diff options
Diffstat (limited to 'board/freescale/ls2080aqds/ddr.c')
-rw-r--r-- | board/freescale/ls2080aqds/ddr.c | 31 |
1 files changed, 27 insertions, 4 deletions
diff --git a/board/freescale/ls2080aqds/ddr.c b/board/freescale/ls2080aqds/ddr.c index ae681de..9fb5e11 100644 --- a/board/freescale/ls2080aqds/ddr.c +++ b/board/freescale/ls2080aqds/ddr.c @@ -134,10 +134,18 @@ found: popts->zq_en = 1; if (ddr_freq < 2350) { - popts->ddr_cdr1 = DDR_CDR1_DHC_EN | - DDR_CDR1_ODT(DDR_CDR_ODT_60ohm); - popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) | - DDR_CDR2_VREF_RANGE_2; + if (pdimm[0].n_ranks == 2 && pdimm[1].n_ranks == 2) { + /* four chip-selects */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | + DDR_CDR1_ODT(DDR_CDR_ODT_80ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm); + popts->twot_en = 1; /* enable 2T timing */ + } else { + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | + DDR_CDR1_ODT(DDR_CDR_ODT_60ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) | + DDR_CDR2_VREF_RANGE_2; + } } else { popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_100ohm); @@ -167,14 +175,29 @@ void dram_init_banksize(void) phys_size_t dp_ddr_size; #endif + /* + * gd->secure_ram tracks the location of secure memory. + * It was set as if the memory starts from 0. + * The address needs to add the offset of its bank. + */ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) { gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; gd->bd->bi_dram[1].size = gd->ram_size - CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[1].start + + gd->secure_ram - + CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif } else { gd->bd->bi_dram[0].size = gd->ram_size; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif } #ifdef CONFIG_SYS_DP_DDR_BASE_PHY |