summaryrefslogtreecommitdiff
path: root/board/freescale/mpc8349emds
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/mpc8349emds')
-rw-r--r--board/freescale/mpc8349emds/ddr.c80
1 files changed, 45 insertions, 35 deletions
diff --git a/board/freescale/mpc8349emds/ddr.c b/board/freescale/mpc8349emds/ddr.c
index 0209c1e..1d9d995 100644
--- a/board/freescale/mpc8349emds/ddr.c
+++ b/board/freescale/mpc8349emds/ddr.c
@@ -26,40 +26,42 @@
#include <asm/fsl_ddr_dimm_params.h>
struct board_specific_parameters {
- u32 datarate_mhz_low;
- u32 datarate_mhz_high;
u32 n_ranks;
+ u32 datarate_mhz_high;
u32 clk_adjust;
u32 cpo;
u32 write_data_delay;
u32 force_2T;
};
-const struct board_specific_parameters board_specific_parameters_udimm[][20] = {
- {
+/*
+ * This table contains all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+static const struct board_specific_parameters udimm0[] = {
/*
- * memory controller 0
- * lo| hi| num| clk| cpo|wrdata|2T
- * mhz| mhz|ranks|adjst| | delay|
+ * memory controller 0
+ * num| hi| clk| cpo|wrdata|2T
+ * ranks| mhz|adjst| | delay|
*/
- { 0, 300, 2, 4, 4, 2, 0},
- {301, 365, 2, 4, 6, 2, 0},
- {366, 450, 2, 4, 7, 2, 0},
- {451, 850, 2, 4, 31, 2, 0},
- { 0, 300, 1, 4, 4, 2, 0},
- {301, 365, 1, 4, 6, 2, 0},
- {366, 450, 1, 4, 7, 2, 0},
- {451, 850, 1, 4, 31, 2, 0}
- }
+ {2, 300, 4, 4, 2, 0},
+ {2, 365, 4, 6, 2, 0},
+ {2, 450, 4, 7, 2, 0},
+ {2, 850, 4, 31, 2, 0},
+ {1, 300, 4, 4, 2, 0},
+ {1, 365, 4, 6, 2, 0},
+ {1, 450, 4, 7, 2, 0},
+ {1, 850, 4, 31, 2, 0},
+ {}
};
void fsl_ddr_board_options(memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num)
{
- const struct board_specific_parameters *pbsp;
- u32 num_params;
- u32 i, dimm_num;
+ const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+ unsigned int i;
ulong ddr_freq;
if (ctrl_num != 0) /* we have only one controller */
@@ -71,33 +73,41 @@ void fsl_ddr_board_options(memctl_options_t *popts,
if (i >= CONFIG_DIMM_SLOTS_PER_CTLR) /* no DIMM */
return;
- dimm_num = i;
- pbsp = &(board_specific_parameters_udimm[ctrl_num][0]);
- num_params = sizeof(board_specific_parameters_udimm[ctrl_num]) /
- sizeof(board_specific_parameters_udimm[0][0]);
+ pbsp = udimm0;
/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
* freqency and n_banks specified in board_specific_parameters table.
*/
ddr_freq = get_ddr_freq(0) / 1000000;
- for (i = 0; i < num_params; i++) {
- if (ddr_freq >= pbsp->datarate_mhz_low &&
- ddr_freq <= pbsp->datarate_mhz_high &&
- pdimm[dimm_num].n_ranks == pbsp->n_ranks) {
- popts->clk_adjust = pbsp->clk_adjust;
- popts->cpo_override = pbsp->cpo;
- popts->write_data_delay = pbsp->write_data_delay;
- popts->twoT_en = pbsp->force_2T;
- break;
+ while (pbsp->datarate_mhz_high) {
+ if (pbsp->n_ranks == pdimm[i].n_ranks) {
+ if (ddr_freq <= pbsp->datarate_mhz_high) {
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->cpo_override = pbsp->cpo;
+ popts->write_data_delay =
+ pbsp->write_data_delay;
+ popts->twoT_en = pbsp->force_2T;
+ goto found;
+ }
+ pbsp_highest = pbsp;
}
pbsp++;
}
- if (i == num_params) {
- printf("Warning: board specific timing not found "
- "for data rate %lu MT/s!\n", ddr_freq);
+ if (pbsp_highest) {
+ printf("Error: board specific timing not found "
+ "for data rate %lu MT/s!\n"
+ "Trying to use the highest speed (%u) parameters\n",
+ ddr_freq, pbsp_highest->datarate_mhz_high);
+ popts->clk_adjust = pbsp_highest->clk_adjust;
+ popts->cpo_override = pbsp_highest->cpo;
+ popts->write_data_delay = pbsp_highest->write_data_delay;
+ popts->twoT_en = pbsp_highest->force_2T;
+ } else {
+ panic("DIMM is not supported by this board");
}
+found:
/*
* Factors to consider for half-strength driver enable:
* - number of DIMMs installed