summaryrefslogtreecommitdiff
path: root/board/freescale/mpc8572ds
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/mpc8572ds')
-rw-r--r--board/freescale/mpc8572ds/ddr.c127
-rw-r--r--board/freescale/mpc8572ds/law.c15
-rw-r--r--board/freescale/mpc8572ds/mpc8572ds.c232
-rw-r--r--board/freescale/mpc8572ds/tlb.c28
4 files changed, 244 insertions, 158 deletions
diff --git a/board/freescale/mpc8572ds/ddr.c b/board/freescale/mpc8572ds/ddr.c
index 5f8c555..d66ede2 100644
--- a/board/freescale/mpc8572ds/ddr.c
+++ b/board/freescale/mpc8572ds/ddr.c
@@ -10,6 +10,7 @@
#include <i2c.h>
#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
{
@@ -38,40 +39,108 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
}
}
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+typedef struct {
+ u32 datarate_mhz_low;
+ u32 datarate_mhz_high;
+ u32 n_ranks;
+ u32 clk_adjust;
+ u32 cpo;
+ u32 write_data_delay;
+ u32 force_2T;
+} board_specific_parameters_t;
+
+/* ranges for parameters:
+ * wr_data_delay = 0-6
+ * clk adjust = 0-8
+ * cpo 2-0x1E (30)
+ */
+
+
+/* XXX: these values need to be checked for all interleaving modes. */
+/* XXX: No reliable dual-rank 800 MHz setting has been found. It may
+ * seem reliable, but errors will appear when memory intensive
+ * program is run. */
+/* XXX: Single rank at 800 MHz is OK. */
+const board_specific_parameters_t board_specific_parameters[][20] = {
+ {
+ /* memory controller 0 */
+ /* lo| hi| num| clk| cpo|wrdata|2T */
+ /* mhz| mhz|ranks|adjst| | delay| */
+ { 0, 333, 2, 6, 7, 3, 0},
+ {334, 400, 2, 6, 9, 3, 0},
+ {401, 549, 2, 6, 11, 3, 0},
+ {550, 680, 2, 1, 10, 5, 0},
+ {681, 850, 2, 1, 12, 5, 1},
+ { 0, 333, 1, 6, 7, 3, 0},
+ {334, 400, 1, 6, 9, 3, 0},
+ {401, 549, 1, 6, 11, 3, 0},
+ {550, 680, 1, 1, 10, 5, 0},
+ {681, 850, 1, 1, 12, 5, 0}
+ },
+
+ {
+ /* memory controller 1 */
+ /* lo| hi| num| clk| cpo|wrdata|2T */
+ /* mhz| mhz|ranks|adjst| | delay| */
+ { 0, 333, 2, 6, 7, 3, 0},
+ {334, 400, 2, 6, 9, 3, 0},
+ {401, 549, 2, 6, 11, 3, 0},
+ {550, 680, 2, 1, 11, 6, 0},
+ {681, 850, 2, 1, 13, 6, 1},
+ { 0, 333, 1, 6, 7, 3, 0},
+ {334, 400, 1, 6, 9, 3, 0},
+ {401, 549, 1, 6, 11, 3, 0},
+ {550, 680, 1, 1, 11, 6, 0},
+ {681, 850, 1, 1, 13, 6, 0}
+ }
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
{
- /*
- * Factors to consider for clock adjust:
- * - number of chips on bus
- * - position of slot
- * - DDR1 vs. DDR2?
- * - ???
- *
- * This needs to be determined on a board-by-board basis.
- * 0110 3/4 cycle late
- * 0111 7/8 cycle late
- */
- popts->clk_adjust = 7;
+ const board_specific_parameters_t *pbsp =
+ &(board_specific_parameters[ctrl_num][0]);
+ u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
+ sizeof(board_specific_parameters[0][0]);
+ u32 i;
+ ulong ddr_freq;
- /*
- * Factors to consider for CPO:
- * - frequency
- * - ddr1 vs. ddr2
+ /* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
+ * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
+ * there are two dimms in the controller, set odt_rd_cfg to 3 and
+ * odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
*/
- popts->cpo_override = 10;
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (i&1) { /* odd CS */
+ popts->cs_local_opts[i].odt_rd_cfg = 0;
+ popts->cs_local_opts[i].odt_wr_cfg = 0;
+ } else { /* even CS */
+ if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) {
+ popts->cs_local_opts[i].odt_rd_cfg = 0;
+ popts->cs_local_opts[i].odt_wr_cfg = 4;
+ } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
+ popts->cs_local_opts[i].odt_rd_cfg = 3;
+ popts->cs_local_opts[i].odt_wr_cfg = 3;
+ }
+ }
+ }
- /*
- * Factors to consider for write data delay:
- * - number of DIMMs
- *
- * 1 = 1/4 clock delay
- * 2 = 1/2 clock delay
- * 3 = 3/4 clock delay
- * 4 = 1 clock delay
- * 5 = 5/4 clock delay
- * 6 = 3/2 clock delay
+ /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+ * freqency and n_banks specified in board_specific_parameters table.
*/
- popts->write_data_delay = 5;
+ ddr_freq = get_ddr_freq(0) / 1000000;
+ for (i = 0; i < num_params; i++) {
+ if (ddr_freq >= pbsp->datarate_mhz_low &&
+ ddr_freq <= pbsp->datarate_mhz_high &&
+ pdimm->n_ranks == pbsp->n_ranks) {
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->cpo_override = pbsp->cpo;
+ popts->write_data_delay = pbsp->write_data_delay;
+ popts->twoT_en = pbsp->force_2T;
+ }
+ pbsp++;
+ }
/*
* Factors to consider for half-strength driver enable:
diff --git a/board/freescale/mpc8572ds/law.c b/board/freescale/mpc8572ds/law.c
index d69b593..83eb681 100644
--- a/board/freescale/mpc8572ds/law.c
+++ b/board/freescale/mpc8572ds/law.c
@@ -28,14 +28,15 @@
#include <asm/mmu.h>
struct law_entry law_table[] = {
- SET_LAW(CFG_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
- SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_1),
- SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
- SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
- SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
- SET_LAW(CFG_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3),
- SET_LAW(CFG_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
+ SET_LAW(CONFIG_SYS_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
+ SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
+ SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3),
+ SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
SET_LAW(PIXIS_BASE, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
+ SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
};
int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index 70b548b..a14db5a 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -25,6 +25,7 @@
#include <pci.h>
#include <asm/processor.h>
#include <asm/mmu.h>
+#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/immap_fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
@@ -32,12 +33,10 @@
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <tsec.h>
#include "../common/pixis.h"
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
+#include "../common/sgmii_riser.h"
long int fixed_sdram(void);
@@ -58,20 +57,12 @@ phys_size_t initdram(int board_type)
#ifdef CONFIG_SPD_EEPROM
dram_size = fsl_ddr_sdram();
-
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
- dram_size *= 0x100000;
#else
dram_size = fixed_sdram();
#endif
+ dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+ dram_size *= 0x100000;
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /*
- * Initialize and enable DDR ECC.
- */
- ddr_enable_ecc(dram_size);
-#endif
puts(" DDR: ");
return dram_size;
}
@@ -83,34 +74,34 @@ phys_size_t initdram(int board_type)
phys_size_t fixed_sdram (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile ccsr_ddr_t *ddr= &immap->im_ddr;
uint d_init;
- ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
- ddr->cs0_config = CFG_DDR_CS0_CONFIG;
+ ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+ ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
- ddr->timing_cfg_3 = CFG_DDR_TIMING_3;
- ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
- ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
- ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
- ddr->sdram_mode = CFG_DDR_MODE_1;
- ddr->sdram_mode_2 = CFG_DDR_MODE_2;
- ddr->sdram_interval = CFG_DDR_INTERVAL;
- ddr->sdram_data_init = CFG_DDR_DATA_INIT;
- ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
- ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
+ ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+ ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+ ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+ ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+ ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
+ ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
+ ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+ ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
+ ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
+ ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
#if defined (CONFIG_DDR_ECC)
- ddr->err_int_en = CFG_DDR_ERR_INT_EN;
- ddr->err_disable = CFG_DDR_ERR_DIS;
- ddr->err_sbe = CFG_DDR_SBE;
+ ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
+ ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
+ ddr->err_sbe = CONFIG_SYS_DDR_SBE;
#endif
asm("sync;isync");
udelay(500);
- ddr->sdram_cfg = CFG_DDR_CONTROL;
+ ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
d_init = 1;
@@ -144,11 +135,14 @@ static struct pci_controller pcie2_hose;
static struct pci_controller pcie3_hose;
#endif
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
int first_free_busno=0;
#ifdef CONFIG_PCI
void pci_init_board(void)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
uint devdisr = gur->devdisr;
uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
@@ -168,12 +162,12 @@ void pci_init_board(void)
#ifdef CONFIG_PCIE3
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR;
- extern void fsl_pci_init(struct pci_controller *hose);
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
struct pci_controller *hose = &pcie3_hose;
int pcie_ep = (host_agent == 0) || (host_agent == 3) ||
(host_agent == 5) || (host_agent == 6);
int pcie_configured = io_sel >= 1;
+ struct pci_region *r = hose->regions;
u32 temp32;
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
@@ -187,27 +181,23 @@ void pci_init_board(void)
printf ("\n");
/* inbound */
- pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ r += fsl_pci_setup_inbound_windows(r);
/* outbound memory */
- pci_set_region(hose->regions + 1,
- CFG_PCIE3_MEM_BASE,
- CFG_PCIE3_MEM_PHYS,
- CFG_PCIE3_MEM_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCIE3_MEM_BASE,
+ CONFIG_SYS_PCIE3_MEM_PHYS,
+ CONFIG_SYS_PCIE3_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
- pci_set_region(hose->regions + 2,
- CFG_PCIE3_IO_BASE,
- CFG_PCIE3_IO_PHYS,
- CFG_PCIE3_IO_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCIE3_IO_BASE,
+ CONFIG_SYS_PCIE3_IO_PHYS,
+ CONFIG_SYS_PCIE3_IO_SIZE,
PCI_REGION_IO);
- hose->region_count = 3;
+ hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -225,7 +215,7 @@ void pci_init_board(void)
pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0 ),
PCI_BASE_ADDRESS_1, &temp32);
- if (temp32 >= CFG_PCIE3_MEM_PHYS) {
+ if (temp32 >= CONFIG_SYS_PCIE3_MEM_PHYS) {
debug(" uli1572 read to %x\n", temp32);
in_be32((unsigned *)temp32);
}
@@ -240,12 +230,12 @@ void pci_init_board(void)
#ifdef CONFIG_PCIE2
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
- extern void fsl_pci_init(struct pci_controller *hose);
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
struct pci_controller *hose = &pcie2_hose;
int pcie_ep = (host_agent == 2) || (host_agent == 4) ||
- (host_agent == 6);
+ (host_agent == 6) || (host_agent == 0);
int pcie_configured = io_sel & 4;
+ struct pci_region *r = hose->regions;
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)",
@@ -258,27 +248,23 @@ void pci_init_board(void)
printf ("\n");
/* inbound */
- pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ r += fsl_pci_setup_inbound_windows(r);
/* outbound memory */
- pci_set_region(hose->regions + 1,
- CFG_PCIE2_MEM_BASE,
- CFG_PCIE2_MEM_PHYS,
- CFG_PCIE2_MEM_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCIE2_MEM_BASE,
+ CONFIG_SYS_PCIE2_MEM_PHYS,
+ CONFIG_SYS_PCIE2_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
- pci_set_region(hose->regions + 2,
- CFG_PCIE2_IO_BASE,
- CFG_PCIE2_IO_PHYS,
- CFG_PCIE2_IO_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCIE2_IO_BASE,
+ CONFIG_SYS_PCIE2_IO_PHYS,
+ CONFIG_SYS_PCIE2_IO_SIZE,
PCI_REGION_IO);
- hose->region_count = 3;
+ hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -297,12 +283,12 @@ void pci_init_board(void)
#endif
#ifdef CONFIG_PCIE1
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
- extern void fsl_pci_init(struct pci_controller *hose);
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
struct pci_controller *hose = &pcie1_hose;
- int pcie_ep = (host_agent == 1) || (host_agent == 4) ||
+ int pcie_ep = (host_agent <= 1) || (host_agent == 4) ||
(host_agent == 5);
int pcie_configured = io_sel & 6;
+ struct pci_region *r = hose->regions;
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE1 connected to Slot 2 as %s (base address %x)",
@@ -315,27 +301,23 @@ void pci_init_board(void)
printf ("\n");
/* inbound */
- pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ r += fsl_pci_setup_inbound_windows(r);
/* outbound memory */
- pci_set_region(hose->regions + 1,
- CFG_PCIE1_MEM_BASE,
- CFG_PCIE1_MEM_PHYS,
- CFG_PCIE1_MEM_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCIE1_MEM_BASE,
+ CONFIG_SYS_PCIE1_MEM_PHYS,
+ CONFIG_SYS_PCIE1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
- pci_set_region(hose->regions + 2,
- CFG_PCIE1_IO_BASE,
- CFG_PCIE1_IO_PHYS,
- CFG_PCIE1_IO_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCIE1_IO_BASE,
+ CONFIG_SYS_PCIE1_IO_PHYS,
+ CONFIG_SYS_PCIE1_IO_SIZE,
PCI_REGION_IO);
- hose->region_count = 3;
+ hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -359,8 +341,7 @@ void pci_init_board(void)
int board_early_init_r(void)
{
- unsigned int i;
- const unsigned int flashbase = CFG_FLASH_BASE;
+ const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
const u8 flash_esel = 2;
/*
@@ -368,11 +349,9 @@ int board_early_init_r(void)
* so that flash can be erased properly.
*/
- /* Invalidate any remaining lines of the flash from caches. */
- for (i = 0; i < 256*1024*1024; i+=32) {
- asm volatile ("dcbi %0,%1": : "b" (flashbase), "r" (i));
- asm volatile ("icbi %0,%1": : "b" (flashbase), "r" (i));
- }
+ /* Flush d-cache and invalidate i-cache of any FLASH data */
+ flush_dcache();
+ invalidate_icache();
/* invalidate existing TLB entry for flash + promjet */
disable_tlb(flash_esel);
@@ -521,11 +500,58 @@ unsigned long get_board_ddr_clk(ulong dummy)
}
#endif
+#ifdef CONFIG_TSEC_ENET
+int board_eth_init(bd_t *bis)
+{
+ struct tsec_info_struct tsec_info[4];
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ int num = 0;
+
+#ifdef CONFIG_TSEC1
+ SET_STD_TSEC_INFO(tsec_info[num], 1);
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
+ tsec_info[num].flags |= TSEC_SGMII;
+ num++;
+#endif
+#ifdef CONFIG_TSEC2
+ SET_STD_TSEC_INFO(tsec_info[num], 2);
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
+ tsec_info[num].flags |= TSEC_SGMII;
+ num++;
+#endif
+#ifdef CONFIG_TSEC3
+ SET_STD_TSEC_INFO(tsec_info[num], 3);
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
+ tsec_info[num].flags |= TSEC_SGMII;
+ num++;
+#endif
+#ifdef CONFIG_TSEC4
+ SET_STD_TSEC_INFO(tsec_info[num], 4);
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
+ tsec_info[num].flags |= TSEC_SGMII;
+ num++;
+#endif
+
+ if (!num) {
+ printf("No TSECs initialized\n");
+
+ return 0;
+ }
+
+ fsl_sgmii_riser_init(tsec_info, num);
+
+ tsec_eth_init(bis, tsec_info, num);
+
+ return 0;
+}
+#endif
+
#if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+ struct pci_controller *hose);
+
void ft_board_setup(void *blob, bd_t *bd)
{
- int node, tmp[2];
- const char *path;
ulong base, size;
ft_cpu_setup(blob, bd);
@@ -535,31 +561,15 @@ void ft_board_setup(void *blob, bd_t *bd)
fdt_fixup_memory(blob, (u64)base, (u64)size);
- node = fdt_path_offset(blob, "/aliases");
- tmp[0] = 0;
- if (node >= 0) {
#ifdef CONFIG_PCIE3
- path = fdt_getprop(blob, node, "pci0", NULL);
- if (path) {
- tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;
- do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
- }
+ ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
#endif
#ifdef CONFIG_PCIE2
- path = fdt_getprop(blob, node, "pci1", NULL);
- if (path) {
- tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
- do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
- }
+ ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
#endif
#ifdef CONFIG_PCIE1
- path = fdt_getprop(blob, node, "pci2", NULL);
- if (path) {
- tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
- do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
- }
+ ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
#endif
- }
}
#endif
diff --git a/board/freescale/mpc8572ds/tlb.c b/board/freescale/mpc8572ds/tlb.c
index 965356a..8d1f646 100644
--- a/board/freescale/mpc8572ds/tlb.c
+++ b/board/freescale/mpc8572ds/tlb.c
@@ -28,16 +28,16 @@
struct fsl_e_tlb_entry tlb_table[] = {
/* TLB 0 - for temp stack in cache */
- SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
@@ -52,34 +52,40 @@ struct fsl_e_tlb_entry tlb_table[] = {
0, 0, BOOKE_PAGESZ_4K, 1),
/* *I*G* - CCSRBAR */
- SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 1, BOOKE_PAGESZ_1M, 1),
/* W**G* - Flash/promjet, localbus */
/* This will be changed to *I*G* after relocation to RAM. */
- SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
+ MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
0, 2, BOOKE_PAGESZ_256M, 1),
/* *I*G* - PCI */
- SET_TLB_ENTRY(1, CFG_PCIE3_MEM_PHYS, CFG_PCIE3_MEM_PHYS,
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 3, BOOKE_PAGESZ_1G, 1),
/* *I*G* - PCI */
- SET_TLB_ENTRY(1, CFG_PCIE3_MEM_PHYS + 0x40000000, CFG_PCIE3_MEM_PHYS + 0x40000000,
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000, CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 4, BOOKE_PAGESZ_256M, 1),
- SET_TLB_ENTRY(1, CFG_PCIE3_MEM_PHYS + 0x50000000, CFG_PCIE3_MEM_PHYS + 0x50000000,
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000, CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 5, BOOKE_PAGESZ_256M, 1),
/* *I*G* - PCI I/O */
- SET_TLB_ENTRY(1, CFG_PCIE3_IO_PHYS, CFG_PCIE3_IO_PHYS,
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_PHYS, CONFIG_SYS_PCIE3_IO_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 6, BOOKE_PAGESZ_256K, 1),
+
+ /* *I*G - NAND */
+ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 7, BOOKE_PAGESZ_1M, 1),
+
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);
generated by cgit v1.1 at 2024-11-17 06:04:22 +0000