summaryrefslogtreecommitdiff
path: root/board/cogent
diff options
context:
space:
mode:
Diffstat (limited to 'board/cogent')
-rw-r--r--board/cogent/README8
-rw-r--r--board/cogent/flash.c20
-rw-r--r--board/cogent/lcd.c4
-rw-r--r--board/cogent/mb.h44
4 files changed, 38 insertions, 38 deletions
diff --git a/board/cogent/README b/board/cogent/README
index e6eef66..31ca187 100644
--- a/board/cogent/README
+++ b/board/cogent/README
@@ -80,16 +80,16 @@ To configure, perform the usual U-Boot configuration task of editing
"include/config_cogent_mpc8xx.h" and reviewing all the options and
settings in there. In particular, check the chip select values
installed into the memory controller's various option and base
-registers - these are set by the defines CFG_CMA_CSn_{BASE,SIZE} and
-CFG_{B,O}Rn_PRELIM. Also be careful of the clock settings installed
-into the SCCR - via the define CFG_SCCR. Finally, decide whether you
+registers - these are set by the defines CONFIG_SYS_CMA_CSn_{BASE,SIZE} and
+CONFIG_SYS_{B,O}Rn_PRELIM. Also be careful of the clock settings installed
+into the SCCR - via the define CONFIG_SYS_SCCR. Finally, decide whether you
want the serial console on motherboard serial port A or on one of the
8xx SMC ports, and set CONFIG_8xx_CONS_{SMC1,SMC2,NONE} accordingly
(NONE means use Cogent motherboard serial port A).
Then edit the file "cogent/config.mk". Firstly, set TEXT_BASE to be
the base address of the EPROM for the CPU module. This should be the
-same as the value selected for CFG_MONITOR_BASE in
+same as the value selected for CONFIG_SYS_MONITOR_BASE in
"include/config_cogent_*.h" (in fact, I have made this automatic via
the -DTEXT_BASE=... option in CPPFLAGS).
diff --git a/board/cogent/flash.c b/board/cogent/flash.c
index 942f33a..e6c85b6 100644
--- a/board/cogent/flash.c
+++ b/board/cogent/flash.c
@@ -24,11 +24,11 @@
#include <common.h>
#include <board/cogent/flash.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
#if defined(CONFIG_ENV_IS_IN_FLASH)
# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
# endif
# ifndef CONFIG_ENV_SIZE
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
@@ -121,7 +121,7 @@ c302f_probe(flash_info_t *fip, c302f_addr_t base)
fip->size += C302F_BNK_SIZE;
osc = fip->sector_count;
fip->sector_count += C302F_BNK_NBLOCKS;
- if ((nsc = fip->sector_count) >= CFG_MAX_FLASH_SECT)
+ if ((nsc = fip->sector_count) >= CONFIG_SYS_MAX_FLASH_SECT)
panic("Too many sectors in flash at address 0x%08lx\n",
(unsigned long)base);
@@ -264,7 +264,7 @@ c302f_write_word(c302f_addr_t addr, c302f_word_t value)
/* data polling for D7 */
start = get_timer (0);
do {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
retval = 1;
goto done;
}
@@ -295,7 +295,7 @@ flash_init(void)
flash_info_t *fip;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -303,7 +303,7 @@ flash_init(void)
total = 0L;
#if defined(CONFIG_CMA302)
- c302f_probe(fip, (c302f_addr_t)CFG_FLASH_BASE);
+ c302f_probe(fip, (c302f_addr_t)CONFIG_SYS_FLASH_BASE);
total += fip->size;
fip++;
#endif
@@ -320,10 +320,10 @@ flash_init(void)
* protect monitor and environment sectors
*/
-#if CFG_MONITOR_BASE == CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#endif
@@ -472,7 +472,7 @@ flash_erase(flash_info_t *info, int s_first, int s_last)
do {
now = get_timer(start);
- if (now - estart > CFG_FLASH_ERASE_TOUT) {
+ if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout (sect %d)\n", sect);
haderr = 1;
break;
diff --git a/board/cogent/lcd.c b/board/cogent/lcd.c
index 814b4c8..76f5ad1 100644
--- a/board/cogent/lcd.c
+++ b/board/cogent/lcd.c
@@ -197,7 +197,7 @@ void
lcd_printf(const char *fmt, ...)
{
va_list args;
- char buf[CFG_PBSIZE];
+ char buf[CONFIG_SYS_PBSIZE];
va_start(args, fmt);
(void)vsprintf(buf, fmt, args);
@@ -234,7 +234,7 @@ lcd_heartbeat(void)
void board_show_activity (ulong timestamp)
{
#ifdef CONFIG_STATUS_LED
- if ((timestamp % (CFG_HZ / 2) == 0)
+ if ((timestamp % (CONFIG_SYS_HZ / 2) == 0)
lcd_heartbeat ();
#endif
}
diff --git a/board/cogent/mb.h b/board/cogent/mb.h
index f6eaf0a..b3aba48 100644
--- a/board/cogent/mb.h
+++ b/board/cogent/mb.h
@@ -69,51 +69,51 @@
* 0xA000000-0xDFFFFFF.
*/
-#define CMA_MB_RAM_BASE (CFG_CMA_MB_BASE+0x0000000)
+#define CMA_MB_RAM_BASE (CONFIG_SYS_CMA_MB_BASE+0x0000000)
#define CMA_MB_RAM_SIZE 0x2000000 /* dip sws set actual size */
#if (CMA_MB_CAPS & CMA_MB_CAP_SLOT1)
-#define CMA_MB_SLOT1_BASE (CFG_CMA_MB_BASE+0x2000000)
+#define CMA_MB_SLOT1_BASE (CONFIG_SYS_CMA_MB_BASE+0x2000000)
#define CMA_MB_SLOT1_SIZE 0x2000000
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_SLOT2)
-#define CMA_MB_SLOT2_BASE (CFG_CMA_MB_BASE+0x4000000)
+#define CMA_MB_SLOT2_BASE (CONFIG_SYS_CMA_MB_BASE+0x4000000)
#define CMA_MB_SLOT2_SIZE 0x2000000
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_PCI)
-#define CMA_MB_STDPCI_BASE (CFG_CMA_MB_BASE+0x4000000)
+#define CMA_MB_STDPCI_BASE (CONFIG_SYS_CMA_MB_BASE+0x4000000)
#define CMA_MB_STDPCI_SIZE 0x1ff0000
-#define CMA_MB_V360EPC_BASE (CFG_CMA_MB_BASE+0x5ff0000)
+#define CMA_MB_V360EPC_BASE (CONFIG_SYS_CMA_MB_BASE+0x5ff0000)
#define CMA_MB_V360EPC_SIZE 0x10000
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_SLOT3)
-#define CMA_MB_SLOT3_BASE (CFG_CMA_MB_BASE+0x6000000)
+#define CMA_MB_SLOT3_BASE (CONFIG_SYS_CMA_MB_BASE+0x6000000)
#define CMA_MB_SLOT3_SIZE 0x2000000
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_PCI_EXT)
-#define CMA_MB_EXTPCI_BASE (CFG_CMA_MB_BASE+0xa000000)
+#define CMA_MB_EXTPCI_BASE (CONFIG_SYS_CMA_MB_BASE+0xa000000)
#define CMA_MB_EXTPCI_SIZE 0x4000000
#endif
-#define CMA_MB_ROMLOW_BASE (CFG_CMA_MB_BASE+0xe000000)
+#define CMA_MB_ROMLOW_BASE (CONFIG_SYS_CMA_MB_BASE+0xe000000)
#define CMA_MB_ROMLOW_SIZE 0x800000
#if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
-#define CMA_MB_FLLOW_EXEC_BASE (CFG_CMA_MB_BASE+0xe000000)
+#define CMA_MB_FLLOW_EXEC_BASE (CONFIG_SYS_CMA_MB_BASE+0xe000000)
#define CMA_MB_FLLOW_EXEC_SIZE 0x100000
-#define CMA_MB_FLLOW_RDWR_BASE (CFG_CMA_MB_BASE+0xe400000)
+#define CMA_MB_FLLOW_RDWR_BASE (CONFIG_SYS_CMA_MB_BASE+0xe400000)
#define CMA_MB_FLLOW_RDWR_SIZE 0x400000
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_RTC)
-#define CMA_MB_RTC_BASE (CFG_CMA_MB_BASE+0xe800000)
+#define CMA_MB_RTC_BASE (CONFIG_SYS_CMA_MB_BASE+0xe800000)
#define CMA_MB_RTC_SIZE 0x4000
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_SERPAR)
-#define CMA_MB_SERPAR_BASE (CFG_CMA_MB_BASE+0xe900000)
+#define CMA_MB_SERPAR_BASE (CONFIG_SYS_CMA_MB_BASE+0xe900000)
#define CMA_MB_SERIALB_BASE (CMA_MB_SERPAR_BASE+0x00)
#define CMA_MB_SERIALA_BASE (CMA_MB_SERPAR_BASE+0x40)
#define CMA_MB_PARALLEL_BASE (CMA_MB_SERPAR_BASE+0x80)
@@ -121,20 +121,20 @@
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_KBM)
-#define CMA_MB_PKBM_BASE (CFG_CMA_MB_BASE+0xe900100)
+#define CMA_MB_PKBM_BASE (CONFIG_SYS_CMA_MB_BASE+0xe900100)
#define CMA_MB_PKBM_SIZE 0x10
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_LCD)
-#define CMA_MB_LCD_BASE (CFG_CMA_MB_BASE+0xeb00000)
+#define CMA_MB_LCD_BASE (CONFIG_SYS_CMA_MB_BASE+0xeb00000)
#define CMA_MB_LCD_SIZE 0x10
#endif
-#define CMA_MB_DIPSW_BASE (CFG_CMA_MB_BASE+0xec00000)
+#define CMA_MB_DIPSW_BASE (CONFIG_SYS_CMA_MB_BASE+0xec00000)
#define CMA_MB_DIPSW_SIZE 0x10
#if (CMA_MB_CAPS & (CMA_MB_CAP_SLOT1|CMA_MB_CAP_SER2|CMA_MB_CAP_KBM))
-#define CMA_MB_SLOT1CFG_BASE (CFG_CMA_MB_BASE+0xf100000)
+#define CMA_MB_SLOT1CFG_BASE (CONFIG_SYS_CMA_MB_BASE+0xf100000)
#if (CMA_MB_CAPS & CMA_MB_CAP_SER2)
#define CMA_MB_SER2_BASE (CMA_MB_SLOT1CFG_BASE+0x80)
#define CMA_MB_SER2B_BASE (CMA_MB_SER2_BASE+0x00)
@@ -152,7 +152,7 @@
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_SLOT2)
-#define CMA_MB_SLOT2CFG_BASE (CFG_CMA_MB_BASE+0xf200000)
+#define CMA_MB_SLOT2CFG_BASE (CONFIG_SYS_CMA_MB_BASE+0xf200000)
#if defined(CONFIG_CMA302) && defined(CONFIG_CMA302_SLOT2)
#define CMA_MB_S2KBM_BASE (CMA_MB_SLOT2CFG_BASE+0x200)
#endif
@@ -160,7 +160,7 @@
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_PCI)
-#define CMA_MB_PCICTL_BASE (CFG_CMA_MB_BASE+0xf200000)
+#define CMA_MB_PCICTL_BASE (CONFIG_SYS_CMA_MB_BASE+0xf200000)
#define CMA_MB_PCI_V3CTL_BASE (CMA_MB_PCICTL_BASE+0x100)
#define CMA_MB_PCI_IDSEL_BASE (CMA_MB_PCICTL_BASE+0x200)
#define CMA_MB_PCI_IMASK_BASE (CMA_MB_PCICTL_BASE+0x300)
@@ -171,19 +171,19 @@
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_SLOT3)
-#define CMA_MB_SLOT3CFG_BASE (CFG_CMA_MB_BASE+0xf300000)
+#define CMA_MB_SLOT3CFG_BASE (CONFIG_SYS_CMA_MB_BASE+0xf300000)
#if defined(CONFIG_CMA302) && defined(CONFIG_CMA302_SLOT3)
#define CMA_MB_S3KBM_BASE (CMA_MB_SLOT3CFG_BASE+0x200)
#endif
#define CMA_MB_SLOT3CFG_SIZE 0x400
#endif
-#define CMA_MB_ROMHIGH_BASE (CFG_CMA_MB_BASE+0xf800000)
+#define CMA_MB_ROMHIGH_BASE (CONFIG_SYS_CMA_MB_BASE+0xf800000)
#define CMA_MB_ROMHIGH_SIZE 0x800000
#if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
-#define CMA_MB_FLHIGH_EXEC_BASE (CFG_CMA_MB_BASE+0xf800000)
+#define CMA_MB_FLHIGH_EXEC_BASE (CONFIG_SYS_CMA_MB_BASE+0xf800000)
#define CMA_MB_FLHIGH_EXEC_SIZE 0x100000
-#define CMA_MB_FLHIGH_RDWR_BASE (CFG_CMA_MB_BASE+0xfc00000)
+#define CMA_MB_FLHIGH_RDWR_BASE (CONFIG_SYS_CMA_MB_BASE+0xfc00000)
#define CMA_MB_FLHIGH_RDWR_SIZE 0x400000
#endif
generated by cgit v1.1 at 2024-11-10 23:11:47 +0000