diff options
Diffstat (limited to 'board/esd/hh405/hh405.c')
-rw-r--r-- | board/esd/hh405/hh405.c | 141 |
1 files changed, 94 insertions, 47 deletions
diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index a3e935a..99fd556 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -5,6 +5,9 @@ * (C) Copyright 2005 * Stefan Roese, DENX Software Engineering, sr@denx.de. * + * (C) Copyright 2006 + * Matthias Fuchs, esd GmbH, matthias.fuchs@esd-electronics.com + * * See file CREDITS for list of people who contributed to this * project. * @@ -31,7 +34,6 @@ #include <pci.h> #include <sm501.h> - #ifdef CONFIG_VIDEO_SM501 #define SWAP32(x) ((((x) & 0x000000ff) << 24) | (((x) & 0x0000ff00) << 8)|\ @@ -66,10 +68,12 @@ static const SMI_REGS init_regs_800x600 [] = {0x00040, SWAP32(0x00021807)}, {0x00044, SWAP32(0x221a0a01)}, {0x00054, SWAP32(0x00000000)}, + /* GPIO */ + {0x1000c, SWAP32(0xfffffff0)}, /* GPIO32..63 direction */ /* panel control regs... */ {0x80000, SWAP32(0x0f013105)}, /* panel display control: 16-bit RGB 5:6:5 mode */ {0x80004, SWAP32(0xc428bb17)}, /* panel panning control ??? */ - {0x8000C, SWAP32(0x00000000)}, /* panel fb address */ + {0x8000C, SWAP32(0x00010000)}, /* panel fb address */ {0x80010, SWAP32(0x06400640)}, /* panel fb offset/window width */ {0x80014, SWAP32(0x03200000)}, /* panel fb width (0x320=800) */ {0x80018, SWAP32(0x02580000)}, /* panel fb height (0x258=600) */ @@ -100,10 +104,12 @@ static const SMI_REGS init_regs_1024x768 [] = {0x00040, SWAP32(0x00021807)}, {0x00044, SWAP32(0x011a0a01)}, {0x00054, SWAP32(0x00000000)}, + /* GPIO */ + {0x1000c, SWAP32(0xfffffff0)}, /* GPIO32..63 direction */ /* panel control regs... */ {0x80000, SWAP32(0x0f013105)}, /* panel display control: 16-bit RGB 5:6:5 mode */ {0x80004, SWAP32(0xc428bb17)}, /* panel panning control ??? */ - {0x8000C, SWAP32(0x00000000)}, /* panel fb address */ + {0x8000C, SWAP32(0x00010000)}, /* panel fb address */ {0x80010, SWAP32(0x08000800)}, /* panel fb offset/window width */ {0x80014, SWAP32(0x04000000)}, /* panel fb width (0x400=1024) */ {0x80018, SWAP32(0x03000000)}, /* panel fb height (0x300=768) */ @@ -144,10 +150,12 @@ static const SMI_REGS init_regs_800x600 [] = {0x00040, SWAP32(0x00021807)}, {0x00044, SWAP32(0x221a0a01)}, {0x00054, SWAP32(0x00000000)}, + /* GPIO */ + {0x1000c, SWAP32(0xfffffff0)}, /* GPIO32..63 direction */ /* panel control regs... */ {0x80000, SWAP32(0x0f013106)}, /* panel display control: 32-bit RGB 8:8:8 mode */ {0x80004, SWAP32(0xc428bb17)}, /* panel panning control ??? */ - {0x8000C, SWAP32(0x00000000)}, /* panel fb address */ + {0x8000C, SWAP32(0x00010000)}, /* panel fb address */ {0x80010, SWAP32(0x0c800c80)}, /* panel fb offset/window width */ {0x80014, SWAP32(0x03200000)}, /* panel fb width (0x320=800) */ {0x80018, SWAP32(0x02580000)}, /* panel fb height (0x258=600) */ @@ -178,10 +186,12 @@ static const SMI_REGS init_regs_1024x768 [] = {0x00040, SWAP32(0x00021807)}, {0x00044, SWAP32(0x011a0a01)}, {0x00054, SWAP32(0x00000000)}, + /* GPIO */ + {0x1000c, SWAP32(0xfffffff0)}, /* GPIO32..63 direction */ /* panel control regs... */ {0x80000, SWAP32(0x0f013106)}, /* panel display control: 32-bit RGB 8:8:8 mode */ {0x80004, SWAP32(0xc428bb17)}, /* panel panning control ??? */ - {0x8000C, SWAP32(0x00000000)}, /* panel fb address */ + {0x8000C, SWAP32(0x00010000)}, /* panel fb address */ {0x80010, SWAP32(0x10001000)}, /* panel fb offset/window width */ {0x80014, SWAP32(0x04000000)}, /* panel fb width (0x400=1024) */ {0x80018, SWAP32(0x03000000)}, /* panel fb height (0x300=768) */ @@ -272,6 +282,9 @@ au_image_t au_image[] = { int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0])); +/* + * Get version of HH405 board from GPIO's + */ int board_revision(void) { unsigned long osrh_reg; @@ -280,10 +293,6 @@ int board_revision(void) unsigned long value; /* - * Get version of HH405 board from GPIO's - */ - - /* * Setup GPIO pins (BLAST/GPIO0 and GPIO9 as GPIO) */ osrh_reg = in32(GPIO0_OSRH); @@ -305,15 +314,13 @@ int board_revision(void) if (value & 0x80000000) { /* Revision 1.0 or 1.1 detected */ - return 0x0101; + return 1; } else { if (value & 0x00400000) { /* unused */ - return 0x0103; + return 3; } else { - /* Revision >= 2.0 detected */ - /* rev. 2.x uses four SM501 GPIOs for revision coding */ - return 0x0200; + return 2; } } } @@ -349,6 +356,38 @@ int board_early_init_f (void) return 0; } +int cf_enable(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + int i; + + volatile unsigned short *fpga_ctrl = + (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL); + volatile unsigned short *fpga_status = + (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 2); + + if (gd->board_type >= 2) { + if (*fpga_status & CFG_FPGA_STATUS_CF_DETECT) { + if (!(*fpga_ctrl & CFG_FPGA_CTRL_CF_BUS_EN)) { + *fpga_ctrl &= ~CFG_FPGA_CTRL_CF_PWRN; + + for (i=0; i<300; i++) + udelay(1000); + + *fpga_ctrl |= CFG_FPGA_CTRL_CF_BUS_EN; + + for (i=0; i<20; i++) + udelay(1000); + } + } else { + *fpga_ctrl &= ~CFG_FPGA_CTRL_CF_BUS_EN; + *fpga_ctrl |= CFG_FPGA_CTRL_CF_PWRN; + } + } + + return 0; +} int misc_init_r (void) { @@ -433,9 +472,6 @@ int misc_init_r (void) * Write Board revision into FPGA */ *fpga_ctrl |= gd->board_type & 0x0003; - if (gd->board_type >= 0x0200) { - *fpga_ctrl |= CFG_FPGA_CTRL_CF_BUS_EN; - } /* * Setup and enable EEPROM write protection @@ -471,7 +507,7 @@ int misc_init_r (void) contrast0 = simple_strtol(str, NULL, 16); if (contrast0 > 255) { printf("ERROR: contrast0 value too high (0x%lx)!\n", contrast0); - contrast0 = 0; + contrast0 = 0xffffffff; } } @@ -544,9 +580,9 @@ int misc_init_r (void) */ *fpga_ctrl |= CFG_FPGA_CTRL_VGA0_BL | CFG_FPGA_CTRL_VGA0_BL_MODE; /* - * Set lcd clock (small epson) + * Set lcd clock (small epson), enable 1-wire interface */ - *fpga_ctrl |= LCD_CLK_08330; + *fpga_ctrl |= LCD_CLK_08330 | CFG_FPGA_CTRL_OW_ENABLE; lcd_setup(0, 1); lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM, @@ -565,8 +601,10 @@ int misc_init_r (void) puts("VGA: SM501 with 8 MB "); if (strcmp(str, "ppc221") == 0) { printf("(800*600, %dbpp)\n", BPP); + *lcd_backlight = 0x002d; /* max. allowed brightness */ } else if (strcmp(str, "ppc231") == 0) { printf("(1024*768, %dbpp)\n", BPP); + *lcd_backlight = 0x0000; } else { printf("Unsupported bd_type defined (%s) -> No display configured!\n", str); return 0; @@ -578,6 +616,8 @@ int misc_init_r (void) #endif /* CONFIG_VIDEO_SM501 */ } + cf_enable(); + return (0); } @@ -608,14 +648,7 @@ int checkboard (void) } gd->board_type = board_revision(); - printf(", Rev %ld.%ld)\n", - (gd->board_type >> 8) & 0xff, - gd->board_type & 0xff); - - /* - * Disable sleep mode in LXT971 - */ - lxt971_no_sleep(); + printf(", Rev %ld.x)\n", gd->board_type); return 0; } @@ -637,28 +670,27 @@ long int initdram (int board_type) } -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - - #ifdef CONFIG_IDE_RESET void ide_set_reset(int on) { + DECLARE_GLOBAL_DATA_PTR; + volatile unsigned short *fpga_mode = (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL); + volatile unsigned short *fpga_status = + (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 2); - /* - * Assert or deassert CompactFlash Reset Pin - */ - if (on) { /* assert RESET */ - *fpga_mode &= ~(CFG_FPGA_CTRL_CF_RESET); - } else { /* release RESET */ - *fpga_mode |= CFG_FPGA_CTRL_CF_RESET; + if (((gd->board_type >= 2) && (*fpga_status & CFG_FPGA_STATUS_CF_DETECT)) || + (gd->board_type < 2)) { + /* + * Assert or deassert CompactFlash Reset Pin + */ + if (on) { /* assert RESET */ + cf_enable(); + *fpga_mode &= ~(CFG_FPGA_CTRL_CF_RESET); + } else { /* release RESET */ + *fpga_mode |= CFG_FPGA_CTRL_CF_RESET; + } } } #endif /* CONFIG_IDE_RESET */ @@ -778,8 +810,7 @@ void video_get_info_str (int line_number, char *info) strcat(str, " (Missing bd_type!"); } - sprintf(str2, ", Rev %ld.%ld)", - (gd->board_type >> 8) & 0xff, gd->board_type & 0xff); + sprintf(str2, ", Rev %ld.x)", gd->board_type); strcat(str, str2); strcpy(info, str); } else { @@ -822,7 +853,11 @@ unsigned int board_video_get_fb (void) devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0); if (devbusfn != -1) { pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, (u32 *)&addr); - return (addr & 0xfffffffe); + addr &= 0xfffffffe; +#ifdef CONFIG_VIDEO_SM501_FBMEM_OFFSET + addr += CONFIG_VIDEO_SM501_FBMEM_OFFSET; +#endif + return addr; } return 0; @@ -875,3 +910,15 @@ int board_get_height (void) } #endif /* CONFIG_VIDEO_SM501 */ + + +void reset_phy(void) +{ +#ifdef CONFIG_LXT971_NO_SLEEP + + /* + * Disable sleep mode in LXT971 + */ + lxt971_no_sleep(); +#endif +} |