diff options
Diffstat (limited to 'board/freescale/mpc8641hpcn/ddr.c')
-rw-r--r-- | board/freescale/mpc8641hpcn/ddr.c | 165 |
1 files changed, 69 insertions, 96 deletions
diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c index 4f2e853..5d35757 100644 --- a/board/freescale/mpc8641hpcn/ddr.c +++ b/board/freescale/mpc8641hpcn/ddr.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008,2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -11,127 +11,100 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -typedef struct { - u32 datarate_mhz_low; - u32 datarate_mhz_high; +struct board_specific_parameters { u32 n_ranks; + u32 datarate_mhz_high; u32 clk_adjust; u32 cpo; u32 write_data_delay; -} board_specific_parameters_t; - -/* XXX: these values need to be checked for all interleaving modes. */ -const board_specific_parameters_t board_specific_parameters[2][16] = { - { - /* memory controller 0 */ - /* lo| hi| num| clk| cpo|wrdata */ - /* mhz| mhz|ranks|adjst| | delay */ - { 0, 333, 4, 7, 7, 3}, - {334, 400, 4, 7, 9, 3}, - {401, 549, 4, 7, 9, 3}, - {550, 650, 4, 7, 10, 4}, - - { 0, 333, 3, 7, 7, 3}, - {334, 400, 3, 7, 9, 3}, - {401, 549, 3, 7, 9, 3}, - {550, 650, 3, 7, 10, 4}, - - { 0, 333, 2, 7, 7, 3}, - {334, 400, 2, 7, 9, 3}, - {401, 549, 2, 7, 9, 3}, - {550, 650, 2, 7, 10, 4}, - - { 0, 333, 1, 7, 7, 3}, - {334, 400, 1, 7, 9, 3}, - {401, 549, 1, 7, 9, 3}, - {550, 650, 1, 7, 10, 4} - }, - - { - /* memory controller 1 */ - /* lo| hi| num| clk| cpo|wrdata */ - /* mhz| mhz|ranks|adjst| | delay */ - { 0, 333, 4, 7, 7, 3}, - {334, 400, 4, 7, 9, 3}, - {401, 549, 4, 7, 9, 3}, - {550, 650, 4, 7, 10, 4}, - - { 0, 333, 3, 7, 7, 3}, - {334, 400, 3, 7, 9, 3}, - {401, 549, 3, 7, 9, 3}, - {550, 650, 3, 7, 10, 4}, +}; - { 0, 333, 2, 7, 7, 3}, - {334, 400, 2, 7, 9, 3}, - {401, 549, 2, 7, 9, 3}, - {550, 650, 2, 7, 10, 4}, +/* + * This table contains all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ +const struct board_specific_parameters dimm0[] = { + /* + * memory controller 0 + * num| hi| clk| cpo|wrdata|2T + * ranks| mhz|adjst| | delay| + */ + {4, 333, 7, 7, 3}, + {4, 549, 7, 9, 3}, + {4, 650, 7, 10, 4}, + {2, 333, 7, 7, 3}, + {2, 549, 7, 9, 3}, + {2, 650, 7, 10, 4}, + {1, 333, 7, 7, 3}, + {1, 549, 7, 9, 3}, + {1, 650, 7, 10, 4}, + {} +}; - { 0, 333, 1, 7, 7, 3}, - {334, 400, 1, 7, 9, 3}, - {401, 549, 1, 7, 9, 3}, - {550, 650, 1, 7, 10, 4} - } +/* + * The two slots have slightly different timing. The center values are good + * for both slots. We use identical speed tables for them. In future use, if + * DIMMs have fewer center values that require two separated tables, copy the + * udimm0 table to udimm1 and make changes to clk_adjust and wrlvl_start. + */ +const struct board_specific_parameters *dimms[] = { + dimm0, + dimm0, }; void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) { - const board_specific_parameters_t *pbsp = - &(board_specific_parameters[ctrl_num][0]); - u32 num_params = sizeof(board_specific_parameters[ctrl_num]) / - sizeof(board_specific_parameters[0][0]); - u32 i; - u32 j; + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + unsigned int i; ulong ddr_freq; - /* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in - * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If - * there are two dimms in the controller, set odt_rd_cfg to 3 and - * odt_wr_cfg to 3 for the even CS, 0 for the odd CS. - */ - for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { - if (i&1) { /* odd CS */ - popts->cs_local_opts[i].odt_rd_cfg = 0; - popts->cs_local_opts[i].odt_wr_cfg = 0; - } else { /* even CS */ - if ((CONFIG_DIMM_SLOTS_PER_CTLR == 2) && - (pdimm[i/2].n_ranks != 0)) { - popts->cs_local_opts[i].odt_rd_cfg = 3; - popts->cs_local_opts[i].odt_wr_cfg = 3; - } else { - popts->cs_local_opts[i].odt_rd_cfg = 0; - popts->cs_local_opts[i].odt_wr_cfg = 4; - } - } + if (ctrl_num > 1) { + printf("Wrong parameter for controller number %d", ctrl_num); + return; } + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + if (pdimm[i].n_ranks) + break; + } + if (i >= CONFIG_DIMM_SLOTS_PER_CTLR) /* no DIMM */ + return; + + pbsp = dimms[ctrl_num]; /* Get clk_adjust, cpo, write_data_delay, according to the board ddr * freqency and n_banks specified in board_specific_parameters table. */ ddr_freq = get_ddr_freq(0) / 1000000; - for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { - if (pdimm[j].n_ranks > 0) { - for (i = 0; i < num_params; i++) { - if (ddr_freq >= pbsp->datarate_mhz_low && - ddr_freq <= pbsp->datarate_mhz_high && - pdimm[j].n_ranks == pbsp->n_ranks) { - popts->clk_adjust = pbsp->clk_adjust; - popts->cpo_override = pbsp->cpo; - popts->write_data_delay = - pbsp->write_data_delay; - break; - } - pbsp++; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm[i].n_ranks) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->clk_adjust = pbsp->clk_adjust; + popts->cpo_override = pbsp->cpo; + popts->write_data_delay = + pbsp->write_data_delay; + goto found; } + pbsp_highest = pbsp; } + pbsp++; } - if (i == num_params) { - printf("Warning: board specific timing not found " - "for data rate %lu MT/s!\n", ddr_freq); + if (pbsp_highest) { + printf("Error: board specific timing not found " + "for data rate %lu MT/s!\n" + "Trying to use the highest speed (%u) parameters\n", + ddr_freq, pbsp_highest->datarate_mhz_high); + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->cpo_override = pbsp_highest->cpo; + popts->write_data_delay = pbsp_highest->write_data_delay; + } else { + panic("DIMM is not supported by this board"); } +found: /* 2T timing enable */ popts->twoT_en = 1; } |