux_to_lbc(void) ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; /* Switch the muxes only if they're currently set to DIU mode */ - if ((in_be32(&gur->pmuxcr) & PMUXCR_ELBCDIU_MASK) == + if ((in_be32(&gur->pmuxcr) & PMUXCR_ELBCDIU_MASK) != PMUXCR_ELBCDIU_NOR16) { /* * In DIU mode, the PIXIS can only be accessed indirectly @@ -216,8 +216,17 @@ void flash_write8(u8 value, void *addr) int sw = set_mux_to_lbc(); __raw_writeb(value, addr); - if (sw) + if (sw) { + /* + * To ensure the post-write is completed to eLBC, software must + * perform a dummy read from one valid address from eLBC space + * before changing the eLBC_DIU from NOR mode to DIU mode. + * set_mux_to_diu() includes a sync that will ensure the + * __raw_readb() completes before it switches the mux. + */ + __raw_readb(addr); set_mux_to_diu(); + } } void flash_write16(u16 value, void *addr) @@ -225,8 +234,17 @@ void flash_write16(u16 value, void *addr) int sw = set_mux_to_lbc(); __raw_writew(value, addr); - if (sw) + if (sw) { + /* + * To ensure the post-write is completed to eLBC, software must + * perform a dummy read from one valid address from eLBC space + * before changing the eLBC_DIU from NOR mode to DIU mode. + * set_mux_to_diu() includes a sync that will ensure the + * __raw_readb() completes before it switches the mux. + */ + __raw_readb(addr); set_mux_to_diu(); + } } void flash_write32(u32 value, void *addr) @@ -234,18 +252,47 @@ void flash_write32(u32 value, void *addr) int sw = set_mux_to_lbc(); __raw_writel(value, addr); - if (sw) + if (sw) { + /* + * To ensure the post-write is completed to eLBC, software must + * perform a dummy read from one valid address from eLBC space + * before changing the eLBC_DIU from NOR mode to DIU mode. + * set_mux_to_diu() includes a sync that will ensure the + * __raw_readb() completes before it switches the mux. + */ + __raw_readb(addr); set_mux_to_diu(); + } } void flash_write64(u64 value, void *addr) { int sw = set_mux_to_lbc(); + uint32_t *p = addr; - /* There is no __raw_writeq(), so do the write manually */ - *(volatile u64 *)addr = value; - if (sw) + /* + * There is no __raw_writeq(), so do the write manually. We don't trust + * the compiler, so we use inline assembly. + */ + __asm__ __volatile__( + "stw%U0%X0 %2,%0;\n" + "stw%U1%X1 %3,%1;\n" + : "=m" (*p), "=m" (*(p + 1)) + : "r" ((uint32_t) (value >> 32)), "r" ((uint32_t) (value))); + + if (sw) { + /* + * To ensure the post-write is completed to eLBC, software must + * perform a dummy read from one valid address from eLBC space + * before changing the eLBC_DIU from NOR mode to DIU mode. We + * read addr+4 because we just wrote to addr+4, so that's how we + * maintain execution order. set_mux_to_diu() includes a sync + * that will ensure the __raw_readb() completes before it + * switches the mux. + */ + __raw_readb(addr + 4); set_mux_to_diu(); + } } u8 flash_read8(void *addr) |