diff options
Diffstat (limited to 'board/delta')
-rw-r--r-- | board/delta/nand.c | 229 |
1 files changed, 146 insertions, 83 deletions
diff --git a/board/delta/nand.c b/board/delta/nand.c index bd1bb4f..7255827 100644 --- a/board/delta/nand.c +++ b/board/delta/nand.c @@ -29,39 +29,13 @@ #include <asm/arch/pxa-regs.h> /* - * hardware specific access to control-lines - * function borrowed from Linux 2.6 (drivers/mtd/nand/ppchameleonevb.c) + * not required for Monahans DFC */ static void delta_hwcontrol(struct mtd_info *mtdinfo, int cmd) { -#if 0 - struct nand_chip *this = mtdinfo->priv; - ulong base = (ulong) this->IO_ADDR_W; - - switch(cmd) { - case NAND_CTL_SETCLE: - MACRO_NAND_CTL_SETCLE((unsigned long)base); - break; - case NAND_CTL_CLRCLE: - MACRO_NAND_CTL_CLRCLE((unsigned long)base); - break; - case NAND_CTL_SETALE: - MACRO_NAND_CTL_SETALE((unsigned long)base); - break; - case NAND_CTL_CLRALE: - MACRO_NAND_CTL_CLRALE((unsigned long)base); - break; - case NAND_CTL_SETNCE: - MACRO_NAND_ENABLE_CE((unsigned long)base); - break; - case NAND_CTL_CLRNCE: - MACRO_NAND_DISABLE_CE((unsigned long)base); - break; - } -#endif + return; } - /* read device ready pin */ static int delta_device_ready(struct mtd_info *mtdinfo) { @@ -69,35 +43,18 @@ static int delta_device_ready(struct mtd_info *mtdinfo) return 1; else return 0; -#if 0 - struct nand_chip *this = mtdinfo->priv; - ulong rb_gpio_pin; - - /* use the base addr to find out which chip are we dealing with */ - switch((ulong) this->IO_ADDR_W) { - case CFG_NAND0_BASE: - rb_gpio_pin = CFG_NAND0_RDY; - break; - case CFG_NAND1_BASE: - rb_gpio_pin = CFG_NAND1_RDY; - break; - default: /* this should never happen */ - return 0; - break; - } - - if (in32(GPIO0_IR) & rb_gpio_pin) - return 1; -#endif return 0; } -static u_char delta_read_byte(struct mtd_info *mtd) +/* The original: + * static void delta_read_buf(struct mtd_info *mtd, const u_char *buf, int len) + * + * Shouldn't this be "u_char * const buf" ? + */ +static void delta_read_buf(struct mtd_info *mtd, u_char* const buf, int len) { -/* struct nand_chip *this = mtd->priv; */ - unsigned long tmp; + int i, j; - /* wait for read request */ while(1) { if(NDSR & NDSR_RDDREQ) { NDSR |= NDSR_RDDREQ; @@ -105,9 +62,53 @@ static u_char delta_read_byte(struct mtd_info *mtd) } } - tmp = NDDB; - printk("delta_read_byte: 0x%x.\n", tmp); - return (u_char) tmp; + /* we have to be carefull not to overflow the buffer if len is + * not a multiple of 4 */ + unsigned long num_words = len & 0xfffffffc; + unsigned long rest = len & 0x3; + + /* if there are any, first copy multiple of 4 bytes */ + if(num_words) { + for(i=0; i<num_words; i+=4) + buf[i] = NDDB; + } + + /* ...then the rest */ + if(rest) { + unsigned long rest_data = NDDB; + for(j=0;j<rest;j++) + buf[i+j] = (u_char) ((rest_data>>j) & 0xff); + } + + return; +} + +/* global var, too bad */ +static unsigned long read_buf = 0; +static unsigned char bytes_read = 0; + +static u_char delta_read_byte(struct mtd_info *mtd) +{ +/* struct nand_chip *this = mtd->priv; */ + unsigned char byte; + + if(bytes_read == 0) { + /* wait for read request */ + while(1) { + if(NDSR & NDSR_RDDREQ) { + NDSR |= NDSR_RDDREQ; + break; + } + } + read_buf = NDDB; + printk("delta_read_byte: 0x%x.\n", read_buf); + } + byte = (unsigned char) (read_buf>>(8 * bytes_read++)); + if(bytes_read >= 4) + bytes_read = 0; + + printf("delta_read_byte: returning 0x%x.\n", byte); + return byte; } /* this is really monahans, not board specific ... */ @@ -116,8 +117,11 @@ static void delta_cmdfunc(struct mtd_info *mtd, unsigned command, { /* register struct nand_chip *this = mtd->priv; */ unsigned long ndcb0=0, ndcb1=0, ndcb2=0; - uchar command2; + /* clear the ugly byte read buffer */ + bytes_read = 0; + read_buf = 0; + /* Clear NDSR */ NDSR = 0xFFF; @@ -134,34 +138,58 @@ static void delta_cmdfunc(struct mtd_info *mtd, unsigned command, } } - /* if command is a double byte cmd, we set bit double cmd bit 19 */ - command2 = (command>>8) & 0xFF; - ndcb0 = command | ((command2 ? 1 : 0) << 19); + /* if command is a double byte cmd, we set bit double cmd bit 19 */ + /* command2 = (command>>8) & 0xFF; */ + /* ndcb0 = command | ((command2 ? 1 : 0) << 19); *\/ */ switch (command) { + case NAND_CMD_READ0: + ndcb0 = (NAND_CMD_READ0 | (4<<16)); + column >>= 1; /* adjust for 16 bit bus */ + ndcb1 = (((column>>1) & 0xff) | + ((page_addr<<8) & 0xff00) | + ((page_addr<<8) & 0xff0000) | + ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */ + break; case NAND_CMD_READID: printk("delta_cmdfunc: NAND_CMD_READID.\n"); - ndcb0 |= ((3 << 21) | (1 << 16)); /* addr cycles*/ + ndcb0 = (NAND_CMD_READID | (3 << 21) | (1 << 16)); /* addr cycles*/ break; case NAND_CMD_PAGEPROG: + break; case NAND_CMD_ERASE1: case NAND_CMD_ERASE2: + break; case NAND_CMD_SEQIN: + ndcb0 = (NAND_CMD_SEQIN<<8) | (1<<19) | (4<<16); + if(column >= mtd->oobblock) { + /* OOB area */ + column -= mtd->oobblock; + ndcb0 |= NAND_CMD_READOOB; + } else if (column < 256) { + /* First 256 bytes --> READ0 */ + ndcb0 |= NAND_CMD_READ0; + } else { + /* Only for 8 bit devices - not delta!!! */ + column -= 256; + ndcb0 |= NAND_CMD_READ1; + } + break; case NAND_CMD_STATUS: return; case NAND_CMD_RESET: return; default: - printk("delta_cmdfunc: error, unkown command issued.\n"); + printk("delta_cmdfunc: error, unsupported command.\n"); return; } NDCB0 = ndcb0; - NDCB1 = ndcb1; - NDCB2 = ndcb2; + NDCB0 = ndcb1; + NDCB0 = ndcb2; } -void delta_dfc_gpio_init() +static void delta_dfc_gpio_init() { printf("Setting up DFC GPIO's.\n"); @@ -216,6 +244,23 @@ void delta_dfc_gpio_init() * Members with a "?" were not set in the merged testing-NAND branch, * so they are not set here either. */ +void wait(unsigned long us) +{ +#define OSCR_CLK_FREQ 3.250 /* kHz */ + + unsigned long start = OSCR; + unsigned long delta = 0, cur; + us *= OSCR_CLK_FREQ; + + while (delta < us) { + cur = OSCR; + if(cur < start) /* OSCR overflowed */ + delta = cur + (start^0xffffffff); + else + delta = cur - start; + } +} + void board_nand_init(struct nand_chip *nand) { unsigned long tCH, tCS, tWH, tWP, tRH, tRP, tRP_high, tR, tWHR, tAR; @@ -225,14 +270,24 @@ void board_nand_init(struct nand_chip *nand) /* turn on the NAND Controller Clock (104 MHz @ D0) */ CKENA |= (CKENA_4_NAND | CKENA_9_SMC); - + + /* wait ? */ +/* printf("stupid loop start...\n"); */ +/* wait(200); */ +/* printf("stupid loop end.\n"); */ + + /* NAND Timing Parameters (in ns) */ #define NAND_TIMING_tCH 10 #define NAND_TIMING_tCS 0 #define NAND_TIMING_tWH 20 #define NAND_TIMING_tWP 40 -#define NAND_TIMING_tRH 20 -#define NAND_TIMING_tRP 40 +/* #define NAND_TIMING_tRH 20 */ +/* #define NAND_TIMING_tRP 40 */ + +#define NAND_TIMING_tRH 25 +#define NAND_TIMING_tRP 50 + #define NAND_TIMING_tR 11123 #define NAND_TIMING_tWHR 110 #define NAND_TIMING_tAR 10 @@ -274,6 +329,8 @@ void board_nand_init(struct nand_chip *nand) DFC_MAX_tAR); + printf("tCH=%u, tCS=%u, tWH=%u, tWP=%u, tRH=%u, tRP=%u, tR=%u, tWHR=%u, tAR=%u.\n", tCH, tCS, tWH, tWP, tRH, tRP, tR, tWHR, tAR); + /* tRP value is split in the register */ if(tRP & (1 << 4)) { tRP_high = 1; @@ -307,33 +364,39 @@ void board_nand_init(struct nand_chip *nand) * - cs don't care, see if we can enable later! * - row address start position (after second cycle) * - pages per block = 32 + * - ND_RDY : clears command buffer */ - NDCR = (NDCR_ND_ARB_EN | /* enable bus arbiter */ - NDCR_SPARE_EN | /* use the spare area */ + NDCR = (NDCR_SPARE_EN | /* use the spare area */ NDCR_DWIDTH_C | /* 16bit DFC data bus width */ NDCR_DWIDTH_M | /* 16 bit Flash device data bus width */ - (2 << 16) | /* read id count = 7 ???? mk@tbd */ - NDCE_RDYM | /* flash device ready ir masked */ - NDCE_CS0_PAGEDM | /* ND_nCSx page done ir masked */ - NDCE_CS1_PAGEDM | - NDCE_CS0_CMDDM | /* ND_CSx command done ir masked */ - NDCE_CS1_CMDDM | - NDCE_CS0_BBDM | /* ND_CSx bad block detect ir masked */ - NDCE_CS1_BBDM | - NDCE_DBERRM | /* double bit error ir masked */ - NDCE_SBERRM | /* single bit error ir masked */ - NDCE_WRDREQM | /* write data request ir masked */ - NDCE_RDDREQM | /* read data request ir masked */ - NDCE_WRCMDREQM); /* write command request ir masked */ + NDCR_NCSX | /* Chip select busy don't care */ + (7 << 16) | /* read id count = 7 ???? mk@tbd */ + NDCR_ND_ARB_EN | /* enable bus arbiter */ + NDCR_RDYM | /* flash device ready ir masked */ + NDCR_CS0_PAGEDM | /* ND_nCSx page done ir masked */ + NDCR_CS1_PAGEDM | + NDCR_CS0_CMDDM | /* ND_CSx command done ir masked */ + NDCR_CS1_CMDDM | + NDCR_CS0_BBDM | /* ND_CSx bad block detect ir masked */ + NDCR_CS1_BBDM | + NDCR_DBERRM | /* double bit error ir masked */ + NDCR_SBERRM | /* single bit error ir masked */ + NDCR_WRDREQM | /* write data request ir masked */ + NDCR_RDDREQM | /* read data request ir masked */ + NDCR_WRCMDREQM); /* write command request ir masked */ + + /* wait 10 us due to cmd buffer clear reset */ +/* wait(10); */ nand->hwcontrol = delta_hwcontrol; - nand->dev_ready = delta_device_ready; +/* nand->dev_ready = delta_device_ready; */ nand->eccmode = NAND_ECC_SOFT; nand->chip_delay = NAND_DELAY_US; nand->options = NAND_BUSWIDTH_16; nand->read_byte = delta_read_byte; + nand->read_buf = delta_read_buf; nand->cmdfunc = delta_cmdfunc; /* nand->options = NAND_SAMSUNG_LP_OPTIONS; */ } |