diff options
Diffstat (limited to 'board/esd/pmc405')
| -rw-r--r-- | board/esd/pmc405/config.mk | 6 | ||||
| -rw-r--r-- | board/esd/pmc405/pmc405.c | 121 |
2 files changed, 40 insertions, 87 deletions
diff --git a/board/esd/pmc405/config.mk b/board/esd/pmc405/config.mk index fc2794d..5a3fc4b 100644 --- a/board/esd/pmc405/config.mk +++ b/board/esd/pmc405/config.mk @@ -21,8 +21,4 @@ # MA 02111-1307 USA # -# -# esd PMC405 boards -# - -TEXT_BASE = 0xFFFC0000 +TEXT_BASE = 0xFFF80000 diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c index 975b6d6..94caa6c 100644 --- a/board/esd/pmc405/pmc405.c +++ b/board/esd/pmc405/pmc405.c @@ -2,7 +2,7 @@ * (C) Copyright 2001-2003 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * (C) Copyright 2005 + * (C) Copyright 2005-2009 * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com * * See file CREDITS for list of people who contributed to this @@ -26,6 +26,7 @@ #include <common.h> #include <asm/processor.h> +#include <asm/io.h> #include <command.h> #include <malloc.h> @@ -40,7 +41,6 @@ const unsigned char fpgadata[] = }; int filesize = sizeof(fpgadata); - int board_early_init_f (void) { /* @@ -55,107 +55,104 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicer, 0x00000000); /* disable all ints */ + mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ + mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ + mtdcr(uictr, 0x10000000); /* set int trigger levels */ + mtdcr(uicvcr, 0x00000001); /* set vect base=0, INT0 highest priority */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ /* - * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us + * EBC Configuration Register: + * set ready timeout to 512 ebc-clks -> ca. 15 us */ mtebc (epcr, 0xa8400000); /* * Setup GPIO pins */ - - mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_FPGA_INIT | \ - CONFIG_SYS_FPGA_DONE | \ - CONFIG_SYS_XEREADY | \ - CONFIG_SYS_NONMONARCH | \ + mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_FPGA_INIT | + CONFIG_SYS_FPGA_DONE | + CONFIG_SYS_XEREADY | + CONFIG_SYS_NONMONARCH | CONFIG_SYS_REV1_2) << 5)); - if (!(in32(GPIO0_IR) & CONFIG_SYS_REV1_2)) { + if (!(in_be32((void *)GPIO0_IR) & CONFIG_SYS_REV1_2)) { /* rev 1.2 boards */ - mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_INTA_FAKE | \ + mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_INTA_FAKE | CONFIG_SYS_SELF_RST) << 5)); } - out32(GPIO0_OR, 0); - out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG | CONFIG_SYS_FPGA_CLK | CONFIG_SYS_FPGA_DATA | CONFIG_SYS_XEREADY); /* setup for output */ + out_be32((void *)GPIO0_OR, CONFIG_SYS_VPEN); + /* setup for output */ + out_be32((void *)GPIO0_TCR, CONFIG_SYS_FPGA_PRG | CONFIG_SYS_FPGA_CLK | + CONFIG_SYS_FPGA_DATA | CONFIG_SYS_XEREADY | CONFIG_SYS_VPEN); - /* - check if rev1_2 is low, then: - * - set/reset CONFIG_SYS_INTA_FAKE/CONFIG_SYS_SELF_RST in TCR to assert INTA# or SELFRST# + /* + * - check if rev1_2 is low, then: + * - set/reset CONFIG_SYS_INTA_FAKE/CONFIG_SYS_SELF_RST + * in TCR to assert INTA# or SELFRST# */ - return 0; } - -/* ------------------------------------------------------------------------- */ - - int misc_init_r (void) { /* adjust flash start and offset */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; - out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_XEREADY); /* deassert EREADY# */ + /* deassert EREADY# */ + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) | CONFIG_SYS_XEREADY); return (0); } ushort pmc405_pci_subsys_deviceid(void) { ulong val; - val = in32(GPIO0_IR); + + val = in_be32((void *)GPIO0_IR); if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */ - if (val & CONFIG_SYS_NONMONARCH) { /* monarch# signal */ + /* check monarch# signal */ + if (val & CONFIG_SYS_NONMONARCH) return CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH; - } return CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH; } return CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH; } /* - * Check Board Identity: + * Check Board Identity */ int checkboard (void) { ulong val; - char str[64]; - int i = getenv_r ("serial#", str, sizeof(str)); + int i = getenv_r("serial#", str, sizeof(str)); puts ("Board: "); - if (i == -1) { + if (i == -1) puts ("### No HW ID - assuming PMC405"); - } else { + else puts(str); - } - val = in32(GPIO0_IR); + val = in_be32((void *)GPIO0_IR); if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */ puts(" rev1.2 ("); - if (val & CONFIG_SYS_NONMONARCH) { /* monarch# signal */ + if (val & CONFIG_SYS_NONMONARCH) /* monarch# signal */ puts("non-"); - } puts("monarch)"); - } else { + } else puts(" <=rev1.1"); - } putc ('\n'); return 0; } -/* ------------------------------------------------------------------------- */ void reset_phy(void) { #ifdef CONFIG_LXT971_NO_SLEEP @@ -166,43 +163,3 @@ void reset_phy(void) lxt971_no_sleep(); #endif } - - -int do_cantest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - ulong addr; - volatile uchar *ptr; - volatile uchar val; - int i; - - addr = simple_strtol (argv[1], NULL, 16) + 0x16; - - i = 0; - for (;;) { - ptr = (uchar *)addr; - for (i=0; i<8; i++) { - *ptr = i; - val = *ptr; - - if (val != i) { - printf("ERROR: addr=%p write=0x%02X, read=0x%02X\n", ptr, i, val); - return 0; - } - - /* Abort if ctrl-c was pressed */ - if (ctrlc()) { - puts("\nAbort\n"); - return 0; - } - - ptr++; - } - } - - return 0; -} -U_BOOT_CMD( - cantest, 3, 1, do_cantest, - "Test CAN controller", - NULL - ); |