diff options
Diffstat (limited to 'board/freescale/mx6sxsabresd/mx6sxsabresd.c')
| -rw-r--r-- | board/freescale/mx6sxsabresd/mx6sxsabresd.c | 121 |
1 files changed, 121 insertions, 0 deletions
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 5aca602..9825c82 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -11,6 +11,7 @@ #include <asm/arch/sys_proto.h> #include <asm/gpio.h> #include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/boot_mode.h> #include <asm/io.h> #include <linux/sizes.h> #include <common.h> @@ -27,6 +28,14 @@ #include <asm/arch/imx-rdc.h> #endif +#ifdef CONFIG_FASTBOOT +#include <fastboot.h> +#ifdef CONFIG_ANDROID_RECOVERY +#include <recovery.h> +#endif +#endif /*CONFIG_FASTBOOT*/ + + DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ @@ -52,6 +61,9 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ PAD_CTL_ODE) +#define BUTTON_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_22K_UP | PAD_CTL_DSE_40ohm) + #ifdef CONFIG_SYS_I2C_MXC #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) @@ -647,3 +659,112 @@ int board_ehci_hcd_init(int port) return 0; } #endif + +#ifdef CONFIG_FASTBOOT + +void board_fastboot_setup(void) +{ + switch (get_boot_device()) { +#if defined(CONFIG_FASTBOOT_STORAGE_MMC) + case SD2_BOOT: + case MMC2_BOOT: + if (!getenv("fastboot_dev")) + setenv("fastboot_dev", "mmc0"); + if (!getenv("bootcmd")) + setenv("bootcmd", "booti mmc0"); + break; + case SD3_BOOT: + case MMC3_BOOT: + if (!getenv("fastboot_dev")) + setenv("fastboot_dev", "mmc1"); + if (!getenv("bootcmd")) + setenv("bootcmd", "booti mmc1"); + break; + case SD4_BOOT: + case MMC4_BOOT: + if (!getenv("fastboot_dev")) + setenv("fastboot_dev", "mmc2"); + if (!getenv("bootcmd")) + setenv("bootcmd", "booti mmc2"); + break; +#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/ + default: + printf("unsupported boot devices\n"); + break; + } +} + +#ifdef CONFIG_ANDROID_RECOVERY + +#define GPIO_VOL_DN_KEY IMX_GPIO_NR(1, 18) +iomux_v3_cfg_t const recovery_key_pads[] = { + (MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 | MUX_PAD_CTRL(BUTTON_PAD_CTRL)), +}; + +int check_recovery_cmd_file(void) +{ + int button_pressed = 0; + int recovery_mode = 0; + + recovery_mode = recovery_check_and_clean_flag(); + + /* Check Recovery Combo Button press or not. */ + imx_iomux_v3_setup_multiple_pads(recovery_key_pads, + ARRAY_SIZE(recovery_key_pads)); + + gpio_direction_input(GPIO_VOL_DN_KEY); + + if (gpio_get_value(GPIO_VOL_DN_KEY) == 0) { /* VOL_DN key is low assert */ + button_pressed = 1; + printf("Recovery key pressed\n"); + } + + return recovery_mode || button_pressed; +} + +void board_recovery_setup(void) +{ + int bootdev = get_boot_device(); + + switch (bootdev) { +#if defined(CONFIG_FASTBOOT_STORAGE_MMC) + case SD2_BOOT: + case MMC2_BOOT: + if (!getenv("bootcmd_android_recovery")) + setenv("bootcmd_android_recovery", "booti mmc0 recovery"); + break; + case SD3_BOOT: + case MMC3_BOOT: + if (!getenv("bootcmd_android_recovery")) + setenv("bootcmd_android_recovery", "booti mmc1 recovery"); + break; + case SD4_BOOT: + case MMC4_BOOT: + if (!getenv("bootcmd_android_recovery")) + setenv("bootcmd_android_recovery", "booti mmc2 recovery"); + break; +#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/ + default: + printf("Unsupported bootup device for recovery: dev: %d\n", + bootdev); + return; + } + + printf("setup env for recovery..\n"); + setenv("bootcmd", "run bootcmd_android_recovery"); +} +#endif /*CONFIG_ANDROID_RECOVERY*/ + +#endif /*CONFIG_FASTBOOT*/ + +#ifdef CONFIG_IMX_UDC +iomux_v3_cfg_t const otg_udc_pads[] = { + (MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL)), +}; +void udc_pins_setting(void) +{ + imx_iomux_v3_setup_multiple_pads(otg_udc_pads, + ARRAY_SIZE(otg_udc_pads)); +} + +#endif /*CONFIG_IMX_UDC*/ |