diff options
Diffstat (limited to 'board/freescale/ls2085aqds/README')
| -rw-r--r-- | board/freescale/ls2085aqds/README | 129 |
1 files changed, 129 insertions, 0 deletions
diff --git a/board/freescale/ls2085aqds/README b/board/freescale/ls2085aqds/README new file mode 100644 index 0000000..fb3938e --- /dev/null +++ b/board/freescale/ls2085aqds/README @@ -0,0 +1,129 @@ +Overview +-------- +The LS2085A Development System (QDS) is a high-performance computing, +evaluation, and development platform that supports the QorIQ LS2085A +Layerscape Architecture processor. The LS2085AQDS provides validation and +SW development platform for the Freescale LS2085A processor series, with +a complete debugging environment. + +LS2085A SoC Overview +------------------ +The LS2085A integrated multicore processor combines eight ARM Cortex-A57 +processor cores with high-performance data path acceleration logic and network +and peripheral bus interfaces required for networking, telecom/datacom, +wireless infrastructure, and mil/aerospace applications. + +The LS2085A SoC includes the following function and features: + + - Eight 64-bit ARM Cortex-A57 CPUs + - 1 MB platform cache with ECC + - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support + - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by + the AIOP + - Data path acceleration architecture (DPAA2) incorporating acceleration for + the following functions: + - Packet parsing, classification, and distribution (WRIOP) + - Queue and Hardware buffer management for scheduling, packet sequencing, and + congestion management, buffer allocation and de-allocation (QBMan) + - Cryptography acceleration (SEC) at up to 10 Gbps + - RegEx pattern matching acceleration (PME) at up to 10 Gbps + - Decompression/compression acceleration (DCE) at up to 20 Gbps + - Accelerated I/O processing (AIOP) at up to 20 Gbps + - QDMA engine + - 16 SerDes lanes at up to 10.3125 GHz + - Ethernet interfaces + - Up to eight 10 Gbps Ethernet MACs + - Up to eight 1 / 2.5 Gbps Ethernet MACs + - High-speed peripheral interfaces + - Four PCIe 3.0 controllers, one supporting SR-IOV + - Additional peripheral interfaces + - Two serial ATA (SATA 3.0) controllers + - Two high-speed USB 3.0 controllers with integrated PHY + - Enhanced secure digital host controller (eSDXC/eMMC) + - Serial peripheral interface (SPI) controller + - Quad Serial Peripheral Interface (QSPI) Controller + - Four I2C controllers + - Two DUARTs + - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash + - Support for hardware virtualization and partitioning enforcement + - QorIQ platform's trust architecture 3.0 + - Service processor (SP) provides pre-boot initialization and secure-boot + capabilities + + LS2085AQDS board Overview + ----------------------- + - SERDES Connections, 16 lanes supporting: + - PCI Express - 3.0 + - SGMII, SGMII 2.5 + - QSGMII + - SATA 3.0 + - XAUI + - XFI + - DDR Controller + - Two ports of 72-bits (8-bits ECC) DDR4. Each port supports four + chip-selects and two DIMM connectors. Support is up to 2133MT/s. + - One port of 40-bits (8-bits ECC) DDR4 which supports four chip-selects + and two DIMM connectors. Support is up to 1600MT/s. + -IFC/Local Bus + - IFC rev. 2.0 implementation supporting Little Endian connection scheme. + - One in-socket 128 MB NOR flash 16-bit data bus + - One 512 MB NAND flash with ECC support + - IFC Test Port + - PromJet Port + - FPGA connection + - USB 3.0 + - Two high speed USB 3.0 ports + - First USB 3.0 port configured as Host with Type-A connector + - Second USB 3.0 port configured as OTG with micro-AB connector + - SDHC: PCIe x1 Right Angle connector for supporting following cards + - 1/4-/8-bit SD/MMC Legacy CARD supporting 3.3V devices only + - 1-/4-/8-bit SD/MMC Card supporting 1.8V devices only + - 4-bit eMMC Card Rev 4.4 (1.8V only) + - 8-bit eMMC Card Rev 4.5 (1.8V only) + - SD Card Rev 2.0 and Rev 3.0 + - DSPI: 3 high-speed flash Memory for storage + - 16 MB high-speed flash Memory for boot code and storage (up to 108MHz) + - 8 MB high-speed flash Memory (up to 104 MHz) + - 512 MB low-speed flash Memory (up to 40 MHz) + - QSPI: via NAND/QSPI Card + - 4 I2C controllers + - Two SATA onboard connectors + - UART + - Two 4-pin (HW control) or four 2-pin (SW control) serial ports at up to 115.2 Kbit/s + - Two DB9 D-Type connectors supporting one Serial port each + - ARM JTAG support + +Memory map from core's view +---------------------------- +0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom +0x00_0100_0000 .. 0x00_0FFF_FFFF CCSR +0x00_1800_0000 .. 0x00_181F_FFFF OCRAM +0x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1 +0x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1 +0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2 +0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2 + +Other addresses are either reserved, or not used directly by u-boot. +This list should be updated when more addresses are used. + +IFC region map from core's view +------------------------------- +During boot i.e. IFC Region #1:- + 0x30000000 - 0x37ffffff : 128MB : NOR flash + 0x38000000 - 0x3BFFFFFF : 64MB : Promjet + 0x3C000000 - 0x40000000 : 64MB : FPGA etc + +After relocate to DDR i.e. IFC Region #2:- + 0x5_1000_0000..0x5_1fff_ffff Memory Hole + 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB) + 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB + 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet) + 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet) + +Booting Options +--------------- +a) Promjet Boot +b) NOR boot +c) NAND boot +d) SD boot +e) QSPI boot |