diff options
Diffstat (limited to 'board/csb272/init.S')
| -rw-r--r-- | board/csb272/init.S | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/board/csb272/init.S b/board/csb272/init.S new file mode 100644 index 0000000..e00ebf8 --- /dev/null +++ b/board/csb272/init.S @@ -0,0 +1,216 @@ +/****************************************************************************** + * + * This source code has been made available to you by IBM on an AS-IS + * basis. Anyone receiving this source is licensed under IBM + * copyrights to use it in any way he or she deems fit, including + * copying it, modifying it, compiling it, and redistributing it either + * with or without modifications. No license under IBM patents or + * patent applications is to be implied by the copyright license. + * + * Any user of this software should understand that IBM cannot provide + * technical support for this software and will not be responsible for + * any consequences resulting from the use of this software. + * + * Any person who transfers this source code or any derivative work + * must include the IBM copyright notice, this paragraph, and the + * preceding two paragraphs in the transferred software. + * + * COPYRIGHT I B M CORPORATION 1995 + * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M + * + *****************************************************************************/ +#include <config.h> +#include <ppc4xx.h> + +#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ + +#include <ppc_asm.tmpl> +#include <ppc_defs.h> + +#include <asm/cache.h> +#include <asm/mmu.h> + +#define LI32(reg,val) \ + addis reg,0,val@h;\ + ori reg,reg,val@l + +#define WDCR_EBC(reg,val) \ + addi r4,0,reg;\ + mtdcr ebccfga,r4;\ + addis r4,0,val@h;\ + ori r4,r4,val@l;\ + mtdcr ebccfgd,r4 + +#define WDCR_SDRAM(reg,val) \ + addi r4,0,reg;\ + mtdcr memcfga,r4;\ + addis r4,0,val@h;\ + ori r4,r4,val@l;\ + mtdcr memcfgd,r4 + +/****************************************************************************** + * Function: ext_bus_cntlr_init + * + * Description: Configures EBC Controller and a few basic chip selects. + * + * CS0 is setup to get the Boot Flash out of the addresss range + * so that we may setup a stack. CS7 is setup so that we can + * access and reset the hardware watchdog. + * + * IMPORTANT: For pass1 this code must run from + * cache since you can not reliably change a peripheral banks + * timing register (pbxap) while running code from that bank. + * For ex., since we are running from ROM on bank 0, we can NOT + * execute the code that modifies bank 0 timings from ROM, so + * we run it from cache. + * + * Notes: Does NOT use the stack. + *****************************************************************************/ + .section ".text" + .align 2 + .globl ext_bus_cntlr_init + .type ext_bus_cntlr_init, @function +ext_bus_cntlr_init: + mflr r0 + /******************************************************************** + * Prefetch entire ext_bus_cntrl_init function into the icache. + * This is necessary because we are going to change the same CS we + * are executing from. Otherwise a CPU lockup may occur. + *******************************************************************/ + bl ..getAddr +..getAddr: + mflr r3 /* get address of ..getAddr */ + + /* Calculate number of cache lines for this function */ + addi r4, 0, (((.Lfe0 - ..getAddr) / CFG_CACHELINE_SIZE) + 2) + mtctr r4 +..ebcloop: + icbt r0, r3 /* prefetch cache line for addr in r3*/ + addi r3, r3, CFG_CACHELINE_SIZE /* move to next cache line */ + bdnz ..ebcloop /* continue for $CTR cache lines */ + + /******************************************************************** + * Delay to ensure all accesses to ROM are complete before changing + * bank 0 timings. 200usec should be enough. + * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles. + *******************************************************************/ + addis r3, 0, 0x0 + ori r3, r3, 0xA000 /* wait 200us from reset */ + mtctr r3 +..spinlp: + bdnz ..spinlp /* spin loop */ + + /******************************************************************** + * SETUP CPC0_CR0 + *******************************************************************/ + LI32(r4, 0x007000c0) + mtdcr cntrl0, r4 + + /******************************************************************** + * Setup CPC0_CR1: Change PCIINT signal to PerWE + *******************************************************************/ + mfdcr r4, cntrl1 + ori r4, r4, 0x4000 + mtdcr cntrl1, r4 + + /******************************************************************** + * Setup External Bus Controller (EBC). + *******************************************************************/ + WDCR_EBC(epcr, 0xd84c0000) + /******************************************************************** + * Memory Bank 0 (Intel 28F128J3 Flash) initialization + *******************************************************************/ + /*WDCR_EBC(pb0ap, 0x02869200)*/ + WDCR_EBC(pb0ap, 0x07869200) + WDCR_EBC(pb0cr, 0xfe0bc000) + /******************************************************************** + * Memory Bank 1 (Holtek HT6542B PS/2) initialization + *******************************************************************/ + WDCR_EBC(pb1ap, 0x1f869200) + WDCR_EBC(pb1cr, 0xf0818000) + /******************************************************************** + * Memory Bank 2 (Epson S1D13506) initialization + *******************************************************************/ + WDCR_EBC(pb2ap, 0x05860300) + WDCR_EBC(pb2cr, 0xf045a000) + /******************************************************************** + * Memory Bank 3 (Philips SJA1000 CAN Controllers) initialization + *******************************************************************/ + WDCR_EBC(pb3ap, 0x0387d200) + WDCR_EBC(pb3cr, 0xf021c000) + /******************************************************************** + * Memory Bank 4-7 (Unused) initialization + *******************************************************************/ + WDCR_EBC(pb4ap, 0) + WDCR_EBC(pb4cr, 0) + WDCR_EBC(pb5ap, 0) + WDCR_EBC(pb5cr, 0) + WDCR_EBC(pb6ap, 0) + WDCR_EBC(pb6cr, 0) + WDCR_EBC(pb7ap, 0) + WDCR_EBC(pb7cr, 0) + + /* We are all done */ + mtlr r0 /* Restore link register */ + blr /* Return to calling function */ +.Lfe0: .size ext_bus_cntlr_init,.Lfe0-ext_bus_cntlr_init +/* end ext_bus_cntlr_init() */ + +/****************************************************************************** + * Function: sdram_init + * + * Description: Configures SDRAM memory banks. + * + * Notes: Does NOT use the stack. + *****************************************************************************/ + .section ".text" + .align 2 + .globl sdram_init + .type sdram_init, @function +sdram_init: + + /* + * Disable memory controller to allow + * values to be changed. + */ + WDCR_SDRAM(mem_mcopt1, 0x00000000) + + /* + * Configure Memory Banks + */ + WDCR_SDRAM(mem_mb0cf, 0x00084001) + WDCR_SDRAM(mem_mb1cf, 0x00000000) + WDCR_SDRAM(mem_mb2cf, 0x00000000) + WDCR_SDRAM(mem_mb3cf, 0x00000000) + + /* + * Set up SDTR1 (SDRAM Timing Register) + */ + WDCR_SDRAM(mem_sdtr1, 0x00854009) + + /* + * Set RTR (Refresh Timing Register) + */ + WDCR_SDRAM(mem_rtr, 0x10000000) + /* WDCR_SDRAM(mem_rtr, 0x05f00000) */ + + /******************************************************************** + * Delay to ensure 200usec have elapsed since reset. Assume worst + * case that the core is running 200Mhz: + * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles + *******************************************************************/ + addis r3, 0, 0x0000 + ori r3, r3, 0xA000 /* Wait >200us from reset */ + mtctr r3 +..spinlp2: + bdnz ..spinlp2 /* spin loop */ + + /******************************************************************** + * Set memory controller options reg, MCOPT1. + *******************************************************************/ + WDCR_SDRAM(mem_mcopt1,0x80800000) + +..sdri_done: + blr /* Return to calling function */ +.Lfe1: .size sdram_init,.Lfe1-sdram_init +/* end sdram_init() */ |