diff options
Diffstat (limited to 'board/freescale/common')
| -rw-r--r-- | board/freescale/common/Makefile | 2 | ||||
| -rw-r--r-- | board/freescale/common/cadmus.c | 12 | ||||
| -rw-r--r-- | board/freescale/common/cds_eeprom.c | 60 | ||||
| -rw-r--r-- | board/freescale/common/fsl_diu_fb.c | 8 | ||||
| -rw-r--r-- | board/freescale/common/pixis.c | 85 | ||||
| -rw-r--r-- | board/freescale/common/sgmii_riser.c | 26 | ||||
| -rw-r--r-- | board/freescale/common/sgmii_riser.h | 15 | ||||
| -rw-r--r-- | board/freescale/common/sys_eeprom.c | 54 |
8 files changed, 159 insertions, 103 deletions
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 508e3b5..02a824d 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -30,12 +30,12 @@ endif LIB = $(obj)lib$(VENDOR).a COBJS-${CONFIG_FSL_CADMUS} += cadmus.o -COBJS-${CONFIG_FSL_CDS_EEPROM} += cds_eeprom.o COBJS-${CONFIG_FSL_VIA} += cds_via.o COBJS-${CONFIG_FSL_DIU_FB} += fsl_diu_fb.o fsl_logo_bmp.o COBJS-${CONFIG_FSL_PIXIS} += pixis.o COBJS-${CONFIG_PQ_MDS_PIB} += pq-mds-pib.o COBJS-${CONFIG_ID_EEPROM} += sys_eeprom.o +COBJS-${CONFIG_FSL_SGMII_RISER} += sgmii_riser.o COBJS-${CONFIG_MPC8541CDS} += cds_pci_ft.o COBJS-${CONFIG_MPC8548CDS} += cds_pci_ft.o diff --git a/board/freescale/common/cadmus.c b/board/freescale/common/cadmus.c index 5f86de5..db54bc4 100644 --- a/board/freescale/common/cadmus.c +++ b/board/freescale/common/cadmus.c @@ -27,8 +27,8 @@ /* * CADMUS Board System Registers */ -#ifndef CFG_CADMUS_BASE_REG -#define CFG_CADMUS_BASE_REG (CADMUS_BASE_ADDR + 0x4000) +#ifndef CONFIG_SYS_CADMUS_BASE_REG +#define CONFIG_SYS_CADMUS_BASE_REG (CADMUS_BASE_ADDR + 0x4000) #endif typedef struct cadmus_reg { @@ -47,7 +47,7 @@ typedef struct cadmus_reg { unsigned int get_board_version(void) { - volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG; + volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG; return cadmus->cm_ver; } @@ -56,7 +56,7 @@ get_board_version(void) unsigned long get_clock_freq(void) { - volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG; + volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG; uint pci1_speed = (cadmus->cm_pci >> 2) & 0x3; /* PSPEED in [4:5] */ @@ -74,7 +74,7 @@ get_clock_freq(void) unsigned int get_pci_slot(void) { - volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG; + volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG; /* * PCI slot in USER bits CSR[6:7] by convention. @@ -86,7 +86,7 @@ get_pci_slot(void) unsigned int get_pci_dual(void) { - volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG; + volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG; /* * PCI DUAL in CM_PCI[3] diff --git a/board/freescale/common/cds_eeprom.c b/board/freescale/common/cds_eeprom.c deleted file mode 100644 index 5034e0c..0000000 --- a/board/freescale/common/cds_eeprom.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <common.h> -#include <i2c.h> - -#include "eeprom.h" - - -typedef struct { - char idee_pcbid[4]; /* "CCID" for CDC v1.X */ - u8 idee_major; - u8 idee_minor; - char idee_serial[10]; - char idee_errata[2]; - char idee_date[8]; /* yyyymmdd */ - /* The rest of the EEPROM space is reserved */ -} id_eeprom_t; - - -unsigned int -get_cpu_board_revision(void) -{ - uint major = 0; - uint minor = 0; - - id_eeprom_t id_eeprom; - - i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, - (uchar *) &id_eeprom, sizeof(id_eeprom)); - - major = id_eeprom.idee_major; - minor = id_eeprom.idee_minor; - - if (major == 0xff && minor == 0xff) { - major = minor = 0; - } - - return MPC85XX_CPU_BOARD_REV(major,minor); -} diff --git a/board/freescale/common/fsl_diu_fb.c b/board/freescale/common/fsl_diu_fb.c index 75f782e..2fc878b 100644 --- a/board/freescale/common/fsl_diu_fb.c +++ b/board/freescale/common/fsl_diu_fb.c @@ -205,7 +205,7 @@ int fsl_diu_init(int xres, unsigned int i, j; debug("Enter fsl_diu_init\n"); - dr.diu_reg = (struct diu *) (CFG_DIU_ADDR); + dr.diu_reg = (struct diu *) (CONFIG_SYS_DIU_ADDR); hw = (struct diu *) dr.diu_reg; disable_lcdc(); @@ -242,10 +242,10 @@ int fsl_diu_init(int xres, printf("Unable to allocate fb memory 1\n"); return -1; } - } else { - memset(info->screen_base, 0, info->smem_len); } + memset(info->screen_base, 0, info->smem_len); + dr.diu_reg->desc[0] = (unsigned int) &dummy_ad; dr.diu_reg->desc[1] = (unsigned int) &dummy_ad; dr.diu_reg->desc[2] = (unsigned int) &dummy_ad; @@ -403,7 +403,7 @@ static int map_video_memory(struct fb_info *info, unsigned long bytes_align) mask = bytes_align - 1; offset = (unsigned long)info->screen_base & mask; if (offset) { - info->screen_base += offset; + info->screen_base += (bytes_align - offset); info->smem_len = info->smem_len - (bytes_align - offset); } else info->smem_len = info->smem_len - bytes_align; diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c index 64e2e08..96820ac 100644 --- a/board/freescale/common/pixis.c +++ b/board/freescale/common/pixis.c @@ -26,6 +26,7 @@ #include <command.h> #include <watchdog.h> #include <asm/cache.h> +#include <asm/io.h> #include "pixis.h" @@ -206,8 +207,8 @@ void read_from_px_regs_altbank(int set) out8(PIXIS_BASE + PIXIS_VCFGEN1, tmp); } -#ifndef CFG_PIXIS_VBOOT_MASK -#define CFG_PIXIS_VBOOT_MASK (0x40) +#ifndef CONFIG_SYS_PIXIS_VBOOT_MASK +#define CONFIG_SYS_PIXIS_VBOOT_MASK (0x40) #endif void clear_altbank(void) @@ -215,7 +216,7 @@ void clear_altbank(void) u8 tmp; tmp = in8(PIXIS_BASE + PIXIS_VBOOT); - tmp &= ~CFG_PIXIS_VBOOT_MASK; + tmp &= ~CONFIG_SYS_PIXIS_VBOOT_MASK; out8(PIXIS_BASE + PIXIS_VBOOT, tmp); } @@ -226,7 +227,7 @@ void set_altbank(void) u8 tmp; tmp = in8(PIXIS_BASE + PIXIS_VBOOT); - tmp |= CFG_PIXIS_VBOOT_MASK; + tmp |= CONFIG_SYS_PIXIS_VBOOT_MASK; out8(PIXIS_BASE + PIXIS_VBOOT, tmp); } @@ -282,6 +283,76 @@ U_BOOT_CMD( "diswd - Disable watchdog timer \n", NULL); +#ifdef CONFIG_PIXIS_SGMII_CMD +int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int which_tsec = -1; + uchar mask; + uchar switch_mask; + + if (argc > 2) + if (strcmp(argv[1], "all") != 0) + which_tsec = simple_strtoul(argv[1], NULL, 0); + + switch (which_tsec) { +#ifdef CONFIG_TSEC1 + case 1: + mask = PIXIS_VSPEED2_TSEC1SER; + switch_mask = PIXIS_VCFGEN1_TSEC1SER; + break; +#endif +#ifdef CONFIG_TSEC2 + case 2: + mask = PIXIS_VSPEED2_TSEC2SER; + switch_mask = PIXIS_VCFGEN1_TSEC2SER; + break; +#endif +#ifdef CONFIG_TSEC3 + case 3: + mask = PIXIS_VSPEED2_TSEC3SER; + switch_mask = PIXIS_VCFGEN1_TSEC3SER; + break; +#endif +#ifdef CONFIG_TSEC4 + case 4: + mask = PIXIS_VSPEED2_TSEC4SER; + switch_mask = PIXIS_VCFGEN1_TSEC4SER; + break; +#endif + default: + mask = PIXIS_VSPEED2_MASK; + switch_mask = PIXIS_VCFGEN1_MASK; + break; + } + + /* Toggle whether the switches or FPGA control the settings */ + if (!strcmp(argv[argc - 1], "switch")) + clrbits_8((unsigned char *)PIXIS_BASE + PIXIS_VCFGEN1, + switch_mask); + else + setbits_8((unsigned char *)PIXIS_BASE + PIXIS_VCFGEN1, + switch_mask); + + /* If it's not the switches, enable or disable SGMII, as specified */ + if (!strcmp(argv[argc - 1], "on")) + clrbits_8((unsigned char *)PIXIS_BASE + PIXIS_VSPEED2, mask); + else if (!strcmp(argv[argc - 1], "off")) + setbits_8((unsigned char *)PIXIS_BASE + PIXIS_VSPEED2, mask); + + return 0; +} + +U_BOOT_CMD( + pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii, + "pixis_set_sgmii" + " - Enable or disable SGMII mode for a given TSEC \n", + "\npixis_set_sgmii [TSEC num] <on|off|switch>\n" + " TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n" + " on - enables SGMII\n" + " off - disables SGMII\n" + " switch - use switch settings\n"); +#endif + /* * This function takes the non-integral cpu:mpx pll ratio * and converts it to an integer that can be used to assign @@ -398,7 +469,9 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) */ if ((p_cf && !(p_cf_sysclk && p_cf_corepll && p_cf_mpxpll)) || unknown_param) { +#ifdef CONFIG_SYS_LONGHELP puts(cmdtp->help); +#endif return 1; } @@ -428,7 +501,9 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (!(set_px_sysclk(sysclk) && set_px_corepll(corepll) && set_px_mpxpll(mpxpll))) { +#ifdef CONFIG_SYS_LONGHELP puts(cmdtp->help); +#endif return 1; } read_from_px_regs(1); @@ -463,7 +538,7 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( - pixis_reset, CFG_MAXARGS, 1, pixis_reset_cmd, + pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd, "pixis_reset - Reset the board using the FPGA sequencer\n", " pixis_reset\n" " pixis_reset [altbank]\n" diff --git a/board/freescale/common/sgmii_riser.c b/board/freescale/common/sgmii_riser.c new file mode 100644 index 0000000..5ccd6bc --- /dev/null +++ b/board/freescale/common/sgmii_riser.c @@ -0,0 +1,26 @@ +/* + * Freescale SGMII Riser Card + * + * This driver supports the SGMII Riser card found on the + * "DS" style of development board from Freescale. + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * Copyright 2008 Freescale Semiconductor, Inc. + * + */ + +#include <config.h> +#include <common.h> +#include <tsec.h> + +void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num) +{ + int i; + + for (i = 0; i < num; i++) + if (tsec_info[i].flags & TSEC_SGMII) + tsec_info[i].phyaddr += SGMII_RISER_PHY_OFFSET; +} diff --git a/board/freescale/common/sgmii_riser.h b/board/freescale/common/sgmii_riser.h new file mode 100644 index 0000000..8d56a1f --- /dev/null +++ b/board/freescale/common/sgmii_riser.h @@ -0,0 +1,15 @@ +/* + * Freescale SGMII Riser Card + * + * This driver supports the SGMII Riser card found on the + * "DS" style of development board from Freescale. + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * Copyright 2008 Freescale Semiconductor, Inc. + * + */ + +void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num); diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index e53ead0..eb58c7f 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -30,8 +30,8 @@ #include "../common/eeprom.h" -#if !defined(CFG_I2C_EEPROM_CCID) && !defined(CFG_I2C_EEPROM_NXID) -#error "Please define either CFG_I2C_EEPROM_CCID or CFG_I2C_EEPROM_NXID" +#if !defined(CONFIG_SYS_I2C_EEPROM_CCID) && !defined(CONFIG_SYS_I2C_EEPROM_NXID) +#error "Please define either CONFIG_SYS_I2C_EEPROM_CCID or CONFIG_SYS_I2C_EEPROM_NXID" #endif /** @@ -40,7 +40,7 @@ * See application note AN3638 for details. */ static struct __attribute__ ((__packed__)) eeprom { -#ifdef CFG_I2C_EEPROM_CCID +#ifdef CONFIG_SYS_I2C_EEPROM_CCID u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'CCID' */ u8 major; /* 0x04 Board revision, major */ u8 minor; /* 0x05 Board revision, minor */ @@ -53,7 +53,7 @@ static struct __attribute__ ((__packed__)) eeprom { u8 mac[8][6]; /* 0x42 - 0x71 MAC addresses */ u32 crc; /* 0x72 CRC32 checksum */ #endif -#ifdef CFG_I2C_EEPROM_NXID +#ifdef CONFIG_SYS_I2C_EEPROM_NXID u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'NXID' */ u8 sn[12]; /* 0x04 - 0x0F Serial Number */ u8 errata[5]; /* 0x10 - 0x14 Errata Level */ @@ -74,12 +74,12 @@ static struct __attribute__ ((__packed__)) eeprom { /* Set to 1 if we've read EEPROM into memory */ static int has_been_read = 0; -#ifdef CFG_I2C_EEPROM_NXID +#ifdef CONFIG_SYS_I2C_EEPROM_NXID /* Is this a valid NXID EEPROM? */ #define is_valid (*((u32 *)e.id) == (('N' << 24) | ('X' << 16) | ('I' << 8) | 'D')) #endif -#ifdef CFG_I2C_EEPROM_CCID +#ifdef CONFIG_SYS_I2C_EEPROM_CCID /* Is this a valid CCID EEPROM? */ #define is_valid (*((u32 *)e.id) == (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D')) #endif @@ -93,7 +93,7 @@ static void show_eeprom(void) unsigned int crc; /* EEPROM tag ID, either CCID or NXID */ -#ifdef CFG_I2C_EEPROM_NXID +#ifdef CONFIG_SYS_I2C_EEPROM_NXID printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], be32_to_cpu(e.version)); #else @@ -104,7 +104,7 @@ static void show_eeprom(void) printf("SN: %s\n", e.sn); /* Errata level. */ -#ifdef CFG_I2C_EEPROM_NXID +#ifdef CONFIG_SYS_I2C_EEPROM_NXID printf("Errata: %s\n", e.errata); #else printf("Errata: %c%c\n", @@ -152,22 +152,22 @@ static void show_eeprom(void) static int read_eeprom(void) { int ret; -#ifdef CFG_EEPROM_BUS_NUM +#ifdef CONFIG_SYS_EEPROM_BUS_NUM unsigned int bus; #endif if (has_been_read) return 0; -#ifdef CFG_EEPROM_BUS_NUM +#ifdef CONFIG_SYS_EEPROM_BUS_NUM bus = i2c_get_bus_num(); - i2c_set_bus_num(CFG_EEPROM_BUS_NUM); + i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM); #endif - ret = i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN, + ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (void *)&e, sizeof(e)); -#ifdef CFG_EEPROM_BUS_NUM +#ifdef CONFIG_SYS_EEPROM_BUS_NUM i2c_set_bus_num(bus); #endif @@ -188,12 +188,12 @@ static int prog_eeprom(void) int ret, i, length; unsigned int crc; void *p; -#ifdef CFG_EEPROM_BUS_NUM +#ifdef CONFIG_SYS_EEPROM_BUS_NUM unsigned int bus; #endif /* Set the reserved values to 0xFF */ -#ifdef CFG_I2C_EEPROM_NXID +#ifdef CONFIG_SYS_I2C_EEPROM_NXID e.res_0 = 0xFF; memset(e.res_1, 0xFF, sizeof(e.res_1)); #else @@ -204,20 +204,20 @@ static int prog_eeprom(void) crc = crc32(0, (void *)&e, length - 4); e.crc = cpu_to_be32(crc); -#ifdef CFG_EEPROM_BUS_NUM +#ifdef CONFIG_SYS_EEPROM_BUS_NUM bus = i2c_get_bus_num(); - i2c_set_bus_num(CFG_EEPROM_BUS_NUM); + i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM); #endif for (i = 0, p = &e; i < length; i += 8, p += 8) { - ret = i2c_write(CFG_I2C_EEPROM_ADDR, i, CFG_I2C_EEPROM_ADDR_LEN, + ret = i2c_write(CONFIG_SYS_I2C_EEPROM_ADDR, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, p, min((length - i), 8)); if (ret) break; udelay(5000); /* 5ms write cycle timing */ } -#ifdef CFG_EEPROM_BUS_NUM +#ifdef CONFIG_SYS_EEPROM_BUS_NUM i2c_set_bus_num(bus); #endif @@ -343,7 +343,7 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1); break; case 'e': /* errata */ -#ifdef CFG_I2C_EEPROM_NXID +#ifdef CONFIG_SYS_I2C_EEPROM_NXID memset(e.errata, 0, 5); strncpy((char *)e.errata, argv[2], 4); #else @@ -429,7 +429,7 @@ int mac_read_from_eeprom(void) return 0; } -#ifdef CFG_I2C_EEPROM_CCID +#ifdef CONFIG_SYS_I2C_EEPROM_CCID /** * get_cpu_board_revision - get the CPU board revision on 85xx boards @@ -439,11 +439,11 @@ int mac_read_from_eeprom(void) * This function is called before relocation, so we need to read a private * copy of the EEPROM into a local variable on the stack. * - * Also, we assume that CFG_EEPROM_BUS_NUM == CFG_SPD_BUS_NUM. The global - * variable i2c_bus_num must be compile-time initialized to CFG_SPD_BUS_NUM, + * Also, we assume that CONFIG_SYS_EEPROM_BUS_NUM == CONFIG_SYS_SPD_BUS_NUM. The global + * variable i2c_bus_num must be compile-time initialized to CONFIG_SYS_SPD_BUS_NUM, * so that the SPD code will work. This means that all pre-relocation I2C - * operations can only occur on the CFG_SPD_BUS_NUM bus. So if - * CFG_EEPROM_BUS_NUM != CFG_SPD_BUS_NUM, then we can't read the EEPROM when + * operations can only occur on the CONFIG_SYS_SPD_BUS_NUM bus. So if + * CONFIG_SYS_EEPROM_BUS_NUM != CONFIG_SYS_SPD_BUS_NUM, then we can't read the EEPROM when * this function is called. Oh well. */ unsigned int get_cpu_board_revision(void) @@ -454,7 +454,7 @@ unsigned int get_cpu_board_revision(void) u8 minor; /* 0x05 Board revision, minor */ } be; - i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN, + i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (void *)&be, sizeof(be)); if (be.id != (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D')) @@ -463,6 +463,6 @@ unsigned int get_cpu_board_revision(void) if ((be.major == 0xff) && (be.minor == 0xff)) return MPC85XX_CPU_BOARD_REV(0, 0); - return MPC85XX_CPU_BOARD_REV(e.major, e.minor); + return MPC85XX_CPU_BOARD_REV(be.major, be.minor); } #endif |