diff options
Diffstat (limited to 'board/freescale/mx6sxscm/mx6sxscm.c')
-rw-r--r-- | board/freescale/mx6sxscm/mx6sxscm.c | 927 |
1 files changed, 927 insertions, 0 deletions
diff --git a/board/freescale/mx6sxscm/mx6sxscm.c b/board/freescale/mx6sxscm/mx6sxscm.c new file mode 100644 index 0000000..6ec7926 --- /dev/null +++ b/board/freescale/mx6sxscm/mx6sxscm.c @@ -0,0 +1,927 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/clock.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/mx6-pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> +#include <asm/imx-common/boot_mode.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/boot_mode.h> +#include <asm/io.h> +#include <asm/imx-common/mxc_i2c.h> +#include <linux/sizes.h> +#include <common.h> +#include <fsl_esdhc.h> +#include <mmc.h> +#include <i2c.h> +#include <miiphy.h> +#include <netdev.h> +#include <power/pmic.h> +#include <power/pfuze100_pmic.h> +#include "../common/pfuze.h" +#include <usb.h> +#include <usb/ehci-fsl.h> +#include <asm/imx-common/video.h> +#include <micrel.h> + +#ifdef CONFIG_IMX_RDC +#include <asm/imx-common/rdc-sema.h> +#include <asm/arch/imx-rdc.h> +#endif + +#ifdef CONFIG_FSL_FASTBOOT +#include <fsl_fastboot.h> +#ifdef CONFIG_ANDROID_RECOVERY +#include <recovery.h> +#endif +#endif /*CONFIG_FSL_FASTBOOT*/ + +DECLARE_GLOBAL_DATA_PTR; +#define I2C_PMIC 1 + +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_ODE) + +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ + PAD_CTL_SPEED_HIGH | \ + PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST) + +#define ENET_CLK_PAD_CTRL (PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_120ohm | PAD_CTL_SRE_FAST) + +#define ENET_RX_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_SPEED_HIGH | PAD_CTL_SRE_FAST) + +#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_ODE) + +#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ + PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) + +#define BUTTON_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_22K_UP | PAD_CTL_DSE_40ohm) + +#define WDOG_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm) + +#define OTG_ID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_SIZE; + + return 0; +} + +static iomux_v3_cfg_t const uart3_pads[] = { + MX6_PAD_QSPI1B_SS0_B__UART3_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_QSPI1B_SCLK__UART3_RX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc2_pads[] = { + MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc3_pads[] = { + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA0__USDHC3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA1__USDHC3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA2__USDHC3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA3__USDHC3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA4__USDHC3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA5__USDHC3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA6__USDHC3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA7__USDHC3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + + /* CD pin */ + MX6_PAD_KEY_COL0__GPIO2_IO_10 | MUX_PAD_CTRL(NO_PAD_CTRL), + + /* RST_B, used for power reset cycle */ + MX6_PAD_KEY_COL1__GPIO2_IO_11 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc4_pads[] = { + MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA7__GPIO6_IO_21 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc4_emmc_pads[] = { + MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA4__USDHC4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA5__USDHC4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA6__USDHC4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA7__USDHC4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_RESET_B__USDHC4_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const wdog_b_pad = { + MX6_PAD_GPIO1_IO13__GPIO1_IO_13 | MUX_PAD_CTRL(WDOG_PAD_CTRL), +}; + +static iomux_v3_cfg_t const fec1_pads[] = { + MX6_PAD_GPIO1_IO04__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_GPIO1_IO05__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII1_RX_CTL__ENET1_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_RGMII1_RD0__ENET1_RX_DATA_0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_RGMII1_RD1__ENET1_RX_DATA_1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_RGMII1_RD2__ENET1_RX_DATA_2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_RGMII1_RD3__ENET1_RX_DATA_3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_RGMII1_RXC__ENET1_RX_CLK | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_RGMII1_TX_CTL__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII1_TD0__ENET1_TX_DATA_0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII1_TD1__ENET1_TX_DATA_1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII1_TD2__ENET1_TX_DATA_2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII1_TD3__ENET1_TX_DATA_3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII1_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), +}; + +static iomux_v3_cfg_t const peri_3v3_pads[] = { + MX6_PAD_QSPI1A_DATA0__GPIO4_IO_16 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; +static iomux_v3_cfg_t const phy_control_pads[] = { + /* 25MHz Ethernet PHY Clock */ + MX6_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M | + MUX_PAD_CTRL(ENET_CLK_PAD_CTRL), + + /* ENET PHY Power */ + MX6_PAD_QSPI1B_DATA1__GPIO4_IO_25 | MUX_PAD_CTRL(NO_PAD_CTRL), + + /* AR8031 PHY Reset */ + MX6_PAD_QSPI1B_DATA2__GPIO4_IO_26 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads)); +} + +static int setup_fec(int fec_id) +{ + struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; + struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; + int reg, ret; + + /* Use 125M anatop loopback REF_CLK1 for ENET1, + * clear gpr1[13], gpr1[17] */ + clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK, 0); + + ret = enable_fec_anatop_clock(fec_id, ENET_125MHZ); + if (ret) + return ret; + + imx_iomux_v3_setup_multiple_pads(phy_control_pads, + ARRAY_SIZE(phy_control_pads)); + + /* Enable the ENET power, active low */ + gpio_direction_output(IMX_GPIO_NR(4, 25) , 0); + + /* Reset AR8031 PHY */ + gpio_direction_output(IMX_GPIO_NR(4, 26) , 0); + mdelay(10); + gpio_set_value(IMX_GPIO_NR(4, 26), 1); + + reg = readl(&anatop->pll_enet); + reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE; + writel(reg, &anatop->pll_enet); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + imx_iomux_v3_setup_multiple_pads(fec1_pads, + ARRAY_SIZE(fec1_pads)); + + setup_fec(CONFIG_FEC_ENET_DEV); + + return cpu_eth_init(bis); +} + +int mx6_rgmii_rework(struct phy_device *phydev) +{ + /* add necessary delays for RGMII, + * there are no board skew delays added + * additional rx data delay = 0, rx clk delay = 0.3ns, total = 1.5ns + * additional tx data delay = -0.42ns, tx clk delay = 0.96ns, + * total = 1.38ns + */ + + if (ksz9031_phy_extended_write(phydev, 0x2, + MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0x0070)) + return -EIO; + + if (ksz9031_phy_extended_write(phydev, 0x2, + MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0x7777)) + return -EIO; + + if (ksz9031_phy_extended_write(phydev, 0x2, + MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0x0000)) + return -EIO; + + if (ksz9031_phy_extended_write(phydev, 0x2, + MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0x03f4)) + return -EIO; + + return 0; +} + +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) +/* I2C1 for PMIC */ +static struct i2c_pads_info i2c_pad_info1 = { + .scl = { + .i2c_mode = MX6_PAD_GPIO1_IO00__I2C1_SCL | PC, + .gpio_mode = MX6_PAD_GPIO1_IO00__GPIO1_IO_0 | PC, + .gp = IMX_GPIO_NR(1, 0), + }, + .sda = { + .i2c_mode = MX6_PAD_GPIO1_IO01__I2C1_SDA | PC, + .gpio_mode = MX6_PAD_GPIO1_IO01__GPIO1_IO_1 | PC, + .gp = IMX_GPIO_NR(1, 1), + }, +}; + +/* I2C2 */ +struct i2c_pads_info i2c_pad_info2 = { + .scl = { + .i2c_mode = MX6_PAD_GPIO1_IO02__I2C2_SCL | PC, + .gpio_mode = MX6_PAD_GPIO1_IO02__GPIO1_IO_2 | PC, + .gp = IMX_GPIO_NR(1, 2), + }, + .sda = { + .i2c_mode = MX6_PAD_GPIO1_IO03__I2C2_SDA | PC, + .gpio_mode = MX6_PAD_GPIO1_IO03__GPIO1_IO_3 | PC, + .gp = IMX_GPIO_NR(1, 3), + }, +}; + +/* I2C4 */ +struct i2c_pads_info i2c_pad_info4 = { + .scl = { + .i2c_mode = MX6_PAD_CSI_DATA06__I2C4_SCL | PC, + .gpio_mode = MX6_PAD_CSI_DATA06__GPIO1_IO_20 | PC, + .gp = IMX_GPIO_NR(1, 20), + }, + .sda = { + .i2c_mode = MX6_PAD_CSI_DATA07__I2C4_SDA | PC, + .gpio_mode = MX6_PAD_CSI_DATA07__GPIO1_IO_21 | PC, + .gp = IMX_GPIO_NR(1, 21), + }, +}; + +int power_init_board(void) +{ + struct pmic *pfuze; + unsigned int reg; + int ret; + + pfuze = pfuze_common_init(I2C_PMIC); + if (!pfuze) + return -ENODEV; + + ret = pfuze_mode_init(pfuze, APS_PFM); + if (ret < 0) + return ret; + /* set SW3A to 1.2V for LPDDR2 */ + pmic_reg_read(pfuze, PFUZE100_SW3AVOL, ®); + reg &= ~0x3f; + reg |= 0x20; + pmic_reg_write(pfuze, PFUZE100_SW3AVOL, reg); + + /* set SW3A standby volatage 1.2V */ + pmic_reg_read(pfuze, PFUZE100_SW3ASTBY, ®); + reg &= ~0x3f; + reg |= 0x20; + pmic_reg_write(pfuze, PFUZE100_SW3ASTBY, reg); + + /* set SW1AB normal volatage 1.350V */ + pmic_reg_read(pfuze, PFUZE100_SW1ABVOL, ®); + reg &= ~0x3f; + reg |= PFUZE100_SW1ABC_SETP(13500); + pmic_reg_write(pfuze, PFUZE100_SW1ABVOL, reg); + + /* set SW1AB standby volatage 1.10V */ + pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, ®); + reg &= ~0x3f; + reg |= PFUZE100_SW1ABC_SETP(11000); + pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg); + + /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, ®); + reg &= ~0xc0; + reg |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg); + + pmic_reg_read(pfuze, PFUZE100_VGEN3VOL, ®); + reg &= ~LDO_VOL_MASK; + reg |= (LDOB_2_80V | (1 << LDO_EN)); + pmic_reg_write(pfuze, PFUZE100_VGEN3VOL, reg); + + /* set SWBST boost regulator mode */ + pmic_reg_read(pfuze, PFUZE100_SWBSTCON1, ®); + reg &= ~SWBST_MODE_MASK; + reg |= SWBST_MODE_AUTO << SWBST_MODE_SHIFT; + reg |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SWBSTCON1, reg); + + return 0; +} + +#ifdef CONFIG_LDO_BYPASS_CHECK +void ldo_mode_set(int ldo_bypass) +{ + unsigned int value; + int is_400M; + u32 vddarm; + struct pmic *p = pmic_get("PFUZE100"); + + if (!p) { + printf("No PMIC found!\n"); + return; + } + + /* switch to ldo_bypass mode */ + if (ldo_bypass) { + prep_anatop_bypass(); + /* decrease VDDARM to 1.275V */ + pmic_reg_read(p, PFUZE100_SW1ABVOL, &value); + value &= ~0x3f; + value |= PFUZE100_SW1ABC_SETP(12750); + pmic_reg_write(p, PFUZE100_SW1ABVOL, value); + + /* decrease VDDSOC to 1.3V */ + pmic_reg_read(p, PFUZE100_SW1CVOL, &value); + value &= ~0x3f; + value |= PFUZE100_SW1ABC_SETP(13000); + pmic_reg_write(p, PFUZE100_SW1CVOL, value); + + is_400M = set_anatop_bypass(1); + if (is_400M) + vddarm = PFUZE100_SW1ABC_SETP(10750); + else + vddarm = PFUZE100_SW1ABC_SETP(11750); + + pmic_reg_read(p, PFUZE100_SW1ABVOL, &value); + value &= ~0x3f; + value |= vddarm; + pmic_reg_write(p, PFUZE100_SW1ABVOL, value); + + pmic_reg_read(p, PFUZE100_SW1CVOL, &value); + value &= ~0x3f; + value |= PFUZE100_SW1ABC_SETP(11750); + pmic_reg_write(p, PFUZE100_SW1CVOL, value); + + finish_anatop_bypass(); + printf("switch to ldo_bypass mode!\n"); + } +} +#endif + +#ifdef CONFIG_USB_EHCI_MX6 +#define USB_OTHERREGS_OFFSET 0x800 +#define UCTRL_PWR_POL (1 << 9) + +static iomux_v3_cfg_t const usb_otg_pads[] = { + /* OGT1 */ + MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL), + /* OTG2 */ + MX6_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL) +}; + +static void setup_usb(void) +{ + imx_iomux_v3_setup_multiple_pads(usb_otg_pads, + ARRAY_SIZE(usb_otg_pads)); +} + +int board_usb_phy_mode(int port) +{ + if (port == 1) + return USB_INIT_HOST; + else + return usb_phy_mode(port); +} + +int board_ehci_hcd_init(int port) +{ + u32 *usbnc_usb_ctrl; + + if (port > 1) + return -EINVAL; + + usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET + + port * 4); + + /* Set Power polarity */ + setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL); + + return 0; +} +#endif + +int board_phy_config(struct phy_device *phydev) +{ + mx6_rgmii_rework(phydev); + + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} +int board_early_init_f(void) +{ +#ifdef CONFIG_IMX_RDC + imx_rdc_setup_peripherals(shared_resources, + ARRAY_SIZE(shared_resources)); +#endif + +#ifdef CONFIG_SYS_AUXCORE_FASTUP + arch_auxiliary_core_up(0, CONFIG_SYS_AUXCORE_BOOTDATA); +#endif + + setup_iomux_uart(); + + return 0; +} + +static struct fsl_esdhc_cfg usdhc_cfg[3] = { + {USDHC2_BASE_ADDR, 0, 4}, + {USDHC3_BASE_ADDR}, +#ifdef CONFIG_MX6SXSCM_EMMC + {USDHC4_BASE_ADDR, 0, 8}, +#else + {USDHC4_BASE_ADDR}, +#endif +}; + +#define USDHC3_CD_GPIO IMX_GPIO_NR(2, 10) +#define USDHC3_PWR_GPIO IMX_GPIO_NR(2, 11) +#define USDHC4_CD_GPIO IMX_GPIO_NR(6, 21) + +int board_mmc_get_env_dev(int devno) +{ + return devno - 1; +} + +int mmc_map_to_kernel_blk(int dev_no) +{ + return dev_no + 1; +} + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC2_BASE_ADDR: + ret = 1; /* Assume uSDHC2 is always present */ + break; + case USDHC3_BASE_ADDR: + ret = 1; /* Assume uSDHC3 is always present */ + break; + case USDHC4_BASE_ADDR: +#ifdef CONFIG_MX6SXSCM_EMMC + ret = 1; +#else + ret = !gpio_get_value(USDHC4_CD_GPIO); +#endif + break; + } + + return ret; +} + +int board_mmc_init(bd_t *bis) +{ + int i, ret; + + /* + * According to the board_mmc_init() the following map is done: + * (U-Boot device node) (Physical Port) + * mmc0 USDHC2 + * mmc1 USDHC3 + * mmc2 USDHC4 + */ + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { + switch (i) { + case 0: + imx_iomux_v3_setup_multiple_pads( + usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + break; + case 1: + imx_iomux_v3_setup_multiple_pads( + usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + gpio_direction_input(USDHC3_CD_GPIO); + gpio_direction_output(USDHC3_PWR_GPIO, 1); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + break; + case 2: +#ifdef CONFIG_MX6SXSCM_EMMC + imx_iomux_v3_setup_multiple_pads( + usdhc4_emmc_pads, ARRAY_SIZE(usdhc4_emmc_pads)); +#else + imx_iomux_v3_setup_multiple_pads( + usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); + gpio_direction_input(USDHC4_CD_GPIO); +#endif + usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); + break; + default: + printf("Warning: you configured more "); + printf("USDHC controllers "); + printf("(%d) than supported by the board\n", i + 1); + return -EINVAL; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); + if (ret) { + printf("Warning: failed to initialize mmc dev %d\n", i); + return ret; + } + } + + return 0; +} + +#ifdef CONFIG_FSL_QSPI + +#define QSPI_PAD_CTRL1 \ + (PAD_CTL_SRE_FAST | PAD_CTL_SPEED_HIGH | \ + PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_40ohm) + +static iomux_v3_cfg_t const quadspi_pads[] = { + MX6_PAD_NAND_WP_B__QSPI2_A_DATA_0 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), + MX6_PAD_NAND_READY_B__QSPI2_A_DATA_1 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), + MX6_PAD_NAND_CE0_B__QSPI2_A_DATA_2 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), + MX6_PAD_NAND_CE1_B__QSPI2_A_DATA_3 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), + MX6_PAD_NAND_ALE__QSPI2_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL1), + MX6_PAD_NAND_CLE__QSPI2_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL1), + MX6_PAD_NAND_DATA01__QSPI2_B_DATA_0 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), + MX6_PAD_NAND_DATA00__QSPI2_B_DATA_1 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), + MX6_PAD_NAND_WE_B__QSPI2_B_DATA_2 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), + MX6_PAD_NAND_RE_B__QSPI2_B_DATA_3 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), + MX6_PAD_NAND_DATA03__QSPI2_B_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL1), + MX6_PAD_NAND_DATA02__QSPI2_B_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL1), + MX6_PAD_NAND_DATA05__QSPI2_B_DQS | MUX_PAD_CTRL(QSPI_PAD_CTRL1), +}; + +int board_qspi_init(void) +{ + /* Set the iomux */ + imx_iomux_v3_setup_multiple_pads(quadspi_pads, + ARRAY_SIZE(quadspi_pads)); + + /* Set the clock */ + enable_qspi_clk(1); + + return 0; +} +#endif + +#ifdef CONFIG_CMD_BMODE +static const struct boot_mode board_boot_modes[] = { + /* 4 bit bus width */ + {"sd3", MAKE_CFGVAL(0x42, 0x30, 0x00, 0x00)}, + {"sd4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, + {"qspi2", MAKE_CFGVAL(0x18, 0x00, 0x00, 0x00)}, + {NULL, 0}, +}; +#endif + +#ifdef CONFIG_VIDEO_MXS +static iomux_v3_cfg_t const lvds_ctrl_pads[] = { + /* CABC enable */ + MX6_PAD_QSPI1A_DATA2__GPIO4_IO_18 | MUX_PAD_CTRL(NO_PAD_CTRL), + + /* Use GPIO for Brightness adjustment, duty cycle = period */ + MX6_PAD_NAND_DATA07__GPIO4_IO_11 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const lcd_pads[] = { + MX6_PAD_LCD1_CLK__LCDIF1_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_ENABLE__LCDIF1_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_HSYNC__LCDIF1_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_VSYNC__LCDIF1_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA00__LCDIF1_DATA_0 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA01__LCDIF1_DATA_1 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA02__LCDIF1_DATA_2 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA03__LCDIF1_DATA_3 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA04__LCDIF1_DATA_4 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA05__LCDIF1_DATA_5 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA06__LCDIF1_DATA_6 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA07__LCDIF1_DATA_7 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA08__LCDIF1_DATA_8 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA09__LCDIF1_DATA_9 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA10__LCDIF1_DATA_10 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA11__LCDIF1_DATA_11 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA12__LCDIF1_DATA_12 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA13__LCDIF1_DATA_13 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA14__LCDIF1_DATA_14 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA15__LCDIF1_DATA_15 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA16__LCDIF1_DATA_16 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA17__LCDIF1_DATA_17 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA18__LCDIF1_DATA_18 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA19__LCDIF1_DATA_19 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA20__LCDIF1_DATA_20 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA21__LCDIF1_DATA_21 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA22__LCDIF1_DATA_22 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_DATA23__LCDIF1_DATA_23 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX6_PAD_LCD1_RESET__GPIO3_IO_27 | MUX_PAD_CTRL(NO_PAD_CTRL), + + /* Use GPIO for Brightness adjustment, duty cycle = period */ + MX6_PAD_NAND_DATA06__GPIO4_IO_10 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +void do_enable_lvds(struct display_info_t const *dev) +{ + int ret; + + ret = enable_lcdif_clock(dev->bus); + if (ret) { + printf("Enable LCDIF clock failed, %d\n", ret); + return; + } + ret = enable_lvds_bridge(dev->bus); + if (ret) { + printf("Enable LVDS bridge failed, %d\n", ret); + return; + } + + imx_iomux_v3_setup_multiple_pads(lvds_ctrl_pads, + ARRAY_SIZE(lvds_ctrl_pads)); + + /* Enable CABC */ + gpio_direction_output(IMX_GPIO_NR(4, 18) , 1); + + /* Set Brightness to high */ + gpio_direction_output(IMX_GPIO_NR(4, 11) , 1); +} + +void do_enable_parallel_lcd(struct display_info_t const *dev) + +{ + int ret; + + ret = enable_lcdif_clock(dev->bus); + if (ret) { + printf("Enable LCDIF clock failed, %d\n", ret); + return; + } + + imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads)); + + /* Reset the LCD */ + gpio_direction_output(IMX_GPIO_NR(3, 27) , 0); + udelay(500); + gpio_direction_output(IMX_GPIO_NR(3, 27) , 1); + + /* Set Brightness to high */ + gpio_direction_output(IMX_GPIO_NR(4, 10) , 1); +} + +struct display_info_t const displays[] = {{ + .bus = LCDIF2_BASE_ADDR, + .addr = 0, + .pixfmt = 18, + .detect = NULL, + .enable = do_enable_lvds, + .mode = { + .name = "Hannstar-XGA", + .xres = 1024, + .yres = 768, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = MX6SX_LCDIF1_BASE_ADDR, + .addr = 0, + .pixfmt = 24, + .detect = NULL, + .enable = do_enable_parallel_lcd, + .mode = { + .name = "MCIMX28LCD", + .xres = 800, + .yres = 480, + .pixclock = 29850, + .left_margin = 89, + .right_margin = 164, + .upper_margin = 23, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +} } }; +size_t display_count = ARRAY_SIZE(displays); +#endif +int board_init(void) +{ + /* Address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + /* + * Because kernel set WDOG_B mux before pad with the commone pinctrl + * framwork now and wdog reset will be triggered once set WDOG_B mux + * with default pad setting, we set pad setting here to workaround this. + * Since imx_iomux_v3_setup_pad also set mux before pad setting, we set + * as GPIO mux firstly here to workaround it. + */ + imx_iomux_v3_setup_pad(wdog_b_pad); + + /* Enable PERI_3V3, which is used by SD2, ENET, LVDS, BT */ + imx_iomux_v3_setup_multiple_pads(peri_3v3_pads, + ARRAY_SIZE(peri_3v3_pads)); + + /* Active high for ncp692 */ + gpio_direction_output(IMX_GPIO_NR(4, 16) , 1); + +#ifdef CONFIG_SYS_I2C_MXC + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); + setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); + setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info4); +#endif + +#ifdef CONFIG_USB_EHCI_MX6 + setup_usb(); +#endif + +#ifdef CONFIG_FSL_QSPI + board_qspi_init(); +#endif + + return 0; +} + +int board_late_init(void) +{ +#ifdef CONFIG_CMD_BMODE + add_board_boot_modes(board_boot_modes); +#endif + +#ifdef CONFIG_ENV_IS_IN_MMC + board_late_mmc_env_init(); +#endif + + return 0; +} + +int checkboard(void) +{ + puts("Board: MX6SXSCM EVB\n"); + + return 0; +} + +#ifdef CONFIG_FSL_FASTBOOT + +void board_fastboot_setup(void) +{ + switch (get_boot_device()) { +#if defined(CONFIG_FASTBOOT_STORAGE_MMC) + case SD2_BOOT: + case MMC2_BOOT: + if (!getenv("fastboot_dev")) + setenv("fastboot_dev", "mmc0"); + if (!getenv("bootcmd")) + setenv("bootcmd", "boota mmc0"); + break; + case SD3_BOOT: + case MMC3_BOOT: + if (!getenv("fastboot_dev")) + setenv("fastboot_dev", "mmc1"); + if (!getenv("bootcmd")) + setenv("bootcmd", "boota mmc1"); + break; + case SD4_BOOT: + case MMC4_BOOT: + if (!getenv("fastboot_dev")) + setenv("fastboot_dev", "mmc2"); + if (!getenv("bootcmd")) + setenv("bootcmd", "boota mmc2"); + break; +#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/ + default: + printf("unsupported boot devices\n"); + break; + } +} + +#ifdef CONFIG_ANDROID_RECOVERY + +#define GPIO_VOL_DN_KEY IMX_GPIO_NR(1, 19) +iomux_v3_cfg_t const recovery_key_pads[] = { + (MX6_PAD_CSI_DATA05__GPIO1_IO_19 | MUX_PAD_CTRL(BUTTON_PAD_CTRL)), +}; + +int check_recovery_cmd_file(void) +{ + int button_pressed = 0; + int recovery_mode = 0; + + recovery_mode = recovery_check_and_clean_flag(); + + /* Check Recovery Combo Button press or not. */ + imx_iomux_v3_setup_multiple_pads(recovery_key_pads, + ARRAY_SIZE(recovery_key_pads)); + + gpio_direction_input(GPIO_VOL_DN_KEY); + + /* VOL_DN key is low assert */ + if (gpio_get_value(GPIO_VOL_DN_KEY) == 0) { + button_pressed = 1; + printf("Recovery key pressed\n"); + } + + return recovery_mode || button_pressed; +} + +void board_recovery_setup(void) +{ + int bootdev = get_boot_device(); + + switch (bootdev) { +#if defined(CONFIG_FASTBOOT_STORAGE_MMC) + case SD2_BOOT: + case MMC2_BOOT: + if (!getenv("bootcmd_android_recovery")) + setenv("bootcmd_android_recovery", + "boota mmc0 recovery"); + break; + case SD3_BOOT: + case MMC3_BOOT: + if (!getenv("bootcmd_android_recovery")) + setenv("bootcmd_android_recovery", + "boota mmc1 recovery"); + break; + case SD4_BOOT: + case MMC4_BOOT: + if (!getenv("bootcmd_android_recovery")) + setenv("bootcmd_android_recovery", + "boota mmc2 recovery"); + break; +#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/ + default: + printf("Unsupported bootup device for recovery: dev: %d\n", + bootdev); + return; + } + + printf("setup env for recovery..\n"); + setenv("bootcmd", "run bootcmd_android_recovery"); +} +#endif /*CONFIG_ANDROID_RECOVERY*/ + +#endif /*CONFIG_FSL_FASTBOOT*/ |