1 files changed, 403 insertions, 0 deletions
diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c
new file mode 100644
index 0000000..bcac5c1
--- /dev/null
+++ b/board/freescale/bsc9132qds/bsc9132qds.c
@@ -0,0 +1,403 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/io.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <fsl_mdio.h>
+#include <tsec.h>
+#include <mmc.h>
+#include <netdev.h>
+#include <asm/fsl_ifc.h>
+#include <hwconfig.h>
+#include <i2c.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#ifdef CONFIG_PCI
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#endif
+
+#include "../common/qixis.h"
+DECLARE_GLOBAL_DATA_PTR;
+
+
+int board_early_init_f(void)
+{
+	struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR;
+
+	setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
+
+	return 0;
+}
+
+void board_config_serdes_mux(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 pordevsr = in_be32(&gur->pordevsr);
+	u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+
+	switch (srds_cfg) {
+	/* PEX(1) PEX(2) CPRI 2 CPRI 1 */
+	case  1:
+	case  2:
+	case  3:
+	case  4:
+	case  5:
+	case 22:
+	case 23:
+	case 24:
+	case 25:
+	case 26:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x03);
+		break;
+
+	/* PEX(1) PEX(2) SGMII1 CPRI 1 */
+	case  6:
+	case  7:
+	case  8:
+	case  9:
+	case 10:
+	case 27:
+	case 28:
+	case 29:
+	case 30:
+	case 31:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x01);
+		break;
+
+	/* PEX(1) PEX(2) SGMII1 SGMII2 */
+	case 11:
+	case 32:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x00);
+		break;
+
+	/* PEX(1) SGMII2 CPRI 2 CPRI 1 */
+	case 12:
+	case 13:
+	case 14:
+	case 15:
+	case 16:
+	case 33:
+	case 34:
+	case 35:
+	case 36:
+	case 37:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x07);
+		break;
+
+	/* PEX(1) SGMII2 SGMII1 CPRI 1 */
+	case 17:
+	case 18:
+	case 19:
+	case 20:
+	case 21:
+	case 38:
+	case 39:
+	case 40:
+	case 41:
+	case 42:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x05);
+		break;
+
+	/* SGMII1 SGMII2 CPRI 2 CPRI 1 */
+	case 43:
+	case 44:
+	case 45:
+	case 46:
+	case 47:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x0F);
+		break;
+
+
+	default:
+		break;
+	}
+}
+
+int board_early_init_r(void)
+{
+#ifndef CONFIG_SYS_NO_FLASH
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+	/*
+	 * Remap Boot flash region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, flash_esel, BOOKE_PAGESZ_64M, 1);
+
+	set_tlb(1, flashbase + 0x4000000,
+			CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, flash_esel+1, BOOKE_PAGESZ_64M, 1);
+#endif
+	board_config_serdes_mux();
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+	fsl_pcie_init_board(0);
+}
+#endif /* ifdef CONFIG_PCI */
+
+int checkboard(void)
+{
+	struct cpu_type *cpu;
+	u8 sw;
+
+	cpu = gd->cpu;
+	printf("Board: %sQDS\n", cpu->name);
+
+	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x,\n",
+	QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
+
+	sw = QIXIS_READ(brdcfg[0]);
+	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+	printf("IFC chip select:");
+	switch (sw) {
+	case 0:
+		printf("NOR\n");
+		break;
+	case 2:
+		printf("Promjet\n");
+		break;
+	case 4:
+		printf("NAND\n");
+		break;
+	default:
+		printf("Invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+		break;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_TSEC_ENET
+int board_eth_init(bd_t *bis)
+{
+	struct fsl_pq_mdio_info mdio_info;
+	struct tsec_info_struct tsec_info[4];
+	int num = 0;
+
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+	num++;
+
+#endif
+
+#ifdef CONFIG_TSEC2
+	SET_STD_TSEC_INFO(tsec_info[num], 2);
+	num++;
+#endif
+
+	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+	mdio_info.name = DEFAULT_MII_NAME;
+
+	fsl_pq_mdio_init(bis, &mdio_info);
+	tsec_eth_init(bis, tsec_info, num);
+
+	#ifdef CONFIG_PCI
+	pci_eth_init(bis);
+	#endif
+
+	return 0;
+}
+#endif
+
+#define USBMUX_SEL_MASK		0xc0
+#define USBMUX_SEL_UART2	0xc0
+#define USBMUX_SEL_USB		0x40
+#define SPIMUX_SEL_UART3	0x80
+#define GPS_MUX_SEL_GPS		0x40
+
+#define TSEC_1588_CLKIN_MASK	0x03
+#define CON_XCVR_REF_CLK	0x00
+
+int misc_init_r(void)
+{
+	u8 val;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 porbmsr = in_be32(&gur->porbmsr);
+	u32 romloc = (porbmsr >> MPC85XX_PORBMSR_ROMLOC_SHIFT) & 0xf;
+
+	/*Configure 1588 clock-in source from RF Card*/
+	val = QIXIS_READ_I2C(brdcfg[5]);
+	QIXIS_WRITE_I2C(brdcfg[5],
+		(val & ~(TSEC_1588_CLKIN_MASK)) | CON_XCVR_REF_CLK);
+
+	if (hwconfig("uart2") && hwconfig("usb1")) {
+		printf("UART2 and USB cannot work together on the board\n");
+		printf("Remove one from hwconfig and reset\n");
+	} else {
+		if (hwconfig("uart2")) {
+			val = QIXIS_READ_I2C(brdcfg[5]);
+			QIXIS_WRITE_I2C(brdcfg[5],
+				(val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_UART2);
+			clrbits_be32(&gur->pmuxcr3,
+						MPC85xx_PMUXCR3_USB_SEL_MASK);
+			setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART2_SEL);
+		} else {
+			/* By default USB should be selected.
+			* Programming FPGA to select USB. */
+			val = QIXIS_READ_I2C(brdcfg[5]);
+			QIXIS_WRITE_I2C(brdcfg[5],
+				(val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_USB);
+		}
+
+	}
+
+	if (hwconfig("sim")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SPI) {
+
+			val = QIXIS_READ_I2C(brdcfg[3]);
+			QIXIS_WRITE_I2C(brdcfg[3], val|0x10);
+			clrbits_be32(&gur->pmuxcr,
+				MPC85xx_PMUXCR0_SIM_SEL_MASK);
+			setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR0_SIM_SEL);
+		}
+	}
+
+	if (hwconfig("uart3")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SDHC) {
+
+			/* UART3 and SPI1 (Flashes) are muxed together */
+			val = QIXIS_READ_I2C(brdcfg[3]);
+			QIXIS_WRITE_I2C(brdcfg[3], (val | SPIMUX_SEL_UART3));
+			clrbits_be32(&gur->pmuxcr3,
+						MPC85xx_PMUXCR3_UART3_SEL_MASK);
+			setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART3_SEL);
+
+			/* MUX to select UART3 connection to J24 header
+			 * or to GPS */
+			val = QIXIS_READ_I2C(brdcfg[6]);
+			if (hwconfig("gps"))
+				QIXIS_WRITE_I2C(brdcfg[6],
+						(val | GPS_MUX_SEL_GPS));
+			else
+				QIXIS_WRITE_I2C(brdcfg[6],
+						(val & ~(GPS_MUX_SEL_GPS)));
+		}
+	}
+	return 0;
+}
+
+void fdt_del_node_compat(void *blob, const char *compatible)
+{
+	int err;
+	int off = fdt_node_offset_by_compatible(blob, -1, compatible);
+	if (off < 0) {
+		printf("WARNING: could not find compatible node %s: %s.\n",
+			compatible, fdt_strerror(off));
+		return;
+	}
+	err = fdt_del_node(blob, off);
+	if (err < 0) {
+		printf("WARNING: could not remove %s: %s.\n",
+			compatible, fdt_strerror(err));
+	}
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	#if defined(CONFIG_PCI)
+	FT_FSL_PCI_SETUP;
+	#endif
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 porbmsr = in_be32(&gur->porbmsr);
+	u32 romloc = (porbmsr >> MPC85XX_PORBMSR_ROMLOC_SHIFT) & 0xf;
+
+	if (!(hwconfig("uart2") && hwconfig("usb1"))) {
+		/* If uart2 is there in hwconfig remove usb node from
+		 *  device tree */
+
+		if (hwconfig("uart2")) {
+			/* remove dts usb node */
+			fdt_del_node_compat(blob, "fsl-usb2-dr");
+		} else {
+			fdt_fixup_dr_usb(blob, bd);
+			fdt_del_node_and_alias(blob, "serial2");
+		}
+	}
+
+	if (hwconfig("uart3")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SDHC)
+			/* Delete SPI node from the device tree */
+				fdt_del_node_and_alias(blob, "spi1");
+	} else
+		fdt_del_node_and_alias(blob, "serial3");
+
+	if (hwconfig("sim")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SPI) {
+
+			/* remove dts sdhc node */
+			fdt_del_node_compat(blob, "fsl,esdhc");
+		} else if (romloc == PORBMSR_ROMLOC_SDHC) {
+
+			/* remove dts sim node */
+			fdt_del_node_compat(blob, "fsl,sim-v1.0");
+			printf("SIM & SDHC can't work together on the board");
+			printf("\nRemove sim from hwconfig and reset\n");
+		}
+	}
+}
+#endif