diff options
Diffstat (limited to 'board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c')
-rw-r--r-- | board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c | 64 |
1 files changed, 24 insertions, 40 deletions
diff --git a/board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c b/board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c index cd1dabe..6122308 100644 --- a/board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c +++ b/board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c @@ -18,6 +18,9 @@ #include <mmc.h> #include <miiphy.h> #include <netdev.h> +#include <power/pmic.h> +#include <power/pfuze300_pmic.h> +#include "../common/pfuze.h" #ifdef CONFIG_SYS_I2C_MXC #include <i2c.h> #include <asm/imx-common/mxc_i2c.h> @@ -586,42 +589,31 @@ static const struct boot_mode board_boot_modes[] = { }; #endif -#ifdef CONFIG_PFUZE3000_PMIC_I2C -#define PFUZE_DEVICEID 0x0 -#define PFUZE_REVID 0x3 -#define PFUZE_FABID 0x4 - -#define PFUZE_LDOGCTL 0x69 - -static int setup_pmic_voltages(void) +#ifdef CONFIG_POWER +#define I2C_PMIC 0 +int power_init_board(void) { - unsigned char value, rev_id = 0; + struct pmic *p; + int ret; + unsigned int reg, rev_id; - i2c_set_bus_num(CONFIG_PMIC_I2C_BUS); + ret = power_pfuze300_init(I2C_PMIC); + if (ret) + return ret; - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_PMIC_I2C_SLAVE); - if (!i2c_probe(CONFIG_PMIC_I2C_SLAVE)) { - if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE_DEVICEID, 1, &value, 1)) { - printf("Read device ID error!\n"); - return -1; - } - if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE_REVID, 1, &rev_id, 1)) { - printf("Read Rev ID error!\n"); - return -1; - } - printf("Found PFUZE300! deviceid 0x%x, revid 0x%x\n", value, rev_id); + p = pmic_get("PFUZE300"); + ret = pmic_probe(p); + if (ret) + return ret; - /* disable Low Power Mode during standby mode */ - if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE_LDOGCTL, 1, &value, 1)) { - printf("Read LDOCTL error!\n"); - return -1; - } - value |= 0x1; - if (i2c_write(CONFIG_PMIC_I2C_SLAVE, PFUZE_LDOGCTL, 1, &value, 1)) { - printf("Set LDOCTL error!\n"); - return -1; - } - } + pmic_reg_read(p, PFUZE300_DEVICEID, ®); + pmic_reg_read(p, PFUZE300_REVID, &rev_id); + printf("PMIC: PFUZE300 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id); + + /* disable Low Power Mode during standby mode */ + pmic_reg_read(p, PFUZE300_LDOGCTL, ®); + reg |= 0x1; + pmic_reg_write(p, PFUZE300_LDOGCTL, reg); return 0; } @@ -633,14 +625,6 @@ int board_late_init(void) add_board_boot_modes(board_boot_modes); #endif -#ifdef CONFIG_PFUZE3000_PMIC_I2C - int ret = 0; - - ret = setup_pmic_voltages(); - if (ret) - return ret; -#endif - #ifdef CONFIG_ENV_IS_IN_MMC board_late_mmc_init(); #endif |