summaryrefslogtreecommitdiff
path: root/board/dave/common/fpga.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/dave/common/fpga.c')
-rw-r--r--board/dave/common/fpga.c240
1 files changed, 0 insertions, 240 deletions
diff --git a/board/dave/common/fpga.c b/board/dave/common/fpga.c
deleted file mode 100644
index 0869ca0..0000000
--- a/board/dave/common/fpga.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <command.h>
-
-/* ------------------------------------------------------------------------- */
-
-#ifdef FPGA_DEBUG
-#define DBG(x...) printf(x)
-#else
-#define DBG(x...)
-#endif /* DEBUG */
-
-#define MAX_ONES 226
-
-#ifdef CONFIG_SYS_FPGA_PRG
-# define FPGA_PRG CONFIG_SYS_FPGA_PRG /* FPGA program pin (ppc output)*/
-# define FPGA_CLK CONFIG_SYS_FPGA_CLK /* FPGA clk pin (ppc output) */
-# define FPGA_DATA CONFIG_SYS_FPGA_DATA /* FPGA data pin (ppc output) */
-# define FPGA_DONE CONFIG_SYS_FPGA_DONE /* FPGA done pin (ppc input) */
-# define FPGA_INIT CONFIG_SYS_FPGA_INIT /* FPGA init pin (ppc input) */
-#else
-# define FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */
-# define FPGA_CLK 0x02000000 /* FPGA clk pin (ppc output) */
-# define FPGA_DATA 0x01000000 /* FPGA data pin (ppc output) */
-# define FPGA_DONE 0x00800000 /* FPGA done pin (ppc input) */
-# define FPGA_INIT 0x00400000 /* FPGA init pin (ppc input) */
-#endif
-
-#define ERROR_FPGA_PRG_INIT_LOW -1 /* Timeout after PRG* asserted */
-#define ERROR_FPGA_PRG_INIT_HIGH -2 /* Timeout after PRG* deasserted */
-#define ERROR_FPGA_PRG_DONE -3 /* Timeout after programming */
-
-#define SET_FPGA(data) out32(GPIO0_OR, data)
-
-#define FPGA_WRITE_1 { \
- SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \
- SET_FPGA(FPGA_PRG | FPGA_DATA); /* set data to 1 */ \
- SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set clock to 1 */ \
- SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
-
-#define FPGA_WRITE_0 { \
- SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \
- SET_FPGA(FPGA_PRG); /* set data to 0 */ \
- SET_FPGA(FPGA_PRG | FPGA_CLK); /* set clock to 1 */ \
- SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
-
-#if 0
-static int fpga_boot (unsigned char *fpgadata, int size)
-{
- int i, index, len;
- int count;
-
-#ifdef CONFIG_SYS_FPGA_SPARTAN2
- int j;
-#else
- unsigned char b;
- int bit;
-#endif
-
- /* display infos on fpgaimage */
- index = 15;
- for (i = 0; i < 4; i++) {
- len = fpgadata[index];
- DBG ("FPGA: %s\n", &(fpgadata[index + 1]));
- index += len + 3;
- }
-
-#ifdef CONFIG_SYS_FPGA_SPARTAN2
- /* search for preamble 0xFFFFFFFF */
- while (1) {
- if ((fpgadata[index] == 0xff) && (fpgadata[index + 1] == 0xff)
- && (fpgadata[index + 2] == 0xff)
- && (fpgadata[index + 3] == 0xff))
- break; /* preamble found */
- else
- index++;
- }
-#else
- /* search for preamble 0xFF2X */
- for (index = 0; index < size - 1; index++) {
- if ((fpgadata[index] == 0xff)
- && ((fpgadata[index + 1] & 0xf0) == 0x30))
- break;
- }
- index += 2;
-#endif
-
- DBG ("FPGA: configdata starts at position 0x%x\n", index);
- DBG ("FPGA: length of fpga-data %d\n", size - index);
-
- /*
- * Setup port pins for fpga programming
- */
- out32 (GPIO0_ODR, 0x00000000); /* no open drain pins */
- out32 (GPIO0_TCR, in32 (GPIO0_TCR) | FPGA_PRG | FPGA_CLK | FPGA_DATA); /* setup for output */
- out32 (GPIO0_OR, in32 (GPIO0_OR) | FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set pins to high */
-
- DBG ("%s, ",
- ((in32 (GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
- DBG ("%s\n",
- ((in32 (GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
- /*
- * Init fpga by asserting and deasserting PROGRAM*
- */
- SET_FPGA (FPGA_CLK | FPGA_DATA);
-
- /* Wait for FPGA init line low */
- count = 0;
- while (in32 (GPIO0_IR) & FPGA_INIT) {
- udelay (1000); /* wait 1ms */
- /* Check for timeout - 100us max, so use 3ms */
- if (count++ > 3) {
- DBG ("FPGA: Booting failed!\n");
- return ERROR_FPGA_PRG_INIT_LOW;
- }
- }
-
- DBG ("%s, ",
- ((in32 (GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
- DBG ("%s\n",
- ((in32 (GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
- /* deassert PROGRAM* */
- SET_FPGA (FPGA_PRG | FPGA_CLK | FPGA_DATA);
-
- /* Wait for FPGA end of init period . */
- count = 0;
- while (!(in32 (GPIO0_IR) & FPGA_INIT)) {
- udelay (1000); /* wait 1ms */
- /* Check for timeout */
- if (count++ > 3) {
- DBG ("FPGA: Booting failed!\n");
- return ERROR_FPGA_PRG_INIT_HIGH;
- }
- }
-
- DBG ("%s, ",
- ((in32 (GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
- DBG ("%s\n",
- ((in32 (GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
- DBG ("write configuration data into fpga\n");
- /* write configuration-data into fpga... */
-
-#ifdef CONFIG_SYS_FPGA_SPARTAN2
- /*
- * Load uncompressed image into fpga
- */
- for (i = index; i < size; i++) {
- for (j = 0; j < 8; j++) {
- if ((fpgadata[i] & 0x80) == 0x80) {
- FPGA_WRITE_1;
- } else {
- FPGA_WRITE_0;
- }
- fpgadata[i] <<= 1;
- }
- }
-#else /* ! CONFIG_SYS_FPGA_SPARTAN2 */
- /* send 0xff 0x20 */
- FPGA_WRITE_1;
- FPGA_WRITE_1;
- FPGA_WRITE_1;
- FPGA_WRITE_1;
- FPGA_WRITE_1;
- FPGA_WRITE_1;
- FPGA_WRITE_1;
- FPGA_WRITE_1;
- FPGA_WRITE_0;
- FPGA_WRITE_0;
- FPGA_WRITE_1;
- FPGA_WRITE_0;
- FPGA_WRITE_0;
- FPGA_WRITE_0;
- FPGA_WRITE_0;
- FPGA_WRITE_0;
-
- /*
- ** Bit_DeCompression
- ** Code 1 .. maxOnes : n '1's followed by '0'
- ** maxOnes + 1 .. maxOnes + 1 : n - 1 '1's no '0'
- ** maxOnes + 2 .. 254 : n - (maxOnes + 2) '0's followed by '1'
- ** 255 : '1'
- */
-
- for (i = index; i < size; i++) {
- b = fpgadata[i];
- if ((b >= 1) && (b <= MAX_ONES)) {
- for (bit = 0; bit < b; bit++) {
- FPGA_WRITE_1;
- }
- FPGA_WRITE_0;
- } else if (b == (MAX_ONES + 1)) {
- for (bit = 1; bit < b; bit++) {
- FPGA_WRITE_1;
- }
- } else if ((b >= (MAX_ONES + 2)) && (b <= 254)) {
- for (bit = 0; bit < (b - (MAX_ONES + 2)); bit++) {
- FPGA_WRITE_0;
- }
- FPGA_WRITE_1;
- } else if (b == 255) {
- FPGA_WRITE_1;
- }
- }
-#endif /* CONFIG_SYS_FPGA_SPARTAN2 */
-
- DBG ("%s, ",
- ((in32 (GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
- DBG ("%s\n",
- ((in32 (GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
- /*
- * Check if fpga's DONE signal - correctly booted ?
- */
-
- /* Wait for FPGA end of programming period . */
- count = 0;
- while (!(in32 (GPIO0_IR) & FPGA_DONE)) {
- udelay (1000); /* wait 1ms */
- /* Check for timeout */
- if (count++ > 3) {
- DBG ("FPGA: Booting failed!\n");
- return ERROR_FPGA_PRG_DONE;
- }
- }
-
- DBG ("FPGA: Booting successful!\n");
- return 0;
-}
-#endif /* 0 */