diff options
Diffstat (limited to 'board/eltec')
| -rw-r--r-- | board/eltec/bab7xx/Makefile | 46 | ||||
| -rw-r--r-- | board/eltec/bab7xx/asm_init.S | 1476 | ||||
| -rw-r--r-- | board/eltec/bab7xx/bab7xx.c | 253 | ||||
| -rw-r--r-- | board/eltec/bab7xx/dc_srom.c | 291 | ||||
| -rw-r--r-- | board/eltec/bab7xx/el_srom.c | 292 | ||||
| -rw-r--r-- | board/eltec/bab7xx/flash.c | 512 | ||||
| -rw-r--r-- | board/eltec/bab7xx/l2cache.c | 159 | ||||
| -rw-r--r-- | board/eltec/bab7xx/misc.c | 546 | ||||
| -rw-r--r-- | board/eltec/bab7xx/pci.c | 120 | ||||
| -rw-r--r-- | board/eltec/bab7xx/srom.h | 102 |
10 files changed, 0 insertions, 3797 deletions
diff --git a/board/eltec/bab7xx/Makefile b/board/eltec/bab7xx/Makefile deleted file mode 100644 index 9606ddc..0000000 --- a/board/eltec/bab7xx/Makefile +++ /dev/null @@ -1,46 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS = $(BOARD).o flash.o pci.o misc.o el_srom.o dc_srom.o l2cache.o - -SOBJS = asm_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/eltec/bab7xx/asm_init.S b/board/eltec/bab7xx/asm_init.S deleted file mode 100644 index a85fb8b..0000000 --- a/board/eltec/bab7xx/asm_init.S +++ /dev/null @@ -1,1476 +0,0 @@ -/* - * (C) Copyright 2001 ELTEC Elektronik AG - * Frank Gottschling <fgottschling@eltec.de> - * - * ELTEC BAB PPC RAM initialization - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/processor.h> -#include <74xx_7xx.h> -#include <mpc106.h> -#include <version.h> - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> - -/* - * This following contains the entry code for the initialization code - * for the MPC 106, a PCI Bridge/Memory Controller. - * Register usage: - * r0 = ramtest scratch register, toggleError loop counter - * r1 = 0xfec0 0cf8 CONFIG_ADDRESS - * r2 = 0xfee0 0cfc CONFIG_DATA - * r3 = scratch register, subroutine argument and return value, ramtest size - * r4 = scratch register, spdRead clock mask, OutHex loop count - * r5 = ramtest scratch register - * r6 = toggleError 1st value, spdRead port mask - * r7 = toggleError 2nd value, ramtest scratch register, - * spdRead scratch register (0x00) - * r8 = ramtest scratch register, spdRead scratch register (0x80) - * r9 = ramtest scratch register, toggleError loop end, OutHex digit - * r10 = ramtest scratch register, spdWriteByte parameter, - * spdReadByte return value, printf pointer to COM1 - * r11 = startType - * r12 = ramtest scratch register, spdRead data mask - * r13 = pointer to message block - * r14 = pointer to GOT - * r15 = scratch register, SPD save - * r16 = bank0 size, total memory size - * r17 = bank1 size - * r18 = bank2 size - * r19 = bank3 size - * r20 = MCCR1, MSAR1 - * r21 = MCCR3, MEAR1 - * r22 = MCCR4, MBER - * r23 = EMSAR1 - * r24 = EMEAR1 - * r25 = save link register 1st level - * r26 = save link register 2nd level - * r27 = save link register 3rd level - * r30 = pointer to GPIO for spdRead - */ - - -.globl board_asm_init -board_asm_init: -/* - * setup pointer to message block - */ - mflr r25 /* save away link register */ - bl get_lnk_reg /* r3=addr of next instruction */ - subi r4, r3, 8 /* r4=board_asm_init addr */ - addi r13, r4, (MessageBlock-board_asm_init) -/* - * dcache_disable - */ - mfspr r3, HID0 - li r4, HID0_DCE - andc r3, r3, r4 - mr r2, r3 - ori r3, r3, HID0_DCI - sync - mtspr HID0, r3 - mtspr HID0, r2 - isync - sync -/* - * icache_disable - */ - mfspr r3, HID0 - li r4, 0 - ori r4, r4, HID0_ICE - andc r3, r3, r4 - sync - mtspr HID0, r3 -/* - * invalidate caches - */ - ori r3, r3, (HID0_ICE | HID0_ICFI | HID0_DCI | HID0_DCE) - or r4, r4, r3 - isync - mtspr HID0, r4 - andc r4, r4, r3 - isync - mtspr HID0, r4 - isync -/* - * icache_enable - */ - mfspr r3, HID0 - ori r3, r3, (HID0_ICE | HID0_ICFI) - sync - mtspr HID0, r3 - - lis r1, 0xfec0 - ori r1, r1, 0x0cf8 - lis r2, 0xfee0 - ori r2, r2, 0xcfc - -#ifdef CONFIG_SYS_ADDRESS_MAP_A -/* - * Switch to address map A if necessary. - */ - lis r3, MPC106_REG@h - ori r3, r3, PCI_PICR1 - stwbrx r3, 0, r1 - sync - lwbrx r4, 0, r2 - sync - lis r0, PICR1_XIO_MODE@h - ori r0, r0, PICR1_XIO_MODE@l - andc r4, r4, r0 - lis r0, PICR1_ADDRESS_MAP@h - ori r0, r0, PICR1_ADDRESS_MAP@l - or r4, r4, r0 - stwbrx r4, 0, r2 - sync -#endif - -/* - * Do the init for the SIO. - */ - bl .sioInit - - addi r3, r13, (MinitLogo-MessageBlock) - bl Printf - - addi r3, r13, (Mspd01-MessageBlock) - bl Printf -/* - * Memory cofiguration using SPD information stored on the SODIMMs - */ - li r17, 0 - li r18, 0 - li r19, 0 - - li r3, 0x0002 /* get RAM type from spd for bank0/1 */ - bl spdRead - - cmpi 0, 0, r3, -1 /* error ? */ - bne noSpdError - - addi r3, r13, (Mfail-MessageBlock) - bl Printf - - li r6, 0xe0 /* error codes in r6 and r7 */ - li r7, 0x00 - b toggleError /* fail - loop forever */ - -noSpdError: - mr r15, r3 /* save r3 */ - - addi r3, r13, (Mok-MessageBlock) - bl Printf - - cmpli 0, 0, r15, 0x0001 /* FPM ? */ - beq configFPM - cmpli 0, 0, r15, 0x0002 /* EDO ? */ - beq configEDO - cmpli 0, 0, r15, 0x0004 /* SDRAM ? */ - beq configSDRAM - - li r6, 0xe0 /* error codes in r6 and r7 */ - li r7, 0x01 - b toggleError /* fail - loop forever */ - -configSDRAM: - addi r3, r13, (MsdRam-MessageBlock) - bl Printf -/* - * set the Memory Configuration Reg. 1 - */ - li r3, 0x001f /* get bank size from spd bank0/1 */ - bl spdRead - - andi. r3, r3, 0x0038 - beq SD16MB2B - - li r3, 0x0011 /* get number of internal banks */ - /* from spd for bank0/1 */ - bl spdRead - - cmpli 0, 0, r3, 0x02 - beq SD64MB2B - - cmpli 0, 0, r3, 0x04 - beq SD64MB4B - - li r6, 0xe0 /* error codes in r6 and r7 */ - li r7, 0x02 - b toggleError /* fail - loop forever */ - -SD64MB2B: - li r20, 0x0005 /* 64-Mbit SDRAM 2 banks */ - b SDRow2nd - -SD64MB4B: - li r20, 0x0000 /* 64-Mbit SDRAM 4 banks */ - b SDRow2nd - -SD16MB2B: - li r20, 0x000f /* 16-Mbit SDRAM 2 banks */ - -SDRow2nd: - li r3, 0x0102 /* get RAM type spd for bank2/3 */ - bl spdRead - - cmpli 0, 0, r3, 0x0004 - bne S2D64MB4B /* bank2/3 isn't present or no SDRAM */ - - li r3, 0x011f /* get bank size from spd bank2/3 */ - bl spdRead - - andi. r3, r3, 0x0038 - beq S2D16MB2B -/* - * set the Memory Configuration Reg. 2 - */ - li r3, 0x0111 /* get number of internal banks */ - /* from spd for bank2/3 */ - bl spdRead - - cmpli 0, 0, r3, 0x02 - beq S2D64MB2B - - cmpli 0, 0, r3, 0x04 - beq S2D64MB4B - - li r6, 0xe0 /* error codes in r6 and r7 */ - li r7, 0x03 - b toggleError /* fail - loop forever */ - -S2D64MB2B: - ori r20, r20, 0x0050 /* 64-Mbit SDRAM 2 banks */ - b S2D64MB4B - -S2D16MB2B: - ori r20, r20, 0x00f0 /* 16-Mbit SDRAM 2 banks */ - -/* - * set the Memory Configuration Reg. 3 - */ -S2D64MB4B: - lis r21, 0x8630 /* BSTOPRE = 0x80, REFREC = 6, */ - /* RDLAT = 3 */ - -/* - * set the Memory Configuration Reg. 4 - */ - lis r22, 0x2430 /* PRETOACT = 2, ACTOPRE = 4, */ - /* WCBUF = 1, RCBUF = 1 */ - ori r22, r22, 0x2220 /* SDMODE = 0x022, ACTORW = 2 */ - -/* - * get the size of bank 0-3 - */ - li r3, 0x001f /* get bank size from spd bank0/1 */ - bl spdRead - - rlwinm r16, r3, 2, 24, 29 /* calculate size in MByte */ - /* (128 MB max.) */ - - li r3, 0x0005 /* get number of banks from spd */ - /* for bank0/1 */ - bl spdRead - - cmpi 0, 0, r3, 2 /* 2 banks ? */ - bne SDRAMnobank1 - - mr r17, r16 - -SDRAMnobank1: - addi r3, r13, (Mspd23-MessageBlock) - bl Printf - - li r3, 0x0102 /* get RAM type spd for bank2/3 */ - bl spdRead - - cmpli 0, 0, r3, 0x0001 /* FPM ? */ - bne noFPM23 /* handle as EDO */ - addi r3, r13, (Mok-MessageBlock) - bl Printf - addi r3, r13, (MfpmRam-MessageBlock) - bl Printf - b configRAMcommon -noFPM23: - cmpli 0, 0, r3, 0x0002 /* EDO ? */ - bne noEDO23 - addi r3, r13, (Mok-MessageBlock) - bl Printf - addi r3, r13, (MedoRam-MessageBlock) - bl Printf - b configRAMcommon -noEDO23: - cmpli 0, 0, r3, 0x0004 /* SDRAM ? */ - bne noSDRAM23 - addi r3, r13, (Mok-MessageBlock) - bl Printf - addi r3, r13, (MsdRam-MessageBlock) - bl Printf - b configSDRAM23 -noSDRAM23: - addi r3, r13, (Mna-MessageBlock) - bl Printf - b configRAMcommon /* bank2/3 isn't present or no SDRAM */ - -configSDRAM23: - li r3, 0x011f /* get bank size from spd bank2/3 */ - bl spdRead - - rlwinm r18, r3, 2, 24, 29 /* calculate size in MByte */ - /* (128 MB max.) */ - - li r3, 0x0105 /* get number of banks from */ - /* spd bank0/1 */ - bl spdRead - - cmpi 0, 0, r3, 2 /* 2 banks ? */ - bne SDRAMnobank3 - - mr r19, r18 - -SDRAMnobank3: - b configRAMcommon - -configFPM: - addi r3, r13, (MfpmRam-MessageBlock) - bl Printf - b configEDO0 -/* - * set the Memory Configuration Reg. 1 - */ -configEDO: - addi r3, r13, (MedoRam-MessageBlock) - bl Printf -configEDO0: - lis r20, MCCR1_TYPE_EDO@h - -getSpdRowBank01: - li r3, 0x0003 /* get number of row bits from */ - /* spd from bank0/1 */ - bl spdRead - ori r20, r20, (MCCR1_BK0_9BITS | MCCR1_BK1_9BITS) - cmpli 0, 0, r3, 0x0009 /* bank0 - 9 row bits */ - beq getSpdRowBank23 - - ori r20, r20, (MCCR1_BK0_10BITS | MCCR1_BK1_10BITS) - cmpli 0, 0, r3, 0x000a /* bank0 - 10 row bits */ - beq getSpdRowBank23 - - ori r20, r20, (MCCR1_BK0_11BITS | MCCR1_BK1_11BITS) - cmpli 0, 0, r3, 0x000b /* bank0 - 11 row bits */ - beq getSpdRowBank23 - - ori r20, r20, (MCCR1_BK0_12BITS | MCCR1_BK1_12BITS) - cmpli 0, 0, r3, 0x000c /* bank0 - 12 row bits */ - beq getSpdRowBank23 - - cmpli 0, 0, r3, 0x000d /* bank0 - 13 row bits */ - beq getSpdRowBank23 - - li r6, 0xe0 /* error codes in r6 and r7 */ - li r7, 0x10 - b toggleError /* fail - loop forever */ - -getSpdRowBank23: - li r3, 0x0103 /* get number of row bits from */ - /* spd for bank2/3 */ - bl spdRead - - ori r20, r20, (MCCR1_BK2_9BITS | MCCR1_BK3_9BITS) - cmpli 0, 0, r3, 0x0009 /* bank0 - 9 row bits */ - beq writeRowBits - - ori r20, r20, (MCCR1_BK2_10BITS | MCCR1_BK3_10BITS) - cmpli 0, 0, r3, 0x000a /* bank0 - 10 row bits */ - beq writeRowBits - - ori r20, r20, (MCCR1_BK2_11BITS | MCCR1_BK3_11BITS) - cmpli 0, 0, r3, 0x000b /* bank0 - 11 row bits */ - beq writeRowBits - - ori r20, r20, (MCCR1_BK2_12BITS | MCCR1_BK3_12BITS) - -/* - * set the Memory Configuration Reg. 3 - */ -writeRowBits: - lis r21, 0x000a /* CPX = 1, RAS6P = 4 */ - ori r21, r21, 0x2293 /* CAS5 = 2, CP4 = 1, */ - /* CAS3 = 2, RCD2 = 2, RP = 3 */ -/* - * set the Memory Configuration Reg. 4 - */ - lis r22, 0x0010 /* all SDRAM parameter 0, */ - /* WCBUF flow through, */ - /* RCBUF registered */ -/* - * get the size of bank 0-3 - */ - li r3, 0x0003 /* get row bits from spd bank0/1 */ - bl spdRead - - li r16, 0 /* bank size is: */ - /* (8*2^row*2^column)/0x100000 MB */ - ori r16, r16, 0x8000 - rlwnm r16, r16, r3, 0, 31 - - li r3, 0x0004 /* get column bits from spd bank0/1 */ - bl spdRead - - rlwnm r16, r16, r3, 0, 31 - - li r3, 0x0005 /* get number of banks from */ - /* spd for bank0/1 */ - bl spdRead - - cmpi 0, 0, r3, 2 /* 2 banks ? */ - bne EDOnobank1 - - mr r17, r16 - -EDOnobank1: - addi r3, r13, (Mspd23-MessageBlock) - bl Printf - - li r3, 0x0102 /* get RAM type spd for bank2/3 */ - bl spdRead - - cmpli 0, 0, r3, 0x0001 /* FPM ? */ - bne noFPM231 /* handle as EDO */ - addi r3, r13, (Mok-MessageBlock) - bl Printf - addi r3, r13, (MfpmRam-MessageBlock) - bl Printf - b EDObank2 -noFPM231: - cmpli 0, 0, r3, 0x0002 /* EDO ? */ - bne noEDO231 - addi r3, r13, (Mok-MessageBlock) - bl Printf - addi r3, r13, (MedoRam-MessageBlock) - bl Printf - b EDObank2 -noEDO231: - cmpli 0, 0, r3, 0x0004 /* SDRAM ? */ - bne noSDRAM231 - addi r3, r13, (Mok-MessageBlock) - bl Printf - addi r3, r13, (MsdRam-MessageBlock) - bl Printf - b configRAMcommon -noSDRAM231: - addi r3, r13, (Mfail-MessageBlock) - bl Printf - b configRAMcommon /* bank2/3 isn't present or no SDRAM */ - -EDObank2: - li r3, 0x0103 /* get row bits from spd for bank2/3 */ - bl spdRead - - li r18, 0 /* bank size is: */ - /* (8*2^row*2^column)/0x100000 MB */ - ori r18, r18, 0x8000 - rlwnm r18, r18, r3, 0, 31 - - li r3, 0x0104 /* get column bits from spd bank2/3 */ - bl spdRead - - rlwnm r18, r18, r3, 0, 31 - - li r3, 0x0105 /* get number of banks from */ - /* spd for bank2/3 */ - bl spdRead - - cmpi 0, 0, r3, 2 /* 2 banks ? */ - bne configRAMcommon - - mr r19, r18 - -configRAMcommon: - lis r1, MPC106_REG_ADDR@h - ori r1, r1, MPC106_REG_ADDR@l - lis r2, MPC106_REG_DATA@h - ori r2, r2, MPC106_REG_DATA@l - - li r0, 0 - -/* - * If we are already running in RAM (debug mode), we should - * NOT reset the MEMGO flag. Otherwise we will stop all memory - * accesses. - */ -#ifdef IN_RAM - lis r4, MCCR1_MEMGO@h - ori r4, r4, MCCR1_MEMGO@l - or r20, r20, r4 -#endif - -/* - * set the Memory Configuration Reg. 1 - */ - lis r3, MPC106_REG@h /* start building new reg number */ - ori r3, r3, MPC106_MCCR1 /* register number 0xf0 */ - stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ - eieio /* make sure mem. access is complete */ - stwbrx r20, r0, r2 /* write data to CONFIG_DATA */ -/* - * set the Memory Configuration Reg. 3 - */ - lis r3, MPC106_REG@h /* start building new reg number */ - ori r3, r3, MPC106_MCCR3 /* register number 0xf8 */ - stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ - eieio /* make sure mem. access is complete */ - stwbrx r21, r0, r2 /* write data to CONFIG_DATA */ -/* - * set the Memory Configuration Reg. 4 - */ - lis r3, MPC106_REG@h /* start building new reg number */ - ori r3, r3, MPC106_MCCR4 /* register number 0xfc */ - stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ - eieio /* make sure mem. access is complete */ - stwbrx r22, r0, r2 /* write data to CONFIG_DATA */ -/* - * set the memory boundary registers for bank 0-3 - */ - li r20, 0 - li r23, 0 - li r24, 0 - subi r21, r16, 1 /* calculate end address bank0 */ - li r22, (MBER_BANK0) - - cmpi 0, 0, r17, 0 /* bank1 present ? */ - beq nobank1 - - rlwinm r3, r16, 8, 16, 23 /* calculate start address of bank1 */ - or r20, r20, r3 - add r16, r16, r17 /* add to total memory size */ - subi r3, r16, 1 /* calculate end address of bank1 */ - rlwinm r3, r3, 8, 16, 23 - or r21, r21, r3 - ori r22, r22, (MBER_BANK1) /* enable bank1 */ - b bank2 - -nobank1: - ori r23, r23, 0x0300 /* set bank1 start to unused area */ - ori r24, r24, 0x0300 /* set bank1 end to unused area */ - -bank2: - cmpi 0, 0, r18, 0 /* bank2 present ? */ - beq nobank2 - - andi. r3, r16, 0x00ff /* calculate start address of bank2 */ - andi. r4, r16, 0x0300 - rlwinm r3, r3, 16, 8, 15 - or r20, r20, r3 - rlwinm r3, r4, 8, 8, 15 - or r23, r23, r3 - add r16, r16, r18 /* add to total memory size */ - subi r3, r16, 1 /* calculate end address of bank2 */ - andi. r4, r3, 0x0300 - andi. r3, r3, 0x00ff - rlwinm r3, r3, 16, 8, 15 - or r21, r21, r3 - rlwinm r3, r4, 8, 8, 15 - or r24, r24, r3 - ori r22, r22, (MBER_BANK2) /* enable bank2 */ - b bank3 - -nobank2: - lis r3, 0x0003 - or r23, r23, r3 /* set bank2 start to unused area */ - or r24, r24, r3 /* set bank2 end to unused area */ - -bank3: - cmpi 0, 0, r19, 0 /* bank3 present ? */ - beq nobank3 - - andi. r3, r16, 0x00ff /* calculate start address of bank3 */ - andi. r4, r16, 0x0300 - rlwinm r3, r3, 24, 0, 7 - or r20, r20, r3 - rlwinm r3, r4, 16, 0, 7 - or r23, r23, r3 - add r16, r16, r19 /* add to total memory size */ - subi r3, r16, 1 /* calculate end address of bank3 */ - andi. r4, r3, 0x0300 - andi. r3, r3, 0x00ff - rlwinm r3, r3, 24, 0, 7 - or r21, r21, r3 - rlwinm r3, r4, 16, 0, 7 - or r24, r24, r3 - ori r22, r22, (MBER_BANK3) /* enable bank3 */ - b writebound - -nobank3: - lis r3, 0x0300 - or r23, r23, r3 /* set bank3 start to unused area */ - or r24, r24, r3 /* set bank3 end to unused area */ - -writebound: - lis r3, MPC106_REG@h /* start building new reg number */ - ori r3, r3, MPC106_MSAR1 /* register number 0x80 */ - stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ - eieio /* make sure mem. access is complete */ - stwbrx r20, r0, r2 /* write data to CONFIG_DATA */ - - lis r3, MPC106_REG@h /* start building new reg number */ - ori r3, r3, MPC106_MEAR1 /* register number 0x90 */ - stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ - eieio /* make sure mem. access is complete */ - stwbrx r21, r0, r2 /* write data to CONFIG_DATA */ - - lis r3, MPC106_REG@h /* start building new reg number */ - ori r3, r3, MPC106_EMSAR1 /* register number 0x88 */ - stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ - eieio /* make sure mem. access is complete */ - stwbrx r23, r0, r2 /* write data to CONFIG_DATA */ - - lis r3, MPC106_REG@h /* start building new reg number */ - ori r3, r3, MPC106_EMEAR1 /* register number 0x98 */ - stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ - eieio /* make sure mem. access is complete */ - stwbrx r24, r0, r2 /* write data to CONFIG_DATA */ - -/* - * set boundaries of unused banks to unused address space - */ - lis r4, 0x0303 - ori r4, r4, 0x0303 /* bank 4-7 start and end adresses */ - lis r3, MPC106_REG@h /* start building new reg number */ - ori r3, r3, MPC106_EMSAR2 /* register number 0x8C */ - stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ - eieio /* make sure mem. access is complete */ - stwbrx r4, r0, r2 /* write data to CONFIG_DATA */ - - lis r3, MPC106_REG@h /* start building new reg number */ - ori r3, r3, MPC106_EMEAR2 /* register number 0x9C */ - stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ - eieio /* make sure mem. access is complete */ - stwbrx r4, r0, r2 /* write data to CONFIG_DATA */ - -/* - * set the Memory Configuration Reg. 2 - */ - lis r3, MPC106_REG@h /* start building new reg number */ - ori r3, r3, MPC106_MCCR2 /* register number 0xf4 */ - stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ - eieio /* make sure mem. access is complete */ - - li r3, 0x000c /* get refresh from spd for bank0/1 */ - bl spdRead - - cmpi 0, 0, r3, -1 /* error ? */ - bne common1 - - li r6, 0xe0 /* error codes in r6 and r7 */ - li r7, 0x20 - b toggleError /* fail - loop forever */ - -common1: - andi. r15, r3, 0x007f /* mask selfrefresh bit */ - li r3, 0x010c /* get refresh from spd for bank2/3 */ - bl spdRead - - cmpi 0, 0, r3, -1 /* error ? */ - beq common2 - andi. r3, r3, 0x007f /* mask selfrefresh bit */ - cmp 0, 0, r3, r15 /* find the lower */ - blt common3 - -common2: - mr r3, r15 - -common3: - li r4, 0x1010 /* refesh cycle 1028 clocks */ - /* left shifted 2 */ - cmpli 0, 0, r3, 0x0000 /* 15.6 us ? */ - beq writeRefresh - - li r4, 0x0808 /* refesh cycle 514 clocks */ - /* left shifted 2 */ - cmpli 0, 0, r3, 0x0002 /* 7.8 us ? */ - beq writeRefresh - - li r4, 0x2020 /* refesh cycle 2056 clocks */ - /* left shifted 2 */ - cmpli 0, 0, r3, 0x0003 /* 31.3 us ? */ - beq writeRefresh - - li r4, 0x4040 /* refesh cycle 4112 clocks */ - /* left shifted 2 */ - cmpli 0, 0, r3, 0x0004 /* 62.5 us ? */ - beq writeRefresh - - li r4, 0 - ori r4, r4, 0x8080 /* refesh cycle 8224 clocks */ - /* left shifted 2 */ - cmpli 0, 0, r3, 0x0005 /* 125 us ? */ - beq writeRefresh - - li r6, 0xe0 /* error codes in r6 and r7 */ - li r7, 0x21 - b toggleError /* fail - loop forever */ - -writeRefresh: - stwbrx r4, r0, r2 /* write data to CONFIG_DATA */ - -/* - * DRAM BANKS SHOULD BE ENABLED - */ - addi r3, r13, (Mactivate-MessageBlock) - bl Printf - mr r3, r16 - bl OutDec - addi r3, r13, (Mmbyte-MessageBlock) - bl Printf - - lis r3, MPC106_REG@h /* start building new reg number */ - ori r3, r3, MPC106_MBER /* register number 0xa0 */ - stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ - eieio /* make sure mem. access is complete */ - stb r22, 0(r2) /* write data to CONFIG_DATA */ - li r8, 0x63 /* PGMAX = 99 */ - stb r8, 3(r2) /* write data to CONFIG_DATA */ - -/* - * DRAM SHOULD NOW BE CONFIGURED AND ENABLED - * MUST WAIT 200us BEFORE ACCESSING - */ - li r0, 0x7800 - mtctr r0 - -wait200us: - bdnz wait200us - - lis r3, MPC106_REG@h /* start building new reg number */ - ori r3, r3, MPC106_MCCR1 /* register number 0xf0 */ - stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ - eieio /* make sure mem. access is complete */ - - lwbrx r4, r0, r2 /* load r4 from CONFIG_DATA */ - - lis r0, MCCR1_MEMGO@h /* MEMGO=1 */ - ori r0, r0, MCCR1_MEMGO@l - or r4, r4, r0 /* set the MEMGO bit */ - stwbrx r4, r0, r2 /* write mdfd data to CONFIG_DATA */ - - li r0, 0x7000 - mtctr r0 - -wait8ref: - bdnz wait8ref - - addi r3, r13, (Mok-MessageBlock) - bl Printf - - mtlr r25 - blr - -/* - * Infinite loop called in case of an error during RAM initialisation. - * error codes in r6 and r7. - */ -toggleError: - li r0, 0 - lis r9, 127 - ori r9, r9, 65535 -toggleError1: - addic r0, r0, 1 - cmpw cr1, r0, r9 - ble cr1, toggleError1 - li r0, 0 - lis r9, 127 - ori r9, r9, 65535 -toggleError2: - addic r0, r0, 1 - cmpw cr1, r0, r9 - ble cr1, toggleError2 - b toggleError - - -/****************************************************************************** - * This function performs a basic initialisation of the superio chip - * to enable basic console output and SPD access during RAM initialisation. - * - * Upon completion, SIO resource registers are mapped as follows: - * Resource Enabled Address - * UART1 Yes 3F8-3FF COM1 - * UART2 Yes 2F8-2FF COM2 - * GPIO Yes 220-227 - */ -.set SIO_LUNINDEX, 0x07 /* SIO LUN index register */ -.set SIO_CNFG1, 0x21 /* SIO configuration #1 register */ -.set SIO_PCSCI, 0x23 /* SIO PCS configuration index reg */ -.set SIO_PCSCD, 0x24 /* SIO PCS configuration data reg */ -.set SIO_ACTIVATE, 0x30 /* SIO activate register */ -.set SIO_IOBASEHI, 0x60 /* SIO I/O port base address, 15:8 */ -.set SIO_IOBASELO, 0x61 /* SIO I/O port base address, 7:0 */ -.set SIO_LUNENABLE, 0x01 /* SIO LUN enable */ - -.sioInit: - mfspr r7, 8 /* save link register */ - -.sioInit_87308: - -/* - * Get base addr of ISA I/O space - */ - lis r6, CONFIG_SYS_ISA_IO@h - ori r6, r6, CONFIG_SYS_ISA_IO@l - -/* - * Set offset to base address for config registers. - */ -#if defined(CONFIG_SYS_NS87308_BADDR_0x) - addi r4, r0, 0x0279 -#elif defined(CONFIG_SYS_NS87308_BADDR_10) - addi r4, r0, 0x015C -#elif defined(CONFIG_SYS_NS87308_BADDR_11) - addi r4, r0, 0x002E -#endif - add r6, r6, r4 /* add offset to base */ - or r3, r6, r6 /* make a copy */ - -/* - * PMC (LUN 8) - */ - addi r4, r0, SIO_LUNINDEX /* select PMC LUN */ - addi r5, r0, 0x8 - bl .sio_bw - addi r4, r0, SIO_IOBASEHI /* initialize PMC address to 0x460 */ - addi r5, r0, 0x04 - bl .sio_bw - addi r4, r0, SIO_IOBASELO - addi r5, r0, 0x60 - bl .sio_bw - addi r4, r0, SIO_ACTIVATE /* enable PMC */ - addi r5, r0, SIO_LUNENABLE - bl .sio_bw - - lis r8, CONFIG_SYS_ISA_IO@h - ori r8, r8, 0x0460 - li r9, 0x03 - stb r9, 0(r8) /* select PMC2 register */ - eieio - li r9, 0x00 - stb r9, 1(r8) /* SuperI/O clock src: 24MHz via X1 */ - eieio - -/* - * map UART1 (LUN 6) or UART2 (LUN 5) to COM1 (0x3F8) - */ - addi r4, r0, SIO_LUNINDEX /* select COM1 LUN */ - addi r5, r0, 0x6 - bl .sio_bw - - addi r4, r0, SIO_IOBASEHI /* initialize COM1 address to 0x3F8 */ - addi r5, r0, 0x03 - bl .sio_bw - - addi r4, r0, SIO_IOBASELO - addi r5, r0, 0xF8 - bl .sio_bw - - addi r4, r0, SIO_ACTIVATE /* enable COM1 */ - addi r5, r0, SIO_LUNENABLE - bl .sio_bw - -/* - * Init COM1 for polled output - */ - lis r8, CONFIG_SYS_ISA_IO@h - ori r8, r8, 0x03f8 - li r9, 0x00 - stb r9, 1(r8) /* int disabled */ - eieio - li r9, 0x00 - stb r9, 4(r8) /* modem ctrl */ - eieio - li r9, 0x80 - stb r9, 3(r8) /* link ctrl, bank select */ - eieio - li r9, 115200/CONFIG_BAUDRATE - stb r9, 0(r8) /* baud rate (LSB)*/ - eieio - rotrwi r9, r9, 8 - stb r9, 1(r8) /* baud rate (MSB) */ - eieio - li r9, 0x03 - stb r9, 3(r8) /* 8 data bits, 1 stop bit, */ - /* no parity */ - eieio - li r9, 0x0b - stb r9, 4(r8) /* enable the receiver and transmitter */ - eieio - -waitEmpty: - lbz r9, 5(r8) /* transmit empty */ - andi. r9, r9, 0x40 - beq waitEmpty - li r9, 0x47 - stb r9, 3(r8) /* send break, 8 data bits, */ - /* 2 stop bits, no parity */ - eieio - - lis r0, 0x0001 - mtctr r0 - -waitCOM1: - lwz r0, 5(r8) /* load from port for delay */ - bdnz waitCOM1 - -waitEmpty1: - lbz r9, 5(r8) /* transmit empty */ - andi. r9, r9, 0x40 - beq waitEmpty1 - li r9, 0x07 - stb r9, 3(r8) /* 8 data bits, 2 stop bits, */ - /* no parity */ - eieio - -/* - * GPIO (LUN 7) - */ - addi r4, r0, SIO_LUNINDEX /* select GPIO LUN */ - addi r5, r0, 0x7 - bl .sio_bw - - addi r4, r0, SIO_IOBASEHI /* initialize GPIO address to 0x220 */ - addi r5, r0, 0x02 - bl .sio_bw - - addi r4, r0, SIO_IOBASELO - addi r5, r0, 0x20 - bl .sio_bw - - addi r4, r0, SIO_ACTIVATE /* enable GPIO */ - addi r5, r0, SIO_LUNENABLE - bl .sio_bw - -.sioInit_done: - -/* - * Get base addr of ISA I/O space - */ - lis r3, CONFIG_SYS_ISA_IO@h - ori r3, r3, CONFIG_SYS_ISA_IO@l - - addi r3, r3, 0x015C /* adjust to superI/O 87308 base */ - or r6, r3, r3 /* make a copy */ -/* - * CS0 - */ - addi r4, r0, SIO_PCSCI /* select PCSCIR */ - addi r5, r0, 0x00 - bl .sio_bw - addi r4, r0, SIO_PCSCD /* select PCSCDR */ - addi r5, r0, 0x00 - bl .sio_bw - addi r4, r0, SIO_PCSCI /* select PCSCIR */ - addi r5, r0, 0x01 - bl .sio_bw - addi r4, r0, SIO_PCSCD /* select PCSCDR */ - addi r5, r0, 0x76 - bl .sio_bw - addi r4, r0, SIO_PCSCI /* select PCSCIR */ - addi r5, r0, 0x02 - bl .sio_bw - addi r4, r0, SIO_PCSCD /* select PCSCDR */ - addi r5, r0, 0x40 - bl .sio_bw -/* - * CS1 - */ - addi r4, r0, SIO_PCSCI /* select PCSCIR */ - addi r5, r0, 0x05 - bl .sio_bw - addi r4, r0, SIO_PCSCD /* select PCSCDR */ - addi r5, r0, 0x00 - bl .sio_bw - addi r4, r0, SIO_PCSCI /* select PCSCIR */ - addi r5, r0, 0x05 - bl .sio_bw - addi r4, r0, SIO_PCSCD /* select PCSCDR */ - addi r5, r0, 0x70 - bl .sio_bw - addi r4, r0, SIO_PCSCI /* select PCSCIR */ - addi r5, r0, 0x06 - bl .sio_bw - addi r4, r0, SIO_PCSCD /* select PCSCDR */ - addi r5, r0, 0x1C - bl .sio_bw -/* - * CS2 - */ - addi r4, r0, SIO_PCSCI /* select PCSCIR */ - addi r5, r0, 0x08 - bl .sio_bw - addi r4, r0, SIO_PCSCD /* select PCSCDR */ - addi r5, r0, 0x00 - bl .sio_bw - addi r4, r0, SIO_PCSCI /* select PCSCIR */ - addi r5, r0, 0x09 - bl .sio_bw - addi r4, r0, SIO_PCSCD /* select PCSCDR */ - addi r5, r0, 0x71 - bl .sio_bw - addi r4, r0, SIO_PCSCI /* select PCSCIR */ - addi r5, r0, 0x0A - bl .sio_bw - addi r4, r0, SIO_PCSCD /* select PCSCDR */ - addi r5, r0, 0x1C - bl .sio_bw - - mtspr 8, r7 /* restore link register */ - bclr 20, 0 /* return to caller */ - -/* - * this function writes a register to the SIO chip - */ -.sio_bw: - stb r4, 0(r3) /* write index register with register offset */ - eieio - sync - stb r5, 1(r3) /* 1st write */ - eieio - sync - stb r5, 1(r3) /* 2nd write */ - eieio - sync - bclr 20, 0 /* return to caller */ -/* - * this function reads a register from the SIO chip - */ -.sio_br: - stb r4, 0(r3) /* write index register with register offset */ - eieio - sync - lbz r3, 1(r3) /* retrieve specified reg offset contents */ - eieio - sync - bclr 20, 0 /* return to caller */ - -/* - * Print a message to COM1 in polling mode - * r10=COM1 port, r3=(char*)string - */ -.globl Printf -Printf: - lis r10, CONFIG_SYS_ISA_IO@h /* COM1 port */ - ori r10, r10, 0x03f8 - -WaitChr: - lbz r0, 5(r10) /* read link status */ - eieio - andi. r0, r0, 0x40 /* mask transmitter empty bit */ - beq cr0, WaitChr /* wait till empty */ - lbzx r0, r0, r3 /* get char */ - stb r0, 0(r10) /* write to transmit reg */ - eieio - addi r3, r3, 1 /* next char */ - lbzx r0, r0, r3 /* get char */ - cmpwi cr1, r0, 0 /* end of string ? */ - bne cr1, WaitChr - blr - -/* - * Print 8/4/2 digits hex value to COM1 in polling mode - * r10=COM1 port, r3=val - */ -OutHex2: - li r9, 4 /* shift reg for 2 digits */ - b OHstart -OutHex4: - li r9, 12 /* shift reg for 4 digits */ - b OHstart - .globl OutHex -OutHex: - li r9, 28 /* shift reg for 8 digits */ -OHstart: - lis r10, CONFIG_SYS_ISA_IO@h /* COM1 port */ - ori r10, r10, 0x03f8 -OutDig: - lbz r0, 5(r10) /* read link status */ - eieio - andi. r0, r0, 0x40 /* mask transmitter empty bit */ - beq cr0, OutDig - sraw r0, r3, r9 - clrlwi r0, r0, 28 - cmpwi cr1, r0, 9 - ble cr1, digIsNum - addic r0, r0, 55 - b nextDig -digIsNum: - addic r0, r0, 48 -nextDig: - stb r0, 0(r10) /* write to transmit reg */ - eieio - addic. r9, r9, -4 - bge OutDig - blr -/* - * Print 3 digits hdec value to COM1 in polling mode - * r10=COM1 port, r3=val, r7=x00, r8=x0, r9=x, r0, r6=scratch - */ -.globl OutDec -OutDec: - li r6, 10 - divwu r0, r3, r6 /* r0 = r3 / 10, r9 = r3 mod 10 */ - mullw r10, r0, r6 - subf r9, r10, r3 - - mr r3, r0 - divwu r0, r3, r6 /* r0 = r3 / 10, r8 = r3 mod 10 */ - mullw r10, r0, r6 - subf r8, r10, r3 - - mr r3, r0 - divwu r0, r3, r6 /* r0 = r3 / 10, r7 = r3 mod 10 */ - mullw r10, r0, r6 - subf r7, r10, r3 - - lis r10, CONFIG_SYS_ISA_IO@h /* COM1 port */ - ori r10, r10, 0x03f8 - - or. r7, r7, r7 - bne noblank1 - li r3, 0x20 - b OutDec4 - -noblank1: - addi r3, r7, 48 /* convert to ASCII */ - -OutDec4: - lbz r0, 0(r13) /* slow down dummy read */ - lbz r0, 5(r10) /* read link status */ - eieio - andi. r0, r0, 0x40 /* mask transmitter empty bit */ - beq cr0, OutDec4 - stb r3, 0(r10) /* x00 to transmit */ - eieio - - or. r7, r7, r8 - beq OutDec5 - - addi r3, r8, 48 /* convert to ASCII */ -OutDec5: - lbz r0, 0(r13) /* slow down dummy read */ - lbz r0, 5(r10) /* read link status */ - eieio - andi. r0, r0, 0x40 /* mask transmitter empty bit */ - beq cr0, OutDec5 - stb r3, 0(r10) /* x0 to transmit */ - eieio - - addi r3, r9, 48 /* convert to ASCII */ -OutDec6: - lbz r0, 0(r13) /* slow down dummy read */ - lbz r0, 5(r10) /* read link status */ - eieio - andi. r0, r0, 0x40 /* mask transmitter empty bit */ - beq cr0, OutDec6 - stb r3, 0(r10) /* x to transmit */ - eieio - blr -/* - * Print a char to COM1 in polling mode - * r10=COM1 port, r3=char - */ -.globl OutChr -OutChr: - lis r10, CONFIG_SYS_ISA_IO@h /* COM1 port */ - ori r10, r10, 0x03f8 - -OutChr1: - lbz r0, 5(r10) /* read link status */ - eieio - andi. r0, r0, 0x40 /* mask transmitter empty bit */ - beq cr0, OutChr1 /* wait till empty */ - stb r3, 0(r10) /* write to transmit reg */ - eieio - blr -/* - * Input: r3 adr to read - * Output: r3 val or -1 for error - */ -spdRead: - mfspr r26, 8 /* save link register */ - - lis r30, CONFIG_SYS_ISA_IO@h - ori r30, r30, 0x220 /* GPIO Port 1 */ - li r7, 0x00 - li r8, 0x100 - and. r5, r3, r8 - beq spdbank0 - li r12, 0x08 - li r4, 0x10 - li r6, 0x18 - b spdRead1 - -spdbank0: - li r12, 0x20 /* set I2C data */ - li r4, 0x40 /* set I2C clock */ - li r6, 0x60 /* set I2C clock and data */ - -spdRead1: - li r8, 0x80 - - bl spdStart /* access I2C bus as master */ - li r10, 0xa0 /* write to SPD */ - bl spdWriteByte - bl spdReadAck /* ACK returns in r10 */ - cmpw cr0, r10, r7 - bne AckErr /* r10 must be 0, if ACK received */ - mr r10, r3 /* adr to read */ - bl spdWriteByte - bl spdReadAck - cmpw cr0, r10, r7 - bne AckErr - bl spdStart - li r10, 0xa1 /* read from SPD */ - bl spdWriteByte - bl spdReadAck - cmpw cr0, r10, r7 - bne AckErr - bl spdReadByte /* return val in r10 */ - bl spdWriteAck - bl spdStop /* release I2C bus */ - mr r3, r10 - mtspr 8, r26 /* restore link register */ - blr -/* - * ACK error occurred - */ -AckErr: - bl spdStop - orc r3, r0, r0 /* return -1 */ - mtspr 8, r26 /* restore link register */ - blr - -/* - * Routines to read from RAM spd. - * r30 - GPIO Port1 address in all cases. - * r4 - clock mask for SPD - * r6 - port mask for SPD - * r12 - data mask for SPD - */ -waitSpd: - li r0, 0x1000 - mtctr r0 -wSpd: - bdnz wSpd - bclr 20, 0 /* return to caller */ - -/* - * establish START condition on I2C bus - */ -spdStart: - mfspr r27, 8 /* save link register */ - stb r6, 0(r30) /* set SDA and SCL */ - eieio - stb r6, 1(r30) /* switch GPIO to output */ - eieio - bl waitSpd - stb r4, 0(r30) /* reset SDA */ - eieio - bl waitSpd - stb r7, 0(r30) /* reset SCL */ - eieio - bl waitSpd - mtspr 8, r27 - bclr 20, 0 /* return to caller */ - -/* - * establish STOP condition on I2C bus - */ -spdStop: - mfspr r27, 8 /* save link register */ - stb r7, 0(r30) /* reset SCL and SDA */ - eieio - stb r6, 1(r30) /* switch GPIO to output */ - eieio - bl waitSpd - stb r4, 0(r30) /* set SCL */ - eieio - bl waitSpd - stb r6, 0(r30) /* set SDA and SCL */ - eieio - bl waitSpd - stb r7, 1(r30) /* switch GPIO to input */ - eieio - mtspr 8, r27 - bclr 20, 0 /* return to caller */ - -spdReadByte: - mfspr r27, 8 - stb r4, 1(r30) /* set GPIO for SCL output */ - eieio - li r9, 0x08 - li r10, 0x00 -loopRB: - stb r7, 0(r30) /* reset SDA and SCL */ - eieio - bl waitSpd - stb r4, 0(r30) /* set SCL */ - eieio - bl waitSpd - lbz r5, 0(r30) /* read from GPIO Port1 */ - rlwinm r10, r10, 1, 0, 31 - and. r5, r5, r12 - beq clearBit - ori r10, r10, 0x01 /* append _1_ */ -clearBit: - stb r7, 0(r30) /* reset SCL */ - eieio - bl waitSpd - addic. r9, r9, -1 - bne loopRB - mtspr 8, r27 - bclr 20, 0 /* return (r10) to caller */ - -/* - * spdWriteByte writes bits 24 - 31 of r10 to I2C. - * r8 contains bit mask 0x80 - */ -spdWriteByte: - mfspr r27, 8 /* save link register */ - li r9, 0x08 /* write octet */ - and. r5, r10, r8 - bne sWB1 - stb r7, 0(r30) /* set SDA to _0_ */ - eieio - b sWB2 -sWB1: - stb r12, 0(r30) /* set SDA to _1_ */ - eieio -sWB2: - stb r6, 1(r30) /* set GPIO to output */ - eieio -loopWB: - and. r5, r10, r8 - bne sWB3 - stb r7, 0(r30) /* set SDA to _0_ */ - eieio - b sWB4 -sWB3: - stb r12, 0(r30) /* set SDA to _1_ */ - eieio -sWB4: - bl waitSpd - and. r5, r10, r8 - bne sWB5 - stb r4, 0(r30) /* set SDA to _0_ and SCL */ - eieio - b sWB6 -sWB5: - stb r6, 0(r30) /* set SDA to _1_ and SCL */ - eieio -sWB6: - bl waitSpd - and. r5, r10, r8 - bne sWB7 - stb r7, 0(r30) /* set SDA to _0_ and reset SCL */ - eieio - b sWB8 -sWB7: - stb r12, 0(r30) /* set SDA to _1_ and reset SCL */ - eieio -sWB8: - bl waitSpd - rlwinm r10, r10, 1, 0, 31 /* next bit */ - addic. r9, r9, -1 - bne loopWB - mtspr 8, r27 - bclr 20, 0 /* return to caller */ - -/* - * Read ACK from SPD, return value in r10 - */ -spdReadAck: - mfspr r27, 8 /* save link register */ - stb r4, 1(r30) /* set GPIO to output */ - eieio - stb r7, 0(r30) /* reset SDA and SCL */ - eieio - bl waitSpd - stb r4, 0(r30) /* set SCL */ - eieio - bl waitSpd - lbz r10, 0(r30) /* read GPIO Port 1 and mask SDA */ - and r10, r10, r12 - bl waitSpd - stb r7, 0(r30) /* reset SDA and SCL */ - eieio - bl waitSpd - mtspr 8, r27 - bclr 20, 0 /* return (r10) to caller */ - -spdWriteAck: - mfspr r27, 8 - stb r12, 0(r30) /* set SCL */ - eieio - stb r6, 1(r30) /* set GPIO to output */ - eieio - bl waitSpd - stb r6, 0(r30) /* SDA and SCL */ - eieio - bl waitSpd - stb r12, 0(r30) /* reset SCL */ - eieio - bl waitSpd - mtspr 8, r27 - bclr 20, 0 /* return to caller */ - -get_lnk_reg: - mflr r3 /* return link reg */ - blr - -/* - * Messages for console output - */ -.globl MessageBlock -MessageBlock: -Mok: - .ascii "OK\015\012\000" -Mfail: - .ascii "FAILED\015\012\000" -Mna: - .ascii "NA\015\012\000" -MinitLogo: - .ascii "\015\012*** ELTEC Elektronik, Mainz ***\015\012" - .ascii "\015\012Initialising RAM\015\012\000" -Mspd01: - .ascii " Reading SPD of bank0/1 ..... \000" -Mspd23: - .ascii " Reading SPD of bank2/3 ..... \000" -MfpmRam: - .ascii " RAM-Type: FPM \015\012\000" -MedoRam: - .ascii " RAM-Type: EDO \015\012\000" -MsdRam: - .ascii " RAM-Type: SDRAM \015\012\000" -Mactivate: - .ascii " Activating \000" -Mmbyte: - .ascii " MB .......... \000" - .align 4 diff --git a/board/eltec/bab7xx/bab7xx.c b/board/eltec/bab7xx/bab7xx.c deleted file mode 100644 index ea4897b..0000000 --- a/board/eltec/bab7xx/bab7xx.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Andreas Heppel <aheppel@sysgo.de> - * (C) Copyright 2001 ELTEC Elektronik AG - * Frank Gottschling <fgottschling@eltec.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <command.h> -#include <mpc106.h> -#include <mk48t59.h> -#include <74xx_7xx.h> -#include <ns87308.h> -#include <video_fb.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -/*---------------------------------------------------------------------------*/ -/* - * Get Bus clock frequency - */ -ulong bab7xx_get_bus_freq (void) -{ - /* - * The GPIO Port 1 on BAB7xx reflects the bus speed. - */ - volatile struct GPIO *gpio = - (struct GPIO *) (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_GPIO_BASE); - - unsigned char data = gpio->dta1; - - if (data & 0x02) - return 66666666; - - return 83333333; -} - -/*---------------------------------------------------------------------------*/ - -/* - * Measure CPU clock speed (core clock GCLK1) (Approx. GCLK frequency in Hz) - */ -ulong bab7xx_get_gclk_freq (void) -{ - static const int pllratio_to_factor[] = { - 00, 75, 70, 00, 20, 65, 100, 45, 30, 55, 40, 50, 80, 60, 35, - 00, - }; - - return pllratio_to_factor[get_hid1 () >> 28] * - (bab7xx_get_bus_freq () / 10); -} - -/*----------------------------------------------------------------------------*/ - -int checkcpu (void) -{ - uint pvr = get_pvr (); - - printf ("MPC7xx V%d.%d", (pvr >> 8) & 0xFF, pvr & 0xFF); - printf (" at %ld / %ld MHz\n", bab7xx_get_gclk_freq () / 1000000, - bab7xx_get_bus_freq () / 1000000); - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -int checkboard (void) -{ -#ifdef CONFIG_SYS_ADDRESS_MAP_A - puts ("Board: ELTEC BAB7xx PReP\n"); -#else - puts ("Board: ELTEC BAB7xx CHRP\n"); -#endif - return (0); -} - -/* ------------------------------------------------------------------------- */ - -int checkflash (void) -{ - /* TODO: XXX XXX XXX */ - printf ("2 MB ## Test not implemented yet ##\n"); - return (0); -} - -/* ------------------------------------------------------------------------- */ - - -static unsigned int mpc106_read_cfg_dword (unsigned int reg) -{ - unsigned int reg_addr = MPC106_REG | (reg & 0xFFFFFFFC); - - out32r (MPC106_REG_ADDR, reg_addr); - - return (in32r (MPC106_REG_DATA | (reg & 0x3))); -} - -/* ------------------------------------------------------------------------- */ - -long int dram_size (int board_type) -{ - /* No actual initialisation to do - done when setting up - * PICRs MCCRs ME/SARs etc in ram_init.S. - */ - - register unsigned long i, msar1, mear1, memSize; - -#if defined(CONFIG_SYS_MEMTEST) - register unsigned long reg; - - printf ("Testing DRAM\n"); - - /* write each mem addr with it's address */ - for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4) - *reg = reg; - - for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4) { - if (*reg != reg) - return -1; - } -#endif - - /* - * Since MPC106 memory controller chip has already been set to - * control all memory, just read and interpret its memory boundery register. - */ - memSize = 0; - msar1 = mpc106_read_cfg_dword (MPC106_MSAR1); - mear1 = mpc106_read_cfg_dword (MPC106_MEAR1); - i = mpc106_read_cfg_dword (MPC106_MBER) & 0xf; - - do { - if (i & 0x01) /* is bank enabled ? */ - memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1; - msar1 >>= 8; - mear1 >>= 8; - i >>= 1; - } while (i); - - return (memSize * 0x100000); -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - return dram_size (board_type); -} - -/* ------------------------------------------------------------------------- */ - -void after_reloc (ulong dest_addr) -{ - /* - * Jump to the main U-Boot board init code - */ - board_init_r ((gd_t *) gd, dest_addr); -} - -/* ------------------------------------------------------------------------- */ - -/* - * do_reset is done here because in this case it is board specific, since the - * 7xx CPUs can only be reset by external HW (the RTC in this case). - */ -int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ -#if defined(CONFIG_RTC_MK48T59) - /* trigger watchdog immediately */ - rtc_set_watchdog (1, RTC_WD_RB_16TH); -#else -#error "You must define the macro CONFIG_RTC_MK48T59." -#endif - return 0; -} - -/* ------------------------------------------------------------------------- */ - -#if defined(CONFIG_WATCHDOG) -/* - * Since the 7xx CPUs don't have an internal watchdog, this function is - * board specific. We use the RTC here. - */ -void watchdog_reset (void) -{ -#if defined(CONFIG_RTC_MK48T59) - /* we use a 32 sec watchdog timer */ - rtc_set_watchdog (8, RTC_WD_RB_4); -#else -#error "You must define the macro CONFIG_RTC_MK48T59." -#endif -} -#endif /* CONFIG_WATCHDOG */ - -/* ------------------------------------------------------------------------- */ - -#ifdef CONFIG_CONSOLE_EXTRA_INFO -extern GraphicDevice smi; - -void video_get_info_str (int line_number, char *info) -{ - /* init video info strings for graphic console */ - switch (line_number) { - case 1: - sprintf (info, " MPC7xx V%d.%d at %ld / %ld MHz", - (get_pvr () >> 8) & 0xFF, - get_pvr () & 0xFF, - bab7xx_get_gclk_freq () / 1000000, - bab7xx_get_bus_freq () / 1000000); - return; - case 2: - sprintf (info, - " ELTEC BAB7xx with %ld MB DRAM and %ld MB FLASH", - dram_size (0) / 0x100000, flash_init () / 0x100000); - return; - case 3: - sprintf (info, " %s", smi.modeIdent); - return; - } - - /* no more info lines */ - *info = 0; - return; -} -#endif - -/*---------------------------------------------------------------------------*/ - -int board_eth_init(bd_t *bis) -{ - return pci_eth_init(bis); -} diff --git a/board/eltec/bab7xx/dc_srom.c b/board/eltec/bab7xx/dc_srom.c deleted file mode 100644 index a44af6e..0000000 --- a/board/eltec/bab7xx/dc_srom.c +++ /dev/null @@ -1,291 +0,0 @@ -/* - * (C) Copyright 2002 ELTEC Elektronik AG - * Frank Gottschling <fgottschling@eltec.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * SRom I/O routines. - */ - -#include <common.h> -#include <pci.h> -#include "srom.h" - -#define SROM_RD 0x00004000 /* Read from Boot ROM */ -#define SROM_WR 0x00002000 /* Write to Boot ROM */ -#define SROM_SR 0x00000800 /* Select Serial ROM when set */ - -#define DT_IN 0x00000004 /* Serial Data In */ -#define DT_CLK 0x00000002 /* Serial ROM Clock */ -#define DT_CS 0x00000001 /* Serial ROM Chip Select */ - -static u_int dc_srom_iobase; - -/*----------------------------------------------------------------------------*/ - -static int inl(u_long addr) -{ - return le32_to_cpu(*(volatile u_long *)(addr)); -} - -/*----------------------------------------------------------------------------*/ - -static void outl (int command, u_long addr) -{ - *(volatile u_long *)(addr) = cpu_to_le32(command); -} - -/*----------------------------------------------------------------------------*/ - -static void sendto_srom(u_int command, u_long addr) -{ - outl(command, addr); - udelay(1); - - return; -} - -/*----------------------------------------------------------------------------*/ - -static int getfrom_srom(u_long addr) -{ - s32 tmp; - - tmp = inl(addr); - udelay(1); - - return tmp; -} - -/*----------------------------------------------------------------------------*/ - -static void srom_latch (u_int command, u_long addr) -{ - sendto_srom (command, addr); - sendto_srom (command | DT_CLK, addr); - sendto_srom (command, addr); - - return; -} - -/*----------------------------------------------------------------------------*/ - -static void srom_command_rd (u_int command, u_long addr) -{ - srom_latch (command, addr); - srom_latch (command, addr); - srom_latch ((command & 0x0000ff00) | DT_CS, addr); - - return; -} - -/*----------------------------------------------------------------------------*/ - -static void srom_command_wr (u_int command, u_long addr) -{ - srom_latch (command, addr); - srom_latch ((command & 0x0000ff00) | DT_CS, addr); - srom_latch (command, addr); - - return; -} - -/*----------------------------------------------------------------------------*/ - -static void srom_address(u_int command, u_long addr, u_char offset) -{ - int i; - signed char a; - - a = (char)(offset << 2); - for (i=0; i<6; i++, a <<= 1) - { - srom_latch(command | ((a < 0) ? DT_IN : 0), addr); - } - udelay(1); - - i = (getfrom_srom(addr) >> 3) & 0x01; - - return; -} -/*----------------------------------------------------------------------------*/ - -static short srom_data_rd (u_int command, u_long addr) -{ - int i; - short word = 0; - s32 tmp; - - for (i=0; i<16; i++) - { - sendto_srom(command | DT_CLK, addr); - tmp = getfrom_srom(addr); - sendto_srom(command, addr); - - word = (word << 1) | ((tmp >> 3) & 0x01); - } - - sendto_srom(command & 0x0000ff00, addr); - - return word; -} - -/*----------------------------------------------------------------------------*/ - -static int srom_data_wr (u_int command, u_long addr, short val) -{ - int i; - u_long longVal; - s32 tmp; - - longVal = (u_long)(le16_to_cpu(val)); - - for (i=0; i<16; i++) - { - tmp = (longVal & 0x8000)>>13; - - sendto_srom (tmp | command, addr); - sendto_srom (tmp | command | DT_CLK, addr); - sendto_srom (tmp | command, addr); - - longVal = longVal<<1; - } - - sendto_srom(command & 0x0000ff00, addr); - sendto_srom(command, addr); - - tmp = 100; - do - { - if ((getfrom_srom(dc_srom_iobase) & 0x8) == 0x8) - break; - udelay(1000); - } while (--tmp); - - if (tmp == 0) - { - printf("Write DEC21143 SRom timed out !\n"); - return (-1); - } - - return 0; -} - - -/*----------------------------------------------------------------------------*/ -static short srom_rd (u_long addr, u_char offset) -{ - sendto_srom (SROM_RD | SROM_SR, addr); - srom_latch (SROM_RD | SROM_SR | DT_CS, addr); - - srom_command_rd (SROM_RD | SROM_SR | DT_IN | DT_CS, addr); - - srom_address (SROM_RD | SROM_SR | DT_CS, addr, offset); - - return srom_data_rd (SROM_RD | SROM_SR | DT_CS, addr); -} - -/*----------------------------------------------------------------------------*/ - -static void srom_wr_enable (u_long addr) -{ - int i; - - sendto_srom (SROM_WR | SROM_SR, addr); - srom_latch (SROM_WR | SROM_SR | DT_CS, addr); - - srom_latch (SROM_WR | SROM_SR | DT_IN | DT_CS, addr); - srom_latch (SROM_WR | SROM_SR | DT_CS, addr); - srom_latch (SROM_WR | SROM_SR | DT_CS, addr); - - for (i=0; i<6; i++) - { - srom_latch (SROM_WR | SROM_SR | DT_IN | DT_CS, addr); - } -} - -/*----------------------------------------------------------------------------*/ - -static int srom_wr (u_long addr, u_char offset, short val) -{ - srom_wr_enable (addr); - - sendto_srom (SROM_WR | SROM_SR, addr); - srom_latch (SROM_WR | SROM_SR | DT_CS, addr); - - srom_command_wr (SROM_WR | SROM_SR | DT_IN | DT_CS, addr); - - srom_address (SROM_WR | SROM_SR | DT_CS, addr, offset); - - return srom_data_wr (SROM_WR | SROM_SR | DT_CS, addr, val); -} - -/*----------------------------------------------------------------------------*/ -/* - * load data from the srom - */ -int dc_srom_load (u_short *dest) -{ - int offset; - short tmp; - - /* get srom iobase from local network controller */ - pci_read_config_dword(PCI_BDF(0,14,0), PCI_BASE_ADDRESS_1, &dc_srom_iobase); - dc_srom_iobase &= PCI_BASE_ADDRESS_MEM_MASK; - dc_srom_iobase = pci_mem_to_phys(PCI_BDF(0,14,0), dc_srom_iobase); - dc_srom_iobase += 0x48; /* io offset for srom access */ - - memset (dest, 0, 128); - for (offset=0; offset<64; offset++) - { - tmp = srom_rd (dc_srom_iobase, offset); - *dest++ = le16_to_cpu(tmp); - } - - return (0); -} - -/*----------------------------------------------------------------------------*/ - -/* - * store data into the srom - */ -int dc_srom_store (u_short *src) -{ - int offset; - - /* get srom iobase from local network controller */ - pci_read_config_dword(PCI_BDF(0,14,0), PCI_BASE_ADDRESS_1, &dc_srom_iobase); - dc_srom_iobase &= PCI_BASE_ADDRESS_MEM_MASK; - dc_srom_iobase = pci_mem_to_phys(PCI_BDF(0,14,0), dc_srom_iobase); - dc_srom_iobase += 0x48; /* io offset for srom access */ - - for (offset=0; offset<64; offset++) - { - if (srom_wr (dc_srom_iobase, offset, *src) == -1) - return (-1); - src++; - } - - return (0); -} - -/*----------------------------------------------------------------------------*/ diff --git a/board/eltec/bab7xx/el_srom.c b/board/eltec/bab7xx/el_srom.c deleted file mode 100644 index 73f8066..0000000 --- a/board/eltec/bab7xx/el_srom.c +++ /dev/null @@ -1,292 +0,0 @@ -/* - * (C) Copyright 2002 ELTEC Elektronik AG - * Frank Gottschling <fgottschling@eltec.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include "srom.h" - -/*----------------------------------------------------------------------------*/ -/* - * START sequence - * _ _________ - * SCLK _> \____ - * _ ____ - * SDIO _> \_________ - * : : : - */ -static void eepStart (void) -{ - out8(I2C_BUS_DAT, 0x60); /* SCLK = high SDIO = high */ - out8(I2C_BUS_DIR, 0x60); /* set output direction for SCLK/SDIO */ - udelay(10); - out8(I2C_BUS_DAT, 0x40); /* SCLK = high SDIO = low */ - udelay(10); - out8(I2C_BUS_DAT, 0x00); /* SCLK = low SDIO = low */ - udelay(10); -} - -/*----------------------------------------------------------------------------*/ -/* - * STOP sequence - * _______ - * SCLK _____/ - * _ ___ - * SDIO _>_______/ - * : : : - */ -static void eepStop (void) -{ - out8(I2C_BUS_DAT, 0x00); /* SCLK = low SDIO = low */ - out8(I2C_BUS_DIR, 0x60); /* set output direction for SCLK/SDIO */ - udelay(10); - out8(I2C_BUS_DAT, 0x40); /* SCLK = high SDIO = low */ - udelay(10); - out8(I2C_BUS_DAT, 0x60); /* SCLK = high SDIO = high */ - udelay(10); - out8(I2C_BUS_DIR, 0x00); /* reset to input direction */ -} - -/*----------------------------------------------------------------------------*/ -/* - * Read one byte from EEPROM - * ___ ___ ___ ___ ___ ___ ___ ___ - * SCLK ___/ \___/ \___/ \___/ \___/ \___/ \___/ \___/ \ - * _________________________________________________________________ - * SDIO > ^ ^ ^ ^ ^ ^ ^ ^ - * : : : : : : : : : : : : : : : : : - */ -static unsigned char eepReadByte (void) -{ - register unsigned char buf = 0x00; - register int i; - - out8(I2C_BUS_DIR, 0x40); - - for (i = 0; i < 8; i++) - { - out8(I2C_BUS_DAT, 0x00); /* SCLK = low SDIO = high */ - udelay(10); - out8(I2C_BUS_DAT, 0x40); /* SCLK = high SDIO = high */ - udelay(15); - buf <<= 1; - buf = (in8(I2C_BUS_DAT) & 0x20) ? (buf | 0x01) : (buf & 0xFE); - out8(I2C_BUS_DAT, 0x00); /* SCLK = low SDIO = high */ - udelay(10); - } - return(buf); -} - -/*----------------------------------------------------------------------------*/ -/* - * Write one byte to EEPROM - * ___ ___ ___ ___ ___ ___ ___ ___ - * SCLK __/ \___/ \___/ \___/ \___/ \___/ \___/ \___/ \__ - * _______ _______ _______ _______ _______ _______ _______ ________ - * SDIO X_______X_______X_______X_______X_______X_______X_______X________ - * : 7 : 6 : 5 : 4 : 3 : 2 : 1 : 0 - */ -static void eepWriteByte (register unsigned char buf) -{ - register int i; - - (buf & 0x80) ? out8(I2C_BUS_DAT, 0x20) : out8(I2C_BUS_DAT, 0x00); /* SCLK = low SDIO = data */ - out8(I2C_BUS_DIR, 0x60); - - for (i = 7; i >= 0; i--) - { - (buf & 0x80) ? out8(I2C_BUS_DAT, 0x20) : out8(I2C_BUS_DAT, 0x00); /* SCLK=low SDIO=data */ - udelay(10); - (buf & 0x80) ? out8(I2C_BUS_DAT, 0x60) : out8(I2C_BUS_DAT, 0x40); /* SCLK=high SDIO=data */ - udelay(15); - (buf & 0x80) ? out8(I2C_BUS_DAT, 0x20) : out8(I2C_BUS_DAT, 0x00); /* SCLK=low SDIO=data */ - udelay(10); - buf <<= 1; - } -} - -/*----------------------------------------------------------------------------*/ -/* - * Read data acknowledge of EEPROM - * _______ - * SCLK ____/ \___ - * _______________ - * SDIO > - * : : ^ : - */ -static int eepReadAck (void) -{ - int retval; - - out8(I2C_BUS_DIR, 0x40); - out8(I2C_BUS_DAT, 0x00); /* SCLK = low SDIO = high */ - udelay(10); - out8(I2C_BUS_DAT, 0x40); /* SCLK = high SDIO = high */ - udelay(10); - retval = (in8(I2C_BUS_DAT) & 0x20) ? ERROR : 0; - udelay(10); - out8(I2C_BUS_DAT, 0x00); /* SCLK = low SDIO = high */ - udelay(10); - - return(retval); -} - -/*----------------------------------------------------------------------------*/ -/* - * Write data acknowledge to EEPROM - * _______ - * SCLK ____/ \___ - * - * SDIO >_______________ - * : : : - */ -static void eepWriteAck (unsigned char ack) -{ - ack ? out8(I2C_BUS_DAT, 0x20) : out8(I2C_BUS_DAT, 0x00); /* SCLK = low SDIO = ack */ - out8(I2C_BUS_DIR, 0x60); - udelay(10); - ack ? out8(I2C_BUS_DAT, 0x60) : out8(I2C_BUS_DAT, 0x40); /* SCLK = high SDIO = ack */ - udelay(15); - ack ? out8(I2C_BUS_DAT, 0x20) : out8(I2C_BUS_DAT, 0x00); /* SCLK = low SDIO = ack */ - udelay(10); -} - -/*----------------------------------------------------------------------------*/ -/* - * Read bytes from EEPROM - */ -int el_srom_load (addr, buf, cnt, device, block) -unsigned char addr; -unsigned char *buf; -int cnt; -unsigned char device; -unsigned char block; -{ - register int i; - - for (i=0;i<cnt;i++) - { - eepStart(); - eepWriteByte(0xA0 | device | block); - if (eepReadAck() == ERROR) - { - eepStop(); - return(ERROR); - } - eepWriteByte(addr++); - if (eepReadAck() == ERROR) - { - eepStop(); - return(ERROR); - } - eepStart(); - - eepWriteByte(0xA1 | device | block); - if (eepReadAck() == ERROR) - { - eepStop(); - return(ERROR); - } - - *buf++ = eepReadByte(); - eepWriteAck(1); - eepStop(); - - if ((addr == 0) && (i != (cnt-1))) /* is it the same block ? */ - { - if (block == FIRST_BLOCK) - block = SECOND_BLOCK; - else - return(ERROR); - } - } - return(cnt); -} - -/*----------------------------------------------------------------------------*/ -/* - * - * Write bytes to EEPROM - * - */ -int el_srom_store (addr, buf, cnt, device, block) -unsigned char addr, *buf, device, block; -int cnt; -{ - register int i, retVal; - - for (i=0;i<cnt;i++) - { - retVal = ERROR; - do - { - eepStart(); - eepWriteByte(0xA0 | device | block); - if ((retVal = eepReadAck()) == ERROR) - eepStop(); - } while (retVal == ERROR); - - eepWriteByte(addr++); - if (eepReadAck() == ERROR) return(ERROR); - - if ((addr == 0) && (i != (cnt-1))) /* is it the same block ? */ - { - if (block == FIRST_BLOCK) - block = SECOND_BLOCK; - else - return(ERROR); - } - - eepWriteByte(*buf++); - if (eepReadAck() == ERROR) - return(ERROR); - - eepStop(); - } - return(cnt); -} - -/*----------------------------------------------------------------------------*/ -/* - * calculate checksum for ELTEC revision srom - */ -unsigned long el_srom_checksum (ptr, size) -register unsigned char *ptr; -unsigned long size; -{ - u_long f, accu = 0; - u_int i; - u_char byte; - - for (; size; size--) - { - byte = *ptr++; - for (i = 8; i; i--) - { - f = ((byte & 1) ^ (accu & 1)) ? 0x84083001 : 0; - accu >>= 1; accu ^= f; - byte >>= 1; - } - } - return(accu); -} - -/*----------------------------------------------------------------------------*/ diff --git a/board/eltec/bab7xx/flash.c b/board/eltec/bab7xx/flash.c deleted file mode 100644 index 21ae098..0000000 --- a/board/eltec/bab7xx/flash.c +++ /dev/null @@ -1,512 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * 07-10-2002 Frank Gottschling: added 29F032 flash (ELPPC). - * fixed monitor protection part - * - * 09-18-2001 Andreas Heppel: Reduced the code in here to the usage - * of AMD's 29F040 and 29F016 flashes, since the BAB7xx does use - * any other. - */ - -#include <common.h> -#include <asm/processor.h> -#include <asm/pci_io.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); - -/*flash command address offsets*/ - -#define ADDR0 (0x555) -#define ADDR1 (0x2AA) -#define ADDR3 (0x001) - -#define FLASH_WORD_SIZE unsigned char - -/*----------------------------------------------------------------------------*/ - -unsigned long flash_init (void) -{ - unsigned long size1, size2; - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) - { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* initialise 1st flash */ - size1 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) - { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size1, size1<<20); - } - - /* initialise 2nd flash */ - size2 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]); - - if (flash_info[1].flash_id == FLASH_UNKNOWN) - { - printf ("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n", - size2, size2<<20); - } - - /* monitor protection ON by default */ - if (size1 == 512*1024) - { - (void)flash_protect(FLAG_PROTECT_SET, - FLASH_BASE0_PRELIM, - FLASH_BASE0_PRELIM+monitor_flash_len-1, - &flash_info[0]); - } - if (size2 == 512*1024) - { - (void)flash_protect(FLAG_PROTECT_SET, - FLASH_BASE1_PRELIM, - FLASH_BASE1_PRELIM+monitor_flash_len-1, - &flash_info[1]); - } - if (size2 == 4*1024*1024) - { - (void)flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE+monitor_flash_len-1, - &flash_info[1]); - } - - return (size1 + size2); -} - -/*----------------------------------------------------------------------------*/ - -void flash_print_info (flash_info_t *info) -{ - int i; - int k; - int size; - int erased; - volatile unsigned long *flash; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - flash_init(); - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf ("AMD "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case AMD_ID_F040B: - printf ("AM29F040B (4 Mbit)\n"); - break; - case AMD_ID_F016D: - printf ("AM29F016D (16 Mbit)\n"); - break; - case AMD_ID_F032B: - printf ("AM29F032B (32 Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - if (info->size >= (1 << 20)) { - printf (" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); - } else { - printf (" Size: %ld kB in %d Sectors\n", info->size >> 10, info->sector_count); - } - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - /* - * Check if whole sector is erased - */ - if (i != (info->sector_count-1)) - size = info->start[i+1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; - - erased = 1; - flash = (volatile unsigned long *)info->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - for (k=0; k<size; k++) { - if (*flash++ != 0xffffffff) { - erased = 0; - break; - } - } - - if ((i % 5) == 0) - printf ("\n "); - - printf (" %08lX%s%s", - info->start[i], - erased ? " E" : " ", - info->protect[i] ? "RO " : " "); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------------*/ -/* - * The following code cannot be run from FLASH! - */ -ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong vendor, devid; - ulong base = (ulong)addr; - volatile unsigned char *caddr = (unsigned char *)addr; - -#ifdef DEBUG - printf("flash_get_size for address 0x%lx: \n", (unsigned long)caddr); -#endif - - /* Write auto select command: read Manufacturer ID */ - caddr[0] = 0xF0; /* reset bank */ - udelay(10); - - eieio(); - caddr[0x555] = 0xAA; - udelay(10); - caddr[0x2AA] = 0x55; - udelay(10); - caddr[0x555] = 0x90; - - udelay(10); - - vendor = caddr[0]; - devid = caddr[1]; - -#ifdef DEBUG - printf("Manufacturer: 0x%lx\n", vendor); -#endif - - vendor &= 0xff; - devid &= 0xff; - - /* We accept only two AMD types */ - switch (vendor) { - case (FLASH_WORD_SIZE)AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - switch (devid) { - case (FLASH_WORD_SIZE)AMD_ID_F040B: - info->flash_id |= AMD_ID_F040B; - info->sector_count = 8; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - case (FLASH_WORD_SIZE)AMD_ID_F016D: - info->flash_id |= AMD_ID_F016D; - info->sector_count = 32; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (FLASH_WORD_SIZE)AMD_ID_F032B: - info->flash_id |= AMD_ID_F032B; - info->sector_count = 64; - info->size = 0x00400000; - break; /* => 4 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - -#ifdef DEBUG - printf("flash id 0x%lx; sector count 0x%x, size 0x%lx\n", info->flash_id, info->sector_count, info->size); -#endif - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* sector base address */ - info->start[i] = base + i * (info->size / info->sector_count); - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - caddr = (volatile unsigned char *)(info->start[i]); - info->protect[i] = caddr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - caddr = (volatile unsigned char *)info->start[0]; - caddr[0] = 0xF0; /* reset bank */ - } - - return (info->size); -} - -/*----------------------------------------------------------------------------*/ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - int rc = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (FLASH_WORD_SIZE *)(info->start[sect]); - if (info->flash_id & FLASH_MAN_SST) { - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */ - udelay(30000); /* wait 30 ms */ - } - else - addr[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */ - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (FLASH_WORD_SIZE *)(info->start[l_sect]); - while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - serial_putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (FLASH_WORD_SIZE *)info->start[0]; - addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ - - printf (" done\n"); - return rc; -} - -/*----------------------------------------------------------------------------*/ -/* - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------------*/ -/* Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]); - volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest; - volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data; - ulong start; - int flag; - int i; - - /* Check if Flash is (sufficiently) erased */ - if ((*((volatile FLASH_WORD_SIZE *)dest) & - (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++) - { - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00A000A0; - - dest2[i] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) != - (data2[i] & (FLASH_WORD_SIZE)0x00800080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - } - - return (0); -} - -/*----------------------------------------------------------------------------*/ diff --git a/board/eltec/bab7xx/l2cache.c b/board/eltec/bab7xx/l2cache.c deleted file mode 100644 index 787704f..0000000 --- a/board/eltec/bab7xx/l2cache.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * (C) Copyright 2002 ELTEC Elektronik AG - * Frank Gottschling <fgottschling@eltec.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -#if defined(CONFIG_SYS_L2_BAB7xx) - -#include <pci.h> -#include <mpc106.h> -#include <asm/processor.h> - -/* defines L2CR register for MPC750 */ - -#define L2CR_E 0x80000000 -#define L2CR_256K 0x10000000 -#define L2CR_512K 0x20000000 -#define L2CR_1024K 0x30000000 -#define L2CR_I 0x00200000 -#define L2CR_SL 0x00008000 -#define L2CR_IP 0x00000001 - -/*----------------------------------------------------------------------------*/ - -static int dummy (int dummy) -{ - return (dummy+1); -} - -/*----------------------------------------------------------------------------*/ - -int l2_cache_enable (int l2control) -{ - if (l2control) /* BAB750 */ - { - mtspr(SPRN_L2CR, l2control); - mtspr(SPRN_L2CR, (l2control | L2CR_I)); - while (mfspr(SPRN_L2CR) & L2CR_IP) - ; - mtspr(SPRN_L2CR, (l2control | L2CR_E)); - return (0); - } - else /* BAB740 */ - { - int picr1, picr2, mask; - int picr2CacheSize, cacheSize; - int *d; - int devbusfn; - u32 reg32; - - devbusfn = pci_find_device(PCI_VENDOR_ID_MOTOROLA, - PCI_DEVICE_ID_MOTOROLA_MPC106, 0); - if (devbusfn == -1) - return (-1); - - pci_read_config_dword (devbusfn, PCI_PICR2, ®32); - reg32 &= ~PICR2_L2_EN; - pci_write_config_dword (devbusfn, PCI_PICR2, reg32); - - /* cache size */ - if (*(volatile unsigned char *) (CONFIG_SYS_ISA_IO + 0x220) & 0x04) - { - /* cache size is 512 KB */ - picr2CacheSize = PICR2_L2_SIZE_512K; - cacheSize = 0x80000; - } - else - { - /* cache size is 256 KB */ - picr2CacheSize = PICR2_L2_SIZE_256K; - cacheSize = 0x40000; - } - - /* setup PICR1 */ - mask = - ~(PICR1_CF_BREAD_WS(1) | - PICR1_CF_BREAD_WS(2) | - PICR1_CF_CBA(0xff) | - PICR1_CF_CACHE_1G | - PICR1_CF_DPARK | - PICR1_CF_APARK | - PICR1_CF_L2_CACHE_MASK); - - picr1 = - (PICR1_CF_CBA(0x3f) | - PICR1_CF_CACHE_1G | - PICR1_CF_APARK | - PICR1_CF_DPARK | - PICR1_CF_L2_COPY_BACK); /* PICR1_CF_L2_WRITE_THROUGH */ - - pci_read_config_dword (devbusfn, PCI_PICR1, ®32); - reg32 &= mask; - reg32 |= picr1; - pci_write_config_dword (devbusfn, PCI_PICR1, reg32); - - /* - * invalidate all L2 cache - */ - picr2 = - (PICR2_CF_INV_MODE | - PICR2_CF_HIT_HIGH | - PICR2_CF_MOD_HIGH | - PICR2_CF_L2_HIT_DELAY(1) | - PICR2_CF_APHASE_WS(1) | - picr2CacheSize); - - pci_write_config_dword (devbusfn, PCI_PICR2, picr2); - - /* - * dummy transactions - */ - for (d=0; d<(int *)(2*cacheSize); d++) - dummy(*d); - - pci_write_config_dword (devbusfn, PCI_PICR2, - (picr2 | PICR2_CF_FLUSH_L2)); - - /* setup PICR2 */ - picr2 = - (PICR2_CF_FAST_CASTOUT | - PICR2_CF_WDATA | - PICR2_CF_ADDR_ONLY_DISABLE | - PICR2_CF_HIT_HIGH | - PICR2_CF_MOD_HIGH | - PICR2_L2_UPDATE_EN | - PICR2_L2_EN | - PICR2_CF_APHASE_WS(1) | - PICR2_CF_DATA_RAM_PBURST | - PICR2_CF_L2_HIT_DELAY(1) | - PICR2_CF_SNOOP_WS(2) | - picr2CacheSize); - - pci_write_config_dword (devbusfn, PCI_PICR2, picr2); - } - return (0); -} - -/*----------------------------------------------------------------------------*/ - -#endif /* (CONFIG_SYS_L2_BAB7xx) */ diff --git a/board/eltec/bab7xx/misc.c b/board/eltec/bab7xx/misc.c deleted file mode 100644 index d05e226..0000000 --- a/board/eltec/bab7xx/misc.c +++ /dev/null @@ -1,546 +0,0 @@ -/* - * (C) Copyright 2002 ELTEC Elektronik AG - * Frank Gottschling <fgottschling@eltec.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* includes */ -#include <common.h> -#include <linux/ctype.h> -#include <pci.h> -#include <net.h> -#include <mpc106.h> -#include <w83c553f.h> -#include "srom.h" - -/* imports */ -extern int l2_cache_enable (int l2control); -extern void *nvram_read (void *dest, const short src, size_t count); -extern void nvram_write (short dest, const void *src, size_t count); - -/* globals */ -unsigned int ata_reset_time = 60; -unsigned int scsi_reset_time = 10; -unsigned int eltec_board; - -/* BAB750 uses SYM53C875(default) and BAB740 uses SYM53C860 - * values fixed after board identification - */ -unsigned short scsi_dev_id = PCI_DEVICE_ID_NCR_53C875; -unsigned int scsi_max_scsi_id = 15; -unsigned char scsi_sym53c8xx_ccf = 0x13; - -/*----------------------------------------------------------------------------*/ -/* - * handle sroms on BAB740/750 - * fix ether address - * L2 cache initialization - * ide dma control - */ -int misc_init_r (void) -{ - revinfo eerev; - char *ptr; - u_int i, l, initSrom, copyNv; - char buf[256]; - char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0, - 0, 0, 0, 0, 10, 11, 12, 13, 14, 15 }; - pci_dev_t bdf; - - char sromSYM[] = { -#ifdef TULIP_BUG - /* 10BaseT, 100BaseTx no full duplex modes */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x04, 0x01, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x08, - 0x02, 0x86, 0x02, 0x00, 0xaf, 0x08, 0xa5, 0x00, - 0x88, 0x04, 0x03, 0x27, 0x08, 0x25, 0x00, 0x61, - 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xe8 -#endif - /* 10BaseT, 10BaseT-FD, 100BaseTx, 100BaseTx-FD */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x04, 0x01, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x08, - 0x04, 0x86, 0x02, 0x00, 0xaf, 0x08, 0xa5, 0x00, - 0x86, 0x02, 0x04, 0xaf, 0x08, 0xa5, 0x00, 0x88, - 0x04, 0x03, 0x27, 0x08, 0x25, 0x00, 0x61, 0x80, - 0x88, 0x04, 0x05, 0x27, 0x08, 0x25, 0x00, 0x61, - 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x77 - }; - - char sromMII[] = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x04, 0x01, 0x00, 0x00, 0x5b, 0x00, - 0x2e, 0x4d, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x08, - 0x01, 0x95, 0x03, 0x00, 0x00, 0x04, 0x01, 0x08, - 0x00, 0x00, 0x02, 0x08, 0x02, 0x00, 0x00, 0x78, - 0xe0, 0x01, 0x00, 0x50, 0x00, 0x18, 0x80, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xde, 0x41 - }; - - /* - * Check/Remake revision info - */ - initSrom = 0; - copyNv = 0; - - /* read out current revision srom contens */ - el_srom_load (0x0000, (u_char*)&eerev, sizeof(revinfo), - SECOND_DEVICE, FIRST_BLOCK); - - /* read out current nvram shadow image */ - nvram_read (buf, CONFIG_SYS_NV_SROM_COPY_ADDR, CONFIG_SYS_SROM_SIZE); - - if (strcmp (eerev.magic, "ELTEC") != 0) - { - /* srom is not initialized -> create a default revision info */ - for (i = 0, ptr = (char *)&eerev; i < sizeof(revinfo); i++) - *ptr++ = 0x00; - strcpy(eerev.magic, "ELTEC"); - eerev.revrev[0] = 1; - eerev.revrev[1] = 0; - eerev.size = 0x00E0; - eerev.category[0] = 0x01; - - /* node id from dead e128 as default */ - eerev.etheraddr[0] = 0x00; - eerev.etheraddr[1] = 0x00; - eerev.etheraddr[2] = 0x5B; - eerev.etheraddr[3] = 0x00; - eerev.etheraddr[4] = 0x2E; - eerev.etheraddr[5] = 0x4D; - - /* cache config word for bab750 */ - *(int*)&eerev.res[0] = CLK2P0TO1_1MB_PB_0P5DH; - - initSrom = 1; /* force dialog */ - copyNv = 1; /* copy to nvram */ - } - - if ((copyNv == 0) && (el_srom_checksum((u_char*)&eerev, CONFIG_SYS_SROM_SIZE) != - el_srom_checksum((u_char*)buf, CONFIG_SYS_SROM_SIZE))) - { - printf ("Invalid revision info copy in nvram !\n"); - printf ("Press key:\n <c> to copy current revision info to nvram.\n"); - printf (" <r> to reenter revision info.\n"); - printf ("=> "); - if (0 != readline (NULL)) - { - switch ((char)toupper(console_buffer[0])) - { - case 'C': - copyNv = 1; - break; - case 'R': - copyNv = 1; - initSrom = 1; - break; - } - } - } - - if (initSrom) - { - memcpy (buf, &eerev.revision[0][0], 14); /* save all revision info */ - printf ("Enter revision number (0-9): %c ", eerev.revision[0][0]); - if (0 != readline (NULL)) - { - eerev.revision[0][0] = (char)toupper(console_buffer[0]); - memcpy (&eerev.revision[1][0], buf, 12); /* shift rest of rev info */ - } - - printf ("Enter revision character (A-Z): %c ", eerev.revision[0][1]); - if (1 == readline (NULL)) - { - eerev.revision[0][1] = (char)toupper(console_buffer[0]); - } - - printf ("Enter board name (V-XXXX-XXXX): %s ", (char *)&eerev.board); - if (11 == readline (NULL)) - { - for (i=0; i<11; i++) - eerev.board[i] = (char)toupper(console_buffer[i]); - eerev.board[11] = '\0'; - } - - printf ("Enter serial number: %s ", (char *)&eerev.serial ); - if (6 == readline (NULL)) - { - for (i=0; i<6; i++) - eerev.serial[i] = console_buffer[i]; - eerev.serial[6] = '\0'; - } - - printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ", - eerev.etheraddr[0], eerev.etheraddr[1], - eerev.etheraddr[2], eerev.etheraddr[3], - eerev.etheraddr[4], eerev.etheraddr[5]); - if (12 == readline (NULL)) - { - for (i=0; i<12; i+=2) - eerev.etheraddr[i>>1] = (char)(16*hex[toupper(console_buffer[i])-'0'] + - hex[toupper(console_buffer[i+1])-'0']); - } - - l = strlen ((char *)&eerev.text); - printf("Add to text section (max 64 chr): %s ", (char *)&eerev.text ); - if (0 != readline (NULL)) - { - for (i = l; i<63; i++) - eerev.text[i] = console_buffer[i-l]; - eerev.text[63] = '\0'; - } - - if (strstr ((char *)&eerev.board, "75") != NULL) - eltec_board = 750; - else - eltec_board = 740; - - if (eltec_board == 750) - { - if (CPU_TYPE == CPU_TYPE_750) - *(int*)&eerev.res[0] = CLK2P0TO1_1MB_PB_0P5DH; - else - *(int*)&eerev.res[0] = CLK2P5TO1_1MB_PB_0P5DH; - - printf("Enter L2Cache config word with leading zero (HEX): %08X ", - *(int*)&eerev.res[0] ); - if (0 != readline (NULL)) - { - for (i=0; i<7; i+=2) - { - eerev.res[i>>1] = - (char)(16*hex[toupper(console_buffer[i])-'0'] + - hex[toupper(console_buffer[i+1])-'0']); - } - } - - /* prepare network eeprom */ - sromMII[20] = eerev.etheraddr[0]; - sromMII[21] = eerev.etheraddr[1]; - sromMII[22] = eerev.etheraddr[2]; - sromMII[23] = eerev.etheraddr[3]; - sromMII[24] = eerev.etheraddr[4]; - sromMII[25] = eerev.etheraddr[5]; - printf("\nSRom: Writing DEC21143 MII info .. "); - - if (dc_srom_store ((u_short *)sromMII) == -1) - printf("FAILED\n"); - else - printf("OK\n"); - } - - if (eltec_board == 740) - { - *(int *)&eerev.res[0] = 0; - sromSYM[20] = eerev.etheraddr[0]; - sromSYM[21] = eerev.etheraddr[1]; - sromSYM[22] = eerev.etheraddr[2]; - sromSYM[23] = eerev.etheraddr[3]; - sromSYM[24] = eerev.etheraddr[4]; - sromSYM[25] = eerev.etheraddr[5]; - printf("\nSRom: Writing DEC21143 SYM info .. "); - - if (dc_srom_store ((u_short *)sromSYM) == -1) - printf("FAILED\n"); - else - printf("OK\n"); - } - - /* update CRC */ - eerev.crc = el_srom_checksum((u_char *)eerev.board, eerev.size); - - /* write new values */ - printf("\nSRom: Writing revision info ...... "); - if (el_srom_store((BLOCK_SIZE-sizeof(revinfo)), (u_char *)&eerev, - sizeof(revinfo), SECOND_DEVICE, FIRST_BLOCK) == -1) - printf("FAILED\n\n"); - else - printf("OK\n\n"); - - /* write new values as shadow image to nvram */ - nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *)&eerev, CONFIG_SYS_SROM_SIZE); - - } /*if (initSrom) */ - - /* copy current values as shadow image to nvram */ - if (initSrom == 0 && copyNv == 1) - nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *)&eerev, CONFIG_SYS_SROM_SIZE); - - /* update environment */ - sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x", - eerev.etheraddr[0], eerev.etheraddr[1], - eerev.etheraddr[2], eerev.etheraddr[3], - eerev.etheraddr[4], eerev.etheraddr[5]); - setenv ("ethaddr", buf); - - /* print actual board identification */ - printf("Ident: %s Ser %s Rev %c%c\n", - eerev.board, (char *)&eerev.serial, - eerev.revision[0][0], eerev.revision[0][1]); - - /* global board ident */ - if (strstr ((char *)&eerev.board, "75") != NULL) - eltec_board = 750; - else - eltec_board = 740; - - /* - * L2 cache configuration - */ -#if defined(CONFIG_SYS_L2_BAB7xx) - ptr = getenv("l2cache"); - if (*ptr == '0') - { - printf ("Cache: L2 NOT activated on BAB%d\n", eltec_board); - } - else - { - printf ("Cache: L2 activated on BAB%d\n", eltec_board); - l2_cache_enable(*(int*)&eerev.res[0]); - } -#endif - - /* - * Reconfig ata reset timeout from environment - */ - if ((ptr = getenv ("ata_reset_time")) != NULL) - { - ata_reset_time = (int)simple_strtoul (ptr, NULL, 10); - } - else - { - sprintf (buf, "%d", ata_reset_time); - setenv ("ata_reset_time", buf); - } - - /* - * Reconfig scsi reset timeout from environment - */ - if ((ptr = getenv ("scsi_reset_time")) != NULL) - { - scsi_reset_time = (int)simple_strtoul (ptr, NULL, 10); - } - else - { - sprintf (buf, "%d", scsi_reset_time); - setenv ("scsi_reset_time", buf); - } - - - if ((bdf = pci_find_device(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, 0)) > 0) - { - if (pci_find_device(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C860, 0) > 0) - { - /* BAB740 with SCSI=IRQ 11; SCC=IRQ 9; no IDE; NCR860 at 80 MHz */ - scsi_dev_id = PCI_DEVICE_ID_NCR_53C860; - scsi_max_scsi_id = 7; - scsi_sym53c8xx_ccf = 0x15; - pci_write_config_byte (bdf, WINBOND_IDEIRCR, 0xb0); - } - - if ((ptr = getenv ("ide_dma_off")) != NULL) - { - u_long dma_off = simple_strtoul (ptr, NULL, 10); - /* - * setup user defined registers - * s.a. linux/drivers/ide/sl82c105.c - */ - bdf |= PCI_BDF(0,0,1); /* ide user reg at bdf function 1 */ - if (dma_off & 1) - { - pci_write_config_byte (bdf, 0x46, 1); - printf("IDE: DMA off flag set: Bus 0 : Dev 0\n"); - } - if (dma_off & 2) - { - pci_write_config_byte (bdf, 0x4a, 1); - printf("IDE: DMA off flag set: Bus 0 : Dev 1\n"); - } - if (dma_off & 4) - { - pci_write_config_byte (bdf, 0x4e, 1); - printf("IDE: DMA off flag set: Bus 1 : Dev 0\n"); - } - if (dma_off & 8) - { - pci_write_config_byte (bdf, 0x52, 1); - printf("IDE: DMA off flag set: Bus 1 : Dev 1\n"); - } - } - } - return (0); -} - -/*----------------------------------------------------------------------------*/ -/* - * BAB740 uses KENDIN KS8761 modem chip with not common setup values - */ -#ifdef CONFIG_TULIP_SELECT_MEDIA - -/* Register bits. - */ -#define BMR_SWR 0x00000001 /* Software Reset */ -#define STS_TS 0x00700000 /* Transmit Process State */ -#define STS_RS 0x000e0000 /* Receive Process State */ -#define OMR_ST 0x00002000 /* Start/Stop Transmission Command */ -#define OMR_SR 0x00000002 /* Start/Stop Receive */ -#define OMR_PS 0x00040000 /* Port Select */ -#define OMR_SDP 0x02000000 /* SD Polarity - MUST BE ASSERTED */ -#define OMR_PM 0x00000080 /* Pass All Multicast */ -#define OMR_PR 0x00000040 /* Promiscuous Mode */ -#define OMR_PCS 0x00800000 /* PCS Function */ -#define OMR_TTM 0x00400000 /* Transmit Threshold Mode */ - -/* Ethernet chip registers. - */ -#define DE4X5_BMR 0x000 /* Bus Mode Register */ -#define DE4X5_TPD 0x008 /* Transmit Poll Demand Reg */ -#define DE4X5_RRBA 0x018 /* RX Ring Base Address Reg */ -#define DE4X5_TRBA 0x020 /* TX Ring Base Address Reg */ -#define DE4X5_STS 0x028 /* Status Register */ -#define DE4X5_OMR 0x030 /* Operation Mode Register */ -#define DE4X5_SISR 0x060 /* SIA Status Register */ -#define DE4X5_SICR 0x068 /* SIA Connectivity Register */ -#define DE4X5_TXRX 0x070 /* SIA Transmit and Receive Register */ -#define DE4X5_GPPR 0x078 /* General Purpose Port register */ -#define DE4X5_APROM 0x048 /* Ethernet Address PROM */ - -/*----------------------------------------------------------------------------*/ - -static int INL(struct eth_device* dev, u_long addr) -{ - return le32_to_cpu(*(volatile u_long *)(addr + dev->iobase)); -} - -/*----------------------------------------------------------------------------*/ - -static void OUTL(struct eth_device* dev, int command, u_long addr) -{ - *(volatile u_long *)(addr + dev->iobase) = cpu_to_le32(command); -} - -/*----------------------------------------------------------------------------*/ - -static void media_reg_init ( - struct eth_device* dev, - u32 csr14, - u32 csr15_dir, - u32 csr15_v0, - u32 csr15_v1, - u32 csr6 ) -{ - OUTL(dev, 0, DE4X5_OMR); /* CSR6 */ - udelay(10 * 1000); - OUTL(dev, 0, DE4X5_SICR); /* CSR13 */ - OUTL(dev, 1, DE4X5_SICR); /* CSR13 */ - udelay(10 * 1000); - OUTL(dev, csr14, DE4X5_TXRX); /* CSR14 */ - OUTL(dev, csr15_dir, DE4X5_GPPR); /* CSR15 */ - OUTL(dev, csr15_v0, DE4X5_GPPR); /* CSR15 */ - udelay(10 * 1000); - OUTL(dev, csr15_v1, DE4X5_GPPR); /* CSR15 */ - OUTL(dev, 0x00000301, DE4X5_SISR); /* CSR12 */ - OUTL(dev, csr6, DE4X5_OMR); /* CSR6 */ -} - -/*----------------------------------------------------------------------------*/ - -void dc21x4x_select_media(struct eth_device* dev) -{ - int i, status, ext; - extern unsigned int eltec_board; - - if (eltec_board == 740) - { - printf("SYM media select "); /* BAB740 */ - /* start autoneg. with 10 mbit */ - media_reg_init (dev, 0x3ffff, 0x08af0008, 0x00a10008, 0x00a50008, 0x02400080); - ext = status = 0; - for (i=0; i<2000+ext; i++) - { - status = INL(dev, DE4X5_SISR); - udelay(1000); - if (status & 0x2000) ext = 2000; - if ((status & 0x7000) == 0x5000) break; - } - - /* autoneg. ok -> 100MB FD */ - if ((status & 0x0100f000) == 0x0100d000) - { - media_reg_init (dev, 0x37f7f, 0x08270008, 0x00210008, 0x00250008, 0x03c40280); - printf("100baseTx-FD\n"); - } - /* autoneg. ok -> 100MB HD */ - else if ((status & 0x0080f000) == 0x0080d000) - { - media_reg_init (dev, 0x17f7f, 0x08270008, 0x00210008, 0x00250008, 0x03c40080); - printf("100baseTx\n"); - } - /* autoneg. ok -> 10MB FD */ - else if ((status & 0x0040f000) == 0x0040d000) - { - media_reg_init (dev, 0x07f7f, 0x08af0008, 0x00a10008, 0x00a50008, 0x02400280); - printf("10baseT-FD\n"); - } - /* autoneg. fail -> 10MB HD */ - else - { - media_reg_init (dev, 0x7f7f, 0x08af0008, 0x00a10008, 0x00a50008, - (OMR_SDP | OMR_TTM | OMR_PM)); - printf("10baseT\n"); - } - } - else - { - printf("MII media selected\n"); /* BAB750 */ - OUTL(dev, OMR_SDP | OMR_PS | OMR_PM, DE4X5_OMR); /* CSR6 */ - } -} -#endif /* CONFIG_TULIP_SELECT_MEDIA */ - -/*---------------------------------------------------------------------------*/ diff --git a/board/eltec/bab7xx/pci.c b/board/eltec/bab7xx/pci.c deleted file mode 100644 index 38dd498..0000000 --- a/board/eltec/bab7xx/pci.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * (C) Copyright 2002 ELTEC Elektronik AG - * Frank Gottschling <fgottschling@eltec.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * PCI initialisation for the MPC10x. - */ - -#include <common.h> -#include <pci.h> -#include <mpc106.h> - -#ifdef CONFIG_PCI - -struct pci_controller local_hose; - -void pci_init_board(void) -{ - struct pci_controller* hose = (struct pci_controller *)&local_hose; - u32 reg32; - u16 reg16; - - hose->first_busno = 0; - hose->last_busno = 0xff; - - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - /* - * Attention: pci_hose_phys_to_bus() failes in address compare, - * so we need (CONFIG_SYS_PCI_MEMORY_SIZE-1) - */ - CONFIG_SYS_PCI_MEMORY_SIZE-1, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - /* PCI memory space */ - pci_set_region(hose->regions + 1, - CONFIG_SYS_PCI_MEM_BUS, - CONFIG_SYS_PCI_MEM_PHYS, - CONFIG_SYS_PCI_MEM_SIZE, - PCI_REGION_MEM); - - /* ISA/PCI memory space */ - pci_set_region(hose->regions + 2, - CONFIG_SYS_ISA_MEM_BUS, - CONFIG_SYS_ISA_MEM_PHYS, - CONFIG_SYS_ISA_MEM_SIZE, - PCI_REGION_MEM); - - /* PCI I/O space */ - pci_set_region(hose->regions + 3, - CONFIG_SYS_PCI_IO_BUS, - CONFIG_SYS_PCI_IO_PHYS, - CONFIG_SYS_PCI_IO_SIZE, - PCI_REGION_IO); - - /* ISA/PCI I/O space */ - pci_set_region(hose->regions + 4, - CONFIG_SYS_ISA_IO_BUS, - CONFIG_SYS_ISA_IO_PHYS, - CONFIG_SYS_ISA_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = 5; - - pci_setup_indirect(hose, - MPC106_REG_ADDR, - MPC106_REG_DATA); - - pci_register_hose(hose); - - hose->last_busno = pci_hose_scan(hose); - - /* Initialises the MPC10x PCI Configuration regs. */ - pci_read_config_dword (PCI_BDF(0,0,0), PCI_PICR2, ®32); - reg32 |= PICR2_CF_SNOOP_WS(3) | - PICR2_CF_FLUSH_L2 | - PICR2_CF_L2_HIT_DELAY(3) | - PICR2_CF_APHASE_WS(3); - reg32 &= ~(PICR2_L2_EN | PICR2_L2_UPDATE_EN); - pci_write_config_dword (PCI_BDF(0,0,0), PCI_PICR2, reg32); - - pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16); - - /* Clear non-reserved bits in status register */ - pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff); - - pci_read_config_dword (PCI_BDF(0,0,0), PCI_PICR1, ®32); - reg32 |= PICR1_CF_CBA(63) | - PICR1_CF_BREAD_WS(2) | - PICR1_MCP_EN | - PICR1_CF_DPARK | - PICR1_PROC_TYPE_604 | - PICR1_CF_LOOP_SNOOP | - PICR1_CF_APARK; - pci_write_config_dword (PCI_BDF(0,0,0), PCI_PICR1, reg32); -} - -#endif /* CONFIG_PCI */ diff --git a/board/eltec/bab7xx/srom.h b/board/eltec/bab7xx/srom.h deleted file mode 100644 index 504b742..0000000 --- a/board/eltec/bab7xx/srom.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * (C) Copyright 2002 ELTEC Elektronik AG - * Frank Gottschling <fgottschling@eltec.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* common srom defs */ -#define FIRST_DEVICE 0x00 -#define SECOND_DEVICE 0x04 -#define FIRST_BLOCK 0x00 -#define SECOND_BLOCK 0x02 -#define BLOCK_SIZE 0x100 -#define ERROR (-1) - -#define CLK2P0TO1_1MB_PB_0P5DH 0x79000100 -#define CLK2P5TO1_1MB_PB_0P5DH 0x7B000100 - -#define CPU_TYPE_740 0x08 -#define CPU_TYPE_750 0x08 -#define CPU_TYPE ((get_pvr()>>16)&0xffff) - -#define ABS(x) ((x<0)?-x:x) -#define SROM_SHORT(pX) (*(u8 *)(pX) | *((u8 *)(pX)+1) << 8) - -/* bab7xx ELTEC srom */ -#define I2C_BUS_DAT (CONFIG_SYS_ISA_IO + 0x220) -#define I2C_BUS_DIR (CONFIG_SYS_ISA_IO + 0x221) - -/* srom at mpc107 */ -#define MPC107_I2CADDR (mpc107_eumb_addr + 0x3000) /* address */ -#define MPC107_I2CFDR (mpc107_eumb_addr + 0x3004) /* freq divider */ -#define MPC107_I2CCR (mpc107_eumb_addr + 0x3008) /* control */ -#define MPC107_I2CSR (mpc107_eumb_addr + 0x300c) /* status */ -#define MPC107_I2CDR (mpc107_eumb_addr + 0x3010) /* data */ -#define MPC107_I2C_TIMEOUT 10000000 - -/* i82559 */ -#define EE_ADDR_BITS 6 -#define EE_SIZE 0x40 /* 0x40 words */ -#define EE_CHECKSUM 0xBABA - -/* dc21143 */ -#define DEC_SROM_SIZE 128 - - -/* - * structure of revision srom - */ -typedef struct { - char magic[8]; /* 000 - Magic number */ - char revrev[2]; /* 008 - Revision of structure */ - unsigned short size; /* 00A - Size of CRC area */ - unsigned long crc; /* 00C - CRC */ - char board[16]; /* 010 - Board Revision information */ - char option[4][16]; /* 020 - Option Revision information */ - char serial[8]; /* 060 - Board serial number */ - char etheraddr[6]; /* 068 - Ethernet node addresse */ - char reserved[2]; /* 06E - Reserved */ - char revision[7][2]; /* 070 - Revision codes */ - char category[2]; /* 07E - Category codes */ - char text[64]; /* 080 - Text field */ - char res[64]; /* 0C0 - Reserved */ -} revinfo; - -unsigned long el_srom_checksum (unsigned char *ptr, unsigned long size); -int el_srom_load (unsigned char addr, unsigned char *buf, int cnt, - unsigned char device, unsigned char block); -int el_srom_store (unsigned char addr, unsigned char *buf, int cnt, - unsigned char device, unsigned char block); - -int mpc107_i2c_init (unsigned long eumb_addr, unsigned long divider); -int mpc107_i2c_read_byte (unsigned char device, unsigned char block, unsigned char offset); -int mpc107_i2c_write_byte (unsigned char device, unsigned char block, - unsigned char offset, unsigned char val); -int mpc107_srom_load (unsigned char addr, unsigned char *pBuf, int cnt, - unsigned char device, unsigned char block); -int mpc107_srom_store (unsigned char addr, unsigned char *pBuf, int cnt, - unsigned char device, unsigned char block); - -int dc_srom_load (unsigned short *dest); -int dc_srom_store (unsigned short *src); - -unsigned short eepro100_srom_checksum (unsigned short *sromdata); -void eepro100_srom_load (unsigned short *destination); -int eepro100_srom_store (unsigned short *source); |