diff options
Diffstat (limited to 'board/compulab/cm_fx6/spl.c')
-rw-r--r-- | board/compulab/cm_fx6/spl.c | 355 |
1 files changed, 355 insertions, 0 deletions
diff --git a/board/compulab/cm_fx6/spl.c b/board/compulab/cm_fx6/spl.c new file mode 100644 index 0000000..a3abc7b --- /dev/null +++ b/board/compulab/cm_fx6/spl.c @@ -0,0 +1,355 @@ +/* + * SPL specific code for Compulab CM-FX6 board + * + * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ + * + * Author: Nikita Kiryanov <nikita@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/gpio.h> +#include <asm/arch/mx6-ddr.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/imx-common/iomux-v3.h> +#include <fsl_esdhc.h> +#include "common.h" + +DECLARE_GLOBAL_DATA_PTR; + +enum ddr_config { + DDR_16BIT_256MB, + DDR_32BIT_512MB, + DDR_32BIT_1GB, + DDR_64BIT_1GB, + DDR_64BIT_2GB, + DDR_64BIT_4GB, + DDR_UNKNOWN, +}; + +/* + * Below DRAM_RESET[DDR_SEL] = 0 which is incorrect according to + * Freescale QRM, but this is exactly the value used by the automatic + * calibration script and it works also in all our tests, so we leave + * it as is at this point. + */ +#define CM_FX6_DDR_IOMUX_CFG \ + .dram_sdqs0 = 0x00000038, \ + .dram_sdqs1 = 0x00000038, \ + .dram_sdqs2 = 0x00000038, \ + .dram_sdqs3 = 0x00000038, \ + .dram_sdqs4 = 0x00000038, \ + .dram_sdqs5 = 0x00000038, \ + .dram_sdqs6 = 0x00000038, \ + .dram_sdqs7 = 0x00000038, \ + .dram_dqm0 = 0x00000038, \ + .dram_dqm1 = 0x00000038, \ + .dram_dqm2 = 0x00000038, \ + .dram_dqm3 = 0x00000038, \ + .dram_dqm4 = 0x00000038, \ + .dram_dqm5 = 0x00000038, \ + .dram_dqm6 = 0x00000038, \ + .dram_dqm7 = 0x00000038, \ + .dram_cas = 0x00000038, \ + .dram_ras = 0x00000038, \ + .dram_sdclk_0 = 0x00000038, \ + .dram_sdclk_1 = 0x00000038, \ + .dram_sdcke0 = 0x00003000, \ + .dram_sdcke1 = 0x00003000, \ + .dram_reset = 0x00000038, \ + .dram_sdba2 = 0x00000000, \ + .dram_sdodt0 = 0x00000038, \ + .dram_sdodt1 = 0x00000038, + +#define CM_FX6_GPR_IOMUX_CFG \ + .grp_b0ds = 0x00000038, \ + .grp_b1ds = 0x00000038, \ + .grp_b2ds = 0x00000038, \ + .grp_b3ds = 0x00000038, \ + .grp_b4ds = 0x00000038, \ + .grp_b5ds = 0x00000038, \ + .grp_b6ds = 0x00000038, \ + .grp_b7ds = 0x00000038, \ + .grp_addds = 0x00000038, \ + .grp_ddrmode_ctl = 0x00020000, \ + .grp_ddrpke = 0x00000000, \ + .grp_ddrmode = 0x00020000, \ + .grp_ctlds = 0x00000038, \ + .grp_ddr_type = 0x000C0000, + +static struct mx6sdl_iomux_ddr_regs ddr_iomux_s = { CM_FX6_DDR_IOMUX_CFG }; +static struct mx6sdl_iomux_grp_regs grp_iomux_s = { CM_FX6_GPR_IOMUX_CFG }; +static struct mx6dq_iomux_ddr_regs ddr_iomux_q = { CM_FX6_DDR_IOMUX_CFG }; +static struct mx6dq_iomux_grp_regs grp_iomux_q = { CM_FX6_GPR_IOMUX_CFG }; + +static struct mx6_mmdc_calibration cm_fx6_calib_s = { + .p0_mpwldectrl0 = 0x005B0061, + .p0_mpwldectrl1 = 0x004F0055, + .p0_mpdgctrl0 = 0x0314030C, + .p0_mpdgctrl1 = 0x025C0268, + .p0_mprddlctl = 0x42464646, + .p0_mpwrdlctl = 0x36322C34, +}; + +static struct mx6_ddr_sysinfo cm_fx6_sysinfo_s = { + .cs1_mirror = 1, + .cs_density = 16, + .bi_on = 1, + .rtt_nom = 1, + .rtt_wr = 0, + .ralat = 5, + .walat = 1, + .mif3_mode = 3, + .rst_to_cke = 0x23, + .sde_to_rst = 0x10, +}; + +static struct mx6_ddr3_cfg cm_fx6_ddr3_cfg_s = { + .mem_speed = 800, + .density = 4, + .rowaddr = 14, + .coladdr = 10, + .pagesz = 2, + .trcd = 1800, + .trcmin = 5200, + .trasmin = 3600, + .SRT = 0, +}; + +static void spl_mx6s_dram_init(enum ddr_config dram_config, bool reset) +{ + if (reset) + ((struct mmdc_p_regs *)MX6_MMDC_P0_MDCTL)->mdmisc = 2; + + switch (dram_config) { + case DDR_16BIT_256MB: + cm_fx6_sysinfo_s.dsize = 0; + cm_fx6_sysinfo_s.ncs = 1; + break; + case DDR_32BIT_512MB: + cm_fx6_sysinfo_s.dsize = 1; + cm_fx6_sysinfo_s.ncs = 1; + break; + case DDR_32BIT_1GB: + cm_fx6_sysinfo_s.dsize = 1; + cm_fx6_sysinfo_s.ncs = 2; + break; + default: + puts("Tried to setup invalid DDR configuration\n"); + hang(); + } + + mx6_dram_cfg(&cm_fx6_sysinfo_s, &cm_fx6_calib_s, &cm_fx6_ddr3_cfg_s); + udelay(100); +} + +static struct mx6_mmdc_calibration cm_fx6_calib_q = { + .p0_mpwldectrl0 = 0x00630068, + .p0_mpwldectrl1 = 0x0068005D, + .p0_mpdgctrl0 = 0x04140428, + .p0_mpdgctrl1 = 0x037C037C, + .p0_mprddlctl = 0x3C30303A, + .p0_mpwrdlctl = 0x3A344038, + .p1_mpwldectrl0 = 0x0035004C, + .p1_mpwldectrl1 = 0x00170026, + .p1_mpdgctrl0 = 0x0374037C, + .p1_mpdgctrl1 = 0x0350032C, + .p1_mprddlctl = 0x30322A3C, + .p1_mpwrdlctl = 0x48304A3E, +}; + +static struct mx6_ddr_sysinfo cm_fx6_sysinfo_q = { + .cs_density = 16, + .cs1_mirror = 1, + .bi_on = 1, + .rtt_nom = 1, + .rtt_wr = 0, + .ralat = 5, + .walat = 1, + .mif3_mode = 3, + .rst_to_cke = 0x23, + .sde_to_rst = 0x10, +}; + +static struct mx6_ddr3_cfg cm_fx6_ddr3_cfg_q = { + .mem_speed = 1066, + .density = 4, + .rowaddr = 14, + .coladdr = 10, + .pagesz = 2, + .trcd = 1324, + .trcmin = 59500, + .trasmin = 9750, + .SRT = 0, +}; + +static void spl_mx6q_dram_init(enum ddr_config dram_config, bool reset) +{ + if (reset) + ((struct mmdc_p_regs *)MX6_MMDC_P0_MDCTL)->mdmisc = 2; + + cm_fx6_ddr3_cfg_q.rowaddr = 14; + switch (dram_config) { + case DDR_16BIT_256MB: + cm_fx6_sysinfo_q.dsize = 0; + cm_fx6_sysinfo_q.ncs = 1; + break; + case DDR_32BIT_512MB: + cm_fx6_sysinfo_q.dsize = 1; + cm_fx6_sysinfo_q.ncs = 1; + break; + case DDR_64BIT_1GB: + cm_fx6_sysinfo_q.dsize = 2; + cm_fx6_sysinfo_q.ncs = 1; + break; + case DDR_64BIT_2GB: + cm_fx6_sysinfo_q.dsize = 2; + cm_fx6_sysinfo_q.ncs = 2; + break; + case DDR_64BIT_4GB: + cm_fx6_sysinfo_q.dsize = 2; + cm_fx6_sysinfo_q.ncs = 2; + cm_fx6_ddr3_cfg_q.rowaddr = 15; + break; + default: + puts("Tried to setup invalid DDR configuration\n"); + hang(); + } + + mx6_dram_cfg(&cm_fx6_sysinfo_q, &cm_fx6_calib_q, &cm_fx6_ddr3_cfg_q); + udelay(100); +} + +static int cm_fx6_spl_dram_init(void) +{ + unsigned long bank1_size, bank2_size; + + switch (get_cpu_type()) { + case MXC_CPU_MX6SOLO: + mx6sdl_dram_iocfg(64, &ddr_iomux_s, &grp_iomux_s); + + spl_mx6s_dram_init(DDR_32BIT_1GB, false); + bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000); + if (bank1_size == 0x40000000) + return 0; + + if (bank1_size == 0x20000000) { + spl_mx6s_dram_init(DDR_32BIT_512MB, true); + return 0; + } + + spl_mx6s_dram_init(DDR_16BIT_256MB, true); + bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000); + if (bank1_size == 0x10000000) + return 0; + + break; + case MXC_CPU_MX6D: + case MXC_CPU_MX6Q: + mx6dq_dram_iocfg(64, &ddr_iomux_q, &grp_iomux_q); + + spl_mx6q_dram_init(DDR_64BIT_4GB, false); + bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000); + if (bank1_size == 0x80000000) + return 0; + + if (bank1_size == 0x40000000) { + bank2_size = get_ram_size((long int *)PHYS_SDRAM_2, + 0x80000000); + if (bank2_size == 0x40000000) { + /* Don't do a full reset here */ + spl_mx6q_dram_init(DDR_64BIT_2GB, false); + } else { + spl_mx6q_dram_init(DDR_64BIT_1GB, true); + } + + return 0; + } + + spl_mx6q_dram_init(DDR_32BIT_512MB, true); + bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000); + if (bank1_size == 0x20000000) + return 0; + + spl_mx6q_dram_init(DDR_16BIT_256MB, true); + bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000); + if (bank1_size == 0x10000000) + return 0; + + break; + } + + return -1; +} + +static iomux_v3_cfg_t const uart4_pads[] = { + IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), +}; + +static void cm_fx6_setup_uart(void) +{ + SETUP_IOMUX_PADS(uart4_pads); + enable_uart_clk(1); +} + +#ifdef CONFIG_SPL_SPI_SUPPORT +static void cm_fx6_setup_ecspi(void) +{ + cm_fx6_set_ecspi_iomux(); + enable_cspi_clock(1, 0); +} +#else +static void cm_fx6_setup_ecspi(void) { } +#endif + +void board_init_f(ulong dummy) +{ + gd = &gdata; + arch_cpu_init(); + timer_init(); + cm_fx6_setup_ecspi(); + cm_fx6_setup_uart(); + get_clocks(); + preloader_console_init(); + gpio_direction_output(CM_FX6_GREEN_LED, 1); + if (cm_fx6_spl_dram_init()) { + puts("!!!ERROR!!! DRAM detection failed!!!\n"); + hang(); + } + + memset(__bss_start, 0, __bss_end - __bss_start); + board_init_r(NULL, 0); +} + +void spl_board_init(void) +{ + u32 boot_device = spl_boot_device(); + + if (boot_device == BOOT_DEVICE_SPI) + puts("Booting from SPI flash\n"); + else if (boot_device == BOOT_DEVICE_MMC1) + puts("Booting from MMC\n"); + else + puts("Unknown boot device\n"); +} + +#ifdef CONFIG_SPL_MMC_SUPPORT +static struct fsl_esdhc_cfg usdhc_cfg = { + .esdhc_base = USDHC3_BASE_ADDR, + .max_bus_width = 4, +}; + +int board_mmc_init(bd_t *bis) +{ + cm_fx6_set_usdhc_iomux(); + + usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + + return fsl_esdhc_initialize(bis, &usdhc_cfg); +} +#endif |