summaryrefslogtreecommitdiff
path: root/board/esd/voh405
diff options
context:
space:
mode:
Diffstat (limited to 'board/esd/voh405')
-rw-r--r--board/esd/voh405/flash.c4
-rw-r--r--board/esd/voh405/voh405.c62
2 files changed, 33 insertions, 33 deletions
diff --git a/board/esd/voh405/flash.c b/board/esd/voh405/flash.c
index 89af119..274ada9 100644
--- a/board/esd/voh405/flash.c
+++ b/board/esd/voh405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
int size_val = 0;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
- -CFG_MONITOR_LEN,
+ -CONFIG_SYS_MONITOR_LEN,
0xffffffff,
&flash_info[0]);
diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c
index 115f8b4..ec65ffd 100644
--- a/board/esd/voh405/voh405.c
+++ b/board/esd/voh405/voh405.c
@@ -109,9 +109,9 @@ int misc_init_r (void)
unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
unsigned short *lcd_contrast =
- (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 4);
+ (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 4);
unsigned short *lcd_backlight =
- (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 6);
+ (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 6);
unsigned char *dst;
ulong len = sizeof(fpgadata);
int status;
@@ -119,8 +119,8 @@ int misc_init_r (void)
int i;
char *str;
- dst = malloc(CFG_FPGA_MAX_SIZE);
- if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+ dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+ if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
printf ("GUNZIP ERROR - must RESET board to recover\n");
do_reset (NULL, 0, 0, NULL);
}
@@ -183,22 +183,22 @@ int misc_init_r (void)
/*
* Reset external DUARTs
*/
- out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */
udelay(10); /* wait 10us */
- out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */
udelay(1000); /* wait 1ms */
/*
* Set NAND-FLASH GPIO signals to default
*/
- out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
- out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_NAND_CE);
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE);
/*
* Setup EEPROM write protection
*/
- out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
- out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CFG_EEPROM_WP);
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
+ out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP);
/*
* Enable interrupts in exar duart mcr[3]
@@ -212,29 +212,29 @@ int misc_init_r (void)
str = getenv("bd_type");
if (strcmp(str, "voh405_bw") == 0) {
lcd_setup(0, 1);
- lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+ lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
regs_13704_320_240_4bpp,
sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
logo_bmp_320, sizeof(logo_bmp_320));
} else if (strcmp(str, "voh405_bwbw") == 0) {
lcd_setup(0, 1);
- lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+ lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
regs_13704_320_240_4bpp,
sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
logo_bmp_320, sizeof(logo_bmp_320));
lcd_setup(1, 1);
- lcd_init((uchar *)CFG_LCD_BIG_REG, (uchar *)CFG_LCD_BIG_MEM,
+ lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
regs_13806_320_240_4bpp,
sizeof(regs_13806_320_240_4bpp)/sizeof(regs_13806_320_240_4bpp[0]),
logo_bmp_320, sizeof(logo_bmp_320));
} else if (strcmp(str, "voh405_bwc") == 0) {
lcd_setup(0, 1);
- lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+ lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
regs_13704_320_240_4bpp,
sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
logo_bmp_320, sizeof(logo_bmp_320));
lcd_setup(1, 0);
- lcd_init((uchar *)CFG_LCD_BIG_REG, (uchar *)CFG_LCD_BIG_MEM,
+ lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
regs_13806_640_480_16bpp,
sizeof(regs_13806_640_480_16bpp)/sizeof(regs_13806_640_480_16bpp[0]),
logo_bmp_640, sizeof(logo_bmp_640));
@@ -246,8 +246,8 @@ int misc_init_r (void)
/*
* Set invert bit in small lcd controller
*/
- out_8((unsigned char *)(CFG_LCD_SMALL_REG + 2),
- in_8((unsigned char *)(CFG_LCD_SMALL_REG + 2)) | 0x01);
+ out_8((unsigned char *)(CONFIG_SYS_LCD_SMALL_REG + 2),
+ in_8((unsigned char *)(CONFIG_SYS_LCD_SMALL_REG + 2)) | 0x01);
/*
* Set default contrast voltage on epson vga controller
@@ -262,7 +262,7 @@ int misc_init_r (void)
/*
* Enable external I2C bus
*/
- out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CFG_IIC_ON);
+ out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_IIC_ON);
return (0);
}
@@ -300,15 +300,15 @@ int checkboard (void)
void ide_set_reset(int on)
{
volatile unsigned short *fpga_mode =
- (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+ (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
/*
* Assert or deassert CompactFlash Reset Pin
*/
if (on) { /* assert RESET */
- *fpga_mode &= ~(CFG_FPGA_CTRL_CF_RESET);
+ *fpga_mode &= ~(CONFIG_SYS_FPGA_CTRL_CF_RESET);
} else { /* release RESET */
- *fpga_mode |= CFG_FPGA_CTRL_CF_RESET;
+ *fpga_mode |= CONFIG_SYS_FPGA_CTRL_CF_RESET;
}
}
#endif /* CONFIG_IDE_RESET */
@@ -326,7 +326,7 @@ void reset_phy(void)
}
#endif
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
/* Input: <dev_addr> I2C address of EEPROM device to enable.
* <state> -1: deliver current state
* 0: disable write
@@ -337,23 +337,23 @@ void reset_phy(void)
*/
int eeprom_write_enable (unsigned dev_addr, int state)
{
- if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+ if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
return -1;
} else {
switch (state) {
case 1:
/* Enable write access, clear bit GPIO0. */
- out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_EEPROM_WP);
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
state = 0;
break;
case 0:
/* Disable write access, set bit GPIO0. */
- out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
state = 0;
break;
default:
/* Read current status back. */
- state = (0 == (in_be32((void*)GPIO0_OR) & CFG_EEPROM_WP));
+ state = (0 == (in_be32((void*)GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
break;
}
}
@@ -367,21 +367,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (query) {
/* Query write access state. */
- state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+ state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
if (state < 0) {
puts ("Query of write access state failed.\n");
} else {
printf ("Write access for device 0x%0x is %sabled.\n",
- CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+ CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
state = 0;
}
} else {
if ('0' == argv[1][0]) {
/* Disable write access. */
- state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+ state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
} else {
/* Enable write access. */
- state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+ state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
}
if (state < 0) {
puts ("Setup of write access state failed.\n");
@@ -394,4 +394,4 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"eepwren - Enable / disable / query EEPROM write access\n",
NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */