1 files changed, 205 insertions, 32 deletions

diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c
index b723641..242a68c 100644
--- a/board/cds/mpc8548cds/mpc8548cds.c
+++ b/board/cds/mpc8548cds/mpc8548cds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor.
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
@@ -26,6 +26,7 @@
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
 #include <spd.h>
 #include <miiphy.h>
 
@@ -33,10 +34,15 @@
 #include "../common/eeprom.h"
 #include "../common/via.h"
 
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern long int spd_sdram(void);
 
 void local_bus_init(void);
@@ -56,13 +62,6 @@ int checkboard (void)
 	/* PCI slot in USER bits CSR[6:7] by convention. */
 	uint pci_slot = get_pci_slot ();
 
-	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
-	uint pci1_32 = gur->pordevsr & 0x10000;	/* PORDEVSR[15] */
-	uint pci1_clk_sel = gur->porpllsr & 0x8000;	/* PORPLLSR[16] */
-	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
-
-	uint pci1_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
-
 	uint cpu_board_rev = get_cpu_board_revision ();
 
 	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
@@ -71,20 +70,6 @@ int checkboard (void)
 	printf ("CPU Board Revision %d.%d (0x%04x)\n",
 		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
 		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
-
-	printf ("    PCI1: %d bit, %s MHz, %s\n",
-		(pci1_32) ? 32 : 64,
-		(pci1_speed == 33000000) ? "33" :
-		(pci1_speed == 66000000) ? "66" : "unknown",
-		pci1_clk_sel ? "sync" : "async");
-
-	if (pci_dual) {
-		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
-			pci2_clk_sel ? "sync" : "async");
-	} else {
-		printf ("    PCI2: disabled\n");
-	}
-
 	/*
 	 * Initialize local bus.
 	 */
@@ -102,6 +87,8 @@ int checkboard (void)
 	 */
 	gur->tsec34ioovcr = 0xe7e0;	/*  1110 0111 1110 0xxx */
 
+	ecm->eedr = 0xffffffff;		/* clear ecm errors */
+	ecm->eeer = 0xffffffff;		/* enable ecm errors */
 	return 0;
 }
 
@@ -176,6 +163,9 @@ local_bus_init(void)
 	lbc->lcrr |= 0x00030000;
 
 	asm("sync;isync;msync");
+
+	lbc->ltesr = 0xffffffff;	/* Clear LBC error interrupts */
+	lbc->lteir = 0xffffffff;	/* Enable LBC error interrupts */
 }
 
 /*
@@ -301,7 +291,7 @@ testdram(void)
 }
 #endif
 
-#if defined(CONFIG_PCI)
+#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
 /* For some reason the Tundra PCI bridge shows up on itself as a
  * different device.  Work around that by refusing to configure it.
  */
@@ -320,21 +310,175 @@ static struct pci_config_table pci_mpc85xxcds_config_table[] = {
 	{},
 };
 
-static struct pci_controller hose[] = {
-	{ config_table: pci_mpc85xxcds_config_table,},
-#ifdef CONFIG_MPC85XX_PCI2
-	{},
-#endif
-};
-
+static struct pci_controller pci1_hose = {
+	config_table: pci_mpc85xxcds_config_table};
 #endif	/* CONFIG_PCI */
 
+#ifdef CONFIG_PCI2
+static struct pci_controller pci2_hose;
+#endif	/* CONFIG_PCI2 */
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif	/* CONFIG_PCIE1 */
+
+int first_free_busno=0;
+
 void
 pci_init_board(void)
 {
-#ifdef CONFIG_PCI
-	pci_mpc85xx_init(&hose);
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+
+
+#ifdef CONFIG_PCI1
+{
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pci1_hose;
+	struct pci_config_table *table;
+
+	uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;	/* PORDEVSR[15] */
+	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;	/* PORDEVSR[14] */
+	uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;	/* PORPLLSR[16] */
+
+	uint pci_agent = (host_agent == 3) || (host_agent == 4 ) || (host_agent == 6);
+
+	uint pci_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
+
+	if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
+		printf ("    PCI: %d bit, %s MHz, %s, %s, %s\n",
+			(pci_32) ? 32 : 64,
+			(pci_speed == 33333000) ? "33" :
+			(pci_speed == 66666000) ? "66" : "unknown",
+			pci_clk_sel ? "sync" : "async",
+			pci_agent ? "agent" : "host",
+			pci_arb ? "arbiter" : "external-arbiter"
+			);
+
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCI1_MEM_BASE,
+			       CFG_PCI1_MEM_PHYS,
+			       CFG_PCI1_MEM_SIZE,
+			       PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 1,
+			       CFG_PCI1_IO_BASE,
+			       CFG_PCI1_IO_PHYS,
+			       CFG_PCI1_IO_SIZE,
+			       PCI_REGION_IO);
+		hose->region_count = 2;
+
+		/* relocate config table pointers */
+		hose->config_table = \
+			(struct pci_config_table *)((uint)hose->config_table + gd->reloc_off);
+		for (table = hose->config_table; table && table->vendor; table++)
+			table->config_device += gd->reloc_off;
+
+		hose->first_busno=first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+		first_free_busno=hose->last_busno+1;
+		printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
+#ifdef CONFIG_PCIX_CHECK
+		if (!(gur->pordevsr & PORDEVSR_PCI)) {
+			/* PCI-X init */
+			if (CONFIG_SYS_CLK_FREQ < 66000000)
+				printf("PCI-X will only work at 66 MHz\n");
+
+			reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
+				| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
+			pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16);
+		}
 #endif
+	} else {
+		printf ("    PCI: disabled\n");
+	}
+}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+#endif
+
+#ifdef CONFIG_PCI2
+{
+	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
+	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
+	if (pci_dual) {
+		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
+			pci2_clk_sel ? "sync" : "async");
+	} else {
+		printf ("    PCI2: disabled\n");
+	}
+}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCI2; /* disable */
+#endif /* CONFIG_PCI2 */
+
+#ifdef CONFIG_PCIE1
+{
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pcie1_hose;
+	int pcie_ep =  (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
+
+	int pcie_configured  = io_sel >= 1;
+
+	if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
+		printf ("\n    PCIE connected to slot as %s (base address %x)",
+			pcie_ep ? "End Point" : "Root Complex",
+			(uint)pci);
+
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
+		}
+		printf ("\n");
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCI_MEMORY_BUS,
+			       CFG_PCI_MEMORY_PHYS,
+			       CFG_PCI_MEMORY_SIZE,
+			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			       CFG_PCIE1_MEM_BASE,
+			       CFG_PCIE1_MEM_PHYS,
+			       CFG_PCIE1_MEM_SIZE,
+			       PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			       CFG_PCIE1_IO_BASE,
+			       CFG_PCIE1_IO_PHYS,
+			       CFG_PCIE1_IO_SIZE,
+			       PCI_REGION_IO);
+
+		hose->region_count = 3;
+
+		hose->first_busno=first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+		printf ("PCIE on bus %d - %d\n",hose->first_busno,hose->last_busno);
+
+		first_free_busno=hose->last_busno+1;
+
+	} else {
+		printf ("    PCIE: disabled\n");
+	}
+ }
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif
+
 }
 
 int last_stage_init(void)
@@ -367,3 +511,32 @@ int last_stage_init(void)
 
 	return 0;
 }
+
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+	u32 *p;
+	int len;
+
+
+#ifdef CONFIG_PCI1
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = 0;
+		p[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+		debug("PCI@8000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+	}
+#endif
+
+#ifdef CONFIG_PCIE1
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@a000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = 0;
+		p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+		debug("PCI@a000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+	}
+#endif
+}
+#endif