summaryrefslogtreecommitdiff
path: root/board/esd/cpci405
diff options
context:
space:
mode:
Diffstat (limited to 'board/esd/cpci405')
-rw-r--r--board/esd/cpci405/config.mk16
-rw-r--r--board/esd/cpci405/cpci405.c77
-rw-r--r--board/esd/cpci405/flash.c2
-rw-r--r--board/esd/cpci405/u-boot.lds16
4 files changed, 31 insertions, 80 deletions
diff --git a/board/esd/cpci405/config.mk b/board/esd/cpci405/config.mk
index 0be45c7..1bdf5e4 100644
--- a/board/esd/cpci405/config.mk
+++ b/board/esd/cpci405/config.mk
@@ -21,20 +21,4 @@
# MA 02111-1307 USA
#
-#
-# esd CPCI405 boards
-#
-
-ifeq ($(BOARD_REVISION),CPCI4052)
-TEXT_BASE = 0xFFFC0000
-else
-ifeq ($(BOARD_REVISION),CPCI405DT)
-TEXT_BASE = 0xFFFC0000
-else
-ifeq ($(BOARD_REVISION),CPCI405AB)
TEXT_BASE = 0xFFFC0000
-else
-TEXT_BASE = 0xFFFD0000
-endif
-endif
-endif
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index b856705..c5ccb34 100644
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405.c
@@ -110,8 +110,8 @@ int board_early_init_f (void)
* First pull fpga-prg pin low, to disable fpga logic (on version 2 board)
*/
out32(GPIO0_ODR, 0x00000000); /* no open drain pins */
- out32(GPIO0_TCR, CFG_FPGA_PRG); /* setup for output */
- out32(GPIO0_OR, CFG_FPGA_PRG); /* set output pins to high */
+ out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG); /* setup for output */
+ out32(GPIO0_OR, CONFIG_SYS_FPGA_PRG); /* set output pins to high */
out32(GPIO0_OR, 0); /* pull prg low */
/*
@@ -255,11 +255,6 @@ int cpci405_version(void)
}
}
-int misc_init_f (void)
-{
- return 0; /* dummy implementation */
-}
-
int misc_init_r (void)
{
unsigned long cntrl0Reg;
@@ -287,8 +282,8 @@ int misc_init_r (void)
cntrl0Reg = mfdcr(cntrl0);
mtdcr(cntrl0, cntrl0Reg | 0x00300000);
- dst = malloc(CFG_FPGA_MAX_SIZE);
- if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+ dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+ if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
printf ("GUNZIP ERROR - must RESET board to recover\n");
do_reset (NULL, 0, 0, NULL);
}
@@ -352,13 +347,13 @@ int misc_init_r (void)
#ifdef CONFIG_CPCI405_6U
if (cpci405_version() == 3) {
- volatile unsigned short *fpga_mode = (unsigned short *)CFG_FPGA_BASE_ADDR;
- volatile unsigned char *leds = (unsigned char *)CFG_LED_ADDR;
+ volatile unsigned short *fpga_mode = (unsigned short *)CONFIG_SYS_FPGA_BASE_ADDR;
+ volatile unsigned char *leds = (unsigned char *)CONFIG_SYS_LED_ADDR;
/*
* Enable outputs in fpga on version 3 board
*/
- *fpga_mode |= CFG_FPGA_MODE_ENABLE_OUTPUT;
+ *fpga_mode |= CONFIG_SYS_FPGA_MODE_ENABLE_OUTPUT;
/*
* Set outputs to 0
@@ -368,9 +363,9 @@ int misc_init_r (void)
/*
* Reset external DUART
*/
- *fpga_mode |= CFG_FPGA_MODE_DUART_RESET;
+ *fpga_mode |= CONFIG_SYS_FPGA_MODE_DUART_RESET;
udelay(100);
- *fpga_mode &= ~(CFG_FPGA_MODE_DUART_RESET);
+ *fpga_mode &= ~(CONFIG_SYS_FPGA_MODE_DUART_RESET);
}
#endif
}
@@ -450,9 +445,9 @@ int checkboard (void)
#if 0 /* test-only */
if (ver >= 2) {
- volatile u16 *fpga_status = (u16 *)CFG_FPGA_BASE_ADDR + 1;
+ volatile u16 *fpga_status = (u16 *)CONFIG_SYS_FPGA_BASE_ADDR + 1;
- if (*fpga_status & CFG_FPGA_STATUS_FLASH) {
+ if (*fpga_status & CONFIG_SYS_FPGA_STATUS_FLASH) {
puts ("FLASH Bank B, ");
} else {
puts ("FLASH Bank A, ");
@@ -493,18 +488,6 @@ int checkboard (void)
return 0;
}
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
- unsigned long val;
-
- mtdcr(memcfga, mem_mb0cf);
- val = mfdcr(memcfgd);
-
- return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-
void reset_phy(void)
{
#ifdef CONFIG_LXT971_NO_SLEEP
@@ -516,22 +499,20 @@ void reset_phy(void)
#endif
}
-/* ------------------------------------------------------------------------- */
-
#ifdef CONFIG_CPCI405_VER2
#ifdef CONFIG_IDE_RESET
void ide_set_reset(int on)
{
- volatile unsigned short *fpga_mode = (unsigned short *)CFG_FPGA_BASE_ADDR;
+ volatile unsigned short *fpga_mode = (unsigned short *)CONFIG_SYS_FPGA_BASE_ADDR;
/*
* Assert or deassert CompactFlash Reset Pin
*/
if (on) { /* assert RESET */
- *fpga_mode &= ~(CFG_FPGA_MODE_CF_RESET);
+ *fpga_mode &= ~(CONFIG_SYS_FPGA_MODE_CF_RESET);
} else { /* release RESET */
- *fpga_mode |= CFG_FPGA_MODE_CF_RESET;
+ *fpga_mode |= CONFIG_SYS_FPGA_MODE_CF_RESET;
}
}
@@ -574,12 +555,12 @@ int pci_pre_init(struct pci_controller *hose)
#ifdef CONFIG_CPCI405AB
-#define ONE_WIRE_CLEAR (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
- |= CFG_FPGA_MODE_1WIRE_DIR)
-#define ONE_WIRE_SET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
- &= ~CFG_FPGA_MODE_1WIRE_DIR)
-#define ONE_WIRE_GET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_STATUS) \
- & CFG_FPGA_MODE_1WIRE)
+#define ONE_WIRE_CLEAR (*(volatile unsigned short *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_MODE) \
+ |= CONFIG_SYS_FPGA_MODE_1WIRE_DIR)
+#define ONE_WIRE_SET (*(volatile unsigned short *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_MODE) \
+ &= ~CONFIG_SYS_FPGA_MODE_1WIRE_DIR)
+#define ONE_WIRE_GET (*(volatile unsigned short *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_STATUS) \
+ & CONFIG_SYS_FPGA_MODE_1WIRE)
/*
* Generate a 1-wire reset, return 1 if no presence detect was found,
@@ -709,8 +690,8 @@ U_BOOT_CMD(
NULL
);
-#define CFG_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT28WC32 */
-#define CFG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT28WC32 */
+#define CONFIG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars*/
/*
* Write backplane ip-address...
@@ -724,11 +705,11 @@ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
char *ptr;
IPaddr_t ipaddr;
- buf = malloc(CFG_ENV_SIZE_2);
- if (eeprom_read(CFG_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CFG_ENV_SIZE_2)) {
+ buf = malloc(CONFIG_ENV_SIZE_2);
+ if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CONFIG_ENV_SIZE_2)) {
puts("\nError reading backplane EEPROM!\n");
} else {
- crc = crc32(0, (uchar *)(buf+4), CFG_ENV_SIZE_2-4);
+ crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2-4);
if (crc != *(ulong *)buf) {
printf("ERROR: crc mismatch %08lx %08lx\n", crc, *(ulong *)buf);
return -1;
@@ -783,14 +764,14 @@ int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
printf("Setting bp_ip to %s\n", argv[1]);
- buf = malloc(CFG_ENV_SIZE_2);
- memset(buf, 0, CFG_ENV_SIZE_2);
+ buf = malloc(CONFIG_ENV_SIZE_2);
+ memset(buf, 0, CONFIG_ENV_SIZE_2);
sprintf(str, "bp_ip=%s", argv[1]);
strcpy(buf+4, str);
- crc = crc32(0, (uchar *)(buf+4), CFG_ENV_SIZE_2-4);
+ crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2-4);
*(ulong *)buf = crc;
- if (eeprom_write(CFG_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CFG_ENV_SIZE_2)) {
+ if (eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CONFIG_ENV_SIZE_2)) {
puts("\nError writing backplane EEPROM!\n");
}
diff --git a/board/esd/cpci405/flash.c b/board/esd/cpci405/flash.c
index e766895..d535924 100644
--- a/board/esd/cpci405/flash.c
+++ b/board/esd/cpci405/flash.c
@@ -66,7 +66,7 @@ unsigned long flash_init (void)
unsigned long base_b0, base_b1;
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
diff --git a/board/esd/cpci405/u-boot.lds b/board/esd/cpci405/u-boot.lds
index 21547ac..5d59761 100644
--- a/board/esd/cpci405/u-boot.lds
+++ b/board/esd/cpci405/u-boot.lds
@@ -57,22 +57,7 @@ SECTIONS
.plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
cpu/ppc4xx/start.o (.text)
- cpu/ppc4xx/traps.o (.text)
- cpu/ppc4xx/interrupts.o (.text)
- cpu/ppc4xx/4xx_uart.o (.text)
- cpu/ppc4xx/cpu_init.o (.text)
- cpu/ppc4xx/speed.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
-
-/* . = env_offset;*/
-/* common/environment.o(.text)*/
*(.text)
*(.fixup)
@@ -143,6 +128,7 @@ SECTIONS
*(.dynbss)
*(.bss)
*(COMMON)
+ . = ALIGN(4);
}
_end = . ;
PROVIDE (end = .);