diff options
Diffstat (limited to 'board/compulab/cm_fx6')
-rw-r--r-- | board/compulab/cm_fx6/cm_fx6.c | 51 |
1 files changed, 51 insertions, 0 deletions
diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index eb18dfc..b31e1f5 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -18,8 +18,10 @@ #include <asm/arch/crm_regs.h> #include <asm/arch/sys_proto.h> #include <asm/arch/iomux.h> +#include <asm/arch/mxc_hdmi.h> #include <asm/imx-common/mxc_i2c.h> #include <asm/imx-common/sata.h> +#include <asm/imx-common/video.h> #include <asm/io.h> #include <asm/gpio.h> #include <dm/platform_data/serial_mxc.h> @@ -28,6 +30,53 @@ DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_IMX_HDMI +static void cm_fx6_enable_hdmi(struct display_info_t const *dev) +{ + imx_enable_hdmi_phy(); +} + +struct display_info_t const displays[] = { + { + .bus = -1, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = detect_hdmi, + .enable = cm_fx6_enable_hdmi, + .mode = { + .name = "HDMI", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 40385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED, + } + }, +}; +size_t display_count = ARRAY_SIZE(displays); + +static void cm_fx6_setup_display(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + int reg; + + enable_ipu_clock(); + imx_setup_hdmi(); + reg = __raw_readl(&mxc_ccm->CCGR3); + reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK; + writel(reg, &mxc_ccm->CCGR3); +} +#else +static inline void cm_fx6_setup_display(void) {} +#endif /* CONFIG_VIDEO_IPUV3 */ + #ifdef CONFIG_DWC_AHSATA static int cm_fx6_issd_gpios[] = { /* The order of the GPIOs in the array is important! */ @@ -516,6 +565,8 @@ int board_init(void) if (ret) printf("Warning: I2C setup failed: %d\n", ret); + cm_fx6_setup_display(); + return 0; } |