summaryrefslogtreecommitdiff
path: root/board/cm-bf548/video.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/cm-bf548/video.c')
-rw-r--r--board/cm-bf548/video.c339
1 files changed, 339 insertions, 0 deletions
diff --git a/board/cm-bf548/video.c b/board/cm-bf548/video.c
new file mode 100644
index 0000000..49dbe77
--- /dev/null
+++ b/board/cm-bf548/video.c
@@ -0,0 +1,339 @@
+/*
+ * video.c - run splash screen on lcd
+ *
+ * Copyright (c) 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <stdarg.h>
+#include <common.h>
+#include <config.h>
+#include <malloc.h>
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/dma.h>
+#include <i2c.h>
+#include <linux/types.h>
+#include <devices.h>
+
+int gunzip(void *, int, unsigned char *, unsigned long *);
+
+#ifdef CONFIG_VIDEO
+
+#define DMA_SIZE16 2
+
+#include <asm/mach-common/bits/eppi.h>
+
+#include <asm/bfin_logo_230x230.h>
+
+#define LCD_X_RES 480 /*Horizontal Resolution */
+#define LCD_Y_RES 272 /* Vertical Resolution */
+
+#define LCD_BPP 24 /* Bit Per Pixel */
+#define LCD_PIXEL_SIZE (LCD_BPP / 8)
+#define DMA_BUS_SIZE 32
+#define ACTIVE_VIDEO_MEM_OFFSET 0
+
+/* -- Horizontal synchronizing --
+ *
+ * Timing characteristics taken from the SHARP LQ043T1DG01 datasheet
+ * (LCY-W-06602A Page 9 of 22)
+ *
+ * Clock Frequency 1/Tc Min 7.83 Typ 9.00 Max 9.26 MHz
+ *
+ * Period TH - 525 - Clock
+ * Pulse width THp - 41 - Clock
+ * Horizontal period THd - 480 - Clock
+ * Back porch THb - 2 - Clock
+ * Front porch THf - 2 - Clock
+ *
+ * -- Vertical synchronizing --
+ * Period TV - 286 - Line
+ * Pulse width TVp - 10 - Line
+ * Vertical period TVd - 272 - Line
+ * Back porch TVb - 2 - Line
+ * Front porch TVf - 2 - Line
+ */
+
+#define LCD_CLK (8*1000*1000) /* 8MHz */
+
+/* # active data to transfer after Horizontal Delay clock */
+#define EPPI_HCOUNT LCD_X_RES
+
+/* # active lines to transfer after Vertical Delay clock */
+#define EPPI_VCOUNT LCD_Y_RES
+
+/* Samples per Line = 480 (active data) + 45 (padding) */
+#define EPPI_LINE 525
+
+/* Lines per Frame = 272 (active data) + 14 (padding) */
+#define EPPI_FRAME 286
+
+/* FS1 (Hsync) Width (Typical)*/
+#define EPPI_FS1W_HBL 41
+
+/* FS1 (Hsync) Period (Typical) */
+#define EPPI_FS1P_AVPL EPPI_LINE
+
+/* Horizontal Delay clock after assertion of Hsync (Typical) */
+#define EPPI_HDELAY 43
+
+/* FS2 (Vsync) Width = FS1 (Hsync) Period * 10 */
+#define EPPI_FS2W_LVB (EPPI_LINE * 10)
+
+ /* FS2 (Vsync) Period = FS1 (Hsync) Period * Lines per Frame */
+#define EPPI_FS2P_LAVF (EPPI_LINE * EPPI_FRAME)
+
+/* Vertical Delay after assertion of Vsync (2 Lines) */
+#define EPPI_VDELAY 12
+
+#define EPPI_CLIP 0xFF00FF00
+
+/* EPPI Control register configuration value for RGB out
+ * - EPPI as Output
+ * GP 2 frame sync mode,
+ * Internal Clock generation disabled, Internal FS generation enabled,
+ * Receives samples on EPPI_CLK raising edge, Transmits samples on EPPI_CLK falling edge,
+ * FS1 & FS2 are active high,
+ * DLEN = 6 (24 bits for RGB888 out) or 5 (18 bits for RGB666 out)
+ * DMA Unpacking disabled when RGB Formating is enabled, otherwise DMA unpacking enabled
+ * Swapping Enabled,
+ * One (DMA) Channel Mode,
+ * RGB Formatting Enabled for RGB666 output, disabled for RGB888 output
+ * Regular watermark - when FIFO is 100% full,
+ * Urgent watermark - when FIFO is 75% full
+ */
+
+#define EPPI_CONTROL (0x20136E2E)
+
+static inline u16 get_eppi_clkdiv(u32 target_ppi_clk)
+{
+ u32 sclk = get_sclk();
+
+ /* EPPI_CLK = (SCLK) / (2 * (EPPI_CLKDIV[15:0] + 1)) */
+
+ return (((sclk / target_ppi_clk) / 2) - 1);
+}
+
+void Init_PPI(void)
+{
+ u16 eppi_clkdiv = get_eppi_clkdiv(LCD_CLK);
+
+ bfin_write_EPPI0_FS1W_HBL(EPPI_FS1W_HBL);
+ bfin_write_EPPI0_FS1P_AVPL(EPPI_FS1P_AVPL);
+ bfin_write_EPPI0_FS2W_LVB(EPPI_FS2W_LVB);
+ bfin_write_EPPI0_FS2P_LAVF(EPPI_FS2P_LAVF);
+ bfin_write_EPPI0_CLIP(EPPI_CLIP);
+
+ bfin_write_EPPI0_FRAME(EPPI_FRAME);
+ bfin_write_EPPI0_LINE(EPPI_LINE);
+
+ bfin_write_EPPI0_HCOUNT(EPPI_HCOUNT);
+ bfin_write_EPPI0_HDELAY(EPPI_HDELAY);
+ bfin_write_EPPI0_VCOUNT(EPPI_VCOUNT);
+ bfin_write_EPPI0_VDELAY(EPPI_VDELAY);
+
+ bfin_write_EPPI0_CLKDIV(eppi_clkdiv);
+
+/*
+ * DLEN = 6 (24 bits for RGB888 out) or 5 (18 bits for RGB666 out)
+ * RGB Formatting Enabled for RGB666 output, disabled for RGB888 output
+ */
+#if defined(CONFIG_VIDEO_RGB666)
+ bfin_write_EPPI0_CONTROL((EPPI_CONTROL & ~DLENGTH) | DLEN_18 |
+ RGB_FMT_EN);
+#else
+ bfin_write_EPPI0_CONTROL(((EPPI_CONTROL & ~DLENGTH) | DLEN_24) &
+ ~RGB_FMT_EN);
+#endif
+
+}
+
+#define DEB2_URGENT 0x2000 /* DEB2 Urgent */
+
+void Init_DMA(void *dst)
+{
+
+#if defined(CONFIG_DEB_DMA_URGENT)
+ *pEBIU_DDRQUE |= DEB2_URGENT;
+#endif
+
+ *pDMA12_START_ADDR = dst;
+
+ /* X count */
+ *pDMA12_X_COUNT = (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE;
+ *pDMA12_X_MODIFY = DMA_BUS_SIZE / 8;
+
+ /* Y count */
+ *pDMA12_Y_COUNT = LCD_Y_RES;
+ *pDMA12_Y_MODIFY = DMA_BUS_SIZE / 8;
+
+ /* DMA Config */
+ *pDMA12_CONFIG = WDSIZE_32 | /* 32 bit DMA */
+ DMA2D | /* 2D DMA */
+ FLOW_AUTO; /* autobuffer mode */
+}
+
+void Init_Ports(void)
+{
+ *pPORTF_MUX = 0x00000000;
+ *pPORTF_FER |= 0xFFFF; /* PPI0..15 */
+
+ *pPORTG_MUX &=
+ ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_2_MASK |
+ PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK);
+ *pPORTG_FER |= PG0 | PG1 | PG2 | PG3 | PG4; /* CLK, FS1, FS2, PPI16..17 */
+
+#if !defined(CONFIG_VIDEO_RGB666)
+ *pPORTD_MUX &=
+ ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_2_MASK |
+ PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK);
+ *pPORTD_MUX |=
+ (PORT_x_MUX_0_FUNC_4 | PORT_x_MUX_1_FUNC_4 | PORT_x_MUX_2_FUNC_4 |
+ PORT_x_MUX_3_FUNC_4 | PORT_x_MUX_4_FUNC_4 | PORT_x_MUX_5_FUNC_4);
+ *pPORTD_FER |= PD0 | PD1 | PD2 | PD3 | PD4 | PD5; /* PPI18..23 */
+#endif
+
+ *pPORTE_FER &= ~PE3; /* DISP */
+ *pPORTE_DIR_SET = PE3;
+ *pPORTE_SET = PE3;
+
+}
+
+void EnableDMA(void)
+{
+ *pDMA12_CONFIG |= DMAEN;
+}
+
+void DisableDMA(void)
+{
+ *pDMA12_CONFIG &= ~DMAEN;
+}
+
+/* enable and disable PPI functions */
+void EnablePPI(void)
+{
+ bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
+}
+
+void DisablePPI(void)
+{
+ bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() & ~EPPI_EN);
+}
+
+int video_init(void *dst)
+{
+ Init_Ports();
+ Init_DMA(dst);
+ EnableDMA();
+ Init_PPI();
+ EnablePPI();
+
+ return 0;
+}
+
+static void dma_bitblit(void *dst, fastimage_t *logo, int x, int y)
+{
+ if (dcache_status())
+ blackfin_dcache_flush_range(logo->data,
+ logo->data + logo->size);
+
+ bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
+
+ /* Setup destination start address */
+ bfin_write_MDMA_D0_START_ADDR(dst + ((x & -2) * LCD_PIXEL_SIZE)
+ + (y * LCD_X_RES * LCD_PIXEL_SIZE));
+ /* Setup destination xcount */
+ bfin_write_MDMA_D0_X_COUNT(logo->width * LCD_PIXEL_SIZE / DMA_SIZE16);
+ /* Setup destination xmodify */
+ bfin_write_MDMA_D0_X_MODIFY(DMA_SIZE16);
+
+ /* Setup destination ycount */
+ bfin_write_MDMA_D0_Y_COUNT(logo->height);
+ /* Setup destination ymodify */
+ bfin_write_MDMA_D0_Y_MODIFY((LCD_X_RES - logo->width) * LCD_PIXEL_SIZE +
+ DMA_SIZE16);
+
+ /* Setup Source start address */
+ bfin_write_MDMA_S0_START_ADDR(logo->data);
+ /* Setup Source xcount */
+ bfin_write_MDMA_S0_X_COUNT(logo->width * LCD_PIXEL_SIZE / DMA_SIZE16);
+ /* Setup Source xmodify */
+ bfin_write_MDMA_S0_X_MODIFY(DMA_SIZE16);
+
+ /* Setup Source ycount */
+ bfin_write_MDMA_S0_Y_COUNT(logo->height);
+ /* Setup Source ymodify */
+ bfin_write_MDMA_S0_Y_MODIFY(DMA_SIZE16);
+
+ /* Enable source DMA */
+ bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16 | DMA2D);
+ SSYNC();
+ bfin_write_MDMA_D0_CONFIG(WNR | DMAEN | WDSIZE_16 | DMA2D);
+
+ while (bfin_read_MDMA_D0_IRQ_STATUS() & DMA_RUN) ;
+
+ bfin_write_MDMA_S0_IRQ_STATUS(bfin_read_MDMA_S0_IRQ_STATUS() | DMA_DONE
+ | DMA_ERR);
+ bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() | DMA_DONE
+ | DMA_ERR);
+
+}
+
+void video_putc(const char c)
+{
+}
+
+void video_puts(const char *s)
+{
+}
+
+int drv_video_init(void)
+{
+ int error, devices = 1;
+ device_t videodev;
+
+ u8 *dst;
+ u32 fbmem_size =
+ LCD_X_RES * LCD_Y_RES * LCD_PIXEL_SIZE + ACTIVE_VIDEO_MEM_OFFSET;
+
+ dst = malloc(fbmem_size);
+
+ if (dst == NULL) {
+ printf("Failed to alloc FB memory\n");
+ return -1;
+ }
+#ifdef EASYLOGO_ENABLE_GZIP
+ unsigned char *data = EASYLOGO_DECOMP_BUFFER;
+ unsigned long src_len = EASYLOGO_ENABLE_GZIP;
+ if (gunzip(data, bfin_logo.size, bfin_logo.data, &src_len)) {
+ puts("Failed to decompress logo\n");
+ free(dst);
+ return -1;
+ }
+ bfin_logo.data = data;
+#endif
+
+ memset(dst + ACTIVE_VIDEO_MEM_OFFSET, bfin_logo.data[0],
+ fbmem_size - ACTIVE_VIDEO_MEM_OFFSET);
+
+ dma_bitblit(dst + ACTIVE_VIDEO_MEM_OFFSET, &bfin_logo,
+ (LCD_X_RES - bfin_logo.width) / 2,
+ (LCD_Y_RES - bfin_logo.height) / 2);
+
+ video_init(dst); /* Video initialization */
+
+ memset(&videodev, 0, sizeof(videodev));
+
+ strcpy(videodev.name, "video");
+ videodev.ext = DEV_EXT_VIDEO; /* Video extensions */
+ videodev.flags = DEV_FLAGS_SYSTEM; /* No Output */
+ videodev.putc = video_putc; /* 'putc' function */
+ videodev.puts = video_puts; /* 'puts' function */
+
+ error = device_register(&videodev);
+
+ return (error == 0) ? devices : error;
+}
+
+#endif