diff options
Diffstat (limited to 'board/esd/cpci2dp/cpci2dp.c')
| -rw-r--r-- | board/esd/cpci2dp/cpci2dp.c | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c new file mode 100644 index 0000000..0949a7d --- /dev/null +++ b/board/esd/cpci2dp/cpci2dp.c @@ -0,0 +1,215 @@ +/* + * (C) Copyright 2005 + * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <command.h> +#include <malloc.h> + +int board_early_init_f (void) +{ + unsigned long cntrl0Reg; + + /* + * Setup GPIO pins (CS4 as GPIO) + */ + cntrl0Reg = mfdcr(cntrl0); + mtdcr(cntrl0, cntrl0Reg | 0x00800000); + + out32(GPIO0_OR, CFG_INTA_FAKE | CFG_EEPROM_WP); /* set output pins to high */ + out32(GPIO0_ODR, CFG_INTA_FAKE); /* INTA# is open drain */ + out32(GPIO0_TCR, CFG_INTA_FAKE | CFG_EEPROM_WP); /* setup for output */ + + /* + * IRQ 0-15 405GP internally generated; active high; level sensitive + * IRQ 16 405GP internally generated; active low; level sensitive + * IRQ 17-24 RESERVED + * IRQ 25 (EXT IRQ 0) PB0; active low; level sensitive + * IRQ 26 (EXT IRQ 1) PB1; active low; level sensitive + * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive + * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive + * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive + * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive + * IRQ 31 (EXT IRQ 6) unused + */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicer, 0x00000000); /* disable all ints */ + mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ + mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ + + mtdcr(uictr, 0x10000000); /* set int trigger levels */ + mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + + return 0; +} + + +int misc_init_f (void) +{ + return 0; /* dummy implementation */ +} + + +int misc_init_r (void) +{ + DECLARE_GLOBAL_DATA_PTR; + unsigned long cntrl0Reg; + + /* adjust flash start and offset */ + gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + gd->bd->bi_flashoffset = 0; + + /* + * Select cts (and not dsr) on uart1 + */ + cntrl0Reg = mfdcr(cntrl0); + mtdcr(cntrl0, cntrl0Reg | 0x00001000); + + return (0); +} + + +/* + * Check Board Identity: + */ +int checkboard (void) +{ + unsigned char str[64]; + int i = getenv_r ("serial#", str, sizeof(str)); + + puts ("Board: "); + + if (i == -1) { + puts ("### No HW ID - assuming CPCI2DP"); + } else { + puts(str); + } + + printf(" (Ver 1.0)"); + + putc ('\n'); + + return 0; +} + +/* ------------------------------------------------------------------------- */ + +long int initdram (int board_type) +{ + unsigned long val; + + mtdcr(memcfga, mem_mb0cf); + val = mfdcr(memcfgd); + + return (4*1024*1024 << ((val & 0x000e0000) >> 17)); +} + +/* ------------------------------------------------------------------------- */ + +int testdram (void) +{ + /* TODO: XXX XXX XXX */ + printf ("test: 64 MB - ok\n"); + + return (0); +} + +/* ------------------------------------------------------------------------- */ + +#if defined(CFG_EEPROM_WREN) +/* Input: <dev_addr> I2C address of EEPROM device to enable. + * <state> -1: deliver current state + * 0: disable write + * 1: enable write + * Returns: -1: wrong device address + * 0: dis-/en- able done + * 0/1: current state if <state> was -1. + */ +int eeprom_write_enable (unsigned dev_addr, int state) { + if (CFG_I2C_EEPROM_ADDR != dev_addr) { + return -1; + } + else { + switch (state) { + case 1: + /* Enable write access, clear bit GPIO_SINT2. */ + out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP); + state = 0; + break; + case 0: + /* Disable write access, set bit GPIO_SINT2. */ + out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); + state = 0; + break; + default: + /* Read current status back. */ + state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP)); + break; + } + } + return state; +} +#endif + +#if defined(CFG_EEPROM_WREN) +int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int query = argc == 1; + int state = 0; + + if (query) { + /* Query write access state. */ + state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1); + if (state < 0) { + puts ("Query of write access state failed.\n"); + } + else { + printf ("Write access for device 0x%0x is %sabled.\n", + CFG_I2C_EEPROM_ADDR, state ? "en" : "dis"); + state = 0; + } + } + else { + if ('0' == argv[1][0]) { + /* Disable write access. */ + state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0); + } + else { + /* Enable write access. */ + state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1); + } + if (state < 0) { + puts ("Setup of write access state failed.\n"); + } + } + + return state; +} + +U_BOOT_CMD( + eepwren, 2, 0, do_eep_wren, + "eepwren - Enable / disable / query EEPROM write access\n", + NULL + ); +#endif /* #if defined(CFG_EEPROM_WREN) */ |