diff options
Diffstat (limited to 'board/bf537-stamp/cmd_bf537led.c')
-rw-r--r-- | board/bf537-stamp/cmd_bf537led.c | 201 |
1 files changed, 201 insertions, 0 deletions
diff --git a/board/bf537-stamp/cmd_bf537led.c b/board/bf537-stamp/cmd_bf537led.c new file mode 100644 index 0000000..fa650f2 --- /dev/null +++ b/board/bf537-stamp/cmd_bf537led.c @@ -0,0 +1,201 @@ +/* + * U-boot - cmd_bf537led.c + * + * Copyright (C) 2006 Aaron Gage, Ocean Optics Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <config.h> +#include <command.h> +#include <asm/blackfin.h> +#include <asm-blackfin/string.h> +#ifdef CONFIG_BF537_STAMP_LEDCMD + +/* Define the command usage in a reusable way */ +#define USAGE_LONG \ + "led <number> <action>\n" \ + " <number> - Index (0-5) of LED to change, or \"all\"\n" \ + " <action> - Must be one of:\n" \ + " on off toggle\n" + +/* Number of LEDs supported by the board */ +#define NUMBER_LEDS 6 +/* The BF537 stamp has 6 LEDs. This mask indicates that all should be lit. */ +#define LED_ALL_MASK 0x003F + +void show_cmd_usage(void); +void set_led_state(int index, int state); +void configure_GPIO_to_output(int index); + +/* Map of LEDs according to their GPIO ports. This can be rearranged or + * otherwise changed to account for different GPIO configurations. + */ +int led_ports[] = { PF6, PF7, PF8, PF9, PF10, PF11 }; + +#define ACTION_TOGGLE -1 +#define ACTION_OFF 0 +#define ACTION_ON 1 + +#define LED_STATE_OFF 0 +#define LED_STATE_ON 1 + +/* This is a trivial atoi implementation since we don't have one available */ +int atoi(char *string) +{ + int length; + int retval = 0; + int i; + int sign = 1; + + length = strlen(string); + for (i = 0; i < length; i++) { + if (0 == i && string[0] == '-') { + sign = -1; + continue; + } + if (string[i] > '9' || string[i] < '0') { + break; + } + retval *= 10; + retval += string[i] - '0'; + } + retval *= sign; + return retval; +} + +int do_bf537led(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + int led_mask = 0; + int led_current_state = 0; + int action = ACTION_OFF; + int temp; + + if (3 != argc) { + /* Not enough arguments, so just show usage information */ + show_cmd_usage(); + return 1; + } + + if (strcmp(argv[1], "all") == 0) { + led_mask = LED_ALL_MASK; + } else { + temp = atoi(argv[1]); + if (temp < 0 || temp >= NUMBER_LEDS) { + printf("Invalid LED number [%s]\n", argv[1]); + show_cmd_usage(); + return 2; + } + led_mask |= (1 << temp); + } + + if (strcmp(argv[2], "off") == 0) { + action = ACTION_OFF; + } else if (strcmp(argv[2], "on") == 0) { + action = ACTION_ON; + } else if (strcmp(argv[2], "toggle") == 0) { + action = ACTION_TOGGLE; + } else { + printf("Invalid action [%s]\n", argv[2]); + show_cmd_usage(); + return 3; + } + + for (temp = 0; temp < NUMBER_LEDS; temp++) { + if ((led_mask & (1 << temp)) > 0) { + /* + * It is possible that the user has wired one of PF6-PF11 to + * something other than an LED, so this will only change a pin + * to output if the user has indicated a state change. This may + * happen a lot, but this way is safer than just setting all pins + * to output. + */ + configure_GPIO_to_output(temp); + + led_current_state = + ((*pPORTFIO & led_ports[temp]) > + 0) ? LED_STATE_ON : LED_STATE_OFF; + /* + printf("LED state for index %d (%x) is %d\n", temp, led_ports[temp], + led_current_state); + printf("*pPORTFIO is %x\n", *pPORTFIO); + */ + if (ACTION_ON == action + || (ACTION_TOGGLE == action + && 0 == led_current_state)) { + printf("Turning LED %d on\n", temp); + set_led_state(temp, LED_STATE_ON); + } else { + printf("Turning LED %d off\n", temp); + set_led_state(temp, LED_STATE_OFF); + } + } + } + + return 0; +} + +/* + * The GPIO pins that go to the LEDs on the BF537 stamp must be configured + * as output. This function simply configures them that way. This could + * be done to all of the GPIO lines at once, but if a user is using a + * custom board, this will try to be nice and only change the GPIO lines + * that the user specifically names. + */ +void configure_GPIO_to_output(int index) +{ + int port; + + port = led_ports[index]; + + /* Clear the Port F Function Enable Register */ + *pPORTF_FER &= ~port; + /* Set the Port F I/O direction register */ + *pPORTFIO_DIR |= port; + /* Clear the Port F I/O Input Enable Register */ + *pPORTFIO_INEN &= ~port; +} + +/* Enforce the given state on the GPIO line for the indicated LED */ +void set_led_state(int index, int state) +{ + int port; + + port = led_ports[index]; + + if (LED_STATE_OFF == state) { + /* Clear the bit to turn off the LED */ + *pPORTFIO &= ~port; + } else { + /* Set the bit to turn on the LED */ + *pPORTFIO |= port; + } +} + +/* Display usage information */ +void show_cmd_usage() +{ + printf("Usage:\n%s", USAGE_LONG); +} + +/* Register information for u-boot to find this command */ +U_BOOT_CMD(led, 3, 1, do_bf537led, + "led- Control BF537 stamp LEDs\n", USAGE_LONG); + +#endif |