diff options
Diffstat (limited to 'board/eltec/mhpc')
| -rw-r--r-- | board/eltec/mhpc/Kconfig | 12 | ||||
| -rw-r--r-- | board/eltec/mhpc/MAINTAINERS | 6 | ||||
| -rw-r--r-- | board/eltec/mhpc/Makefile | 8 | ||||
| -rw-r--r-- | board/eltec/mhpc/flash.c | 414 | ||||
| -rw-r--r-- | board/eltec/mhpc/mhpc.c | 465 | ||||
| -rw-r--r-- | board/eltec/mhpc/u-boot.lds.debug | 121 |
6 files changed, 0 insertions, 1026 deletions
diff --git a/board/eltec/mhpc/Kconfig b/board/eltec/mhpc/Kconfig deleted file mode 100644 index 5a4c884..0000000 --- a/board/eltec/mhpc/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_MHPC - -config SYS_BOARD - default "mhpc" - -config SYS_VENDOR - default "eltec" - -config SYS_CONFIG_NAME - default "MHPC" - -endif diff --git a/board/eltec/mhpc/MAINTAINERS b/board/eltec/mhpc/MAINTAINERS deleted file mode 100644 index 4d84a35..0000000 --- a/board/eltec/mhpc/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MHPC BOARD -M: Frank Gottschling <fgottschling@eltec.de> -S: Maintained -F: board/eltec/mhpc/ -F: include/configs/MHPC.h -F: configs/MHPC_defconfig diff --git a/board/eltec/mhpc/Makefile b/board/eltec/mhpc/Makefile deleted file mode 100644 index f3fcc2f..0000000 --- a/board/eltec/mhpc/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = mhpc.o flash.o diff --git a/board/eltec/mhpc/flash.c b/board/eltec/mhpc/flash.c deleted file mode 100644 index ad89df9..0000000 --- a/board/eltec/mhpc/flash.c +++ /dev/null @@ -1,414 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc8xx.h> -#include <linux/byteorder/swab.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Protection Flags: - */ -#define FLAG_PROTECT_SET 0x01 -#define FLAG_PROTECT_CLEAR 0x02 - -/* Board support for 1 or 2 flash devices */ -#undef FLASH_PORT_WIDTH32 -#define FLASH_PORT_WIDTH16 - -#ifdef FLASH_PORT_WIDTH16 -#define FLASH_PORT_WIDTH ushort -#define FLASH_PORT_WIDTHV vu_short -#define SWAP(x) __swab16(x) -#else -#define FLASH_PORT_WIDTH ulong -#define FLASH_PORT_WIDTHV vu_long -#define SWAP(x) __swab32(x) -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (FPW *addr, flash_info_t *info); -static int write_data (flash_info_t *info, ulong dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size_b0; - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - size_b0 = flash_get_size((FPW *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0<<20); - } - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V; - - /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size((FPW *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - /* monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE+monitor_flash_len-1, - &flash_info[0]); - - flash_info[0].size = size_b0; - - return (size_b0); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - return; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000); - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: printf ("INTEL "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F640J5 : - printf ("28F640J5 \n"); break; - default: printf ("Unknown Chip Type=0x%lXh\n", - info->flash_id & FLASH_TYPEMASK); break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (FPW *addr, flash_info_t *info) -{ - FPW value; - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = (FPW)0xAA00AA00; - addr[0x2AAA] = (FPW)0x55005500; - addr[0x5555] = (FPW)0x90009000; - - value = SWAP(addr[0]); - - switch (value) { - case (FPW)INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW)0xFF00FF00; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - value = SWAP(addr[1]); /* device ID no swap !*/ - - switch (value) { - case (FPW)INTEL_ID_28F640J5 : - info->flash_id += FLASH_28F640J5 ; - info->sector_count = 64; - info->size = 0x00800000; - break; /* => 8 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - addr[0] = (FPW)0xFF00FF00; /* restore read mode */ - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong type, start, now, last; - int rc = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - start = get_timer (0); - last = start; - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *)(info->start[sect]); - FPW status; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - *addr = (FPW)0x50005000; /* clear status register */ - *addr = (FPW)0x20002000; /* erase setup */ - *addr = (FPW)0xD000D000; /* erase confirm */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - while (((status = SWAP(*addr)) & (FPW)0x00800080) != (FPW)0x00800080) { - if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = (FPW)0xB000B000; /* suspend erase */ - *addr = (FPW)0xFF00FF00; /* reset to read mode */ - rc = 1; - break; - } - - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - - *addr = (FPW)0xFF00FF00; /* reset to read mode */ - printf (" done\n"); - } - } - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } -/* get lower word aligned address */ -#ifdef FLASH_PORT_WIDTH16 - wp = (addr & ~1); - port_width = 2; -#else - wp = (addr & ~3); - port_width = 4; -#endif - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) - data = (data << 8) | (*(uchar *)cp); - - for (; i<port_width && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_data(info, wp, data)) != 0) { - return (rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - while (cnt >= port_width) { - data = 0; - for (i=0; i<port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data(info, wp, data)) != 0) { - return (rc); - } - wp += port_width; - cnt -= port_width; - if ((wp & 0xfff) == 0) - { - printf("%08lX",wp); - printf("\x1b[8D"); - } - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<port_width && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_data(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t *info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *)dest; - ulong status; - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf("not erased at %08lx (%x)\n",(ulong)addr,*addr); - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - *addr = (FPW)0x40004000; /* write setup */ - *addr = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer (0); - - while (((status = SWAP(*addr)) & (FPW)0x00800080) != (FPW)0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = (FPW)0xFF00FF00; /* restore read mode */ - return (1); - } - } - - *addr = (FPW)0xFF00FF00; /* restore read mode */ - - return (0); -} diff --git a/board/eltec/mhpc/mhpc.c b/board/eltec/mhpc/mhpc.c deleted file mode 100644 index 5781b2a..0000000 --- a/board/eltec/mhpc/mhpc.c +++ /dev/null @@ -1,465 +0,0 @@ -/* - * (C) Copyright 2001 - * ELTEC Elektronik AG - * Frank Gottschling <fgottschling@eltec.de> - * - * Board specific routines for the miniHiPerCam - * - * - initialisation (eeprom) - * - memory controller - * - serial io initialisation - * - ethernet io initialisation - * - * ----------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <cli.h> -#include <linux/ctype.h> -#include <commproc.h> -#include "mpc8xx.h" -#include <video_fb.h> - -extern void eeprom_init (void); -extern int eeprom_read (unsigned dev_addr, unsigned offset, - unsigned char *buffer, unsigned cnt); -extern int eeprom_write (unsigned dev_addr, unsigned offset, - unsigned char *buffer, unsigned cnt); - -/* globals */ -void *video_hw_init (void); -void video_set_lut (unsigned int index, /* color number */ - unsigned char r, /* red */ - unsigned char g, /* green */ - unsigned char b /* blue */ - ); - -GraphicDevice gdev; - -/* locals */ -static void video_circle (char *center, int radius, int color, int pitch); -static void video_test_image (void); -static void video_default_lut (unsigned int clut_type); - -/* revision info foer MHPC EEPROM offset 480 */ -typedef struct { - char board[12]; /* 000 - Board Revision information */ - char sensor; /* 012 - Sensor Type information */ - char serial[8]; /* 013 - Board serial number */ - char etheraddr[6]; /* 021 - Ethernet node addresse */ - char revision[2]; /* 027 - Revision code */ - char option[3]; /* 029 - resevered for options */ -} revinfo; - -/* ------------------------------------------------------------------------- */ - -static const unsigned int sdram_table[] = { - /* read single beat cycle */ - 0xef0efc04, 0x0e2dac04, 0x01ba5c04, 0x1ff5fc00, - 0xfffffc05, 0xeffafc34, 0x0ff0bc34, 0x1ff57c35, - - /* read burst cycle */ - 0xef0efc04, 0x0e3dac04, 0x10ff5c04, 0xf0fffc00, - 0xf0fffc00, 0xf1fffc00, 0xfffffc00, 0xfffffc05, - 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, - 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, - - /* write single beat cycle */ - 0xef0efc04, 0x0e29ac00, 0x01b25c04, 0x1ff5fc05, - 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, - - /* write burst cycle */ - 0xef0ef804, 0x0e39a000, 0x10f75000, 0xf0fff440, - 0xf0fffc40, 0xf1fffc04, 0xfffffc05, 0xfffffc04, - 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, - 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, - - /* periodic timer expired */ - 0xeffebc84, 0x1ffd7c04, 0xfffffc04, 0xfffffc84, - 0xeffebc04, 0x1ffd7c04, 0xfffffc04, 0xfffffc05, - 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, - - /* exception */ - 0xfffffc04, 0xfffffc05, 0xfffffc04, 0xfffffc04 -}; - -/* ------------------------------------------------------------------------- */ - -int board_early_init_f (void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile cpm8xx_t *cp = &(im->im_cpm); - volatile iop8xx_t *ip = (iop8xx_t *) & (im->im_ioport); - - /* reset the port A s.a. cpm-routines */ - ip->iop_padat = 0x0000; - ip->iop_papar = 0x0000; - ip->iop_padir = 0x0800; - ip->iop_paodr = 0x0000; - - /* reset the port B for digital and LCD output */ - cp->cp_pbdat = 0x0300; - cp->cp_pbpar = 0x5001; - cp->cp_pbdir = 0x5301; - cp->cp_pbodr = 0x0000; - - /* reset the port C configured for SMC1 serial port and aqc. control */ - ip->iop_pcdat = 0x0800; - ip->iop_pcpar = 0x0000; - ip->iop_pcdir = 0x0e30; - ip->iop_pcso = 0x0000; - - /* Config port D for LCD output */ - ip->iop_pdpar = 0x1fff; - ip->iop_pddir = 0x1fff; - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check Board Identity - */ -int checkboard (void) -{ - puts ("Board: ELTEC miniHiperCam\n"); - return (0); -} - -/* ------------------------------------------------------------------------- */ - -int misc_init_r (void) -{ - revinfo mhpcRevInfo; - char nid[32]; - char *mhpcSensorTypes[] = { "OMNIVISON OV7610/7620 color", - "OMNIVISON OV7110 b&w", NULL - }; - char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0, - 0, 0, 0, 0, 10, 11, 12, 13, 14, 15 - }; - int i; - - /* check revision data */ - eeprom_read (CONFIG_SYS_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo, 32); - - if (strncmp ((char *) &mhpcRevInfo.board[2], "MHPC", 4) != 0) { - printf ("Enter revision number (0-9): %c ", - mhpcRevInfo.revision[0]); - if (0 != cli_readline(NULL)) { - mhpcRevInfo.revision[0] = - (char) toupper (console_buffer[0]); - } - - printf ("Enter revision character (A-Z): %c ", - mhpcRevInfo.revision[1]); - if (1 == cli_readline(NULL)) { - mhpcRevInfo.revision[1] = - (char) toupper (console_buffer[0]); - } - - printf ("Enter board name (V-XXXX-XXXX): %s ", - (char *) &mhpcRevInfo.board); - if (11 == cli_readline(NULL)) { - for (i = 0; i < 11; i++) { - mhpcRevInfo.board[i] = - (char) toupper (console_buffer[i]); - mhpcRevInfo.board[11] = '\0'; - } - } - - printf ("Supported sensor types:\n"); - i = 0; - do { - printf ("\n \'%d\' : %s\n", i, mhpcSensorTypes[i]); - } while (mhpcSensorTypes[++i] != NULL); - - do { - printf ("\nEnter sensor number (0-255): %d ", - (int) mhpcRevInfo.sensor); - if (0 != cli_readline(NULL)) { - mhpcRevInfo.sensor = - (unsigned char) - simple_strtoul (console_buffer, NULL, - 10); - } - } while (mhpcRevInfo.sensor >= i); - - printf ("Enter serial number: %s ", - (char *) &mhpcRevInfo.serial); - if (6 == cli_readline(NULL)) { - for (i = 0; i < 6; i++) { - mhpcRevInfo.serial[i] = console_buffer[i]; - } - mhpcRevInfo.serial[6] = '\0'; - } - - printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ", mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1], mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3], mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]); - if (12 == cli_readline(NULL)) { - for (i = 0; i < 12; i += 2) { - mhpcRevInfo.etheraddr[i >> 1] = - (char) (16 * - hex[toupper - (console_buffer[i]) - - '0'] + - hex[toupper - (console_buffer[i + 1]) - - '0']); - } - } - - /* setup new revision data */ - eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo, - 32); - } - - /* set environment */ - sprintf (nid, "%02x:%02x:%02x:%02x:%02x:%02x", - mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1], - mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3], - mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]); - setenv ("ethaddr", nid); - - /* print actual board identification */ - printf ("Ident: %s %s Ser %s Rev %c%c\n", - mhpcRevInfo.board, - (mhpcRevInfo.sensor == 0 ? "color" : "b&w"), - (char *) &mhpcRevInfo.serial, mhpcRevInfo.revision[0], - mhpcRevInfo.revision[1]); - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE)); /* no refresh yet */ - memctl->memc_mbmr = MBMR_GPL_B4DIS; /* should this be mamr? - NTL */ - memctl->memc_mptpr = MPTPR_PTP_DIV64; - memctl->memc_mar = 0x00008800; - - /* - * Map controller SDRAM bank 0 - */ - memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; - udelay (200); - - /* - * Map controller SDRAM bank 1 - */ - memctl->memc_or2 = CONFIG_SYS_OR2; - memctl->memc_br2 = CONFIG_SYS_BR2; - - /* - * Perform SDRAM initializsation sequence - */ - memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */ - udelay (1); - memctl->memc_mcr = 0x80002730; /* SDRAM bank 0 - execute twice */ - udelay (1); - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - udelay (10000); - - /* leave place for framebuffers */ - return (SDRAM_MAX_SIZE - SDRAM_RES_SIZE); -} - -/* ------------------------------------------------------------------------- */ - -static void video_circle (char *center, int radius, int color, int pitch) -{ - int x, y, d, dE, dSE; - - x = 0; - y = radius; - d = 1 - radius; - dE = 3; - dSE = -2 * radius + 5; - - *(center + x + y * pitch) = color; - *(center + y + x * pitch) = color; - *(center + y - x * pitch) = color; - *(center + x - y * pitch) = color; - *(center - x - y * pitch) = color; - *(center - y - x * pitch) = color; - *(center - y + x * pitch) = color; - *(center - x + y * pitch) = color; - while (y > x) { - if (d < 0) { - d += dE; - dE += 2; - dSE += 2; - x++; - } else { - d += dSE; - dE += 2; - dSE += 4; - x++; - y--; - } - *(center + x + y * pitch) = color; - *(center + y + x * pitch) = color; - *(center + y - x * pitch) = color; - *(center + x - y * pitch) = color; - *(center - x - y * pitch) = color; - *(center - y - x * pitch) = color; - *(center - y + x * pitch) = color; - *(center - x + y * pitch) = color; - } -} - -/* ------------------------------------------------------------------------- */ - -static void video_test_image (void) -{ - char *di; - int i, n; - - /* draw raster */ - for (i = 0; i < LCD_VIDEO_ROWS; i += 32) { - memset ((char *) (LCD_VIDEO_ADDR + i * LCD_VIDEO_COLS), - LCD_VIDEO_FG, LCD_VIDEO_COLS); - for (n = i + 1; n < i + 32; n++) - memset ((char *) (LCD_VIDEO_ADDR + - n * LCD_VIDEO_COLS), LCD_VIDEO_BG, - LCD_VIDEO_COLS); - } - - for (i = 0; i < LCD_VIDEO_COLS; i += 32) { - for (n = 0; n < LCD_VIDEO_ROWS; n++) - *(char *) (LCD_VIDEO_ADDR + n * LCD_VIDEO_COLS + i) = - LCD_VIDEO_FG; - } - - /* draw gray bar */ - di = (char *) (LCD_VIDEO_ADDR + (LCD_VIDEO_COLS - 256) / 64 * 32 + - 97 * LCD_VIDEO_COLS); - for (n = 0; n < 63; n++) { - for (i = 0; i < 256; i++) { - *di++ = (char) i; - *(di + LCD_VIDEO_COLS * 64) = (i & 1) * 255; - } - di += LCD_VIDEO_COLS - 256; - } - - video_circle ((char *) LCD_VIDEO_ADDR + LCD_VIDEO_COLS / 2 + - LCD_VIDEO_ROWS / 2 * LCD_VIDEO_COLS, LCD_VIDEO_ROWS / 2, - LCD_VIDEO_FG, LCD_VIDEO_COLS); -} - -/* ------------------------------------------------------------------------- */ - -static void video_default_lut (unsigned int clut_type) -{ - unsigned int i; - unsigned char RGB[] = { - 0x00, 0x00, 0x00, /* black */ - 0x80, 0x80, 0x80, /* gray */ - 0xff, 0x00, 0x00, /* red */ - 0x00, 0xff, 0x00, /* green */ - 0x00, 0x00, 0xff, /* blue */ - 0x00, 0xff, 0xff, /* cyan */ - 0xff, 0x00, 0xff, /* magenta */ - 0xff, 0xff, 0x00, /* yellow */ - 0x80, 0x00, 0x00, /* dark red */ - 0x00, 0x80, 0x00, /* dark green */ - 0x00, 0x00, 0x80, /* dark blue */ - 0x00, 0x80, 0x80, /* dark cyan */ - 0x80, 0x00, 0x80, /* dark magenta */ - 0x80, 0x80, 0x00, /* dark yellow */ - 0xc0, 0xc0, 0xc0, /* light gray */ - 0xff, 0xff, 0xff, /* white */ - }; - - switch (clut_type) { - case 1: - for (i = 0; i < 240; i++) - video_set_lut (i, i, i, i); - for (i = 0; i < 16; i++) - video_set_lut (i + 240, RGB[i * 3], RGB[i * 3 + 1], - RGB[i * 3 + 2]); - break; - default: - for (i = 0; i < 256; i++) - video_set_lut (i, i, i, i); - } -} - -/* ------------------------------------------------------------------------- */ - -void *video_hw_init (void) -{ - unsigned int clut = 0; - unsigned char *penv; - immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - /* enable video only on CLUT value */ - if ((penv = (uchar *)getenv ("clut")) != NULL) - clut = (u_int) simple_strtoul ((char *)penv, NULL, 10); - else - return NULL; - - /* disable graphic before write LCD regs. */ - immr->im_lcd.lcd_lccr = 0x96000866; - - /* config LCD regs. */ - immr->im_lcd.lcd_lcfaa = LCD_VIDEO_ADDR; - immr->im_lcd.lcd_lchcr = 0x010a0093; - immr->im_lcd.lcd_lcvcr = 0x900f0024; - - printf ("Video: 640x480 8Bit Index Lut %s\n", - (clut == 1 ? "240/16 (gray/vga)" : "256(gray)")); - - video_default_lut (clut); - - /* clear framebuffer */ - memset ((char *) (LCD_VIDEO_ADDR), LCD_VIDEO_BG, - LCD_VIDEO_ROWS * LCD_VIDEO_COLS); - - /* enable graphic */ - immr->im_lcd.lcd_lccr = 0x96000867; - - /* fill in Graphic Device */ - gdev.frameAdrs = LCD_VIDEO_ADDR; - gdev.winSizeX = LCD_VIDEO_COLS; - gdev.winSizeY = LCD_VIDEO_ROWS; - gdev.gdfBytesPP = 1; - gdev.gdfIndex = GDF__8BIT_INDEX; - - if (clut > 1) - /* return Graphic Device for console */ - return (void *) &gdev; - else - /* just graphic enabled - draw something beautiful */ - video_test_image (); - - return NULL; /* this disabels cfb - console */ -} - -/* ------------------------------------------------------------------------- */ - -void video_set_lut (unsigned int index, - unsigned char r, unsigned char g, unsigned char b) -{ - unsigned int lum; - unsigned short *pLut = (unsigned short *) (CONFIG_SYS_IMMR + 0x0e00); - - /* 16 bit lut values, 12 bit used, xxxx BBGG RRii iiii */ - /* y = 0.299*R + 0.587*G + 0.114*B */ - lum = (2990 * r + 5870 * g + 1140 * b) / 10000; - pLut[index] = - ((b & 0xc0) << 4) | ((g & 0xc0) << 2) | (r & 0xc0) | (lum & - 0x3f); -} - -/* ------------------------------------------------------------------------- */ diff --git a/board/eltec/mhpc/u-boot.lds.debug b/board/eltec/mhpc/u-boot.lds.debug deleted file mode 100644 index b0091db..0000000 --- a/board/eltec/mhpc/u-boot.lds.debug +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} |