summaryrefslogtreecommitdiff
path: root/board/esd/cpci2dp/cpci2dp.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/esd/cpci2dp/cpci2dp.c')
-rw-r--r--board/esd/cpci2dp/cpci2dp.c215
1 files changed, 215 insertions, 0 deletions
diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
new file mode 100644
index 0000000..0949a7d
--- /dev/null
+++ b/board/esd/cpci2dp/cpci2dp.c
@@ -0,0 +1,215 @@
+/*
+ * (C) Copyright 2005
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <malloc.h>
+
+int board_early_init_f (void)
+{
+ unsigned long cntrl0Reg;
+
+ /*
+ * Setup GPIO pins (CS4 as GPIO)
+ */
+ cntrl0Reg = mfdcr(cntrl0);
+ mtdcr(cntrl0, cntrl0Reg | 0x00800000);
+
+ out32(GPIO0_OR, CFG_INTA_FAKE | CFG_EEPROM_WP); /* set output pins to high */
+ out32(GPIO0_ODR, CFG_INTA_FAKE); /* INTA# is open drain */
+ out32(GPIO0_TCR, CFG_INTA_FAKE | CFG_EEPROM_WP); /* setup for output */
+
+ /*
+ * IRQ 0-15 405GP internally generated; active high; level sensitive
+ * IRQ 16 405GP internally generated; active low; level sensitive
+ * IRQ 17-24 RESERVED
+ * IRQ 25 (EXT IRQ 0) PB0; active low; level sensitive
+ * IRQ 26 (EXT IRQ 1) PB1; active low; level sensitive
+ * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
+ * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
+ * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
+ * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
+ * IRQ 31 (EXT IRQ 6) unused
+ */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
+ mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
+
+ mtdcr(uictr, 0x10000000); /* set int trigger levels */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ return 0;
+}
+
+
+int misc_init_f (void)
+{
+ return 0; /* dummy implementation */
+}
+
+
+int misc_init_r (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned long cntrl0Reg;
+
+ /* adjust flash start and offset */
+ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+ gd->bd->bi_flashoffset = 0;
+
+ /*
+ * Select cts (and not dsr) on uart1
+ */
+ cntrl0Reg = mfdcr(cntrl0);
+ mtdcr(cntrl0, cntrl0Reg | 0x00001000);
+
+ return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+int checkboard (void)
+{
+ unsigned char str[64];
+ int i = getenv_r ("serial#", str, sizeof(str));
+
+ puts ("Board: ");
+
+ if (i == -1) {
+ puts ("### No HW ID - assuming CPCI2DP");
+ } else {
+ puts(str);
+ }
+
+ printf(" (Ver 1.0)");
+
+ putc ('\n');
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ unsigned long val;
+
+ mtdcr(memcfga, mem_mb0cf);
+ val = mfdcr(memcfgd);
+
+ return (4*1024*1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+ /* TODO: XXX XXX XXX */
+ printf ("test: 64 MB - ok\n");
+
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if defined(CFG_EEPROM_WREN)
+/* Input: <dev_addr> I2C address of EEPROM device to enable.
+ * <state> -1: deliver current state
+ * 0: disable write
+ * 1: enable write
+ * Returns: -1: wrong device address
+ * 0: dis-/en- able done
+ * 0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable (unsigned dev_addr, int state) {
+ if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+ return -1;
+ }
+ else {
+ switch (state) {
+ case 1:
+ /* Enable write access, clear bit GPIO_SINT2. */
+ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP);
+ state = 0;
+ break;
+ case 0:
+ /* Disable write access, set bit GPIO_SINT2. */
+ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
+ state = 0;
+ break;
+ default:
+ /* Read current status back. */
+ state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP));
+ break;
+ }
+ }
+ return state;
+}
+#endif
+
+#if defined(CFG_EEPROM_WREN)
+int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int query = argc == 1;
+ int state = 0;
+
+ if (query) {
+ /* Query write access state. */
+ state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+ if (state < 0) {
+ puts ("Query of write access state failed.\n");
+ }
+ else {
+ printf ("Write access for device 0x%0x is %sabled.\n",
+ CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+ state = 0;
+ }
+ }
+ else {
+ if ('0' == argv[1][0]) {
+ /* Disable write access. */
+ state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+ }
+ else {
+ /* Enable write access. */
+ state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+ }
+ if (state < 0) {
+ puts ("Setup of write access state failed.\n");
+ }
+ }
+
+ return state;
+}
+
+U_BOOT_CMD(
+ eepwren, 2, 0, do_eep_wren,
+ "eepwren - Enable / disable / query EEPROM write access\n",
+ NULL
+ );
+#endif /* #if defined(CFG_EEPROM_WREN) */