summaryrefslogtreecommitdiff
path: root/board/davinci/da8xxevm/da830evm.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/davinci/da8xxevm/da830evm.c')
-rw-r--r--board/davinci/da8xxevm/da830evm.c227
1 files changed, 227 insertions, 0 deletions
diff --git a/board/davinci/da8xxevm/da830evm.c b/board/davinci/da8xxevm/da830evm.c
new file mode 100644
index 0000000..57506d6
--- /dev/null
+++ b/board/davinci/da8xxevm/da830evm.c
@@ -0,0 +1,227 @@
+/*
+ * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
+ *
+ * Base on code from TI. Original Notices follow:
+ *
+ * (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/
+ *
+ * Modified for DA8xx EVM.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Parts are shamelessly stolen from various TI sources, original copyright
+ * follows:
+ * -----------------------------------------------------------------
+ *
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <net.h>
+#include <netdev.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/emif_defs.h>
+#include <asm/arch/emac_defs.h>
+#include <asm/io.h>
+#include "../common/misc.h"
+#include "common.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define pinmux &davinci_syscfg_regs->pinmux
+
+/* SPI0 pin muxer settings */
+static const struct pinmux_config spi0_pins[] = {
+ { pinmux[7], 1, 3 },
+ { pinmux[7], 1, 4 },
+ { pinmux[7], 1, 5 },
+ { pinmux[7], 1, 6 },
+ { pinmux[7], 1, 7 }
+};
+
+/* EMIF-A bus pins for 8-bit NAND support on CS3 */
+static const struct pinmux_config emifa_nand_pins[] = {
+ { pinmux[13], 1, 6 },
+ { pinmux[13], 1, 7 },
+ { pinmux[14], 1, 0 },
+ { pinmux[14], 1, 1 },
+ { pinmux[14], 1, 2 },
+ { pinmux[14], 1, 3 },
+ { pinmux[14], 1, 4 },
+ { pinmux[14], 1, 5 },
+ { pinmux[15], 1, 7 },
+ { pinmux[16], 1, 0 },
+ { pinmux[18], 1, 1 },
+ { pinmux[18], 1, 4 },
+ { pinmux[18], 1, 5 },
+};
+
+/* EMAC PHY interface pins */
+static const struct pinmux_config emac_pins[] = {
+ { pinmux[9], 0, 5 },
+ { pinmux[10], 2, 1 },
+ { pinmux[10], 2, 2 },
+ { pinmux[10], 2, 3 },
+ { pinmux[10], 2, 4 },
+ { pinmux[10], 2, 5 },
+ { pinmux[10], 2, 6 },
+ { pinmux[10], 2, 7 },
+ { pinmux[11], 2, 0 },
+ { pinmux[11], 2, 1 },
+};
+
+/* UART pin muxer settings */
+static const struct pinmux_config uart_pins[] = {
+ { pinmux[8], 2, 7 },
+ { pinmux[9], 2, 0 }
+};
+
+/* I2C pin muxer settings */
+static const struct pinmux_config i2c_pins[] = {
+ { pinmux[8], 2, 3 },
+ { pinmux[8], 2, 4 }
+};
+
+/* USB0_DRVVBUS pin muxer settings */
+static const struct pinmux_config usb_pins[] = {
+ { pinmux[9], 1, 1 }
+};
+
+static const struct pinmux_resource pinmuxes[] = {
+#ifdef CONFIG_SPI_FLASH
+ PINMUX_ITEM(spi0_pins),
+#endif
+ PINMUX_ITEM(uart_pins),
+ PINMUX_ITEM(i2c_pins),
+#ifdef CONFIG_USB_DA8XX
+ PINMUX_ITEM(usb_pins),
+#endif
+#ifdef CONFIG_USE_NAND
+ PINMUX_ITEM(emifa_nand_pins),
+#endif
+#if defined(CONFIG_DRIVER_TI_EMAC)
+ PINMUX_ITEM(emac_pins),
+#endif
+};
+
+static const struct lpsc_resource lpsc[] = {
+ { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */
+ { DAVINCI_LPSC_SPI0 }, /* Serial Flash */
+ { DAVINCI_LPSC_EMAC }, /* image download */
+ { DAVINCI_LPSC_UART2 }, /* console */
+ { DAVINCI_LPSC_GPIO },
+};
+
+int board_init(void)
+{
+#ifndef CONFIG_USE_IRQ
+ irq_init();
+#endif
+
+#ifdef CONFIG_NAND_DAVINCI
+ /* EMIFA 100MHz clock select */
+ writel(readl(&davinci_syscfg_regs->cfgchip3) & ~2,
+ &davinci_syscfg_regs->cfgchip3);
+ /* NAND CS setup */
+ writel((DAVINCI_ABCR_WSETUP(0) |
+ DAVINCI_ABCR_WSTROBE(2) |
+ DAVINCI_ABCR_WHOLD(0) |
+ DAVINCI_ABCR_RSETUP(0) |
+ DAVINCI_ABCR_RSTROBE(2) |
+ DAVINCI_ABCR_RHOLD(0) |
+ DAVINCI_ABCR_TA(2) |
+ DAVINCI_ABCR_ASIZE_8BIT),
+ &davinci_emif_regs->ab2cr);
+#endif
+
+ /* arch number of the board */
+ gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA830_EVM;
+
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+
+ /*
+ * Power on required peripherals
+ * ARM does not have access by default to PSC0 and PSC1
+ * assuming here that the DSP bootloader has set the IOPU
+ * such that PSC access is available to ARM
+ */
+ if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)))
+ return 1;
+
+ /* setup the SUSPSRC for ARM to control emulation suspend */
+ writel(readl(&davinci_syscfg_regs->suspsrc) &
+ ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
+ DAVINCI_SYSCFG_SUSPSRC_SPI0 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
+ DAVINCI_SYSCFG_SUSPSRC_UART2),
+ &davinci_syscfg_regs->suspsrc);
+
+ /* configure pinmux settings */
+ if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
+ return 1;
+
+ /* enable the console UART */
+ writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
+ DAVINCI_UART_PWREMU_MGMT_UTRST),
+ &davinci_uart2_ctrl_regs->pwremu_mgmt);
+
+ return(0);
+}
+
+#if defined(CONFIG_DRIVER_TI_EMAC)
+
+#define PHY_SW_I2C_ADDR 0x5f /* Address of PHY on i2c bus */
+
+/*
+ * Initializes on-board ethernet controllers.
+ */
+int board_eth_init(bd_t *bis)
+{
+ u_int8_t mac_addr[6];
+ u_int8_t switch_start_cmd[2] = { 0x01, 0x23 };
+
+ /* Read Ethernet MAC address from EEPROM */
+ if (dvevm_read_mac_address(mac_addr))
+ /* set address env if not already set */
+ dv_configure_mac_address(mac_addr);
+
+ /* read the address back from env */
+ if (!eth_getenv_enetaddr("ethaddr", mac_addr))
+ return -1;
+
+ /* provide the resulting addr to the driver */
+ davinci_eth_set_mac_addr(mac_addr);
+
+ /* enable the Ethernet switch in the 3 port PHY */
+ if (i2c_write(PHY_SW_I2C_ADDR, 0, 0,
+ switch_start_cmd, sizeof(switch_start_cmd))) {
+ printf("Ethernet switch start failed!\n");
+ return -1;
+ }
+
+ /* finally, initialise the driver */
+ if (!davinci_emac_initialize()) {
+ printf("Error: Ethernet init failed!\n");
+ return -1;
+ }
+
+ return 0;
+}
+#endif /* CONFIG_DRIVER_TI_EMAC */