diff options
Diffstat (limited to 'board/dave/PPChameleonEVB')
| -rw-r--r-- | board/dave/PPChameleonEVB/PPChameleonEVB.c | 14 | ||||
| -rw-r--r-- | board/dave/PPChameleonEVB/flash.c | 6 | ||||
| -rw-r--r-- | board/dave/PPChameleonEVB/nand.c | 8 | ||||
| -rw-r--r-- | board/dave/PPChameleonEVB/u-boot.lds | 2 |
4 files changed, 15 insertions, 15 deletions
diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c index c715ad4..a6aa655 100644 --- a/board/dave/PPChameleonEVB/PPChameleonEVB.c +++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c @@ -38,8 +38,8 @@ int gunzip(void *, int, unsigned char *, unsigned long *); int board_early_init_f (void) { - out32(GPIO0_OR, CFG_NAND0_CE); /* set initial outputs */ - out32(GPIO0_OR, CFG_NAND1_CE); /* set initial outputs */ + out32(GPIO0_OR, CONFIG_SYS_NAND0_CE); /* set initial outputs */ + out32(GPIO0_OR, CONFIG_SYS_NAND1_CE); /* set initial outputs */ /* * IRQ 0-15 405GP internally generated; active high; level sensitive @@ -85,10 +85,10 @@ int misc_init_r (void) { /* adjust flash start and size as well as the offset */ gd->bd->bi_flashstart = 0 - flash_info[0].size; - gd->bd->bi_flashoffset= flash_info[0].size - CFG_MONITOR_LEN; + gd->bd->bi_flashoffset= flash_info[0].size - CONFIG_SYS_MONITOR_LEN; #if 0 volatile unsigned short *fpga_mode = - (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL); + (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL); volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4); volatile unsigned char *duart1_mcr = @@ -103,8 +103,8 @@ int misc_init_r (void) int i; unsigned long cntrl0Reg; - dst = malloc(CFG_FPGA_MAX_SIZE); - if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { + dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE); + if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { printf ("GUNZIP ERROR - must RESET board to recover\n"); do_reset (NULL, 0, 0, NULL); } @@ -168,7 +168,7 @@ int misc_init_r (void) /* * Enable power on PS/2 interface */ - *fpga_mode |= CFG_FPGA_CTRL_PS2_RESET; + *fpga_mode |= CONFIG_SYS_FPGA_CTRL_PS2_RESET; /* * Enable interrupts in exar duart mcr[3] diff --git a/board/dave/PPChameleonEVB/flash.c b/board/dave/PPChameleonEVB/flash.c index 692d275..e5a0d3d 100644 --- a/board/dave/PPChameleonEVB/flash.c +++ b/board/dave/PPChameleonEVB/flash.c @@ -42,7 +42,7 @@ static void flash_get_offsets (ulong base, flash_info_t * info); unsigned long flash_init (void) { #ifdef __DEBUG_START_FROM_SRAM__ - return CFG_DUMMY_FLASH_SIZE; + return CONFIG_SYS_DUMMY_FLASH_SIZE; #else unsigned long size; int i; @@ -54,7 +54,7 @@ unsigned long flash_init (void) debug("[%s, %d] flash_info = 0x%08X ...\n", __FUNCTION__, __LINE__, flash_info); /* Init: no FLASHes known */ - for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { + for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { flash_info[i].flash_id = FLASH_UNKNOWN; } @@ -102,7 +102,7 @@ unsigned long flash_init (void) /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, - -CFG_MONITOR_LEN, + -CONFIG_SYS_MONITOR_LEN, 0xffffffff, &flash_info[0]); diff --git a/board/dave/PPChameleonEVB/nand.c b/board/dave/PPChameleonEVB/nand.c index 3ccbf65..14b61a4 100644 --- a/board/dave/PPChameleonEVB/nand.c +++ b/board/dave/PPChameleonEVB/nand.c @@ -67,11 +67,11 @@ static int ppchameleonevb_device_ready(struct mtd_info *mtdinfo) /* use the base addr to find out which chip are we dealing with */ switch((ulong) this->IO_ADDR_W) { - case CFG_NAND0_BASE: - rb_gpio_pin = CFG_NAND0_RDY; + case CONFIG_SYS_NAND0_BASE: + rb_gpio_pin = CONFIG_SYS_NAND0_RDY; break; - case CFG_NAND1_BASE: - rb_gpio_pin = CFG_NAND1_RDY; + case CONFIG_SYS_NAND1_BASE: + rb_gpio_pin = CONFIG_SYS_NAND1_RDY; break; default: /* this should never happen */ return 0; diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds index e42c76f..ed02cef 100644 --- a/board/dave/PPChameleonEVB/u-boot.lds +++ b/board/dave/PPChameleonEVB/u-boot.lds @@ -143,7 +143,7 @@ SECTIONS *(COMMON) } - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); . = 0xFFFF8000; .ppcenv : { |