summaryrefslogtreecommitdiff
path: root/board/cradle
diff options
context:
space:
mode:
Diffstat (limited to 'board/cradle')
-rw-r--r--board/cradle/flash.c18
-rw-r--r--board/cradle/lowlevel_init.S86
2 files changed, 52 insertions, 52 deletions
diff --git a/board/cradle/flash.c b/board/cradle/flash.c
index 4783d92..b5635fb 100644
--- a/board/cradle/flash.c
+++ b/board/cradle/flash.c
@@ -30,7 +30,7 @@
#define FLASH_BANK_SIZE 0x400000
#define MAIN_SECT_SIZE 0x20000
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/*-----------------------------------------------------------------------
@@ -41,15 +41,15 @@ ulong flash_init (void)
int i, j;
ulong size = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
ulong flashbase = 0;
flash_info[i].flash_id =
(INTEL_MANUFACT & FLASH_VENDMASK) |
(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+ memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
switch (i) {
case 0:
flashbase = PHYS_FLASH_1;
@@ -71,8 +71,8 @@ ulong flash_init (void)
/* Protect monitor and environment sectors
*/
flash_protect (FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
&flash_info[0]);
flash_protect (FLAG_PROTECT_SET,
@@ -88,7 +88,7 @@ void flash_print_info (flash_info_t * info)
{
int i, j;
- for (j = 0; j < CFG_MAX_FLASH_BANKS; j++) {
+ for (j = 0; j < CONFIG_SYS_MAX_FLASH_BANKS; j++) {
switch (info->flash_id & FLASH_VENDMASK) {
case (INTEL_MANUFACT & FLASH_VENDMASK):
printf ("Intel: ");
@@ -183,7 +183,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
while ((*addr & 0x80) != 0x80) {
if (get_timer_masked () >
- CFG_FLASH_ERASE_TOUT) {
+ CONFIG_SYS_FLASH_ERASE_TOUT) {
*addr = 0xB0; /* suspend erase */
*addr = 0xFF; /* reset to read mode */
rc = ERR_TIMOUT;
@@ -250,7 +250,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data)
/* wait while polling the status register */
while (((val = *addr) & 0x80) != 0x80) {
- if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
rc = ERR_TIMOUT;
/* suspend program command */
*addr = 0xB0;
diff --git a/board/cradle/lowlevel_init.S b/board/cradle/lowlevel_init.S
index 2fd307f..6b5cfb9 100644
--- a/board/cradle/lowlevel_init.S
+++ b/board/cradle/lowlevel_init.S
@@ -24,7 +24,7 @@
#include <version.h>
#include <asm/arch/pxa-regs.h>
-DRAM_SIZE: .long CFG_DRAM_SIZE
+DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE
/* wait for coprocessor write complete */
.macro CPWAIT reg
@@ -51,98 +51,98 @@ lowlevel_init:
/* Set up GPIO pins first */
ldr r0, =GPSR0
- ldr r1, =CFG_GPSR0_VAL
+ ldr r1, =CONFIG_SYS_GPSR0_VAL
str r1, [r0]
ldr r0, =GPSR1
- ldr r1, =CFG_GPSR1_VAL
+ ldr r1, =CONFIG_SYS_GPSR1_VAL
str r1, [r0]
ldr r0, =GPSR2
- ldr r1, =CFG_GPSR2_VAL
+ ldr r1, =CONFIG_SYS_GPSR2_VAL
str r1, [r0]
ldr r0, =GPCR0
- ldr r1, =CFG_GPCR0_VAL
+ ldr r1, =CONFIG_SYS_GPCR0_VAL
str r1, [r0]
ldr r0, =GPCR1
- ldr r1, =CFG_GPCR1_VAL
+ ldr r1, =CONFIG_SYS_GPCR1_VAL
str r1, [r0]
ldr r0, =GPCR2
- ldr r1, =CFG_GPCR2_VAL
+ ldr r1, =CONFIG_SYS_GPCR2_VAL
str r1, [r0]
ldr r0, =GRER0
- ldr r1, =CFG_GRER0_VAL
+ ldr r1, =CONFIG_SYS_GRER0_VAL
str r1, [r0]
ldr r0, =GRER1
- ldr r1, =CFG_GRER1_VAL
+ ldr r1, =CONFIG_SYS_GRER1_VAL
str r1, [r0]
ldr r0, =GRER2
- ldr r1, =CFG_GRER2_VAL
+ ldr r1, =CONFIG_SYS_GRER2_VAL
str r1, [r0]
ldr r0, =GFER0
- ldr r1, =CFG_GFER0_VAL
+ ldr r1, =CONFIG_SYS_GFER0_VAL
str r1, [r0]
ldr r0, =GFER1
- ldr r1, =CFG_GFER1_VAL
+ ldr r1, =CONFIG_SYS_GFER1_VAL
str r1, [r0]
ldr r0, =GFER2
- ldr r1, =CFG_GFER2_VAL
+ ldr r1, =CONFIG_SYS_GFER2_VAL
str r1, [r0]
ldr r0, =GPDR0
- ldr r1, =CFG_GPDR0_VAL
+ ldr r1, =CONFIG_SYS_GPDR0_VAL
str r1, [r0]
ldr r0, =GPDR1
- ldr r1, =CFG_GPDR1_VAL
+ ldr r1, =CONFIG_SYS_GPDR1_VAL
str r1, [r0]
ldr r0, =GPDR2
- ldr r1, =CFG_GPDR2_VAL
+ ldr r1, =CONFIG_SYS_GPDR2_VAL
str r1, [r0]
ldr r0, =GAFR0_L
- ldr r1, =CFG_GAFR0_L_VAL
+ ldr r1, =CONFIG_SYS_GAFR0_L_VAL
str r1, [r0]
ldr r0, =GAFR0_U
- ldr r1, =CFG_GAFR0_U_VAL
+ ldr r1, =CONFIG_SYS_GAFR0_U_VAL
str r1, [r0]
ldr r0, =GAFR1_L
- ldr r1, =CFG_GAFR1_L_VAL
+ ldr r1, =CONFIG_SYS_GAFR1_L_VAL
str r1, [r0]
ldr r0, =GAFR1_U
- ldr r1, =CFG_GAFR1_U_VAL
+ ldr r1, =CONFIG_SYS_GAFR1_U_VAL
str r1, [r0]
ldr r0, =GAFR2_L
- ldr r1, =CFG_GAFR2_L_VAL
+ ldr r1, =CONFIG_SYS_GAFR2_L_VAL
str r1, [r0]
ldr r0, =GAFR2_U
- ldr r1, =CFG_GAFR2_U_VAL
+ ldr r1, =CONFIG_SYS_GAFR2_U_VAL
str r1, [r0]
/* enable GPIO pins */
ldr r0, =PSSR
- ldr r1, =CFG_PSSR_VAL
+ ldr r1, =CONFIG_SYS_PSSR_VAL
str r1, [r0]
SET_LED 1
ldr r3, =MSC1 /* low - bank 2 Lubbock Registers / SRAM */
- ldr r2, =CFG_MSC1_VAL /* high - bank 3 Ethernet Controller */
+ ldr r2, =CONFIG_SYS_MSC1_VAL /* high - bank 3 Ethernet Controller */
str r2, [r3] /* need to set MSC1 before trying to write to the HEX LEDs */
ldr r2, [r3] /* need to read it back to make sure the value latches (see MSC section of manual) */
@@ -181,47 +181,47 @@ mem_init:
@ Step 2a
@ write msc0, read back to ensure data latches
@
- ldr r2, =CFG_MSC0_VAL
+ ldr r2, =CONFIG_SYS_MSC0_VAL
str r2, [r1, #MSC0_OFFSET]
ldr r2, [r1, #MSC0_OFFSET]
@ write msc1
- ldr r2, =CFG_MSC1_VAL
+ ldr r2, =CONFIG_SYS_MSC1_VAL
str r2, [r1, #MSC1_OFFSET]
ldr r2, [r1, #MSC1_OFFSET]
@ write msc2
- ldr r2, =CFG_MSC2_VAL
+ ldr r2, =CONFIG_SYS_MSC2_VAL
str r2, [r1, #MSC2_OFFSET]
ldr r2, [r1, #MSC2_OFFSET]
@ Step 2b
@ write mecr
- ldr r2, =CFG_MECR_VAL
+ ldr r2, =CONFIG_SYS_MECR_VAL
str r2, [r1, #MECR_OFFSET]
@ write mcmem0
- ldr r2, =CFG_MCMEM0_VAL
+ ldr r2, =CONFIG_SYS_MCMEM0_VAL
str r2, [r1, #MCMEM0_OFFSET]
@ write mcmem1
- ldr r2, =CFG_MCMEM1_VAL
+ ldr r2, =CONFIG_SYS_MCMEM1_VAL
str r2, [r1, #MCMEM1_OFFSET]
@ write mcatt0
- ldr r2, =CFG_MCATT0_VAL
+ ldr r2, =CONFIG_SYS_MCATT0_VAL
str r2, [r1, #MCATT0_OFFSET]
@ write mcatt1
- ldr r2, =CFG_MCATT1_VAL
+ ldr r2, =CONFIG_SYS_MCATT1_VAL
str r2, [r1, #MCATT1_OFFSET]
@ write mcio0
- ldr r2, =CFG_MCIO0_VAL
+ ldr r2, =CONFIG_SYS_MCIO0_VAL
str r2, [r1, #MCIO0_OFFSET]
@ write mcio1
- ldr r2, =CFG_MCIO1_VAL
+ ldr r2, =CONFIG_SYS_MCIO1_VAL
str r2, [r1, #MCIO1_OFFSET]
/*SET_LED 3 */
@@ -229,14 +229,14 @@ mem_init:
@ Step 2c
@ fly-by-dma is defeatured on this part
@ write flycnfg
- @ldr r2, =CFG_FLYCNFG_VAL
+ @ldr r2, =CONFIG_SYS_FLYCNFG_VAL
@str r2, [r1, #FLYCNFG_OFFSET]
/* FIXME Does this sequence really make sense */
#ifdef REDBOOT_WAY
@ Step 2d
@ get the mdrefr settings
- ldr r3, =CFG_MDREFR_VAL
+ ldr r3, =CONFIG_SYS_MDREFR_VAL
@ extract DRI field (we need a valid DRI field)
@
@@ -319,7 +319,7 @@ mem_init:
#else
@ Step 2d
@ get the mdrefr settings
- ldr r3, =CFG_MDREFR_VAL
+ ldr r3, =CONFIG_SYS_MDREFR_VAL
@ write back mdrefr
@
@@ -363,7 +363,7 @@ mem_init:
@ Step 4d
@ fetch platform value of mdcnfg
@
- ldr r2, =CFG_MDCNFG_VAL
+ ldr r2, =CONFIG_SYS_MDCNFG_VAL
@ disable all sdram banks
@
@@ -400,7 +400,7 @@ mem_init:
@ Access memory *not yet enabled* for CBR refresh cycles (8)
@ - CBR is generated for all banks
- ldr r2, =CFG_DRAM_BASE
+ ldr r2, =CONFIG_SYS_DRAM_BASE
str r2, [r2]
str r2, [r2]
str r2, [r2]
@@ -430,7 +430,7 @@ mem_init:
@ Step 4h
@ write mdmrs
@
- ldr r2, =CFG_MDMRS_VAL
+ ldr r2, =CONFIG_SYS_MDMRS_VAL
str r2, [r1, #MDMRS_OFFSET]
@ Done Memory Init
@@ -449,7 +449,7 @@ mem_init:
@ Set interrupt mask register
@
- ldr r1, =CFG_ICMR_VAL
+ ldr r1, =CONFIG_SYS_ICMR_VAL
ldr r2, =ICMR
str r1, [r2]
@@ -465,7 +465,7 @@ mem_init:
@ set core clocks
@
- ldr r2, =CFG_CCCR_VAL
+ ldr r2, =CONFIG_SYS_CCCR_VAL
ldr r1, =CCCR
str r2, [r1]
@@ -488,7 +488,7 @@ mem_init:
@ Turn on needed clocks
@
ldr r1, =CKEN
- ldr r2, =CFG_CKEN_VAL
+ ldr r2, =CONFIG_SYS_CKEN_VAL
str r2, [r1]
/*SET_LED 7 */
generated by cgit v1.1 at 2024-11-16 00:41:57 +0000