1 files changed, 47 insertions, 17 deletions

diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c
index 5bc0890..7433ebf 100644
--- a/board/cds/mpc8548cds/mpc8548cds.c
+++ b/board/cds/mpc8548cds/mpc8548cds.c
@@ -27,9 +27,11 @@
 #include <asm/processor.h>
 #include <asm/immap_85xx.h>
 #include <spd.h>
+#include <miiphy.h>
 
 #include "../common/cadmus.h"
 #include "../common/eeprom.h"
+#include "../common/via.h"
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
@@ -293,26 +295,25 @@ testdram(void)
 #endif
 
 #if defined(CONFIG_PCI)
-
-/*
- * Initialize PCI Devices, report devices found.
+/* For some reason the Tundra PCI bridge shows up on itself as a
+ * different device.  Work around that by refusing to configure it.
  */
+void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
 
-#ifndef CONFIG_PCI_PNP
 static struct pci_config_table pci_mpc85xxcds_config_table[] = {
-    { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-      PCI_IDSEL_NUMBER, PCI_ANY_ID,
-      pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
-				   PCI_ENET0_MEMADDR,
-				   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
-      } },
-    { }
+	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
+	{0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
+	{0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, mpc85xx_config_via_usbide, {0,0,0}},
+	{0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
+	{0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
+	{0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, mpc85xx_config_via_power, {0,0,0}},
+	{0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}
 };
-#endif
 
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table: pci_mpc85xxcds_config_table,
+static struct pci_controller hose[] = {
+	{ config_table: pci_mpc85xxcds_config_table,},
+#ifdef CONFIG_MPC85XX_PCI2
+	{},
 #endif
 };
 
@@ -322,8 +323,37 @@ void
 pci_init_board(void)
 {
 #ifdef CONFIG_PCI
-	extern void pci_mpc85xx_init(struct pci_controller *hose);
-
 	pci_mpc85xx_init(&hose);
 #endif
 }
+
+int last_stage_init(void)
+{
+	unsigned short temp;
+
+	/* Change the resistors for the PHY */
+	/* This is needed to get the RGMII working for the 1.3+
+	 * CDS cards */
+	if (get_board_version() ==  0x13) {
+		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+				TSEC1_PHY_ADDR, 29, 18);
+
+		miiphy_read(CONFIG_MPC85XX_TSEC1_NAME,
+				TSEC1_PHY_ADDR, 30, &temp);
+
+		temp = (temp & 0xf03f);
+		temp |= 2 << 9;		/* 36 ohm */
+		temp |= 2 << 6;		/* 39 ohm */
+
+		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+				TSEC1_PHY_ADDR, 30, temp);
+
+		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+				TSEC1_PHY_ADDR, 29, 3);
+
+		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+				TSEC1_PHY_ADDR, 30, 0x8000);
+	}
+
+	return 0;
+}