diff options
Diffstat (limited to 'board/cds/mpc8555cds/init.S')
| -rw-r--r-- | board/cds/mpc8555cds/init.S | 255 |
1 files changed, 0 insertions, 255 deletions
diff --git a/board/cds/mpc8555cds/init.S b/board/cds/mpc8555cds/init.S deleted file mode 100644 index 978bda5..0000000 --- a/board/cds/mpc8555cds/init.S +++ /dev/null @@ -1,255 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * Copyright 2002,2003, Motorola Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> -#include <asm/cache.h> -#include <asm/mmu.h> -#include <config.h> -#include <mpc85xx.h> - - -/* - * TLB0 and TLB1 Entries - * - * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR. - * However, CCSRBAR is then relocated to CFG_CCSRBAR right after - * these TLB entries are established. - * - * The TLB entries for DDR are dynamically setup in spd_sdram() - * and use TLB1 Entries 8 through 15 as needed according to the - * size of DDR memory. - * - * MAS0: tlbsel, esel, nv - * MAS1: valid, iprot, tid, ts, tsize - * MAS2: epn, sharen, x0, x1, w, i, m, g, e - * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr - */ - -#define entry_start \ - mflr r1 ; \ - bl 0f ; - -#define entry_end \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - - - .section .bootpg, "ax" - .globl tlb1_entry -tlb1_entry: - entry_start - - /* - * Number of TLB0 and TLB1 entries in the following table - */ - .long 13 - -#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR) - /* - * TLB0 4K Non-cacheable, guarded - * 0xff700000 4K Initial CCSRBAR mapping - * - * This ends up at a TLB0 Index==0 entry, and must not collide - * with other TLB0 Entries. - */ - .long TLB1_MAS0(0, 0, 0) - .long TLB1_MAS1(1, 0, 0, 0, 0) - .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1) -#else -#error("Update the number of table entries in tlb1_entry") -#endif - - /* - * TLB0 16K Cacheable, non-guarded - * 0xd001_0000 16K Temporary Global data for initialization - * - * Use four 4K TLB0 entries. These entries must be cacheable - * as they provide the bootstrap memory before the memory - * controler and real memory have been configured. - * - * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c, - * and must not collide with other TLB0 entries. - */ - .long TLB1_MAS0(0, 0, 0) - .long TLB1_MAS1(1, 0, 0, 0, 0) - .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR), - 0,0,0,0,0,0,0,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR), - 0,0,0,0,0,1,0,1,0,1) - - .long TLB1_MAS0(0, 0, 0) - .long TLB1_MAS1(1, 0, 0, 0, 0) - .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024), - 0,0,0,0,0,0,0,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024), - 0,0,0,0,0,1,0,1,0,1) - - .long TLB1_MAS0(0, 0, 0) - .long TLB1_MAS1(1, 0, 0, 0, 0) - .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024), - 0,0,0,0,0,0,0,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024), - 0,0,0,0,0,1,0,1,0,1) - - .long TLB1_MAS0(0, 0, 0) - .long TLB1_MAS1(1, 0, 0, 0, 0) - .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024), - 0,0,0,0,0,0,0,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024), - 0,0,0,0,0,1,0,1,0,1) - - - /* - * TLB 0: 16M Non-cacheable, guarded - * 0xff000000 16M FLASH - * Out of reset this entry is only 4K. - */ - .long TLB1_MAS0(1, 0, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1) - - /* - * TLB 1: 256M Non-cacheable, guarded - * 0x80000000 256M PCI1 MEM First half - */ - .long TLB1_MAS0(1, 1, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1) - - /* - * TLB 2: 256M Non-cacheable, guarded - * 0x90000000 256M PCI1 MEM Second half - */ - .long TLB1_MAS0(1, 2, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000), - 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000), - 0,0,0,0,0,1,0,1,0,1) - - /* - * TLB 3: 256M Non-cacheable, guarded - * 0xa0000000 256M PCI2 MEM First half - */ - .long TLB1_MAS0(1, 3, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE), 0,0,0,0,0,1,0,1,0,1) - - /* - * TLB 4: 256M Non-cacheable, guarded - * 0xb0000000 256M PCI2 MEM Second half - */ - .long TLB1_MAS0(1, 4, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE + 0x10000000), - 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE + 0x10000000), - 0,0,0,0,0,1,0,1,0,1) - - /* - * TLB 5: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe200_0000 16M PCI1 IO - * 0xe300_0000 16M PCI2 IO - */ - .long TLB1_MAS0(1, 5, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1) - - /* - * TLB 6: 64M Cacheable, non-guarded - * 0xf000_0000 64M LBC SDRAM - */ - .long TLB1_MAS0(1, 6, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1) - - /* - * TLB 7: 1M Non-cacheable, guarded - * 0xf8000000 1M CADMUS registers - */ - .long TLB1_MAS0(1, 7, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M) - .long TLB1_MAS2(E500_TLB_EPN(CADMUS_BASE_ADDR), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CADMUS_BASE_ADDR), 0,0,0,0,0,1,0,1,0,1) - - entry_end - -/* - * LAW(Local Access Window) configuration: - * - * 0x0000_0000 0x7fff_ffff DDR 2G - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M - * 0xe000_0000 0xe000_ffff CCSR 1M - * 0xe200_0000 0xe20f_ffff PCI1 IO 1M - * 0xe210_0000 0xe21f_ffff PCI2 IO 1M - * 0xf000_0000 0xf7ff_ffff SDRAM 128M - * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M - * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M - * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M - * - * Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - * - * The defines below are 1-off of the actual LAWAR0 usage. - * So LAWAR3 define uses the LAWAR4 register in the ECM. - */ - -#define LAWBAR0 0 -#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN) - -#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff) -#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff) -#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff) -#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M)) - -#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff) -#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M)) - -/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ -#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff) -#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)) - - .section .bootpg, "ax" - .globl law_entry - -law_entry: - entry_start - .long 6 - .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3 - .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5 - entry_end |