summaryrefslogtreecommitdiff
path: root/board/esd/apc405/apc405.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/esd/apc405/apc405.c')
-rw-r--r--board/esd/apc405/apc405.c461
1 files changed, 0 insertions, 461 deletions
diff --git a/board/esd/apc405/apc405.c b/board/esd/apc405/apc405.c
deleted file mode 100644
index 5cc1d0d..0000000
--- a/board/esd/apc405/apc405.c
+++ /dev/null
@@ -1,461 +0,0 @@
-/*
- * (C) Copyright 2005-2008
- * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
- *
- * (C) Copyright 2001-2003
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <command.h>
-#include <malloc.h>
-#include <flash.h>
-#include <mtd/cfi_flash.h>
-#include <asm/4xx_pci.h>
-#include <pci.h>
-#include <usb.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef FPGA_DEBUG
-
-extern void lxt971_no_sleep(void);
-
-/* fpga configuration data - gzip compressed and generated by bin2c */
-const unsigned char fpgadata[] =
-{
-#include "fpgadata.c"
-};
-
-/*
- * include common fpga code (for esd boards)
- */
-#include "../common/fpga.c"
-
-#ifdef CONFIG_LCD_USED
-/* logo bitmap data - gzip compressed and generated by bin2c */
-unsigned char logo_bmp[] =
-{
-#include "logo_640_480_24bpp.c"
-};
-
-/*
- * include common lcd code (for esd boards)
- */
-#include "../common/lcd.c"
-#include "../common/s1d13505_640_480_16bpp.h"
-#include "../common/s1d13806_640_480_16bpp.h"
-#endif /* CONFIG_LCD_USED */
-
-/*
- * include common auto-update code (for esd boards)
- */
-#include "../common/auto_update.h"
-
-au_image_t au_image[] = {
- {"preinst.img", 0, -1, AU_SCRIPT},
- {"u-boot.img", 0xfff80000, 0x00080000, AU_FIRMWARE | AU_PROTECT},
- {"pImage", 0xfe000000, 0x00100000, AU_NOR | AU_PROTECT},
- {"pImage.initrd", 0xfe100000, 0x00400000, AU_NOR | AU_PROTECT},
- {"work.img", 0xfe500000, 0x01400000, AU_NOR},
- {"data.img", 0xff900000, 0x00580000, AU_NOR},
- {"logo.img", 0xffe80000, 0x00100000, AU_NOR | AU_PROTECT},
- {"postinst.img", 0, 0, AU_SCRIPT},
-};
-
-int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0]));
-
-int board_revision(void)
-{
- unsigned long CPC0_CR0Reg;
- unsigned long value;
-
- /*
- * Get version of APC405 board from GPIO's
- */
-
- /* Setup GPIO pins (CS2/GPIO11, CS3/GPIO12 and CS4/GPIO13 as GPIO) */
- CPC0_CR0Reg = mfdcr(CPC0_CR0);
- mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x03800000);
- out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x001c0000);
- out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x001c0000);
-
- /* wait some time before reading input */
- udelay(1000);
-
- /* get config bits */
- value = in_be32((void*)GPIO0_IR) & 0x001c0000;
- /*
- * Restore GPIO settings
- */
- mtdcr(CPC0_CR0, CPC0_CR0Reg);
-
- switch (value) {
- case 0x001c0000:
- /* CS2==1 && CS3==1 && CS4==1 -> version <= 1.2 */
- return 2;
- case 0x000c0000:
- /* CS2==0 && CS3==1 && CS4==1 -> version 1.3 */
- return 3;
- case 0x00180000:
- /* CS2==1 && CS3==1 && CS4==0 -> version 1.6 */
- return 6;
- case 0x00140000:
- /* CS2==1 && CS3==0 && CS4==1 -> version 1.8 */
- return 8;
- default:
- /* should not be reached! */
- return 0;
- }
-}
-
-int board_early_init_f (void)
-{
- /*
- * First pull fpga-prg pin low, to disable fpga logic
- */
- out_be32((void*)GPIO0_ODR, 0x00000000); /* no open drain pins */
- out_be32((void*)GPIO0_TCR, CONFIG_SYS_FPGA_PRG); /* setup for output */
- out_be32((void*)GPIO0_OR, 0); /* pull prg low */
-
- /*
- * IRQ 0-15 405GP internally generated; active high; level sensitive
- * IRQ 16 405GP internally generated; active low; level sensitive
- * IRQ 17-24 RESERVED
- * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
- * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
- * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
- * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
- * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
- * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
- * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
- */
- mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
- mtdcr(UIC0ER, 0x00000000); /* disable all ints */
- mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
- mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */
- mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
- mtdcr(UIC0VCR, 0x00000001); /* set vect base=0 */
- mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
-
- /*
- * EBC Configuration Register: set ready timeout to 512 ebc-clks
- */
- mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
-
- /*
- * New boards have a single 32MB flash connected to CS0
- * instead of two 16MB flashes on CS0+1.
- */
- if (board_revision() >= 8) {
- /* disable CS1 */
- mtebc(PB1AP, 0);
- mtebc(PB1CR, 0);
-
- /* resize CS0 to 32MB */
- mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP_HWREV8);
- mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR_HWREV8);
- }
-
- return 0;
-}
-
-int board_early_init_r(void)
-{
- if (gd->board_type >= 8)
- cfi_flash_num_flash_banks = 1;
-
- return 0;
-}
-
-#define FUJI_BASE 0xf0100200
-#define LCDBL_PWM 0xa0
-#define LCDBL_PWMMIN 0xa4
-#define LCDBL_PWMMAX 0xa8
-
-int misc_init_r(void)
-{
- u16 *fpga_mode = (u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
- u16 *fpga_ctrl2 =(u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL2);
- u8 *duart0_mcr = (u8 *)(DUART0_BA + 4);
- u8 *duart1_mcr = (u8 *)(DUART1_BA + 4);
- unsigned char *dst;
- ulong len = sizeof(fpgadata);
- int status;
- int index;
- int i;
- unsigned long CPC0_CR0Reg;
- char *str;
- uchar *logo_addr;
- ulong logo_size;
- ushort minb, maxb;
- int result;
-
- /*
- * Setup GPIO pins (CS6+CS7 as GPIO)
- */
- CPC0_CR0Reg = mfdcr(CPC0_CR0);
- mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00300000);
-
- dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
- if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
- printf("GUNZIP ERROR - must RESET board to recover\n");
- do_reset(NULL, 0, 0, NULL);
- }
-
- status = fpga_boot(dst, len);
- if (status != 0) {
- printf("\nFPGA: Booting failed ");
- switch (status) {
- case ERROR_FPGA_PRG_INIT_LOW:
- printf("(Timeout: "
- "INIT not low after asserting PROGRAM*)\n ");
- break;
- case ERROR_FPGA_PRG_INIT_HIGH:
- printf("(Timeout: "
- "INIT not high after deasserting PROGRAM*)\n ");
- break;
- case ERROR_FPGA_PRG_DONE:
- printf("(Timeout: "
- "DONE not high after programming FPGA)\n ");
- break;
- }
-
- /* display infos on fpgaimage */
- index = 15;
- for (i = 0; i < 4; i++) {
- len = dst[index];
- printf("FPGA: %s\n", &(dst[index+1]));
- index += len + 3;
- }
- putc('\n');
- /* delayed reboot */
- for (i = 20; i > 0; i--) {
- printf("Rebooting in %2d seconds \r",i);
- for (index = 0; index < 1000; index++)
- udelay(1000);
- }
- putc('\n');
- do_reset(NULL, 0, 0, NULL);
- }
-
- /* restore gpio/cs settings */
- mtdcr(CPC0_CR0, CPC0_CR0Reg);
-
- puts("FPGA: ");
-
- /* display infos on fpgaimage */
- index = 15;
- for (i = 0; i < 4; i++) {
- len = dst[index];
- printf("%s ", &(dst[index + 1]));
- index += len + 3;
- }
- putc('\n');
-
- free(dst);
-
- /*
- * Reset FPGA via FPGA_DATA pin
- */
- SET_FPGA(FPGA_PRG | FPGA_CLK);
- udelay(1000); /* wait 1ms */
- SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
- udelay(1000); /* wait 1ms */
-
- /*
- * Write board revision in FPGA
- */
- out_be16(fpga_ctrl2,
- (in_be16(fpga_ctrl2) & 0xfff0) | (gd->board_type & 0x000f));
-
- /*
- * Enable power on PS/2 interface (with reset)
- */
- out_be16(fpga_mode, in_be16(fpga_mode) | CONFIG_SYS_FPGA_CTRL_PS2_RESET);
- for (i=0;i<100;i++)
- udelay(1000);
- udelay(1000);
- out_be16(fpga_mode, in_be16(fpga_mode) & ~CONFIG_SYS_FPGA_CTRL_PS2_RESET);
-
- /*
- * Enable interrupts in exar duart mcr[3]
- */
- out_8(duart0_mcr, 0x08);
- out_8(duart1_mcr, 0x08);
-
- /*
- * Init lcd interface and display logo
- */
- str = getenv("splashimage");
- if (str) {
- logo_addr = (uchar *)simple_strtoul(str, NULL, 16);
- logo_size = CONFIG_SYS_VIDEO_LOGO_MAX_SIZE;
- } else {
- logo_addr = logo_bmp;
- logo_size = sizeof(logo_bmp);
- }
-
- if (gd->board_type >= 6) {
- result = lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
- (uchar *)CONFIG_SYS_LCD_BIG_MEM,
- regs_13505_640_480_16bpp,
- sizeof(regs_13505_640_480_16bpp) /
- sizeof(regs_13505_640_480_16bpp[0]),
- logo_addr, logo_size);
- if (result && str) {
- /* retry with internal image */
- logo_addr = logo_bmp;
- logo_size = sizeof(logo_bmp);
- lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
- (uchar *)CONFIG_SYS_LCD_BIG_MEM,
- regs_13505_640_480_16bpp,
- sizeof(regs_13505_640_480_16bpp) /
- sizeof(regs_13505_640_480_16bpp[0]),
- logo_addr, logo_size);
- }
- } else {
- result = lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
- (uchar *)CONFIG_SYS_LCD_BIG_MEM,
- regs_13806_640_480_16bpp,
- sizeof(regs_13806_640_480_16bpp) /
- sizeof(regs_13806_640_480_16bpp[0]),
- logo_addr, logo_size);
- if (result && str) {
- /* retry with internal image */
- logo_addr = logo_bmp;
- logo_size = sizeof(logo_bmp);
- lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
- (uchar *)CONFIG_SYS_LCD_BIG_MEM,
- regs_13806_640_480_16bpp,
- sizeof(regs_13806_640_480_16bpp) /
- sizeof(regs_13806_640_480_16bpp[0]),
- logo_addr, logo_size);
- }
- }
-
- /*
- * Reset microcontroller and setup backlight PWM controller
- */
- out_be16(fpga_mode, in_be16(fpga_mode) | 0x0014);
- for (i=0;i<10;i++)
- udelay(1000);
- out_be16(fpga_mode, in_be16(fpga_mode) | 0x001c);
-
- minb = 0;
- maxb = 0xff;
- str = getenv("lcdbl");
- if (str) {
- minb = (ushort)simple_strtoul(str, &str, 16) & 0x00ff;
- if (str && (*str=',')) {
- str++;
- maxb = (ushort)simple_strtoul(str, NULL, 16) & 0x00ff;
- } else
- minb = 0;
-
- out_be16((u16 *)(FUJI_BASE + LCDBL_PWMMIN), minb);
- out_be16((u16 *)(FUJI_BASE + LCDBL_PWMMAX), maxb);
-
- printf("LCDBL: min=0x%02x, max=0x%02x\n", minb, maxb);
- }
- out_be16((u16 *)(FUJI_BASE + LCDBL_PWM), 0xff);
-
- /*
- * fix environment for field updated units
- */
- if (getenv("altbootcmd") == NULL) {
- setenv("usb_load", CONFIG_SYS_USB_LOAD_COMMAND);
- setenv("usbargs", CONFIG_SYS_USB_ARGS);
- setenv("bootcmd", CONFIG_BOOTCOMMAND);
- setenv("usb_self", CONFIG_SYS_USB_SELF_COMMAND);
- setenv("bootlimit", CONFIG_SYS_BOOTLIMIT);
- setenv("altbootcmd", CONFIG_SYS_ALT_BOOTCOMMAND);
- saveenv();
- }
-
- return (0);
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard (void)
-{
- char str[64];
- int i = getenv_f("serial#", str, sizeof(str));
-
- puts ("Board: ");
-
- if (i == -1) {
- puts ("### No HW ID - assuming APC405");
- } else {
- puts(str);
- }
-
- gd->board_type = board_revision();
- printf(", Rev. 1.%ld\n", gd->board_type);
-
- return 0;
-}
-
-#ifdef CONFIG_IDE_RESET
-void ide_set_reset(int on)
-{
- u16 *fpga_mode = (u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
-
- /*
- * Assert or deassert CompactFlash Reset Pin
- */
- if (on) {
- out_be16(fpga_mode,
- in_be16(fpga_mode) & ~CONFIG_SYS_FPGA_CTRL_CF_RESET);
- } else {
- out_be16(fpga_mode,
- in_be16(fpga_mode) | CONFIG_SYS_FPGA_CTRL_CF_RESET);
- }
-}
-#endif /* CONFIG_IDE_RESET */
-
-void reset_phy(void)
-{
- /*
- * Disable sleep mode in LXT971
- */
- lxt971_no_sleep();
-}
-
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
-int board_usb_init(int index, enum usb_init_type init)
-{
- return 0;
-}
-
-int usb_board_stop(void)
-{
- unsigned short tmp;
- int i;
-
- /*
- * reset PCI bus
- * This is required to make some very old Linux OHCI driver
- * work after U-Boot has used the OHCI controller.
- */
- pci_read_config_word(PCIDEVID_405GP, PCIBRDGOPT2, &tmp);
- pci_write_config_word(PCIDEVID_405GP, PCIBRDGOPT2, (tmp | 0x1000));
-
- for (i = 0; i < 100; i++)
- udelay(1000);
-
- pci_write_config_word(PCIDEVID_405GP, PCIBRDGOPT2, tmp);
- return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
- return usb_board_stop();
-}
-#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */
generated by cgit v1.1 at 2024-12-30 23:14:38 +0000