summaryrefslogtreecommitdiff
path: root/board/esd/pmc440
diff options
context:
space:
mode:
Diffstat (limited to 'board/esd/pmc440')
-rw-r--r--board/esd/pmc440/cmd_pmc440.c14
-rw-r--r--board/esd/pmc440/config.mk2
-rw-r--r--board/esd/pmc440/init.S26
-rw-r--r--board/esd/pmc440/pmc440.c56
-rw-r--r--board/esd/pmc440/pmc440.h4
-rw-r--r--board/esd/pmc440/sdram.c2
-rw-r--r--board/esd/pmc440/u-boot.lds2
7 files changed, 53 insertions, 53 deletions
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c
index 74cf4c3..38ee74e 100644
--- a/board/esd/pmc440/cmd_pmc440.c
+++ b/board/esd/pmc440/cmd_pmc440.c
@@ -323,7 +323,7 @@ int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]
}
printf("Writing boot EEPROM ...\n");
- if (bootstrap_eeprom_write(CFG_I2C_BOOT_EEPROM_ADDR,
+ if (bootstrap_eeprom_write(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
0, (uchar*)sdsdp, count) != 0)
printf("bootstrap_eeprom_write failed\n");
else
@@ -513,7 +513,7 @@ U_BOOT_CMD(
"<pciaddr> (pciaddr will be aligned to 256MB)\n"
);
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int query = argc == 1;
@@ -521,21 +521,21 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (query) {
/* Query write access state. */
- state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, -1);
+ state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1);
if (state < 0) {
puts("Query of write access state failed.\n");
} else {
printf("Write access for device 0x%0x is %sabled.\n",
- CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+ CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
state = 0;
}
} else {
if ('0' == argv[1][0]) {
/* Disable write access. */
- state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 0);
+ state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 0);
} else {
/* Enable write access. */
- state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 1);
+ state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 1);
}
if (state < 0) {
puts("Setup of write access state failed.\n");
@@ -547,6 +547,6 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"eepwren - Enable / disable / query EEPROM write access\n",
NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
#endif /* CONFIG_CMD_BSP */
diff --git a/board/esd/pmc440/config.mk b/board/esd/pmc440/config.mk
index e62b8d3..0c4d582 100644
--- a/board/esd/pmc440/config.mk
+++ b/board/esd/pmc440/config.mk
@@ -37,5 +37,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
endif
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
diff --git a/board/esd/pmc440/init.S b/board/esd/pmc440/init.S
index 148af71..26a8282 100644
--- a/board/esd/pmc440/init.S
+++ b/board/esd/pmc440/init.S
@@ -44,28 +44,28 @@ tlbtab:
* speed up boot process. It is patched after relocation to enable SA_I
*/
#ifndef CONFIG_NAND_SPL
- tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+ tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
#else
- tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
+ tlbentry( CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
#endif
/* TLB-entry for DDR SDRAM (Up to 2GB) */
#ifdef CONFIG_4xx_DCACHE
- tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
+ tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
#else
- tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
#endif
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
- tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+ tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
#endif
/* TLB-entry for PCI Memory */
- tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
/* TLB-entries for EBC */
/* PMC440 maps EBC to 0xef000000 which is handled by the peripheral
@@ -76,7 +76,7 @@ tlbtab:
tlbentry( 0xc0000000, SZ_256M, 0xc0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
/* TLB-entry for NAND */
- tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_NAND_ADDR, SZ_1K, CONFIG_SYS_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
/* TLB-entry for Internal Registers & OCM */
tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I )
@@ -98,8 +98,8 @@ tlbtab:
* For NAND booting the first TLB has to be reconfigured to full size
* and with caching disabled after running from RAM!
*/
-#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 1)
+#define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1)
#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
.globl reconfig_tlb0
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index 85ef26f..013815e 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -44,7 +44,7 @@
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
ulong flash_get_size(ulong base, int banknum);
int pci_is_66mhz(void);
@@ -71,7 +71,7 @@ struct serial_device *default_serial_console(void)
/* mark scratchreg valid */
scratchreg = (scratchreg & 0xffffff00) | 0x80;
- i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR,
+ i = bootstrap_eeprom_read(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
0x10, buf, 4);
if ((i != -1) && (buf[0] == 0x19) && (buf[1] == 0x75)) {
scratchreg |= buf[2];
@@ -103,7 +103,7 @@ int board_early_init_f(void)
/*
* Setup the GPIO pins
- * TODO: setup GPIOs via CFG_4xx_GPIO_TABLE in board's config file
+ * TODO: setup GPIOs via CONFIG_SYS_4xx_GPIO_TABLE in board's config file
*/
out32(GPIO0_OR, 0x40000002);
out32(GPIO0_TCR, 0x4c90011f);
@@ -190,7 +190,7 @@ int board_early_init_f(void)
SDR0_CUST0_NDFC_ENABLE |
SDR0_CUST0_NDFC_BW_8_BIT |
SDR0_CUST0_NDFC_ARE_MASK |
- (0x80000000 >> (28 + CFG_NAND_CS));
+ (0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
mtsdr(SDR0_CUST0, sdr0_cust0);
return 0;
@@ -242,7 +242,7 @@ int misc_init_r(void)
#ifdef CONFIG_ENV_IS_IN_FLASH
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
- -CFG_MONITOR_LEN,
+ -CONFIG_SYS_MONITOR_LEN,
0xffffffff,
&flash_info[0]);
@@ -498,7 +498,7 @@ int pci_pre_init(struct pci_controller *hose)
* inbound map (PIM). But the bootstrap config choices are limited and
* may not be sufficient for a given board.
*/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
char *ptmla_str, *ptmms_str;
@@ -516,8 +516,8 @@ void pci_target_init(struct pci_controller *hose)
*/
out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */
/* - disabled b4 setting */
- out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
- out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM0MA, 0xc0000001); /* 1G + No prefetching, */
/* and enable region */
@@ -563,7 +563,7 @@ void pci_target_init(struct pci_controller *hose)
/* Program the board's vendor id */
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
- CFG_PCI_SUBSYS_VENDORID);
+ CONFIG_SYS_PCI_SUBSYS_VENDORID);
/* disabled for PMC405 backward compatibility */
/* Configure command register as bus master */
@@ -581,9 +581,9 @@ void pci_target_init(struct pci_controller *hose)
if (!is_monarch()) {
/* Program the board's subsystem id/classcode */
pci_write_config_word(0, PCI_SUBSYSTEM_ID,
- CFG_PCI_SUBSYS_ID_NONMONARCH);
+ CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH);
pci_write_config_word(0, PCI_CLASS_SUB_CODE,
- CFG_PCI_CLASSCODE_NONMONARCH);
+ CONFIG_SYS_PCI_CLASSCODE_NONMONARCH);
/* PCI configuration done: release ERREADY */
out_be32((void*)GPIO1_OR,
@@ -593,17 +593,17 @@ void pci_target_init(struct pci_controller *hose)
} else {
/* Program the board's subsystem id/classcode */
pci_write_config_word(0, PCI_SUBSYSTEM_ID,
- CFG_PCI_SUBSYS_ID_MONARCH);
+ CONFIG_SYS_PCI_SUBSYS_ID_MONARCH);
pci_write_config_word(0, PCI_CLASS_SUB_CODE,
- CFG_PCI_CLASSCODE_MONARCH);
+ CONFIG_SYS_PCI_CLASSCODE_MONARCH);
}
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
/*
* pci_master_init
*/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
void pci_master_init(struct pci_controller *hose)
{
unsigned short temp_short;
@@ -620,7 +620,7 @@ void pci_master_init(struct pci_controller *hose)
PCI_COMMAND_MEMORY);
}
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
static void wait_for_pci_ready(void)
{
@@ -708,7 +708,7 @@ void reset_phy(void)
}
#endif
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
/*
* Input: <dev_addr> I2C address of EEPROM device to enable.
* <state> -1: deliver current state
@@ -720,8 +720,8 @@ void reset_phy(void)
*/
int eeprom_write_enable(unsigned dev_addr, int state)
{
- if ((CFG_I2C_EEPROM_ADDR != dev_addr) &&
- (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
+ if ((CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) &&
+ (CONFIG_SYS_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
return -1;
} else {
switch (state) {
@@ -743,9 +743,9 @@ int eeprom_write_enable(unsigned dev_addr, int state)
}
return state;
}
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
-#define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3
int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
uchar *buffer, unsigned cnt)
{
@@ -753,7 +753,7 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
unsigned blk_off;
int rcode = 0;
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
eeprom_write_enable(dev_addr, 1);
#endif
/*
@@ -776,7 +776,7 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
len = end - offset;
-#define BOOT_EEPROM_PAGE_SIZE (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
+#define BOOT_EEPROM_PAGE_SIZE (1 << CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS)
#define BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1))
maxlen = BOOT_EEPROM_PAGE_SIZE -
@@ -793,11 +793,11 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
buffer += len;
offset += len;
-#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
- udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
+ udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
#endif
}
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
eeprom_write_enable(dev_addr, 0);
#endif
return rcode;
@@ -845,7 +845,7 @@ int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset,
return rcode;
}
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_BOARD_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
int usb_board_init(void)
{
char *act = getenv("usbact");
@@ -875,4 +875,4 @@ int usb_board_init_fail(void)
usb_board_stop();
return 0;
}
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_BOARD_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */
diff --git a/board/esd/pmc440/pmc440.h b/board/esd/pmc440/pmc440.h
index 7e70fd1..d834f25 100644
--- a/board/esd/pmc440/pmc440.h
+++ b/board/esd/pmc440/pmc440.h
@@ -54,7 +54,7 @@
/*-----------------------------------------------------------------------
* FPGA interface
*/
-#define FPGA_BA CFG_FPGA_BASE0
+#define FPGA_BA CONFIG_SYS_FPGA_BASE0
#define FPGA_OUT32(p,v) out_be32(((void*)(p)), (v))
#define FPGA_IN32(p) in_be32((void*)(p))
#define FPGA_SETBITS(p,v) out_be32(((void*)(p)), in_be32((void*)(p)) | (v))
@@ -134,7 +134,7 @@ typedef struct pmc440_fpga_s pmc440_fpga_t;
#define HOSTCTRL_HCINT_GATE (1 << 1)
#define HOSTCTRL_HCINT_FLAG (1 << 0)
-#define NGCC_CTRL_BASE (CFG_FPGA_BASE0 + 0x80000)
+#define NGCC_CTRL_BASE (CONFIG_SYS_FPGA_BASE0 + 0x80000)
#define NGCC_CTRL_FPGARST_N (1 << 2)
/*-----------------------------------------------------------------------
diff --git a/board/esd/pmc440/sdram.c b/board/esd/pmc440/sdram.c
index c7294c9..197857a 100644
--- a/board/esd/pmc440/sdram.c
+++ b/board/esd/pmc440/sdram.c
@@ -111,5 +111,5 @@ phys_size_t initdram (int board_type)
*/
set_mcsr(get_mcsr());
- return (CFG_MBYTES_SDRAM << 20);
+ return (CONFIG_SYS_MBYTES_SDRAM << 20);
}
diff --git a/board/esd/pmc440/u-boot.lds b/board/esd/pmc440/u-boot.lds
index b20fb1c..3cfec83 100644
--- a/board/esd/pmc440/u-boot.lds
+++ b/board/esd/pmc440/u-boot.lds
@@ -137,7 +137,7 @@ SECTIONS
*(COMMON)
}
- ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+ ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
_end = . ;
PROVIDE (end = .);
generated by cgit v1.1 at 2024-11-16 15:11:47 +0000