2 files changed, 1 insertions, 70 deletions
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index d354a26..deab811 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -39,8 +39,6 @@ extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
 
 void local_bus_init(void);
-void sdram_init(void);
-long int fixed_sdram(void);
 
 int checkboard (void)
 {
@@ -61,54 +59,6 @@ int checkboard (void)
 	return 0;
 }
 
-
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-	    volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	    uint temp_ddrdll = 0;
-
-	    /*
-	     * Work around to stabilize DDR DLL
-	     */
-	    temp_ddrdll = gur->ddrdllcr;
-	    gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-	    asm("sync;isync;msync");
-	}
-#endif
-
-#ifdef CONFIG_SPD_EEPROM
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
-	dram_size *= 0x100000;
-#else
-	dram_size = fixed_sdram();
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
-	/*
-	 * Initialize SDRAM.
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
-
 /*
  * Initialize Local Bus
  */
@@ -232,7 +182,7 @@ sdram_init(void)
 /*************************************************************************
  *  fixed sdram init -- doesn't use serial presence detect.
  ************************************************************************/
-long int fixed_sdram (void)
+phys_size_t fixed_sdram(void)
 {
   #ifndef CONFIG_SYS_RAMBOOT
 	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
diff --git a/board/freescale/mpc8540ads/tlb.c b/board/freescale/mpc8540ads/tlb.c
index a9925d5..adcc0ad 100644
--- a/board/freescale/mpc8540ads/tlb.c
+++ b/board/freescale/mpc8540ads/tlb.c
@@ -106,25 +106,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_16K, 1),
-
-#if !defined(CONFIG_SPD_EEPROM)
-	/*
-	 * TLB 8, 9:	128M	DDR
-	 * 0x00000000	64M	DDR System memory
-	 * 0x04000000	64M	DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 * Make sure the TLB count at the top of this table is correct.
-	 * Likely it needs to be increased by two for these entries.
-	 */
-#error("Update the number of table entries in tlb1_entry")
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 8, BOOKE_PAGESZ_64M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 9, BOOKE_PAGESZ_64M, 1),
-#endif
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);