diff options
Diffstat (limited to 'board/esd/cpci5200/cpci5200.c')
| -rw-r--r-- | board/esd/cpci5200/cpci5200.c | 295 |
1 files changed, 295 insertions, 0 deletions
diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c new file mode 100644 index 0000000..01c4171 --- /dev/null +++ b/board/esd/cpci5200/cpci5200.c @@ -0,0 +1,295 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * cpci5200.c - main board support/init for the esd cpci5200. + */ + +#include <common.h> +#include <mpc5xxx.h> +#include <pci.h> +#include <command.h> + +#include "mt46v16m16-75.h" + +void init_ata_reset(void); + +static void sdram_start(int hi_addr) +{ + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + *(vu_long *) MPC5XXX_SDRAM_CTRL = + SDRAM_CONTROL | 0x80000000 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* precharge all banks */ + *(vu_long *) MPC5XXX_SDRAM_CTRL = + SDRAM_CONTROL | 0x80000002 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* set mode register: extended mode */ + *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_EMODE; + __asm__ volatile ("sync"); + + /* set mode register: reset DLL */ + *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; + __asm__ volatile ("sync"); + + /* precharge all banks */ + *(vu_long *) MPC5XXX_SDRAM_CTRL = + SDRAM_CONTROL | 0x80000002 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* auto refresh */ + *(vu_long *) MPC5XXX_SDRAM_CTRL = + SDRAM_CONTROL | 0x80000004 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* set mode register */ + *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE; + __asm__ volatile ("sync"); + + /* normal operation */ + *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; + __asm__ volatile ("sync"); +} + +/* + * ATTENTION: Although partially referenced initdram does NOT make real use + * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE + * is something else than 0x00000000. + */ + +long int initdram(int board_type) +{ + ulong dramsize = 0; + ulong test1, test2; + + /* setup SDRAM chip selects */ + *(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ + *(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */ + __asm__ volatile ("sync"); + + /* setup config registers */ + *(vu_long *) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + __asm__ volatile ("sync"); + + /* set tap delay */ + *(vu_long *) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; + __asm__ volatile ("sync"); + + /* find RAM size using SDRAM CS0 only */ + sdram_start(0); + test1 = get_ram_size((ulong *) CFG_SDRAM_BASE, 0x80000000); + sdram_start(1); + test2 = get_ram_size((ulong *) CFG_SDRAM_BASE, 0x80000000); + + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) { + dramsize = 0; + } + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + *(vu_long *) MPC5XXX_SDRAM_CS0CFG = + 0x13 + __builtin_ffs(dramsize >> 20) - 1; + /* let SDRAM CS1 start right after CS0 */ + *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e; /* 2G */ + } else { +#if 0 + *(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ + /* let SDRAM CS1 start right after CS0 */ + *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e; /* 2G */ +#else + *(vu_long *) MPC5XXX_SDRAM_CS0CFG = + 0x13 + __builtin_ffs(0x08000000 >> 20) - 1; + /* let SDRAM CS1 start right after CS0 */ + *(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x08000000 + 0x0000001e; /* 2G */ +#endif + } + +#if 0 + /* find RAM size using SDRAM CS1 only */ + sdram_start(0); + get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000); + sdram_start(1); + get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000); + sdram_start(0); +#endif + /* set SDRAM CS1 size according to the amount of RAM found */ + + *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ + + init_ata_reset(); + return (dramsize); +} + +int checkboard(void) +{ + puts("Board: esd CPCI5200 (cpci5200)\n"); + return 0; +} + +void flash_preinit(void) +{ + /* + * Now, when we are in RAM, enable flash write + * access for detection process. + * Note that CS_BOOT cannot be cleared when + * executing in flash. + */ + *(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ +} + +void flash_afterinit(ulong size) +{ + if (size == 0x02000000) { + /* adjust mapping */ + *(vu_long *) MPC5XXX_BOOTCS_START = + *(vu_long *) MPC5XXX_CS0_START = + START_REG(CFG_BOOTCS_START | size); + *(vu_long *) MPC5XXX_BOOTCS_STOP = + *(vu_long *) MPC5XXX_CS0_STOP = + STOP_REG(CFG_BOOTCS_START | size, size); + } +} + +#ifdef CONFIG_PCI +static struct pci_controller hose; + +extern void pci_mpc5xxx_init(struct pci_controller *); + +void pci_init_board(void + ) { + pci_mpc5xxx_init(&hose); +} +#endif + +#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) + +#define GPIO_PSC1_4 0x01000000UL + +void init_ide_reset(void) +{ + debug("init_ide_reset\n"); + + /* Configure PSC1_4 as GPIO output for ATA reset */ + *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4; + *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4; +} + +void ide_set_reset(int idereset) +{ + debug("ide_reset(%d)\n", idereset); + + if (idereset) { + *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4; + } else { + *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; + } +} +#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ + +#define MPC5XXX_SIMPLEIO_GPIO_ENABLE (MPC5XXX_GPIO + 0x0004) +#define MPC5XXX_SIMPLEIO_GPIO_DIR (MPC5XXX_GPIO + 0x000C) +#define MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT (MPC5XXX_GPIO + 0x0010) +#define MPC5XXX_SIMPLEIO_GPIO_DATA_INPUT (MPC5XXX_GPIO + 0x0014) + +#define MPC5XXX_INTERRUPT_GPIO_ENABLE (MPC5XXX_GPIO + 0x0020) +#define MPC5XXX_INTERRUPT_GPIO_DIR (MPC5XXX_GPIO + 0x0028) +#define MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT (MPC5XXX_GPIO + 0x002C) +#define MPC5XXX_INTERRUPT_GPIO_STATUS (MPC5XXX_GPIO + 0x003C) + +#define GPIO_WU6 0x40000000UL +#define GPIO_USB0 0x00010000UL +#define GPIO_USB9 0x08000000UL +#define GPIO_USB9S 0x00080000UL + +void init_ata_reset(void) +{ + debug("init_ata_reset\n"); + + /* Configure GPIO_WU6 as GPIO output for ATA reset */ + *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6; + *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6; + *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6; + __asm__ volatile ("sync"); + + *(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT &= ~GPIO_USB0; + *(vu_long *) MPC5XXX_SIMPLEIO_GPIO_ENABLE |= GPIO_USB0; + *(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DIR |= GPIO_USB0; + __asm__ volatile ("sync"); + + *(vu_long *) MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT &= ~GPIO_USB9; + *(vu_long *) MPC5XXX_INTERRUPT_GPIO_ENABLE &= ~GPIO_USB9; + __asm__ volatile ("sync"); + + if ((*(vu_long *) MPC5XXX_INTERRUPT_GPIO_STATUS & GPIO_USB9S) == 0) { + *(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |= GPIO_USB0; + __asm__ volatile ("sync"); + } +} + +int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + unsigned int addr; + unsigned int size; + int i; + volatile unsigned long *ptr; + + addr = simple_strtol(argv[1], NULL, 16); + size = simple_strtol(argv[2], NULL, 16); + + printf("\nWriting at addr %08x, size %08x.\n", addr, size); + + while (1) { + ptr = (volatile unsigned long *)addr; + for (i = 0; i < (size >> 2); i++) { + *ptr++ = i; + } + + /* Abort if ctrl-c was pressed */ + if (ctrlc()) { + puts("\nAbort\n"); + return 0; + } + putc('.'); + } + return 0; +} + +U_BOOT_CMD(writepci, 3, 1, do_writepci, + "writepci- Write some data to pcibus\n", + "<addr> <size>\n" " - Write some data to pcibus.\n"); |